P1102w printer's address

Similar Questions

• P1102w printer: have new router and can not figure out how to print wireless at P1102w printer - he sees old router

  I installed a new router (Netgear R6220) and cannot figure out how to get the P1102w printer to recognize the new router. It shows the former name of the router (Belkin.833) on the test page and displays the IP address configured by AutoIP rather than DHCP as the old router does. The computer is a desktop Dell Dimenstion about 3 years and use Windows 7. The router connects to the computer to the Internet.

  Help - How to make the printer recognize and communicate with the new router? (The original installation instructions don't seem to work for me.)

  I made an update of the firmware a few months ago and the currtent datecode is 20130703. Allowed to print from my Samsung S2 Tablet through the router.

  Here's what finally worked.

  1 had to withdraw from old installation CD but Uninstall selected, so I completely shut down the computer. Guy at Best Buy said to "remove the device" but it was not enough.

  2. download install the latest software from the HP download site and ran it. (http://ftp.hp.com/pub/softlib/software13/COL32431/bi-80329-11/hp_LJP1100_P1560_P1600_Full_Solution-v20120831-50157036_SMO.exe)

  3 downloaded another file and ran it. (Setup_IP4, [192_168_1_5], [NPI073E2D] _it) Not sure where I found this one, but the software prompted me to run.

  Finally, everything works and all devices are wireless printing

• Paper jam false error HP LaserJet Pro P1102w printer

  Hi my HP LaserJet Pro P1102w printer will not print envelopes and labels. I can print documents in the usual way. I can print on the plateau of encelope, but I can't use Word 2003 to print an address.  When I check "what is the impression he's a doc of the envelope and he says Envoy."  The 'Attention' on the printer flashes.  Troubleshooting says it's a problem with the printer.  I ran the auditor of problem of HP and the message I get, is that the problrm is a paper jam. There is no paper jam!

  I would be grateful for any help

  Thank you

  Ron Barker

  Hi @RonBarker ,

  I see that you have problems printing of envelopes. I will definitely do my best to help you.

  The Word software, to change the auto power.

  When the light is flashing on the printer, if you open and close the cover, the printer should resume printing, it acts like a resume button. Given that this model does not have the button. But I've provided the steps to make the changes via the Word software.

  In Word, click on tools, select letters and direct mail/envelopes and labels, box of the envelope will be opened in the envelope tab, enter your address, click Options, click the Printing Options tab, you will need to change the autopower supply, it is probably set to manual. Check the food method to ensure that it is correctly set.

  

  If you need help, let me know.

  Have a great day!
  Thank you.

• P1102w printer is not "readable by this computer.

  Hello

  I used my laserjet P1102w printer with my macbook pro for about two years, using a USB connection.

  I've never had real problems with the printer and it was working fine with my macbook last Thursday night. I tried to print something on Sunday night but when I plug the printer by USB my computer flashes just a window that says "the disk you inserted was not readable by this computer." He refuses to print all documents and does not appear on the computer at all. I tried to reset all settings for printing on the laptop, but the printer does not always appear. I use Mac OS 10.9.5. I had not brought no changes to software over the weekend I would have thought this would cause.

  I am a student and really need my printer working again as soon as possible. Can someone help me with this problem? I can't think what else to do.

  Thank you, Stephen.

  Hi @SJRamsay11,.

  I see by your post when you connect the USB cable to the Mac you get the message "the disk you inserted is not readable by this computer. I can help you with this.

  Something on the Mac is to recognize the printer such as a hard drive. Because the printer has a feature called Smart Install, which installs only the printing automatically on Windows software.

  Try unplugging everything, make a full stop down on the printer, restart the Mac, and then connect the USB to a Mac, while the printer is still off, then start the printer.

  You have Parallels installed on the Mac?

  Temporarily disable Parallels, for the Smart Install is recognized on the Mac.

  If you do not have Parallels, then we will need to turn off Smart Install to install the printer on the Mac.

  There are two ways that we can disable it.

  Print a configuration page. Printing a Configuration Page.
  Select the method two.

  If the printer has a IPV4 address or the Direct wireless is under tension and indicating an IP address, you can access: the printer Web server integrated and disable the Smart Install from there.

  If you have a valid IP address, type the IP address in the Safari browser to bring up the printer built-in Web server and you can disable the Smart installed on the printer.

  If it does not, you will need to disable the Smart Install the printer on a Windows computer.

  On the Windows computer, go to start, computer, right click the printer CD
  and left click Open in a new window, go to Smart Install utility util/siutility.exe/HP.
  printer or PC - printer select / click on disable.

  Let me know how make you out.

  Good day!
  Thank you.

• T.B. 38.2... How to print the address book

  How can I print my address book in TB 38.2; running Win 7-32

  "Address book" - choose a book - in address book menu "file - print address book.

  TB 38.2 Win10-PC

• With the help of my iPad, can I print an address on an envelope #10?

  KB/PH/18153 you want to print an address on a standard envelope 'size '. This seems to be the A4. But I want to print an address on an envelope smaller: #10. Can I do this?

  I'm not 100% sure what is your question.

  You want to print from iOS Pages on an iPad? You have an AirPrint printer?

  "An A4 envelope is essentially 4"x 6", while a #10 is 4" x 9.25 ".

  Can clarify you?

• WPA2 and p1102w printer

  I did research on the p1102w printer and attempt to verify wireless security protocols support.  The Group of HP cat unplugged my session without answering why question so I hope that someone here will be able answer my question.  The p1102w does support wpa and wpa2?  If Yes, is it established anywhere?  Thank you

  Hello

  In my view, it will support WPA and WPA2 - see Page 74 of the manual of technical reference on the link below.

  http://h10032.www1.HP.com/CTG/manual/c01996606.PDF

  Kind regards

  DP - K

• LaserJet P1102w: Printer 'offline' since the upgrade to El Capitan on MacBook Air - using the USB cable connection to print

  Updated the MACBook Air to OS X 10.11.4 El Capitan.  In this process, my printer disappeared.  Apple support had to intervene to get the printer view and print - that was yesterday & took 1.5 hrs.  Today, I tried printing and get the error "offline."  I went through the steps of unplugging the printer and Router 2 x, but always 'offline' message.  Help please!

  Hey @mel1121,

  Welcome to the Forums of HP Support!

  I understand that you have some problems with your Mac OSX 10.11 for the Laserjet P1102w printer machine printing. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once done:

  1. On your Mac, click on your Apple icon, system preferences and printers and Scanners.
  2. Hold down the CTRL key and click the icon of your printer on the left.
  3. Click on reset printing system.
  4. Click on the button "+" in the lower left corner of the screen.
  5. Select your printer from the list.
  6. Click in the box next to and select your printer from the list.
  7. Click on Add.

  Please let me know the results after following the above. If you are able to print, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

   

• HP deskjet 2545: How can I get the hp printer email address 2545

  My hp chromebox does not recognize the new printer hp deskjet 2545. He keeps asking the printer email address, but as I followed the instructions, an email address is not provided. How can I still access my printer?

  Hello

  It is not an ePrint printer there so NO E-mail address:

  http://support.HP.com/in-en/document/c03811750

  Kind regards.

• my hp lazer jet p1102w printer resume printing via airprint when not available

  Hello

  I have the hp lazer jet p1102w printer. I've upgraded to the latest firmware.

  What is not available in the printer paper and I reload, it does not resume printing via airprint in my ipad.

  especially when I want to print on both sides. I can't resume printing. What should I do?

  Hello

  Once you have loaded paper in the tray, open and close the printer cover. who will resume the print job and complete it.

  Shlomi

• Unboxing and configure the HP LaserJet Pro P1102W printer

  Learn how to perform a unboxing conversion and configure the HP LaserJet Pro P1102W printer.

  For other helpful videos, go to hp.com/supportvideos or youtube.com/hpsupport. Several support options for your printer are available at hp.com support.

  This video was produced by HP.

  I hope you find this useful and informative video.

• HP p1102w: printing from Mac OS 10.10to hp p1102w wireless

  Wireless printing failed. When I go through the process to put in place the enemy wireless with USB connection: when I click HTML configuration, I can't go any further, and an error message is displayed as follows: this page contains the following errors: error on line 6 in column 47: entity 'nbsp' not defined and the error on the column of the row 12 8 : opening and ending tag not correct: link to line 0 and head. Help. MY OS IS 10.10.3. And the printer is HP p1102w. REPEAT HELP

  Hi @Eoj25karfuno,

  I see that you have problems running the HTML configuration. I'd love to help you.

  Make sure that Safari is set as default browser. (sometimes the SAP will not open if it is not set by default)
  Open Safari, at the top, select the Safari menu, select Preferences, general, as a default value.

  Restore the settings of the default printer Wireless:
  1. turn off the product.
  2. hold the wireless button and the Cancel button and then turn on the product.
  3 press and hold the buttons until the printer stops making noise, then release the buttons.

  Print a Page of Configuration to ensure that IPv4 and SSID are deleted from the old settings.
  Print a Configuration Page.

  Remove the printer in printers and Scanners and add it again. You may need to click the P1102w in the drop-down menu, do not use the default driver.

  Here is a screenshot, it is a printer model different, but just to show you what it will look like.

  

  Follow this document to reconfigure the printer via the wireless network.
  Set up your printer for a wireless network for the HP LaserJet Pro P1102w printer.
  Under OS X v10.10 Yosemite, OS X v10.9 Mavericks and OS X Lion mountain v10.8 Select method three: using a USB wireless setup.

  If you are still having problems loading of HTML, update the firmware of the printer configuration Page.

  Unfortunately, there is not one available currently to 10.10, but if you have 10.9 or less or a Windows computer, you can update the firmware in this way.

  If you appreciate my efforts, please click on the button below the thumbs up.

  If you're still having problems, please let me know. Thank you.

• Can print the address book of a 8310 blackBerry smartphones?

  Is it possible to print the address book of a 8310, I backed up using the Desktop Manager.  It's in a .ipd file.  Is their anythin that will read a .ipd file?  Thank you

  Hi and welcome to the Forums!

  I've heard of some of them... do not remember the exact name... Amber something or other? You could try Googling to see if you can find anything.

  Good luck and let us know!

• Unable to connect my P1102w printer to my network wireless (using Mac OS 10.6)

  I have a home network wireless vanilla (D-Link to a cable modem) and a MacMini running OS 10.6.8. My Mac laptop and 4th. GEN iPad work seamlessly. But my attempt to long hours to connect my new HP P1102w network was totally frustrating, despite a careful study of the documentation pdf, device/self test the printer configuration sheet, sailing on this forum, I'm looking at a slew of videos YouTube/HP and following all sorts of directions.

  The only consolation is the printer works fine on USB connection.

  Here are a few questions I met and that stopped me in my tracks:

  Carefully following both instructions pdf and video operating instructions online to HP, I get by step 6 w / no problemn. but then I go to step 7, which says:

  "Under the Mode of Communication , Infrastructure -click, select your network SSID from the list of names of the network (SSID)" and then click on the button. ""

  Problem is that there is nothing in this window. What I see is a State of the Wireless: enable or disabled (according to choice). And even if I try to select enabled, happening right now for people with reduced mobility. Aside: I note that the printed instructions show a copyright date of 2011. It's ancient history in the world of the CPU.

  Other issues: the single IP address I can find for the printer is the IPv4 address, but it is only for direct printing Configuration. What is the IP I'm looking for?

  Address of the printer hardward, I suppose, is your MAC? Boy, I sure could use better use of language here.

  So, needless to say, I'm stuck. It seems that it takes THAT hard, but so far nothing that I could find on the HP support or forums seems to help. Thanks for any advice you can provide.

  PS. I wouldn't go back this printer because I am a lover of HP printer, two decade, but alas, I might have if I can't find a solution.

  John Northwest

  Dear Gemini02,

  Thanks a lot for your helpful answer. It seems very complete, and I'm happy to give it a status of resolved problem, although I have not yet tried.  The reason is, one day before receiving your message, I benefited from technical support from HP that came with the guarantee of my printer (Oh!) I would have called them first before going on the forums. Lesson learned) and they took me in hand.

  I quickly reached a support person surprisingly knowledgeable and helpful tech (work of the night in Manila, PI shift), and I quickly accepted allow access remotely to my Mac and printer. For much of the next hour she practically held my hand as she walked through a fairly complex set of steps (very similar to yours) and here!, the problem has been resolved. She later sent me the steps she helped me through, as follows:

  ADDITIONAL INFORMATION: WIRELESS PRINTER CONNECTION

• P1102w printer: PROBLEMS of SHARING of WIFI p1102w

  Hello

  My name is Murilo and my main language is not English, so sorry for any ortographic errors.

  My problem is with the part, I me am formatted my computer cause before the XP and now I've upgraded to Windows 7. I have install the printer with the correct wifi features and I can't share on another computer, I already try to install the hp software and with the installation disc. I already try also reset the printer in factory configurations and install again and nothing.

  I really need help to fix this problem, if anyone can help me I want to stay happy.

  Thank you and sorry for ortographic errors.

  Hi Muurilobf,

  Thanks for providing the screenshot. I see 2 registrations for the Laserjet P1102w in the screenshot. What happens when you try to select and continue? (I would choose the Laserjet P1102 at the bottom of the list)

  Please provide details, you were able to run the Add Printer Wizard and the IPv4 address and you were able to print, correct?

  If you can add the printer in this way, then I would be not concerned about adding the printer through the search option.

  Make sure that the Windows Firewall and Antivirus is temporarily disabled when you try to add the printer.

  Here is a document to enable the file and printer sharing.

  Thank you.