P6055d Office HP upgrade disk question of aid and recovery (Pavilion)

Similar Questions

• Question of rescue and recovery, and Client Security solution

  I have a thinkpad edge e220s for home use and I am trying to understand that these two thinkvantage tools will be of no use to me since I'm not on a corporate network or whatever it is (all marketing materials HE mentions admins etc.).

  Is the rescue and recovery just a backup solution with imaging of disk (as ghost)? I use a drobo for all my data storage, so I am not too concerned about backups as the drobo offers redundancy in the event of disk failure. The laptop has a SSD which doesn't have a lot of capacity if I don't want unnecessary tools that will have a lot of space. However if the rescue and recovery offers really useful features then I might consider its installation (and not using the backup feature). I could not make out what marketing materials meant by the solution of a single button for viruses and crashes.

  Second, the client security solution features other than Vault/Manager password on my model? I'm already using the beta version of the new (4) version of password manager which is autonomous and requires no client security solution. Again once the marketing material does not help a user at home like me understand very well.

  Any help will be appreciated!

  Based on your description I don't think rescue & recovery or Client Security Solution any value for you.

• Need advice - questions of m8100n and stop Pavilion

  Hi all!

  I need some technical advice, because I do not know what way to go now with my m8100n Pavilion.  He began to act up in March of this year and died in total.  Once troubleshooting with support online from HP, it was determined that my motherboard (Nettle2) is bad and that it has replaced.  As it was out of warranty, we decided that a new Office was a more cost-effective solution, so the m8100n has set aside for me to tinker with later.

  Two weeks ago, I had the nerve to replace the motherboard myself.  I'm handy with all other aspects of the inside of a PC, but the motherboard was the "last frontier" for me.  I found a MCP61PM-HM on eBay that was v2.20 (thinking that the original motherboard had been improved since the v1.08 which was in my m8100n), so I bought it.  Replace the motherboard, I discovered that I had bought a Nettle3, who would continue to work with my m8100n but would lose a PCI slot.  No biggie!  I replaced the Nettle3 and all connected together and voila!  The m8100n puts as it is supposed to and no closing fast and constant.  I am a camper happy, right?

  Here's my problem: I installed Windows Vista on the m8100n using the motherboard Nettle3 (Yes, I know about the need for the new motherboard tattoo the recovery discs to work, but I wanted to use this office as a backup/file server, so I was not terribly concerned about the recovery discs) and everything seems to work very well.  However, after leaving the unit top during the night or during the day while I am at work, I find that the unit has stopped.  The green light at the back of the Unit indicates that the power supply is always powered, so I don't think that is the question.  Just for fun, I installed PC Wizard 2009 and SpeedFan to measure the temperature inside the device, and it doesn't seem to be anything out of the ordinary.  I did the other night while I was watching TV and suddenly noticed that PC Wizard 2009 showed that Core 1 (which I suppose is one of the mainstays of my AMD Athlon 64 X 2 Dual Core 5600 processor) climbed about 25 ° C to 60 ° C and 70 ° C, then 80 c, and finally almost 90 c, while Core 2 showed a steady 15-25 ° C.  I shut down the system to avoid any damage, but now I think the unit is closing itself because the processor overheats.

  Is it possible that one of the mainstays in my Athlon is defective and it is originally the stops, or is there something else I could be dominant?  PC Wizard 2009 tensions seem to be well, and temperatures inside the case seem to happen as well.  I don't want to give up this PC, because it seems that it is something simple that I could be dominant and am thinking that I might be too close to the issue to see what is really bad, and I'm hoping to pull out of the collective wisdom in these forums.

  Thank you in advance for any advice or suggestions that you might be able to offer!

  NEW UPDATE:

  After sitting the PC side for some time over the holidays, I started to do research on the processor AMD Athlon X 2 5600 +, given that all the indications suggest a heat problem with Core 1, who was leading in the PC by stopping.  After researching this CPU Model (Brisbane), it seems that Brisbane processors have a known issue with faulty temperature sensors core, which was probably, leading to a temperature reading fake being reported and causing PC stops.  This would also explain why the radiator or the CPU were always warm to the touch just after a shutdown due to overheating occurred.  I ordered a replacement AMD Athlon X 2 5600 + (not my workhorse PC, so I didn't need to upgrade the processor) and one both installed the CPU, memory, video card, DVD-R/W and finally the hard and everything seems to work normally again.  I ran a few stress tests on the PC from one day to the next, and the max reported temperature was 45 c 42 on Core 1 and Core 2.  It seems that the issue of the arrest was related to the CPU after all!

  Thus, after the better part of a year on and off with the PC, DIY replace the original motherboard to solve the problems of power cycle that I had originally, and replacing the CPU to solve overheating and issues which occurred after replacing the motherboard seems to have given new life to Pavilion m8100n.  What will make an excellent secondary / media server PC and will compliment my Pavilion m9500t nicely.  Thanks for all your help!

• NB200 - 10G: Wlan allowing using questions Win 7 and recovery

  Hello!

  I've read a lot about this with to turn on and turn off the wifi with the fn + f8 key in win7 and I tried all the solutions, but no one works,
  I tried the new drivershttp://cdgenp01.csd.toshiba.com/content/support/downloads/util_tvap_TC00214700F.exe PVAT, and even the new hw Setup utility appear not turning on wifi switch.
  Is there another way?

  And now to my other question, I deleted the partition of hard drive recovery (big savings) is anyway I can get a the recovery img file or more, I call support so that they send me a recovery cd?

  Thank you

  Hello
  I have the same problem with the wifi FN key but also I noticed that FN + F6 and FN + F7 (bright LCD + /) do not work after installing the package with added value. Without adding value all the keys work (bright LCD +/-, volume +/-, the other is not).
  Any solution for the FN key? It is impossible that I can use the FN if I change the operating system! Other laptops have this problem!
  Toshiba what do you do?

  I'll wait for suggestions.

  Thank you

• Rescue and Recovery will restore all of the disk?

  I searched high and low for an answer to this question, but I'm not. I have use Rescue and Recovery to back up the drive of my laptop. If I have a problem of catastrophic disk, save and recovery will restore my entire drive to a new drive, including the service partition? I have a fully functional and updated disc to date after a full restore? (Guess that I restore using a floppy disk to boot Rescue and Recovery, which have I already have.)

  Well, I decided that I have a couple of hours on my hands and a fresh backup using rescue and recovery (in order to test whether or not he backs up the recovery partition) and a Windows Vista "complete PC Backup" (in this case that it fails).

  The result: Yes, when you restore a recent backup, it will also restore the recovery partition.

  I am very happy.

• Help for the preparation of an emergency on a drive disk external drive via., Dell backup and recovery (DBR) - Basic Version

  I have a laptop Dell Inspiron

  IAM intend to make a rescue disk via., Dell backup and recovery (DBR) - Basic Version

  Now, it says WRT below external link that this process will create two partitions on the hard drive.

  (Wipe all prior content of course.)

  DBR_BOOT (25 MB used out of 500 MB on a FAT32 style MBR partition)

  DBR_MASTER (9.7 GB used off GB 921 on a style of MBR of NTFS partition);

  [See:en.community.dell.com/.../19499639]

  Now, my question is will I be able to save my other files on the external hard drive that I use for the above process?

  (as the above process creates two partitions of 921 GB & 500 MB)

  IAM intend to save a system image from my computer on this disc well also, I have a few 250 GB of personal & video files

  (Iam that will buy a drive hard 500 GB to make the above process...)

  H ipkmishra86,

  You will need to copy your other files on the hard disk before the distribution, you will lose it. When you have completed the process you can put back them on here.

• Windows 7 starts questions about mac and office 2010 following an installation

  It's a long cut as short as vent. I've been miss sold a record of upgrade of windows 8 full disk-shaped, with norton and office 2010. My goal of creating windows on my mac for a course I'm taking. After that know I need windows 7, I bought it online. I created a partition of 80g on my mac charge windows 7, then norton. Until I loaded the office that I was invited to perform the update from apple in the windows software 7. Note before I installed norton, I load boot camp mac utilities according to the instructions. So, followed by all as should be. The prompt update from apple was quick time, iTunes and airport, I checked all and then updated. Then I loaded office 2010 and obtained throughout the process from the Microsoft site. On the last part of the installation, the installation failed due to a mistake of hanging iTunes. I tried again and again, I fixed the update to iTunes to add and remove the section of windows. Then, I got different errors. I decided to remove the whole score without uninstalling all programs again. When I get to the windows live, that this falls priming. I get various error messages whenever I try to start the process. As a header of Bank pool, fatal error and so on. Can anyone help? What is the damage?

  Hello

  Thanks for posting your query in Microsoft Community.

  Because the question is limited to Windows 7 on your Mac with Boot Camp, I suggest you contact Apple Boot Camp support for assistance.

  http://www.Apple.com/support/Bootcamp/

  I hope it helps. If you have any questions about Windows in the future, please let us know. We will be happy to help you.

• I will reciece a WINDOWS 7 upgrade disk will modernize my system current system Windows Vista Home on my HP COMPAQ COMPUTER that I bought at OFFICEMAX store.

  My WINDOWS 7 upgrade disk that I will receive will contain a complete WINDOWS 7 SYSTEM, just in case I have to completely rebuild my system from scratch in the future?

  ·                                 This is the Forum for Windows Update .

  http://social.answers.Microsoft.com/forums/en-us/w7install/threads

  "Download Windows 7 installed and activated on your PC."

  They will help you in the Windows 7 Forum at the above address.

  For any other issue of Windows 7, here is a link to a list of the Windows 7 Forums:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 forum for questions on windows 7.

  All Windows 7 issues (other than Windows 7 update issues) should be directed to the it.

  See you soon. Mick Murphy - Microsoft partner

• My Windows 7 upgrade disk has only 32 bits. I want to install Windows 7 64-bit. What can I do?

  Upgrade to 64 - bit with this situation?
  A few years ago, I bought a PC which has Vista installed on it, but I was given a Windows 7 Upgrade disk to install Windows 7. I was able to create a clean install with upgrade disc. Recently, I discovered that my processor can support 64-bit, so I want to go to that. Problem is the upgrade disc contains the 32-bit version, even though I believe complete dics of Windows 7 contains both versions. It does not mean that I am eligible for the 64 bit version of Windows 7? It's terribly confusing.
  What are my options for installation of 64-bit? The 64-bit version can be downloaded or something? I even use the same product key?

  Will be the product key, I received with my job to drive upgrade with the 64-bit version, I downloaded?

  Yes.

  The key of Windows 7 works with 32 and 64 bit, but can only be installed at a time.

  You may need to use the phone activation, two methods to do this are below.

  1. call Microsoft use the manual phone Activation

  Note: If you always install Windows page enter your product key, do not enter your key and uncheck the "Automatically activate when online" then click OK/next to complete the installation.

  1. start by clicking on the start menu, and then type: slui.exe 4

  2. press enter on your keyboard

  3. Select your country.

  4 Select the telephone activation option, enter the number, do not select all options and wait for a person pick up, then explain what happened.

  2. call Microsoft use the manual phone Activation

  Note: If you always install Windows page enter your product key, do not enter your key and uncheck the "Automatically activate when online" then click OK/next to complete the installation.

  1. open Windows Activation - click the Start button, right-click on computer, click Properties, and then click on the option change your key.

  2. click on show me other ways to activate.

  3 type your Windows 7 product key, and then click Next.

  4. click on use the automated phone system.

  5. click on the location nearest you from the drop-down list, and then click Next.

  6. dial one of the available phone numbers listed.

  7. do not select all options and wait for a person pick up, then explain what happened.

  Questions about installing Windows 7?
  FAQ - Frequently Asked Questions from Installation Windows 7 & responses

• How do I reinstall Windows 7 Upgrade disk on the new hard drive

  Hi all.
  I had a hard drive crash on my Dell XPS420 who settled with Vista. I've upgraded to Windows 7 (from the offer of activation of 3 site) about 18 months ago. I am trying to buy a new hard drive and install Windows 7 onto the new drive. I only have 7 disc ultimate improvement. I don't have a Vista disc. What is my best course of action? Thanks in advance for the help & support.

  If your computer comes with a qualifying previous license such as Windows Vista or Windows XP and the certificate of authenticity is still attached to the machine in good condition, then the COST is reason enough to represent the compliance to the software license agreement. No previous required software installation, which means you can do a clean install with Windows 7 Upgrade disk.

  How to do a clean install with upgrade disc:

  Boot from the Windows 7 DVD

  Click Install now

  Accept the license agreement

  When the option is displayed to select a type of installation, click (Custom advanced)

  Click on drive Options

  Select the disc/s click on Delete

  Click new

  Click on apply

  Click OK

  Click Format, and then click next to proceed with the installation

  Skip entering your product key Windows 7 and complete the installation.

  When you reach the desktop, click Start, right-click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click the link x days before activation.

  Click on the link that says: "show me other ways to activate.

  Enter the product key

  Click next

  Select the Activation of the phone

  Click Next when you enter your key page

  Select your country

  Click Next, call the number listed

  Be sure to explain your situation to the Appeals Officer.

  Provide the installation generated when ID requested by the call agent

  They give a confirmation ID in return, enter it

  Click next to complete the activation.

  However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.

  15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.

  So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.

  or

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

  Resources:

  See the instructions in the thread following the reinstallation of Windows Vista:

  http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_install/repair-man-removed-windows-vista-and-installed/f4ec610a-856b-47a6-9ac2-7d5f07763eb0?msgId=343a6389-3a13-46d1-93fa-342f6a9b8ae1

• MY Hard Drive died and I need to re - install my upgrade disk

  My HD is dead.  I bought a new HD to replace.  Unfortunately we do not have back ups or anything, but it seems that I can not put my upgrade code to complete the installation.  I don't know what to do.   I'd rather not go buy another license that I already have several licenses to upgrade.  Is there a work around?  I can't be the first person on the planet with this situation!

  If your computer comes with a qualifying previous license such as Windows Vista or Windows XP and the certificate of authenticity is still attached to the machine in good condition, then the COST is reason enough to represent the compliance to the software license agreement. No previous required software installation, which means you can do a clean install with Windows 7 Upgrade disk.

  How to do a clean install with upgrade disc:

  Boot from the Windows 7 DVD

  Click Install now

  Accept the license agreement

  When the option is displayed to select a type of installation, click (Custom advanced)

  Click on drive Options

  Select the disc/s click on Delete

  Click new

  Click on apply

  Click OK

  Click Format, and then click next to proceed with the installation

  Skip entering your product key Windows 7 and complete the installation.

  When you reach the desktop, click Start, right-click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click the link x days before activation.

  Click on the link that says: "show me other ways to activate.

  Enter the product key

  Click next

  Select the Activation of the phone

  Click Next when you enter your key page

  Select your country

  Click Next, call the number listed

  Be sure to explain your situation to the Appeals Officer.

  Provide the installation generated when ID requested by the call agent

  They give a confirmation ID in return, enter it

  Click next to complete the activation.

  However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.

  15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.

  So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.

• My hard drive crashed and the only disk operating system that I can find is my Windows 7 upgrade disk. Can I do a full install on a blank disc of this?

  My title pretty much sums up my problem.

  I need to buy a new hard drive.  All I have is the Windows 7 upgrade disk I bought for some time.  I can the Windows 7 installed on this drive, or I have to buy a copy of Vista/XP to install and upgrade?

  If your computer comes with a qualifying previous license such as Windows Vista or Windows XP and the certificate of authenticity is still attached to the machine in good condition, then the COST is reason enough to represent the compliance to the software license agreement. No previous required software installation, which means you can do a clean install with Windows 7 Upgrade disk.

  How to do a clean install with upgrade disc:

  Boot from the Windows 7 DVD

  Click Install now

  Accept the license agreement

  When the option is displayed to select a type of installation, click (Custom advanced)

  Click on drive Options

  Select the disc/s click on Delete

  Click new

  Click on apply

  Click OK

  Click Format, and then click next to proceed with the installation

  Skip entering your product key Windows 7 and complete the installation.

  When you reach the desktop, click Start, right-click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click the link x days before activation.

  Click on the link that says: "show me other ways to activate.

  Enter the product key

  Click next

  Select the Activation of the phone

  Click Next when you enter your key page

  Select your country

  Click Next, call the number listed

  Be sure to explain your situation to the Appeals Officer.

  Provide the installation generated when ID requested by the call agent

  They give a confirmation ID in return, enter it

  Click next to complete the activation.

  However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.

  15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.

  So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.

  or

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• I try the installation key OEM Office or upgrade to another version of Vista

  Hi, I had the same problem here.

  until someone shows me at the door, shouting that I have tried the vista OEM key to install office or upgrade to another version of vista, here are the facts:

  -C' is my work laptop.
  -It was installed with a volume work XP pro license.
  -J' changed jobs, negotiated to keep my laptop in the process.
  -I'm legitimate, I don't want the volume from my previous job license.
  -I am reloading the preinstalled version of vista from the CD supplied with the notebook microsoft (not the CD before installing, I wanted a windows clean and neat)
  -L' label on the back of the PC say "vista home premium OEMAct".
  -I am running windows vista Home premium
  -J' I updated my bios to the latest version
  -vista will not activate automatically.
  -J' tried to call microsoft for manual activation. the IDS are recognized (if you try to enter a wrong number, it is said that there is a mistake), but when I hit "next" after having typed the ID told me on the phone, I get an error indicating that the code is wrong.

  a now I get the Activation Assistant 0xC004E002 error when I try to run it.

  I don't see what I did wrong... someone has a lead what to do next, other than reinstalling windows?
  I don't want to bother to reinstall all drivers and applications (openoffice, java, firefox, xnview, avira antivir...) that I just installed.
  And I want a working solution, as I am not really convinced that reinstall windows don't lead me to the same problem on new.

  Thanks in advance.

  Best regards
  hateshinai.

  Post edited by: hateshinai

  Hello

  First of all-> you have a Toshiba laptop?
  If so,-> to the Vista preinstalled on your laptop is already activated!

  The key at the bottom of the device belongs to the OEM of Vista version and it is just a confirmation that you are using a legal Vista operating system.
  The key cannot be used with MS Office and other versions of Vista!

  If you want to upgrade the Vista then you will probably get a new key from Microsoft.

• Wiping Hard Drive, Reinstalled with Windows 7 with upgrade disk product key error

  My computer has been acting upward, so I back up hard drive and erased the hard drive with the BACK CLEAN ALL command. I then reinstalled windows 7 from my Windows 7 Upgrade disk and restore my files on hard disk. The computer works fantastic and returned half of the memory of the hard drive. A few days later, I get a message on the screen that I have 30 days left until I can produce a product key from the original Windows installation, does not accept the upgrade product key.

  I tried the product key located on the bottom of my laptop for Windows Vista comes with the HP computer. It does not work and it gave me no disk backup for Windows Vista from HP.

  I called Microsoft and they told me to contact HP for the product key. I see on this forum that someone else has written a similar plea, because it is a plea, and HP said to contact Microsoft. In other words, Microsoft says to contact HP and HP says to contact Microsoft.

  I use Microsoft since Windows 3.2 operating systems and have bought a lot of products of them. It's my 3rd HP laptop, my wife is on her 2nd HP laptop. Well you know what? If I don't get this resolved quickly by one of your companies, and I'm not remember Microsoft, I'm through the two of you.

  I don't see where Microsoft is not being fooled off but when it's to the detriment of a loyal customer, so don't worry. HP is also responsible for this. An upgraded version of Windows 7 (to upgrade from Vista or XP) should be smart enough (and I thought it was) to remember that I had the original version and its product key should be enough. Also I don't never told me that I had to keep the old product keys, and it doesn't matter anyway because the product key is always available in my laptop HP, but it does not work.

  I'm not buying another HP without your help and actually buying an Apple Mac for my wife and my next computer if it is not resolved. I think that HP is probably as bad as Microsoft so that it will not be solved and I'm not shelling out more money for something I already own.

  System information:

  Other OS Description not available OS manufacturer Microsoft Corporation system name MADRONA system manufacturer Hewlett-Packard model system HP Pavilion dv6 Notebook PC OS name Microsoft Windows 7 Home Premium Version 6.1.7600 X 86 - based PC processor Intel (r) Core (TM) 2 Duo CPU P7450 2.13 GHz, 2133 MHz, 2 Lossnay Build 7600 system type, 2 logic or the BIOS Version/Date Hewlett-Packard F.24 processors , 12/06/2009 \Device\HarddiskVolume1 SMBIOS Version 2.4 Windows directory C:\Windows directory C:\Windows\system32 peripheral initialization system local United the States Hardware Abstraction Layer Version = "6.1.7600.16385" username madrona\majoraward Pacific Daylight Time zone installed physical memory (RAM) 3.00 GB Total physical memory 3.00 GB available physical memory 1.74 GB memory virtual 5.99 Total available virtual memory 4.66 GB Page file space 3.00 GB Page file C:\pagefile.sys

  I used here from method 3 with success. Basically just throw the disc to upgrade from in Windows and make install an inplace upgrade.

  http://www.winsupersite.com/article/Windows-7/clean-install-Windows-7-with-upgrade-media-128512

• How do to meet the requirements of the earlier version to upgrade disk during the only copy was on HD partition?

  My Compaq computer had problems, so I tried to fix it by using the xp pro upgrade disk I used to upgrade the system initially.  It worked for a bit, but I think that there is a virus that I have not yet.  Now when I try to rerun the repair, he says, he can't find a prior instalation of winows and don't use the upgrade disk to fix.  He wants to put me in a drive containing a full operating system but my Compaq came only with installation on a partition of the HD and I don't have a full version of put in the drive to meet and start the repair.  How can I get past this so that the repair facility can run?

  You will need to find a previous CD of Windows (95/98/ME/NT4/2000/XP) and provide, on demand.

  John