P6110y HP upgrade to DVI - D and HDMI video/graphic

Similar Questions

• Pavilion dv7-4080us: upgrade or replacement for dv7 4080us video graphics card

  I want to know if I can upgrade the memory of my HP dv7-4080us graphics card. He did an ATI Mobility Radeon HD 5650 1 GB of DDR3 memory with up to 3738 MB total dedicated memory graphics card. What this means? I can put more memory or repalce the card? If so, what card should or can I get?

  There is no 'card' you might be imagining. The video is one of the dishes chips soldered to the motherboard. You already have the best video system available for dv7-4000 series of laptops, so there is no way upward to something better.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Latitude 6430u - cannot simultaneously VGA and HDMI output

  We have just received our first batch of 25 Latitude 6430u (2 lots more on the way), and we were surprised that he doesn't at the same time a VGA and HDMI video output. GPU Intel HD4000 said that it should be possible. Someone successfully obtained several monitors working with this device? We lack Windows 8 Enterprise with Dell drivers.

  Sigh,

  It seems that the 6430u uses a LVDS connector instead of an eDP, so the Intel HD 4000 can't handle 3 independent displays. LAME.

  I found this by following the instructions given in this response:

  superuser.com/.../3rd-display-laptop-and-2-displays

• my computer is connected to a new projector with a DVI and HDMI cable, and return the currency I installed correctly but I don't get a picture on the projector

  I connected my computer to a new projector with a DVI and HDMI cable, and return the currency I installed correctly but I don't get a picture of the projector, need HELP.

  Hi Bill,

  Thanks for asking this question to Microsoft Community.

  I will definitely help you to set up the projector, but before starting, I would ask you some troubleshooting questions.

  What version of the Windows operating system is installed on the computer? Do you get any error messages? Have you done a recent software or changes to the material on the computer?

  Here is a link that provides information on connecting to a projector. Go through it and check if it helps.

  Hope this information is useful and provide us with more information for further assistance. We will be happy to help you.

• How can I use two DVI and HDMI outputs for monitors?

  I have a 55 inch LG TV connected to my PC via an HDMI cable. I recently bought a HP 2311 x flatscreen monitor and want to connect using DVI.  But when both are plugged into the PC automatically turns off the DVI output, and switches automatically to use the HDMI that my TV is turned on.  Is it possible that I can have the two outputs working both on my pc?

  Hello

  I suggest you to send your query to this link for assistance.

  http://experts.Windows.com/f/

• U2412M connections PC - DVI and hdmi-TV signal?

  Hello!

  I connect the hdmi-TV signal to my Dell U2412M monitor. This monitor I've used with Desktop PC (DVI cable). I want to have both, PC and TV signal on the same monitor. Is this possible? How to do this? Display port? Cable HDMI to DisplayPort? What sound? (My graphics card has DVI and HDMI output). Here are the specs of the Dell U2412M:

  NOTE from the ADMIN: Broken link has been removed from this post by Dell >

  This is the situation:

  ----------Tv-signal (hdmi)-------------------->--------------------| DisplayPort?

  monitor

  Signal PC Desktop---> - DVI. DVI

  fenekus

  The monitor has no audio output capabilities. He can only power the Dell Soundbar attached. But the Dell Soundbar connects to peripheral output TV audio port to get a sound.

  In theory, you would connect the HDMI cable unit TV HDMI port to the DP U2412M DP in the output port. Turn on both devices, press the Menu button, choose the input Source, choose Display Port.

• HP pavilion p6630f supports output via connector dvi - d to dvi - d to hdmi audio adapter?

  HP pavilion p6630f supports output via connector dvi - d to dvi - d to hdmi audio adapter?

  Hello

  The DVI does not support audio.  You must use a separate with the DVI cable audio cable. There are DVI cables that do not have an extra audio cable in the same sheath, but they are usually not sold in most retail stores.

  There are rumors on the net that ATI could have a special cable where some unused DVI pins were used to route the audio but that could also mean using an ATI video card. It would be a very strange configuration and not one I would recommend.

• Toshiba 32TL838: flicker after fw upgraded in the menus, using HDMI input

  Hello

  yesterday I updated firmware of my 32TL838 to version 6.4.0Y.1 / 94.6.27.8 using the upgrade feature network.

  After the upgrade, I reset the TV to start again with the factory settings.

  During the quick installation after the reset, I noticed a very bad video quality. The entire image flickered, had a ghost effect and looked at interlaced. The menus were almost illegible.

  Once the installation is complete, the TV switched TV (cable DTV) normal mode and at least the TV picture looked quite normal. While the input CABLE is selected, I can also open menus as before, they are displayed correctly.

  But as soon as I switch to the HDMI input, the image becomes nuts once again, just like during the initial installation, including recoveries of TV menu. Sometimes it becomes stable for maybe 30 seconds, but then he is paralyzed again.

  A few words about my setup: TV uses only input HDMI 1 and the cable entry, nothing else is connected.
  Links to HDMI input to a receiver Onkyo TX - SR508 AV which is powered by a Fantec 3DS4600 media player and the Blu - Ray BDP - S373 player.

  Because I expect the question of what-to-your-HDMI-wiring, I traded the HDMI cables but as expected which has not helped at all.

  At least, I seem to be successful by bypassing the problem when you use the Fantec drive.

  Before I updated the firmware, I was able to use the drive with 1080 p/60 Hz and the player has been installed as a result.

  Now I switched to 1080 p / 50 Hz, and the video image seems OK again. (However, I made a short test and as I said, sometimes_
  the image is OK for a short period).

  Unfortunately my BluRay player has no menu to change the frequency, so I watch BluRay or online services, the player offers, is impossible.

  So, what can I do now? A downgrade of firmware (if possible) would be a quick temporary workaround I could accept. But medium-term I'm expecting Toshiba to restore functionality that they promoted and for which I paid.
  (Youtube stopped working with the old firmware and it seems that 1080 p/60 Hz no longer works with the latest firmware).

  Anyone know how to downgrade the firmware using a USB? I already downloaded the previuos version tl838_853886.bin but I do not have a nail how (and if) it can be installed.

  Thanks for your advice
  BELEKTRO

  Hello

  As far as I know the isn t possible downgrade firmware.

  But you said that you noticed this problem by using an external device connected to the HDMI 1 port.
  As far as I know the Toshiba 32TL838 supports 4 HDMI ports.
  I recommend you to check all of the 4 HDMI ports as well as to check all device configuration options.

  Check for example the rate of active movement + option available.
  This option allows to improve the rate of cooling of a TV

• What is the best cable for monitor DVI - D and VGA input connectors?

  I buy HP P6300z desktop computer with ATI Radeon HD 4350 (DVI, HDMI, adapter) graphics card and W1858 monitor VGA; DVI - D input connector. A VGA cable is supplied with the monitor. The VGA cable will give me the best viewing experience or should I buy another cable?

  Buy a DVI - D cable.  DVI means Digital Visual Interface. It will provide images of superior quality on your screen as VGA.

  VGA is analog.

  HDMI (High Definition Multimedia Interface) even better would have been

  Kind regards
  ERICO

  
  

• SL300 and HDMI. External monitor goes black for 2 to 5 seconds then picture comes back

  Hello

  When you use the external monitor with my SL300, the screen off for 2 to 5 seconds, then reappear. It does this perhaps once every two days. Sometimes this happens much more often. And then it's very annoying. When the image reappears, the HDMI signal indicator (monitor is BenQ 2400W) is displayed in the screen.

  I tried different cables without change. My PS3 connected to my screen via hdmi cable and it works fine.

  Any idea what the problem might be?  I think its my SL300 signal loss but wanted to see if anyone else had this experience?

  My hardware:

  BenQ 2400W (1920 x 1200)

  SL300, Intel graphics version

  I "solved" this problem by using the following cable HDMI to DVI instead of HDMI-HDMI cable:

  http://www.DealExtreme.com/details.DX/SKU.2703

  Every single HDMI-HDMI cable gave these power cuts. According to Lenovo support, it is probably a driver related problem.

• I just upgraded to Safari 10 and now can not watch videos on youtube

  I just upgraded to Safari 10 and now can not watch videos on youtube

  If the videos require Flash, you can copy the Chrome URL and watch videos. Chrome has a built in flash player.

• I've been upgraded to El Capitan and electricity went off and stopped the session.  I don't have time to continue for 12 hours.  It is the CV.  How can I cancel until I have more time?

  I've been upgraded to El Capitan and electricity went off and stopped the session.  I don't have time to continue for 12 hours.  It is the CV.  How can I cancel until I have more time?

  Hello nancy milano,.

  Thanks for this info and choosing the communities Support from Apple. I know how important is able to complete your update to El Capitan at a later date! The good news is that you can simply delete the "install Mac OS X" install app in the Applications folder on your Mac. Then you can open the Mac App Store when you're ready to update and restart the download from the tab updates or searching through the Mac App Store for El Capitan. This is a resource that explains the process of update more:

  Update of OS X El Capitan

  See you soon!

• Upgrade to el capitan and hoping to drive DVD would work properly but no, still do not play some of my DVDs. Is there an upgrade available? my library of playable DVD shrinks

  Upgrade to el capitan and hoping to drive DVD would work properly but no, still do not play some of my DVDs. Is there an upgrade available? my library of playable DVD shrinks. IMac originally purchased in 2010. DVD 5.9.5

  I'm having no problem with my DVD.

  Could you give more details about those who are out of work?

• Upgrade to El Capitan and Win10

  Hello

  I have an iMac that has Yosemite and Windows 7. I use Parallels desktop 9. (But the windows partition is loaded through bootcamp)

  I get the message that windows free 10 ends soon.

  So I think upgrade to El Capitan and Windows 10.

  So I had to buy Parallels 11 to use the two new operating systems. (because 9 does not work with either)

  Here are the steps I take to do all three upgrades? I want to assure you that I am not missing something (steps):

  1. put on level 9 to 11 parallels

  2. upgrade to El Capitan

  3. connect via bootcamp and upgrade to Windows 7 to 10

  4. restart Windows mac and link 10 partition in parallels.

  Upgrades of the OS are big and not easily reversed, so I don't want to make a mistake.

  Any help is greatly appreciated!

  Thank you

  Avoid errors or problems with the updates of the first execution of a bootable backup of what you have that works. I suggest the following:

  Restart the computer after the ring, press in and hold the Command and R keys until appears the Menu Utility.

  1. Select utility disk in the main menu and then press the continue button.

  2. Select the destination volume in the list on the left.

  3. click on the tab restore in the main window of disk utility.

  4. Select the destination volume in the left list and then drag it to the Destination field.

  5. Select the volume of the source of the list on the left and drag it to the Source input field.

  6. check understood you, and then click Restore.

  Destination designates the external backup drive. Source means that the boot disk internal.

  Regarding the Parallels just upgrade the software and verify that your Windows system still works. You cannot proceed with the upgrade of OS X. Look this first: basic steps for the OS X upgrade.

  You can update Windows from Parallels. It is useless to try to boot from the installation of Boot Camp. In addition, you must first remove some components of Parallels on your Windows system to start independently.

• I just upgraded to Firefox 8 and now I can't connect to webpages about via Mozilla. I can always connect through Internet Explorer.

  I've upgraded to Firefox 8 and I can't establish an internet connection to any webpage via Firefox. I removed the Firefox program and re-installed through Internet Explorer with the same results.

  One possible cause is security software (firewall) that blocks or limits Firefox or plugin-container process without informing you, possibly after the detection of changes (update) for the Firefox program.

  Delete all rules for Firefox in the list of permissions in the firewall and leave your firewall again ask permission to get full unlimited access to the internet for Firefox and the plugin-container and the update process.

  See:

  • https://support.Mozilla.com/kb/server+not+found
  • https://support.Mozilla.com/kb/firewalls