P1102w: P1102w is no longer connects to the wireless network

Similar Questions

• Older Acer laptop is no longer connects to the wireless network.

  I have an older Acer, an Aspire 4520 laptop.  When my ISP (Qwest) replace my router and the modem with a modem/router all-in-one (Westell 7500), the laptop was the one computer in the network which was not able to connect.  He does not reject the password (if I type in the right), but tells me my connection attempt has timed out.  I typed the password wrong once to see what would happen and he told me that the password has no agreement with that of the router.  In any case, I connected the computer to the internet, then tried the fix to http://support.microsoft.com/kb/928233running, but that did not work.  I looked my material and saw that the Atheros AR5007EG Wireless Network Adapter and the NVIDIA nForce Networking Controller were working properly.  I did not cheat with the dissemination in the registry setting, because I don't really know where to find it or what to take if I did.  In addition, the computer logs on other networks without wire (at McDonalds).  Any ideas out there?
  Keith

  Hello

  Follow the steps mentioned below and check if that helps.
  Method 1: temporarily disable the Antivirus and firewall and check out them.
  Disable the anti-virus software
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
  http://Windows.Microsoft.com/en-us/Windows-Vista/firewall-frequently-asked-questions
  WARNING: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
   
   
  Method 2: Follow this link and check if that helps.
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows?T1=Tab03
  Identify and resolve home network problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/identify-and-resolve-home-network-problems
   
  Method 3: Reset TCP/IP (Transfer Control Protocol / Internet Protocol) settings
  TCP/IP can sometimes become damaged or altered.
  How to reset the Protocol Internet (TCP/IP)
  http://support.Microsoft.com/kb/299357
  
  Reference: Troubleshooting network connection problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems
   
   

• Windows 7 taking a long time to connect to the wireless network

  When I try to connect to the wireless network, it takes about a minute or two.  I didn't have this problem until I updated my card wireless about a week ago.

  Thank you very much.  I think I solved the problem.  I didn't have this problem until I updated my card with the latest wireless.  But I uninstalled the new and re-installed version, and that seemed to solve the problem.

• Connection to the wireless network printer

  My power went market last night and now my Deskjet 3050 a is no longer connected to my wireless network.  How to reconnect?  I don't have a usb cable to connect the computer to the printer.  It's the first time that this has happened - I've had this printer for over 2 years now.

  OK, I pulled down the manual and you do not have an installation wizard, sorry. You will need to use a USB cable from the printer and follow the instructions on page 32 of the User Guide to get back attached to your router.

• HP envy laptop laptop 15-ah150na: loses the connection to the wireless network device I had not only portable for 2 days

  Loses the connection to the wireless network sometimes directly after that the computer is turned on at other times after 5 min and sometimes after an hour.  No other device I have loses the connection to the wireless network.  Help, please.

  Hello @fairgame,

  Thank you for visiting the Forums from the HP Support! The forums are a great place where you can find solutions for your problems, with the help of the community!

  I understand that you have a problem with the WiFi and wanted to help you!

  First of all, try to review the next steps, offered by community member @Great-Christine-Tree:

  First of all, we have a step by step guide to guide you through the process of diagnosis here:

  HP PC - troubleshooting Internet and wireless network

  A second option is to try the following steps:
  Powercycle the network:
  1. turn off your laptop.
  2. unplug the power to your router.
  3. disconnect the power to your modem.
  4. wait at least 45 seconds.
  5 reconnect the modem and wait for it to come back online.
  6 plug in the router and wait for it to come back online.
  7. turn on your laptop and test your connection.

  Turn off the power to the adapter:
  1. open Device Manager. (Win Key + R > type devmgmt.msc > OK)
  2. expand the network adapters.
  3. right click on the Ethernet adapter / wireless, and then click Properties.
  4. click on the power management tab.
  5 remove the check mark next to allow the computer to turn off this device to save power.
  6. click on OK.
  7 test cycle.

  Reset the TCP/IP settings on your PC:
  1. go to your start screen/menu and type CMD.
  2. right-click on the command prompt icon and select run as administrator.
  3. in the window that opens type "netsh int ip reset resetlog.txt" without the quotes and press ENTER.
  4 restart your PC and test.

  It can also help to reset the winsock catalog:
  1. go to your start screen/menu and type CMD.
  2. right-click on the command prompt icon and select run as administrator.
  3. in the window that opens type "netsh winsock reset" without the quotes, and then press ENTER.
  4 restart your PC and test.

  Reinstall the NIC drivers:
  1. download the drivers from here , but do not run them again.
  2. go to your Start menu/screen and type Device Manager.
  3. expand network adapters.
  4. right click on the wireless adapter and choose uninstall.
  5 install the drivers downloaded in step 1.
  6. restart your PC and test.

  Test an ethernet connection:
  Explicit. Test if the problem persists on a wired connection to the adapter hardware troubleshooting wireless can be directed to the appropriate areas.

  Test another connection:
  Many people excluded their home network as a problem if another device working on the same network. Networking is not as simple as that. Each device interacts differently with your router or modem and it is impossible to exclude the settings for this device until the laptop has been tested on another network.

  If these steps do not resolve the problem, try this document published by Microsoft for network management issues: wired and wireless network problems. You can change the operating system with the drop-down list in the upper right of the document.

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution', this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great day!

• Unable to connect to the wireless network, error message "Windows could not finish repairing the problem because it is impossible to perform the following action. Renewal of your IP address.

  Original title: Unable to connect to the wireless network

  Unable to connect to the network wireless Toshiba Satellite A105 PC running Windows 7.  "Windows could not finish repairing the problem because it is impossible to perform the following action. Renewal of your IP address.  Works with Windows XP SP2, IE 8.00.6001.18702 file, I think that Version 3.  It has been installed on a disk provided by Microsoft after that old installation became corrupt (in the sense of Microsoft technical support.)  Before that, wireless network worked well.   (So unable to connect to the Internet for updates.)   Have tried to change the other settings and different messages acquired when it SHOWS that I am connected but cannot connect because of something to do with the certificate.  I don't remember what I did to try to solve this problem in the last days.

  I should add that I have tried the solutions of the previous forum on this topic, and none worked.

  Hi Marilynnla,

  Sorry to hear about the bad experience you encounter. Lets see if the network problem can somehow be archived.

  Read this article and follow the steps. Lets see if it helps in any way.

  How to troubleshoot wireless network connections in Windows XP Service Pack 2 (Works for Windows XP SP3 as well)

• I've updated windows and now my computer does not connect to the wireless network.

  I've updated windows security updates and now my computer does not connect to the wireless network.  Until then, it worked very well and even now it will connect through wired connection but not wireless.

  Hello
   
  You can follow below link that can help you to solve your problem:
  How to troubleshoot wireless network connections in Windows XP Service Pack 2
  http://support.Microsoft.com/kb/870702

• Impossible to connect to the wireless network when the wireless Internet is filled to connect to the Local network

  I tried to fill the connection between my laptop Wi - Fi and an ethernet cable LAN via the connection to the Local network for my xbox 360. However, when the connections passed the wireless connection would show that it is disconnected and would not reconnect. When I tried to repeat the process sometimes the same thing happens sometimes it says that it is still connected.

  However, be that as it may, both times I could not load any page of the website from my laptop and xbox connect any.
  How can I create a network bridge and get the wireless internet to connect please?

  Any help to fix this would be appreciated,
  P

  This Microsoft Knowledge Base article might help: bridge may not work with a Non-Promiscuous Mode network card .

  If not, I recommend to delete the network bridge and enable sharing of Internet connection on the wireless network connection. Boulder computer Maven
  Most Microsoft Valuable Professional

• Wireless network adapter cannot connect to the wireless network

  When I start my PC HP TouchSmart it does not recognize my wireless network.  It says wireless network adapter cannot connect to the wireless network and the details said network adapter "Local network connection * 16 ' does not work properly. The strange thing is that if I leave my computer for a few minutes, then restart it twice, it recognizes the network and starts working. Frustrating is that I have to do this everytime I turn on my computer.  It takes at least 10 minutes of starting and restarting my computer before it will recognize my wireless network.   Any help?

  Go to the website of the manufacturer of your router > make sure you have the latest Firmware in Vista for it.

  Go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > look for it last network adapters Vista drivers > download/install the.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-adapter-problems

  Troubleshoot network adapter problems to Microsoft link above.

  Try without commitment TCP/IPv6:

  If you still have internet connection probs, one thing to try is the separation of the TCP/IPv6 (which is done by going to network connection > right click > properties > it uncheck > OK.)

  http://digitalmediaphile.WordPress.com/IPv6-how-to-unbind-from-a-NIC-in-Windows-Vista/

  See you soon.

  Mick Murphy - Microsoft partner

• PC cannot connect to the wireless network

  Windows Vista and office computer HP.  The use of the Airport Extreme.

  All other computers in the House can connect to the wireless network.

  The Vista machine declined the connection Wireless intermittently for the past two weeks.  Tonight, he lost it completely.  When I click on "connect to network" in the network control panel - I see the wireless network.  But when I click on connect, I get a message that Windows cannot connect to this network.

  I changed the password on the Airport Extreme and rebooted, it.  Wireless usb on Windows machine the device works correctly, by checking through the properties box.

  For example, Vista machine is recognizing the wireless network, but does not connect. Why not?

  I'm ready to throw the computer out the window!

  Hello

  Check the PoodlesAway solution to the same issue here:

  http://social.answers.Microsoft.com/forums/fi-fi/vistanetworking/thread/d4fa044e-8C41-4D8D-a4b1-82ee9ff556ac

  ======================================

  Apple Airport may be your main problem - did you check its firmware?

  Read these
  http://osxdaily.com/2009/09/01/how-i-fixed-my-dropping-wireless-airport-connection-problem-in-Snow-Leopard/

  http://reviews.CNET.com/8301-13727_7-10331876-263.html

  ======================================

  Actually try updating your driver and disabling the network logon.

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
  updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ------------------------------------------------------

  Make sure you know the details of connection to your wireless router - SSID and password.

  You lose connection when you do and have to redo your logon.

  Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
  lower left click on merge or delete network locations - REMOVE all instances of your network (and the
  others you don't use anymore) - REBOOT. Start - Connect To log on to the network.

  -----------------------------------------------------

  Check this box:

  Strange problem with Internet under Vista
  http://www.catonett.com/blog/archives/194

  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
  http://support.Microsoft.com/kb/928233/en-us

  ----------------------------------------------------

  And:

  Network connection problems
  http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• B110A connects to the wireless network but no PC connection

  Hi Forum,

  I just bought a new HP Photosmart B110A printer range. I got set up with my Belkin wireless router. It is successfully connected. I could set up printing webservice as well. The printer is offline and I could also print a document by sending an email to the email address for the printer configuration. This means that the printer is connected to the wireless network and the internet.

  However, I can not connect to this printer from my PC connected to the same wireless netwrok. When I open the HP Solution Center, it displays the message "disconnected wireless.

  When I connect the printer via USB cable, I am able to connect to the PC and impressions as well fire.

  Can anyone help please?

  Kind regards

  Amol

  Download and run this utility: http://h20180.www2.hp.com/apps/Nav?h_pagetype=s-926&h_lang=en&h_client=s-h-e17-1&h_keyword=dg-NDU&jumpid=ex_r4155/en/hho/ipg/forum/network_diag/

  What did he say?

• Problem of not seeing list drop-down connection to the wireless network when checking connections network - pc windows 7.

  Problem of not seeing list drop-down connection to the wireless network when checking connections network - pc windows 7.

  I just installed a Belkin modem-router - which went well. Can I connect WiFi gadgets etc. I can also connect to the internet via a network cable to my pc. I also installed a belkin usb wireless adapter and in Device Manager, says it is enabled and works.

  My problem is, I have no way of choice get a WiFi PC to display in the list (from the notification area) and cannot get the pc to give me options to create a wi - fi connection. The more I get to try to do that is "unexpected error"!

  If someone could help on this - I would be very grateful

  Good news - update of my ongoing saga with this Belkin modem/router.

  Got the pc to see wi - fi now. It turned out to be the Zone Alarm! As the router has a firewall, I uninstalled Zone Alarm completely. Also, I went into the properties of belkin usb and checked it was the most recent drivers, it does not so I installed them.

  So far so good

  Thanks for the help

  TREV Smith

• How can I disable 'O2 connection manager' to automatically connect to the wireless network?

  Original title: I have a program installed in my computer 'O2 connection manager' it automatically connects to the wireless network, I need to disable the connection

  I have a program installed in my computer 'O2 connection manager' it automatically connects to the wireless network, I need to disable the connection to the network.

  Hi John,

  I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.

  If you do not O2 connection manager, you can disable it to connect to the Internet or you can uninstall the program and check the issue.

  You can follow the steps in the link below.

  Uninstall or change a program:
  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  I would say O2 you back for more information in the links below:

  http://www.O2.co.UK/business/support

  http://community.o2online.IE/

  I hope that the information above helps you.

• Comouter is no longer automatically connects to the wireless network.

  Until recent netbook Hannsbook my wife automatically connected to our wireless network when turned on.  We recently took a trip and used a different wireless network.  Back home, he is no longer automatically connect when turned on.  Software Troubleshooting in the Windows 7 Home Premium says he has been "manually disconnected' and it restores the connection.  I deleted all the other networks wireless to the computer.  Page manage wireless networks correctly identifies the network and says it should connect automatically.  BUT IT'S NOT!

  Once connected, the router works fine.  The connection is NOT lost when the computer goes into power saving mode. How do we get to resume its old custom to connect automatically when the computer is powered?  My wife is a technophobe and have to mess around to make the connection can be the drop of water!

  Hi Stuart,

  Do you have an error message when you try to connect to wireless networks?

  Perform the steps suggested by don241 from the link below and see if it helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/wireless-network-will-not-connect-automatically-on/4b34d624-81f6-4972-a34a-a74fd1825dd8

  Answer please if you have any questions.

• Pavilion p6-2310: can no longer connect to our wireless network

  All of a sudden our PC no longer has a connection to our wireless network.  We looked at the list of installed programs and it shows Ralink RT539OR 802.11bgn Wi - Fi adapter has having been installed today - but we have no install anything today.  Is it a coincidence that shows like this and all of a sudden we can access our wireless network?  How do we get working again that it is necessary as soon as possible?  Thanks for any help.

  Thank you.  I'm like a dog with a bone when it comes to these things and not rest until I get solved.  So, I found something in the knowledge base of the forum who pointed me in the right direction.  Using Device Manager we uninstalled and reinstalled the card wifi, and bingo, it works again.  Ceases to amaze me, but how a computer works fine 1 minute and then the next time that you are never going to use it, boom, something does not work.  And you did nothing to change anything so that it does not work.