P 780 2 problems I

Similar Questions

• Upgrade to 4 GB Ram problem - computer desktop OptiPlex 780...

  Nice day

  Thank you for your services.

  I am trying to upgrade my desktop computer model # OptiPlex 780 and it's the standard I force the affected elements before, after I check what is the speed of compatible ram, voltage and timing, then I bought this model:

  KHX1333C9D3B1K2 / 8G

  Sound of Kingston - hyper-x blue or you can check the details by the Munificent code above or visiting them this link:

  http://www.Kingston.com/datasheets/KHX1333C9D3B1K2_8G.PDF

  The problem:

  When I delete the original 2 GB Ram and installed this 4 GB ram on the first location, the departure of light 1 # & 3 led with sound as continuous hum without starter or windows interface.

  I tried to:

  -Change the slot

  -Fix the maximum ram which is 4 GB for each slot up to 16 GB

  -Correction of the original 2GB ram in slot 1 then fix the new ram in slot 2 or 3 and 4

  -Update the BIOS to version 15A and update all the drivers from dell.com

  -I make sure that the ram is compatible Guide Dell book on this link:

  http://i.Dell.com/sites/content/business/solutions/engineering-docs/en/documents/OptiPlex-780-tech-guide.PDF

  So please help me in this case, it is urgent and I used this computer in the main office and my work.

  Thanks and regards,

  BYQ-

  svanwormer

  I have a 780 with the Intel E7500, Q45 chipset and A15 BIOS CPU and I'm running 12 GB of DDR3 RAM. Two 4 GB and 2 GB

  Yep, catilley, I'm afraid, you're just wrong on this point - your info is old, apparently.  I, too, running an Optiplex 780 with an Intel Core 2 Quad 9550 CPU, chipset Q45 and 12 GB of DDR3 memory - in fact, it's the same machine that I write this response at this time.

  As I posted a year ago on this thread, the official manual of Service from Dell for Optiplex 780 confirms it will take up to 16 MB of memory DDR3, 4 GB per slot.  Here is the link, directly from the Dell website:

  

• Driver installation problem Windows XP Home on Satellite L450D-11 t

  I bought a laptop SATELLITE L450D-11 t with windows 7 and I want to use a USB stick for internet, but it requires a previous version of the operating system.
  So I installed windows xp, but on this site, it is not all drivers (motherboard, video, audio, network) compatible.

  Analysis of the situation, I found the driver for audio on the Realtek site but on the mother/video card driver, I have a few problems:
  the AMD 780 G chipset and the display hardware is an ATi Radeon HD 3200. On the AMD website, I found a package with all the necessary drivers, but during the installation of the system restarted itself each time I start the installation. I opened the event viewer to see if there is an error, but nothing.
  I restarted the pc mode provvisional: he can't complete the installation, but it gives an error "Unable to open driver for tracking" or something like that.

  Is there something wrong? I forgot to do something?
  Thank you

  Hello

  Why you n t take an another USB compatible with Windows 7? In my opinion, it would be easier to reinstall the whole laptop but ok, it s your decision ;)

  As far as I know the drivers on page AMD intended for office use only, so I think that they will not work on mobile chips. But maybe the only corrupt the downloaded driver files, then try to download again.

  As I've already said, I would choose another USB key. This laptop is designed for the new Windows 7 and everything should work properly on the new operating system.

• H8 - 1240t update graphic card problems

  Before you start this is what I have:

  H8 - 1240t Desktop

  Windows 7 Home Premium 64-bit

  Intel Core i7 - 2600 k

  16GBs ram

  The computer came with an AMD Radeon HD 7570 1 GB DDR3 graphics card which I have been recently trying to improve my dream of an EVGA Geforce GTX 780 / 3 gb GDDR5 SC ACX. I already upgraded my PSU from a 300w to a 750w power to manage the new graphics card. During the installation of this new graphics card the computer will start show him Press esc for boot menu screen and after a while, it will go to a black screen with a cursor. I put in the disk of driver installation accompanying the GTX 780 from the start. Now, I looked online and saw a lot of people who update their bios but I couldn't find really any help for a motherboard very FRIEND 7.09 Pegatron 2ad5. And the actual task of updating a bios seems daunting. Attracted me here to see if it was something I had to do or if there is something else I could try or should I give up on my dream to get the GTX 780 to work in my config. Thanks in advance to one that meets. =)

  Hello

  Most of the 7xx manufactured NVIDIA video cards are active UEFI and your PC does not have the right level of BIOS.  Your PC needs to have a BIOS version 8 level.  If the BIOS of your PCs supported the UEFI mode and secure boot you have a different problem.

  Looking for a different graphics card that requires no UEFI BIOS. You may be able to locate a Sapphire AMD graphics card that will work and be near the same level of performance. Glance at the series Sapphire R9which are not marked UEFI.

  The 780 NVIDIA or any graphics card close in performance will eventually be GPU bound.  This means that the graphics card will not reach its full potential of your PC with the design of the processor and motherboard.

• El Capitan 10.11.3 multiple problems

  Since I updated to El Capitan 10.11.3, I have had two very annoying problems. The first is a problem of tip of offset. The lag spike occurs, on average, every 20 seconds to 3 minutes, lasting about 5 to 15 seconds. It affects my entire computer, not just a single application. If there are moments where it will go up to 15 minutes without a hint of lag. I used MacKeeper to clean all junk files, restarted my computer and have even deleted all my photos (I them backed up, so no need to worry). I went to look at my use of the CPU and memory, but none of them go above 5% usage. I have 510 GB free 1.01 TB. My computer has 4 lag spikes while typing this. This is how it is.

  My second problem is my magic mouse and keyboard connection lost when my computer goes to sleep. They lose the connection and cannot reconnect. I have to turn off my computer completely using the top button is back and turn it back on for them to reconnect. I had this problem since 10.11.2

  Care of my computer:

  iMac 27 inches, end of 2013

  Processor, 3.5 GHz Intel Core i7

  Memory, 32 GB 1600 MHz DDR3

  Graphics, NVIDIA GeForce GTX M 780, 4096 MB

  My humble opinion your problems could very well do with Mackeeper.  Search for "mackeeper' here in the Discussions.  You will see that the warnings on this subject are ubiquitous.

• Problems with El Capitan on iMac 27 "end 2013

  Hello. I had some problems with my end 2013 27 "iMac. The majority of my problems seems to be turning around not being able to wake from its slumber unless I hard boot the system. I am running the operating system more recent 10.11.3

  Sleep problems have started with my installation of El Capitan. I have reset the PRAM the SMC and have disabled the hibernation and Energy Saver preferences are set to never spin down hard drives or screen saver. Problem persists.

  I also experience unexpected freezes. When these occur usually, audio on my system continues (if listening to iTunes or in a video game, the audio keeps going) but there is no response from the mouse or the movement on the screen at all. key board does not respond and mouse is frozen. The last time I had it's happen I had a panic the kernel to reboot (see below for the report)

  I tried everything I can think of. I've scoured the forums on the internet for help and support. Im not sure if this is hardware or software related. I tried to unplug all of my devices - I have several hard drives USB and Thunderbolt. I have a second monitor connected via the bolt of lightning as well. This could be a video card problem?

  I have used the EtreCheck software and have gotten several things that make me wonder if it's the software however, it seems that somewhere I still have pieces of teamviewer lingering around, even if I had uninstalled the software and I can't find anything in the spotlight for her. Here is an excerpt of my report...

  Launch of Agents:

  [loading] com.adobe.AAM.Updater - 1.0.plist [Support]

  com.adobe.ARMDCHelper.cc24aef4a1b90ed56a... plist [failure] [Support]

  com.adobe.AdobeCreativeCloud.plist [failure] [Support]

  com.coupons.coupond.plist [loading] [Support]

  [ongoing] com.extensis.FMCore.plist [Support]

  [loading] com.oracle.java.Java - Updater.plist [Support]

  com.TeamViewer.TeamViewer.plist [failure] [support] [details]

  com.TeamViewer.teamviewer_desktop.plist [failure] [Support]

  Top of the process of memory:

  2.28 GB com.apple.WebKit.WebContent (15)

  2.21 GB mds_stores

  1.54 GB kernel_task

  467 MB softwareupdated

  393 MB Spotify Helper (2)

  Some things I noticed - I had questions on shut down the system. My computer completely sometimes turns. I have to force quit the finder or the dock still will remain open and prevent the closing down. If this happens, then I need hard closed by pushing the power button until the device turns off. My system is INCREDIBLY slow sometimes since the upgrade as well at el capitan.

  I had a few problems with the big Adobe applications as well - sometimes illustrator or photoshop does any open or apps say they are open in the dock and in the force to quit smoking, but do not show in the activity monitor. In this case I have to restart my system for most work. force quit does not help them.

  Sorry for the long post, but I have worked on Macs since OS7 and even worked in an apple store genius bar for awhile so I generally know what I can do to fix these but I can't get it probably remain fixed. I thought better to have as much information as possible. My next step is to reload the entire OS, but I have a lot of work here that I'm afraid to lose (even though I have several back ups via time machine and other copies on external drives)

  Any help and advice would be most appreciated!

  Thank you!

  Anonymous UUID: F83C5E07-71C2-E17D-65DC-8C631B76C5D0

  Mon Jan 25 12:21:24 2016

  Panic report *.

  panic (cpu 0 0xffffff800b5254ce appellant): "an element of the liberated area has been modified in the kalloc.128 area: expected 0xffffff803c0bd080 but found at the offset 0 128 in the 0xffffff803c0bdf00 element, 0xffffff803c4bd080, bits 0x400000 changed cookies 0x3f001131d5890016 0x53521f0c6426431"@/Library/Caches/com.apple.xbs/Sources/xnu/xnu-3248.30.4/osfm k/kern/zalloc.c:503.

  Backtrace (CPU 0), frame: return address

  0xffffff82c89ab180: 0xffffff800b4df792

  0xffffff82c89ab200: 0xffffff800b5254ce

  0xffffff82c89ab270: 0xffffff800b524f76

  0xffffff82c89ab2b0: 0xffffff800b523c02

  0xffffff82c89ab3e0: 0xffffff800ba804db

  0xffffff82c89ab400: 0xffffff7f8d12b505

  0xffffff82c89ab440: 0xffffff7f8d12b6c7

  0xffffff82c89ab460: 0xffffff7f8d2328df

  0xffffff82c89ab490: 0xffffff7f8d25e96c

  0xffffff82c89ab4d0: 0xffffff7f8d25e4c6

  0xffffff82c89ab500: 0xffffff7f8d25e0f0

  0xffffff82c89ab540: 0xffffff7f8d3e71fc

  0xffffff82c89ab590: 0xffffff7f8d3dbf7a

  0xffffff82c89ab720: 0xffffff7f8d20d227

  0xffffff82c89ab7d0: 0xffffff7f8d14c1ac

  0xffffff82c89ab890: 0xffffff7f8d159c6d

  0xffffff82c89ab900: 0xffffff7f8d09025d

  0xffffff82c89ab970: 0xffffff7f8d0964e6

  0xffffff82c89ab9b0: 0xffffff7f8d13ea07

  0xffffff82c89abab0: 0xffffff7f8d098872

  0xffffff82c89abb50: 0xffffff7f8c8619c4

  0xffffff82c89abb80: 0xffffff800bab7ef8

  0xffffff82c89abbf0: 0xffffff7f8c861a2b

  0xffffff82c89abc40: 0xffffff7f8d098727

  0xffffff82c89abc90: 0xffffff800b7607d4

  0xffffff82c89abce0: 0xffffff800b758523

  0xffffff82c89abdb0: 0xffffff800b75873f

  0xffffff82c89abde0: 0xffffff800b9cf9d6

  0xffffff82c89abe20: 0xffffff800b988cab

  0xffffff82c89abe50: 0xffffff800b9ca37d

  0xffffff82c89abf60: 0xffffff800ba2a731

  0xffffff82c89abfb0: 0xffffff800b5f0a36

  Extensions of core in backtrace:

  (3.2) com.apple.iokit.IONetworkingFamily [35F05D83-F2EC-3047-8422-E65BAF0144B2] @0 xffffff7f8c859000-> 0xffffff7f8c885fff

  com.apple.iokit.IO80211Family (1110.26) [A7F70957-7DBC-39ED-ACA7-3A7BA653D115] @0 x ffffff7f8d041000-> 0xffffff7f8d114fff

  dependency: com.apple.driver.corecapture (1.0.4) [B80FBC9C-24F9-3399-B347-01816E4EDD46] @ fff7f8d017000 0xfff

  dependency: com.apple.kec.corecrypto (1.0) [D6E082B5-93B2-3FF0-AB4B-4AA310173CE8] @0xffffff7f8 c1e9000

  dependency: (3.2) com.apple.iokit.IONetworkingFamily [35F05D83-F2EC-3047-8422-E65BAF0144B2] @0 xffffff7f8c859000

  com.apple.driver.AirPort.Brcm4360 (1020.17.1a1) [1D44A63A - 83 A 8-335C-BBF5-62965766 1B93]@0xffffff7f8d11e000-> 0xffffff7f8d7dcfff

  dependency: com.apple.driver.corecapture (1.0.4) [B80FBC9C-24F9-3399-B347-01816E4EDD46] @ fff7f8d017000 0xfff

  dependency: com.apple.driver.mDNSOffloadUserClient (1.0.1b8) [DC173C97-9F4D - 39 d 5-8814-68B0BAD 27370]@0xffffff7f8cd42000]

  dependency: (1110.26) com.apple.iokit.IO80211Family [A7F70957-7DBC-39ED-ACA7-3A7BA653D115] @0 x ffffff7f8d041000

  dependency: com.apple.iokit.IOPCIFamily (2.9) [F398CE94-0FBD-3E8E-A7AB-55F7F05A81ED] @ 7f8bd1a000 0xffffff

  dependency: (3.2) com.apple.iokit.IONetworkingFamily [35F05D83-F2EC-3047-8422-E65BAF0144B2] @0 xffffff7f8c859000

  The process corresponding to the current thread BSD name: airportd

  Mac OS version:

  15 D 21

  Kernel version:

  15.3.0 Darwin kernel version: Thu Dec 10 18:40:58 PST 2015; root:XNU-3248.30.4~1/RELEASE_X86_64

  Kernel UUID: DECC9F02-27D7-31F0-9599-A9EF2873902C

  Slide kernel: 0x000000000b200000

  Text of core base: 0xffffff800b400000

  Text __HIB base: 0xffffff800b300000

  Name of system model: iMac14, 2 (Mac-27ADBB7B4CEE8E61)

  Availability of the system in nanoseconds: 67730969846

  last load kext to 62344320534: com.apple.iokit.IOBluetoothSerialManager 4.4.3f4 (addr 0xffffff7f8cf42000 size 57344)

  kexts responsible:

  com.seagate.driver.PowSecLeafDriver_10_5 5.2.7

  com.seagate.driver.PowSecDriverCore 5.2.7

  com.apple.iokit.IOBluetoothSerialManager 4.4.3f4

  com.apple.driver.AppleMikeyHIDDriver 124

  com.apple.driver.AppleOSXWatchdog 1

  com.apple.driver.AppleGraphicsDevicePolicy 3.7.7

  com.apple.driver.AppleHDAHardwareConfigDriver 272.51.3

  com.apple.driver.AppleHDA 272.51.3

  com.apple.driver.AppleUpstreamUserClient 3.6.1

  com Apple.Driver.pmtelemetry 1

  com.apple.iokit.IOUserEthernet 1.0.1

  com.apple.driver.AppleIntelHD5000Graphics 10.1.2

  com.apple.driver.AppleMuxControl 3.12.6

  com.apple.GeForce 10.0.8

  com.apple.Dont_Steal_Mac_OS_X 7.0.0

  com.apple.driver.AppleMikeyDriver 272.51.3

  com.apple.driver.AppleBacklight 170.8.8

  com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.4.3f4

  com.apple.driver.AppleHV 1

  com.apple.driver.AppleSMCLMU 208

  com.apple.driver.AppleLPC 3.1

  com.apple.driver.AppleFIVRDriver 4.1.0

  com.apple.driver.AppleIntelFramebufferAzul 10.1.2

  com.apple.driver.AppleMCCSControl 1.2.13

  com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0

  com.apple.driver.AppleIntelSlowAdaptiveClocking 4.0.0

  com.apple.driver.AppleThunderboltIP 3.0.8

  com.apple.nvidia.NVDAStartup 10.0.8

  com.apple.iokit.IOBluetoothUSBDFU 4.4.3f4

  com.apple.driver.AppleUSBStorageCoexistentDriver 3.7.1

  com.apple.iokit.SCSITaskUserClient 3.7.7

  com.apple.driver.AppleFireWireStorage 3.7.1

  com.apple.driver.initioFWBridge 3.7.1

  com.apple.driver.IOFireWireSerialBusProtocolSansPhysicalUnit 3.7.1

  com.apple.driver.LSI_FW_500 3.7.1

  com.apple.driver.Oxford_Semi 3.7.1

  com.apple.driver.StorageLynx 3.7.1

  com.apple.driver.AppleFileSystemDriver 3.0.1

  com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1

  com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0

  com.apple.BootCache 38

  2.8.5 com.apple.iokit.IOAHCIBlockStorage

  com.apple.driver.AppleFWOHCI 5.5.2

  com.apple.driver.AppleSDXC 1.7.0

  com.apple.iokit.AppleBCM5701Ethernet 10.1.12

  com.apple.driver.AirPort.Brcm4360 1020.17.1a1

  com.apple.driver.AppleAHCIPort 3.1.8

  com.apple.driver.AppleRTC 2.0

  com.apple.driver.AppleACPIButtons 4.0

  com.apple.driver.AppleHPET 1.8

  com.apple.driver.AppleSMBIOS 2.1

  com.apple.driver.AppleACPIEC 4.0

  com.apple.driver.AppleAPIC 1.7

  com Apple.NKE.applicationfirewall 163

  com Apple.Security.Quarantine 3

  com.apple.security.TMSafetyNet 8

  com.apple.iokit.IOSerialFamily 11

  com.apple.driver.DspFuncLib 272.51.3

  com.apple.kext.OSvKernDSPLib 525

  com.apple.driver.AppleGraphicsControl 3.12.6

  com.apple.nvidia.driver.NVDAGK100Hal 10.0.8

  com.apple.nvidia.driver.NVDAResman 10.0.8

  com.apple.iokit.IOSurface 108.0.1

  com.apple.driver.CoreCaptureResponder 1

  com.apple.iokit.IOFireWireIP 2.2.6

  com.apple.driver.AppleBacklightExpert 1.1.0

  com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.4.3f4

  com.apple.iokit.IOBluetoothFamily 4.4.3f4

  com.apple.driver.AppleHDAController 272.51.3

  com.apple.iokit.IOHDAFamily 272.51.3

  com.apple.iokit.IOAudioFamily 204.3

  com.apple.vecLib.kext 1.2.0

  com.apple.driver.AppleSMBusPCI 1.0.14d1

  com.apple.iokit.IONDRVSupport 2.4.1

  com.apple.AppleGraphicsDeviceControl 3.12.6

  com.apple.iokit.IOAcceleratorFamily2 205,1

  com.apple.driver.AppleSMBusController 1.0.14d1

  com.apple.iokit.IOGraphicsFamily 2.4.1

  com.apple.driver.IOPlatformPluginLegacy 1.0.0

  com.apple.driver.X86PlatformPlugin 1.0.0

  com.apple.driver.AppleSMC 3.1.9

  com.apple.driver.IOPlatformPluginFamily 6.0.0d7

  com.apple.iokit.IOSlowAdaptiveClockingFamily 1.0.0

  com.apple.driver.AppleThunderboltEDMSink 4.1.1

  com.apple.iokit.IOAHCISerialATAPI 2.6.2

  com.apple.driver.AppleHIDKeyboard 181

  com.apple.driver.usb.IOUSBHostHIDDevice 1.0.1

  com.apple.driver.AppleThunderboltDPInAdapter 4.1.3

  com.apple.driver.AppleThunderboltDPOutAdapter 4.1.3

  com.apple.driver.AppleThunderboltDPAdapterFamily 4.1.3

  com.apple.driver.AppleThunderboltPCIUpAdapter 2.0.2

  com.apple.driver.AppleThunderboltPCIDownAdapter 2.0.2

  com.apple.iokit.IOUSBMassStorageClass 4.0.2

  com.apple.iokit.IOUSBMassStorageDriver 1.0.0

  com.apple.driver.usb.AppleUSBHostCompositeDevice 1.0.1

  com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.7.7

  com.apple.iokit.IOBDStorageFamily 1.8

  com.apple.iokit.IODVDStorageFamily 1.8

  com.apple.iokit.IOCDStorageFamily 1.8

  com.apple.iokit.IOFireWireSerialBusProtocolTransport 2.5.1

  com.apple.driver.usb.AppleUSBHub 1.0.1

  com.apple.driver.AppleUSBMergeNub 900.4.1

  com.apple.driver.AppleXsanScheme 3

  com.apple.iokit.IOFireWireSBP2 4.2.7

  com.apple.iokit.IOSCSIBlockCommandsDevice 3.7.7

  com.apple.iokit.IOSCSIArchitectureModelFamily 3.7.7

  4.5.8 com.apple.iokit.IOFireWireFamily

  com.apple.driver.AppleThunderboltNHI 4.0.4

  com.apple.iokit.IOThunderboltFamily 5.1.0

  com.apple.iokit.IOEthernetAVBController 1.0.3b3

  com.apple.iokit.IO80211Family 1110.26

  com.apple.driver.mDNSOffloadUserClient 1.0.1b8

  com.apple.iokit.IONetworkingFamily 3.2

  com Apple.Driver.corecapture 1.0.4

  com.apple.iokit.IOAHCIFamily 2.8.1

  com.apple.driver.usb.AppleUSBXHCIPCI 1.0.1

  com.apple.driver.usb.AppleUSBXHCI 1.0.1

  com.apple.iokit.IOUSBFamily 900.4.1

  com.apple.iokit.IOUSBHostFamily 1.0.1

  com.apple.driver.AppleUSBHostMergeProperties 1.0.1

  com.apple.driver.AppleEFINVRAM 2.0

  com.apple.iokit.IOHIDFamily 2.0.0

  com.apple.driver.AppleEFIRuntime 2.0

  com.apple.iokit.IOSMBusFamily 1.1

  com Apple.Security.sandbox 300.0

  com.apple.kext.AppleMatch 1.0.0d1

  com.apple.driver.AppleKeyStore 2

  com.apple.driver.AppleMobileFileIntegrity 1.0.5

  com.apple.driver.AppleCredentialManager 1.0

  com.apple.driver.DiskImages 417.2

  com.apple.iokit.IOStorageFamily 2.1

  com.apple.iokit.IOReportFamily 31

  com.apple.driver.AppleFDEKeyStore 28.30

  com.apple.driver.AppleACPIPlatform 4.0

  com.apple.iokit.IOPCIFamily 2.9

  com.apple.iokit.IOACPIFamily 1.4

  com.apple.kec.Libm 1

  com Apple.KEC.pthread 1

  com Apple.KEC.corecrypto 1.0

  Unable to gather system configuration information. Model: iMac14 2, 4 processors, Intel Core i7, 3.5 GHz, 24GO, BootROM IM142.0118.B12, MSC 2.15f7

  Graphics card: NVIDIA GeForce GTX 780 M, NVIDIA GeForce GTX 780 M, PCIe, 4096 MB

  Memory module: DIMM0/0 BANK, 4 GB DDR3, 1600 MHz, 0x80AD, 0x484D54343531533641465238412D50422020

  Memory module: DIMM0/1 BANK, 4 GB DDR3, 1600 MHz, 0x80AD, 0x484D54343531533641465238412D50422020

  Memory module: BANK 0/DIMM1, 8 GB, DDR3, 1600 MHz, 0x859B, 0x435438473353313630424D2E4D3136464544

  Memory module: BANK 1/DIMM1, 8 GB, DDR3, 1600 MHz, 0x859B, 0x435438473353313630424D2E4D3136464544

  Airport: spairport_wireless_card_type_airport_extreme (0x14E4, 0 x 111), Broadcom BCM43xx 1.0 (7.21.94.136.1a1)

  Bluetooth: Version 4.4.3f4 16616, 3 services, 27 aircraft, 1 incoming serial ports

  Network service: Wi - Fi, AirPort, en1

  Serial ATA Device: APPLE HDD, 1 TB ST1000DM003

  USB device: USB 3.0 Bus

  USB device: Elements 107C

  USB device: Backup + Office

  USB device: Hub BRCM20702

  USB Device: USB Bluetooth host controller

  USB device: FaceTime HD camera (built-in)

  USB device: Keyboard Hub

  USB Device: Apple keyboard

  USB device: USB 2.0 Hub [MTT]

  USB drive: Microsoft Wireless Optical mouse¬ae 1.00

  USB device: External USB 3.0

  USB device: External USB 3.0

  USB device: My passport 0820

  USB device: My passport 0748

  USB device: FA GoFlex Desk

  Bus crush: iMac, Apple Inc., 23.10

  Please post the rest of the etrecheck report.

• Compatibility problem of motherboard with the new GPU [h8-1214]

  I tried to upgrade my GPU [gtx 560] to a [ti gtx 780] and it seems that when I install my end card higher than my computer [h-8 1214] won't go past the splash screen.

  My OS is windows 7 64 bit.

  I already did to try to fix things:

  -Power supply is adequate and bronze certified (750w)

  -Update my BIOS

  -try a different card (gtx 770) video

  At this point I am sure that it is the motherboard having problems, I would like to know if there is a work around or should I just get a new motherboard.

  Sianmors, welcome to the forum.

  You are right.  It's a motherboard problem.  Your new video card requires the UEFI Firmware in the motherboard, instead of the standard BIOS.  HP didn't start using UEFI until mid-October 2012.

  I suggest that you contact the maufacturer Technical Support to see if they have a VBIOS update that will work with your computer.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• SEVERAL problems with the new X 34

  So, I have been active during the overclock.net forums concerning the many problems I am having with my X 34.

  Long story short, I'm back this thing to Newegg and waiting for another delivery. But I thought I'd come at least here because it has high liklihood to return to anyone who cares to Acer. I called their tech support to let them know about the issues, but when the old Indian robot for 2 years at the other end kept referring to as resolution of refresh rate, I decided that I couldn't take more.

  So I took delivery of the monitor yesterday and he initially worked well... but the longer he stayed, the more problems, he has developed.

  My system is one I built a year or two ago and works perfectly with my Dell 3008WFP. Video card is a brand new MSI 980 Ti Lightning. Operating system is Windows 10 x 64. Is a Corsair 750W POWER supply. 16 GB of DDR3 RAM.

  I even made a COMPLETELY new install of Windows 10 on this computer to try to resolve these problems. Did not work. I have disconnected/reconnected everything inside my computer, including RAM and GPU. Did not work.

  And Yes, G-sync is enabled in the NVCP. And Yes, I manually set the refresh rate in the NVCP in correlation with the manual settings on the monitor.

  Problem no. 1: Menu recording does not settings

  -Don't know what the problem is here. But for about 3 hours last night, my monitor would not save settings for serger refresh rate. I would go on the menu... allow the serger... Set it to 100 Hz... Select "Apply and restart. Then (here's the interesting thing I think in hindsight), the screen would flash many colors several times and restart. I assumed that flashing color was normal... but it was never the Predator Logo when it has been reset. The office is finally pointing upwards and I could choose 100 Hz in my NVCP... but when you returned from the settings menu, Overclock was Off back with the default refresh rate. I have nothing would fix it with the reset of the monitor and unplug. Later... I have unplugeed the monitor for 30 minutes and when I plugged it back in, it would save my overclock settings now. It is interesting, but now, when I selected "Apply and reset", he would show the Predator logo when restarting... this logo did not appear before.

  Problem #2: Flashing screen

  -See a video of this question HERE

  -This developed before my eyes. After the initial installation of the monitor, it worked fine. Without no flicker, no problems. But as I was sitting at the dinner table last night, I started to see the monitor flashing intermittently in the other room. I look at the screen, he flickered about 4 or 5 times per minute. For the next hour, he progressed to 30 - 40 times per minute. And subsequently developed in constant blinking. BUT this flicker only happens when I go to the Office at 100 Hz. It happens sometimes in games, but not constant.

  I first thought that I had a bad cable of DP since I used one from Amazon, if I swapped it for the Acer cable included. Nope... same problem. I even inserted my previous EVGA 780 TI... but the flicker that happens too.

  Then, I thought it was a driver problem, I did a clean install of the nVdiia previous drivers. Nope. Then a cleaning installed latest drivers from nVidia WHQL. Nope.

  Then I saw here that you can download the drivers for the monitor directly from Acer. So, I did a guy like an unsigned driver installation. Nope.

  After all this, the problem persists.

  Strange thing about this one is that there was when I first got the monitor but got progressively worse since I got it.

  Another weird thing is that if I have a window open, then it isn't twinkle... reduce the window, and he comes back. It's actually what made me think, it was a driver issue, but as you can see above, I think that I have ruled that that fully.

  Also, if I set my refresh rate to 95Hz or below, the problem occurs. (This is actually how I currently work).

  -UPDATE: the issue has actually started just after executing i1Profiler to calibrate the screen several times back to back. I can't imagine how, but could the rapid exchange of multiple colors full screen damaged electronics somehow? Or is it just a weird coincidence?

  -UPDATED #2: it was suggested that ADC can cause the problem as it caused problems with the previous Acer monitors. So I completely deleted i1Profiler and reset my default .icc profile. I also think that I figured out how to do a monitor factory reset - if you hold the buttons first and fifth, restarting the screen and all the default settings. in any case, does too and the blinking persists...

  #3 problem: Backlight horrible bleeding

  I have to type anything here? Leave some pictures to speak for themselves...

  

  

  Trouble #4: Parts of the screen does not not on

  It has been described elsewhere, so I won't detail it here. But yes, I have the same problem. Here is a representative of my monitor picture when the issue arose.

  

  Overall, I am extremely disappointed, although I can't say I'm surprised. I mean, we deal with Acer here guys... Not exactly known for the high-end products. You can put the red lipstick on a pig...

  So is there more any idea or suggestion out there?

  Until then... I'll wait for my new X 34 excerpt here from Newegg to see if I won the lottery of Acer he...

  I created this post to be a "accepted solution" to this thread with the purpose to help other users who need to find the answers. This should help to find this information faster than to have to go almost 800 posts to find pieces of information.

  Wake up from sleep (backlight) - initial response and follow-up

  Problems with Overclocking at 100 hz - original response

  Coil - Whine Original response

  Color banding - users in Australia reported the problem. The teams in the region to THE have been notified and a firmware is available.

  -Scanning lines Original response

  Thank you
  Cory

• New PNY Geforce GTX 780 does not leave my PC boot?

  Alrighty! So this is the second time around I upgraded my PC. My base model was a Pavilion p7 - 1127c (Canadian English). Before recently, I was running on a gtx 570 and a new diet to wear. Everything worked perfectly without any problems, and I decided to upgrade again. This time I pushed my RAM up to 16 gigs, got a new power supply 700W and the above gtx 780.

  However, I became frustrated, since, while the gtx is in my computer, I can't start after the HP splash screen, and I have the function keys, it brings me to the POST screen tell me about my features of the computer.  Sometimes lower right, it will add text telling me what I COULD have opened if the computer was not listening on. For example, if I hold f10 I think, it will say "boot menu" in the background, but nothing else changes and no windows open upward.

  I tried reseting the CMOS to remove the battery, flipping the switch, unplug, hold down the power button for 20 seconds, all in different combinations.

  I tried to take out the HARD drive and commissioning, without change.

  I tried to Exchange around the RAM and booting with only 1 location used and others.

  I tried to uninstall the graphics drivers and THEN start with the set 780.

  I tried updating my BIOS to the latest version with the HP site provides me with.

  I don't know what more can be done, and without the 780, all new parts that I got are completely meaningless.

  I don't need a psu of 700W to run a 570.

  (I also want to point out that the computer works perfectly again once the 780 is not installed).

  The 780 stills lights upward when it is powered.

  I'd appreciate any help I can get! Thank you

  POWER SUPPLY:

  http://www.Newegg.ca/product/product.aspx?item=N82E16817139046

  GPU:

  http://www.Newegg.ca/product/product.aspx?item=N82E16814133489

  RAM:

  http://www.Newegg.ca/product/product.aspx?item=N82E16820233299

  Hello

  So why do I feel that this thead element is a "red herring"?

• Audio problems after transfer/download site asocoal Kaneva. It worked until the updates have been made? Internet problems now, explore the problems of transfer and data security?

  I was downloading my own music on a social site to Kaneva. They played very well until he had made a few updates. Problems with Internet explore every time I try to play the new songs just downloaded and you hear nothing. The old songs put forward the downloads continue to play very well. I have re downloaded and verified properties of each song, too, was done in the same way! What is a transfer or data of Internet Explorer security problem? The songs play fine on my computer, but will not play when downloading on Kaneva. This happened after a few updates have been allowed on my computer? What is DEP? Please help, we have meetings on Kaneva and this must be resolved.  Thank you!

  Hello

  I suggest you visit the link, below, that might help you.

  http://forums.Kaneva.com/archive/index.php/t-780.html

• Problem setting up printer on XP via WAN for 64 bit Vista machine. __

  I have a desktop computer XP with a HP Laserjet P1006 and a Canon MP 780 multifn connected by usb printers ink jet.

  I have a vista 64 laptop I set to print on both printers via WAN (to aid adding printers and worked without any problems).

  I recently moved and when I brought back online network, the HP printer works well, but I can't print in the Canon.

  I uninstalled the Canon software and reinstalled. I connected Canon printer to Vista computer in local mode and it prints fine.

  When I try to configure Canon printer in network mode, I click on "Add a printer" on the Vista computer, I am able to 'see' the Canon printer on my desktop and "select." I get the message: "the server for Canon printer does not have the printer driver installed" and request the INF file for the printer, vista computer can not find the Canon for disc or download the driver for Canon printer (64-bit version of Vista).

  It seems to me that if I can print in local mode on Vista computer, that the correct drivers need to be installed, and because I can print on the HP printer on the Wan that the network configuration is correct, I so need to understand what the origin of the problem.

  Hi quilter48,

  In Vista computer, change the following settings and check if it helps:

  on the computer that is running a 64-bit version of Windows, click Start, point to settings and then click Printers and faxes.

  b. double-click Add printer.

  c. click Next.

  d. click local printer, clear automatically detect it and install the checkbox and then click Next.

  e. click on create a new port and then click Local Port next to Type of Port.

  f. in the Port name dialog box, type the path of the printer by using the following syntax:

  \\Computer name\printer name

  g. click Next.

  h. on the page to install the printer software, click the appropriate manufacturer column manufacturer, click on the name of a printer that supports the same printer as your printer emulation, click Next and then click Finish.

  You can see the following article for more information:

  How to find a printer driver compatible to a computer that is running a 64-bit version of Windows

  http://support.Microsoft.com/kb/895612

  Also check out the following link:

  Network printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• OptiPlex 780 A15 Bios error 2 and 4

  It seems that every Dell Optiplex 780, version minitower, 0C27VV motherboard that I saw that was updated BIOS version A15 poster code error 2 front and 4 on reboot.  They do, however, start ok to power.  Why isn't it posted anywhere?  What is the solution?  How the BIOS can be reversed to say, A12.  Otherwise, this is a great computer, just make sure you do not update the BIOS A15.

  Dale al.

  [Admin note: personal information]

  My apologies, RoHe, that's what you're missing.  The monitor is connected to the computer via a KVM Linkskey switch.  When the monitor is connected directly to the computer, the problem disappears.  Thank you for your time.

• R61: MATCH (ITA) A DVD/CDRW UJDA 780 pilot has exclamation mark highlighted in yellow, why?

  My dvd rom is not displayed in the Panel of the computer and my burner does not show in my music software. I went to control panel > system > device to reinstall Manager, difficulty pilots and seen the MATCH (ITA) DVD/CDRW UJDA 780 pilot has exclamation mark highlighted in yellow, why?

  I have a Thinkpad R61 / model 7735 W19 and on Windows XP 2003, service pack 3, IE 7

  This could be the problem with some active cartesmemoires program or game. Search using google search. "dvd upper filter.

  I had the same problem when I installed a CAD software that has a few copyprotect his driver installed "rootkit" on dvd. When I took it out superior dvd of registry windows worked fine all after that.

• Need video driver Windows 8.1 Overview for Dell Optiplex 780

  Hello

  I installed windows copy 9431 build Preview Pro Windows 8.1 evaluation (64-bit). I tried all video drivers http://www.dell.com/support/drivers/us/en/04/Product/optiplex-780 for Windows 7 64-bit.

  But no driver is compatible with my windows. Single driver installed successfully named "VideoOPGA6_XP_A00_setup - R3M7Y_ZPE.exe", but does not properly. Can U please give me the link of good pilot?

  Problem is only with the video driver.

  My whole PC details:

  Processor: Intel Core 2 Duo E8400 @ 3 GHz 2.99 .00GHz

  Hadrdrive: 640 GB Seagate

  RAM: 12 GB (4 GB x 3) DDR3

  I am waiting for your kind reply.

  Best regards

  Danish Muhammad

  Hi Muhammad Danish,

  Windows 8 compatible drivers for OptiPlex 780 are not available on the Dell support Web site.

  Have you tried to check for drivers on the video card manufacturer's website? Based on the file name of drivers you mentioned, I think that your computer is the AMD Radeon HD 3470 graphics card.

  Try to install more software Catalyst from the following link: http://dell.to/16zWqy5

  Do not answer with the results.

• Windows 7 blue screen problem

  Signature of the problem:
  Problem event name: BlueScreen
  OS version: 6.1.7601.2.1.0.768.3
  Locale ID: 1033

  More information about the problem:
  BCCode: 116
  BCP1: FFFFFA8006D621D0
  BCP2: FFFFF88002C2280C
  BCP3: 0000000000000000
  BCP4: 0000000000000002
  OS version: 6_1_7601
  Service Pack: 1_0
  Product: 768_1

  Files helping to describe the problem:
  C:\Windows\Minidump\091616-42011-01.dmp

  Update driver Audio IDT high-definition (HD) version 6.10.6381:

  http://ftp.HP.com/pub/SoftPaq/sp58001-58500/sp58131.exe

  *******************************************************************************

  *                                                                             *

  * Bugcheck analysis *.

  *                                                                             *

  *******************************************************************************

  Use! analyze - v to obtain detailed debugging information.

  Error checking 116, {fffffa800ae43420, fffff8800405780c, 0, 2}

  Cannot load the image \SystemRoot\system32\DRIVERS\atikmpag.sys, 0n2 error Win32

  WARNING: Unable to verify timestamp for atikmpag.sys

  ERROR: Module load completed but symbols can be loaded for atikmpag.sys

  WARNING: Unable to verify timestamp for win32k.sys

  ERROR: Module load completed but symbols can be loaded for win32k.sys

  Probably caused by: atikmpag.sys (atikmpag + c. 780)

  Update the graphics driver AMD HD 6480 G version 16.2.1:

  https://www2.ATI.com/drivers/Beta/non-WHQL-64bit-nieg-Radeon-Crimson-16.2.1-win10-WIN8.1-Win7-feb27.exe

  Please remove Advanced SystemCare. Select the hotkey Windows key + R, type Appwiz.cpl and press ENTER . Place the cursor on Advanced SystemCare, right-click and select Uninstall from the menu drop down. Restart your computer.