p6214y won't recognize 2nd hard drive

Similar Questions

• Tecra A10 does'nt recognize 2nd HARD drive in the Bay of the STRANGE

  Hello

  My TECRA A10 - 1 HG PTSB1E does'nt recognize my second HDD that has taken the place of the cd-rom.
  I use a SATA caddy and the boot of the A10 with a CD-rom error!
  is it not possible to use a shopping cart with a TECRA A10?
  Does anyone have a solution?

  Thank you for your experience of return.
  Best regards

  Hello

  I guess that the Tecra A10 does not support these updates.
  The 2nd SATA controller does not seem to support the additional HDD instead of ODD.

  But I've read a few things to get such2nd as recognized HARD drive.
  You must start the laptop without the HARD drive caddy in ODD Bay.
  After that the Windows system has started, you can plug/connect the HARD drive caddy and system PnP service should recognize the new device.

  I think this isn't the best solution, but it seems like it s the only way to get this HDD caddy recognized in the Bay of the STRANGE

• Qosmio X 500-do not recognize 2nd hard drive

  Hello

  I had performed a clean installation of windows 7 Home Premium (64-bit) and accidentally formatted the two hard disk using custom window Installation.

  Windows installation went well, but the system is not reconising hard 2nd drive.

  Can someone please help and advise what I need to do to remedy this.

  Thank you very much.

  MARWON

  Is the second HARD drive recognized when you open the disk management option in computer management?

• HP Envy 700-215xt does not recognize 2nd hard drive

  I added 2 hard drive, Toshiba 2 GB (DT01ACA200), and it will not be displayed on the player list if I click on the computers tab under the start icon.

  It is displayed under the disks in Device Manager and it says "this device is working properly." under the general tab.

  Under the Volumes tab on the status line it is said "not initialized".

  Any ideas?

  Thank you

  Hello:

  You may use the tool of Windows disk management to partition and format the drive.

  This looks like a tutorial for a XP operating system, the General procedure is the same.

  http://dashboardhelp.datarobotics.com/170/en/win/formatting_drives_using_windows_disk_management_utility_help.htm

• How to check if the 2nd HARD drive is possible on the Satellite Pro A200 PSAE7?

  Hello

  My A200/PSAE7 has a 200 GB HARD drive. For backup reasons, I would like to know - or learn to know how check - if my A200 already have the hardware support for a 2nd HARD drive, next to the slot for a 2nd HARD drive.
  In the BIOS, I see 'Toshiba MKxxx - hard drive' and 'hard drive - None '. Is the last entry in the BIOS is a sign that a 2nd HARD drive is supported and has to be put in the second location of HARD drive?

  Thanks in advance for any answer!

  Best regards
  Andreas

  You can do the following:

  Open the cover when the 2nd drive HARD so-called must be installed and check for some SATA connectors or cables. If there is an unused SATA connection so you can upgrade, if no, then you will need to backup your data on USB - HDD or whatever.

  If in the BIOS is something now, he won't say that he is physically present.

  Welcome them

• How to add a 2nd hard drive for HP Pavilion DV7!

  How to add a 2nd hard drive for HP Pavilion DV7-3165DX, product # WA794UA or WA794UAR.

  (1) classification of the HDD, hard drive, hardware kit. Disc kit HARD material includes mounting rails, static shield, screws, insulators in rubber and SATA cable from the motherboard. Check your model & product # to ensure compatibility.

  Material of parts HP HDD Kit 517639-001 for DV7-3165DX product # WA794UA and WA794UAR.

  (2) training of consult - Windows 7 PDF, table of contents, 7 replacing a drive in secondary hard drive Bay. This will show you how to install a 2nd HARD drive in an HP DV7.

  Readers - Windows 7 PDF

  (3) to select a Windows 7 computer, select the installed HDD, Format (if not already formatted).

  (4) if the drive HARD does not appear in Windows 7 under computer, go to the Start Menu, find programs and files, enter "Computer management", select storage, disk (Local) management, look for the 2 HARD drive Bay (should appear as disk 1, Bay 1 HARD drive should show as disk 0), Format of the 2nd HARD drive (the one that you just installed).

  Update: I have the 2nd HDD (WD 1 TB) installed, Windows recognize now after completing the steps I mentioned in step 4, Format with default allocation NTFS 931,51 GB free, 118 MB USED to put in shape. Format exFAT to allocation by default 931,51 GB free, 1 MB used to put in shape. I chose NTFS format to reduce the fragmentation of the file.

  My solution.

• You attempt to add a 2nd hard drive

  I have a HP Pavilion Elite HPE 510 t. I try to add a 2nd hard drive. The 2nd hard drive is a Toshiba 1 TB 7200 RPM 6G.

  Accordingly, the 1st HDD was plugged on SATA2 and the CD-ROM was connected to SATA1. It worked and it started ok.

  I added the 2nd hard drive, plugged on SATA3, went into the BIOS Setup and it has not even see SATA3.

  I then plugged the CD-ROM on SATA3 and the 2nd hard disk on SATA1 and lit, is went into the BIOS config amd saw 2 hard drive and a hard disk 1, it did not see the Wired CD SATA3. Then I tried SATA4-nothing.

  I have advanced and partitioned and formatted the hard drive into two partitions 2 and recovered the data from a backup on each partition.

  It works very well, with both devices, but nothing I have connect SATA3 or SATA4 is recognized by the BIOS.

  Can someone tell me why? is there a jumper on the system board or a setting in the BIOS that turns on SATA3 and SATA4?

  Are my bad SATA3, SATA4?

  I've seen the specifications for hard disks. He is said to use a 1 to 3G 7200 RPM. IS the fact that I use a 1 to 7200 RPM 6 G the cause? Even with the hard drive 2 disconnected and hard drive 1 SATA1 or 2 and SATA3 or 4 CD, it does not yet recognize the CD-ROM drive.

  I tried to pass autour SATA data cables, but it has not changed. Anyone know why the system will not recognized the connected CD-ROM SATA3 or SATA4?

  Or whatever it is well plugged SATA3 or 4? I can run both hard drives, but then I don't have a CD-ROM drive, or I can run a hard drive and a CD-ROM drive, but not 2nd hard drive.

  Any suggestions? I know choose IDE used to have to set a date for the cable, but I don't think that SATA requires that.

  Am I wrong?

  I bought a $70 ServerSupply.com motherboard, succeeded him and it solved the problem.

  Someone here even suggested, but me. I forgot what email I signed up for this site.

  Now officially logged as me.

• Add the old computer as as 2nd hard drive to new XPS 8700

  Hello

  My old computer - Dell Vostro 410 just stopped working so I now have a 8700 XPS.

  My problem is that there are some files on my old drive hard vostro that I need. He has been using Windows 7 and the hard drive, I have upgraded to a Western Digital Black Caviar 1 TB SATA.

  But the new '' runs on Windows 8.1.  I can't upgrade the old hard drive to the old computer died. Someone at - it ideas how I can get my info from my old to my new drive?

  I tried to install the old disk until the 2nd hard drive but the system does not recognize it.

  Any help would be welcome.

  Thank you

  Hello and yes I have an answer.

  Also, I had a second drive win 7 ult and it went out to install in my new 8700 XPS thing is that I already formatted the disk to work to the point 8.1. He came to light, a UEFI system installed, may fail to start if a secondary drive is attached that contains logical partitions. Of course, this should be an MBR disk configured, but if it has at least one primary and one extended partition, it will stop Windows 7 and Windows 8 start.

  To correct this test facility 2nd main drive, then use a boot disk to get the computer running then access the disc to remove files.

• How to use the 2nd hard drive internal for storage?

  Hi, I am a newbie in all of this. I would use the 2nd internal hard drive of our mac mini server (end 2012) for storage (in fact, I'll things rsync from a remote server to here. but this is not the point here.). The thing is, I don't know how to access the 2nd internal hard drive and where to start. I did all of the following commands in the Terminal, but I don't really know what they mean, and what can I do with this information. I've been Googling but most are guides on how to install a 2nd hard drive etc. I hope that the information below is enough for someone to give me advice please?

  Thank you!

  

  

  

  That shows disk utility?

• 2nd hard drive in Satellite Pro P200

  Hello world

  I have a Satellite Pro P200.
  Anyone know where I can get an advance and a shopping cart to install a 2nd hard drive?

  As far as I know your laptop can be improved with the second HARD disk if the SATA connector is available.
  When you remove the HARD drive to the second HDD can you see it or not?

  I have the Satellite P200D with place for second HARD drive, but there is no connector HDD SATA upgrade is not possible.

• Portege M750 - 2nd HARD drive in the Bay select instead of optical drive carrier

  I just bought I used Portege M750 because my M700 was broken. Unfortunately, the berries to choose between the two models are not compatible. Although the availability of a 2nd drive hard trolley is mentioned in the user manual, I couldn't find the part of the disk for the M750 caddy. I tried a standard SATA-SATA HARD drive caddy, but I get a message "select Bay error" at the start, although the caddy runs under windows, as long as you do not hibernate.

  Does anyone know the part no of the real 2nd hard drive for Portege M750 caddy / M780? Or is there another 2nd carriage of hard drive that works with the M750 without restriction?

  Hello

  I guess that you will need a hard drive caddy part number: P000452980
  Then you could place this in the Toshiba Ultra Slim PA3408U-2CTE and PA3408U-1ETC HARD disk adapter

  But you can also contact the Toshiba ASP in your country to get a confirmation...

• Satellite A300-1J1 - how to install 2nd HARD drive?

  Hello

  I bought a Satellite A300 and I see in the workbook loads it is possible to add a 2nd hard drive. So I bought one and when I opened the box of hard drive, I have not found a connector to connect to my hard drive. I think I have to install a SATA connector, but I have not found a way to proceed.

  Thank you

  PS: Excuse me if you find mistakes, I don't speak very well

  Hey,.

  If there is no second SATA connector on the motherboard it s not possible to install 2nd HARD drive because you can t add such a motherboard connector.

  As far as I remember there are other threads on A300 and 2nd drive HARD here in the forum and the point is that all A300 using the same case for laptop, but the mothers are different. So you can have a 2nd HARD drive Bay but not connector.

• Satellite A200 could not recognize the HARD drive during XP installation

  Hi all
  I need help with my laptop, please...

  My problem is,
  I have a notebook by Satellite A200, and the operating system is Vista, am not satisfied with Vista at all so I bought a Windows XP bootable CD... When I tried to install it it gave me a massage that he could not recognize my hard drive...

  I checked the Web from Toshiba site and downloaded the files from the storage for XP Manager as someone told me it could be the SATA problem and you must apply on your hard disk for XP will see it?

  The question is:
  How much is real?
  How can I install XP on my PC now?
  can I install Storage Manager while I'm on Vista and then install XP?
  I put the Storage Manager on a CD and boot from it?

  am really confused because when I extracted the Storage Manager and view the files I found the setup button and a few other folders, and I do not know what those to use because I don't know what is my hard drive... and any help will be much appreciated

  Thanking you a lot in advance

  Hi abu´s,

  Here´s a suggestion: Please use the search function in the forum because this subject has been discussed about 1000 times!

  Here´s a link to a thread were talking about installing XP on their machines with the need of the SATA drivers. Furthermore, it is important to doesn´t if you have a different machine, the procedure is always the same:

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=26040

  Cheers and good luck

• 2nd hard drive for the Satellite Pro A200

  Hello

  I have the Satellite pro A200 (PSAE4E-03401FDU). The LT has an option for a 2nd hard drive, but it is not included a cable.
  Someone knows the reference to the 2nd hard drive cable?
  Thank you!

  Stand by.
  When you remove the HARD drive to the second HDD can see HDD SATA conector?

• Tecra S3: Installation of Vista does not recognize the HARD drive

  I try to install Vista Ultimate on my Tecra S3, but installation does not recognize the HARD drive.

  I tried to find the driver for Vista for my computer, but not found RAID.
  Tried it with XP drivers, but no longer works.

  Do you have an idea where I can download Vista drivers for RAID?

  THX

  Hello

  Your suggestion is good. The Tecra S3 supports the RAID, and the RAID driver is required to install the OS on the HARD drive.
  On the European driver Toshiba page I found a RAID for XP driver.

  I put t know if this driver will run under Vista, but I recommend to test.
  The RAID XP 1.3.8.0 driver version can be downloaded from this site:
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=EU

  Please note; You can store the RAID driver on an external USB and Vista should recognize it!

  Good luck