P7-1020: chipset

I installed a new Firewire PCI Express card on my motherboard AMD Phenom IIx4 9607.  All the drivers installed fine except one: PCI to PCI. The store where I bought is recommended that update the Chipset drivers.  Which will work?  My HP support assistant does not indicate that I need an update.  Are there other possible solutions?  Whenever I restart my computer, it tries to install the drivers and fails.

Thank you

Dan

Driver chipset according to AMD for the chipset of the series 7 for Windows 7 (64-bit) should be what you need.

http://support.AMD.com/en-us/download/chipset?OS=Windows%207%20-%2064

If you specify the string for the PCI bridge PCI\VEN to PCI, you can update that instead. Post here and I'll see if I can find the driver for you. The following image is an example where the PCI\VEN string for any device in Device Manager.

Tags: HP Desktops

Similar Questions

  • Stack Bluetooth can not be installed properly on Satellite C855 - 29M

    Hello

    I just reinstalled Win 7 on my Satellite C855 - 29 M and have installed the downloaded drivers on the Toshiba site, which worked well. I had an unknown device in Device Manager that I discovered was because I needed to install the bluetooth stack.

    I downloaded and installed bfdp-20130924160827, then bltstk 20130924152252, as suggested on these forums, but after restarting the laptop, it will load Windows, then restart, then asks to use repair or start windows normally.

    None of these options worked so I have to use F8 know last good config that worked and when the laptop started to the top there was a message about the bluetooth stack with a missing file. I uninstalled battery bluetooth redownloaded and reinstalled but it's same thing.

    Any ideas guys?

    Hello

    To be honest I don't know what the problem is here and what exactly did you do.
    I checked the download page on http://www.toshiba.eu/innovation/download_drivers_bios.jsp and the fact is that your laptop is fully supported for Win7 64 bit so all necessary drivers, tools and utilities are ready for download from Toshiba.

    Here is the correct order of installation for your machine:
    Windows 7 64-bit SP1
    SW 9.3.0.1020 Chipset installation utility
    Intel Management Engine Interface 8.0.1.1399_Package
    Driver Intel 8.15.10.2639
    and/or
    8.932.5.3 - a 120120-132503C AMD display driver
    Driver Intel Rapid Storage Technology 11.0.0.1032
    Realtek Audio Driver 6.0.1.6559
    ATI HDMI Audio Driver 7.12.0.7704
    HD 1.12.0300 SRS Premium Sound Technology
    Synaptics Touch Pad Driver 15.3.38.2
    Realtek LAN Driver 7.48.823.2011
    Driver Realtek Wireless LAN Driver 2.00.0016
    Intel Wireless Display 3.0.12.0
    Driver Realtek Bluetooth v2.3.9.0211.2012 filter package
    Battery Bluetooth for Windows by Toshiba v9.00.00T
    Bluetooth Monitor v4.08
    Intel USB3.0 Driver 1.0.1.209
    Realtek 6.1.7601.30130 card reader
    TOSHIBA value added package 1.6.0021.640203
    TOSHIBA Sleep 1.4.0022.000104 utility
    TOSHIBA resolution + plug-in for Windows Media Player 1.1.2004
    TOSHIBA Media Controller 1.0.87.5
    TOSHIBA Media Controller plugin 1.0.7.7
    TOSHIBA Network Device ID registry setting tool 3.0.32.4 - 20
    TOSHIBA Web Camera Application
    PatchFiles PCIIDEREG - 1.2
    PatchFiles TosVolRegulator_1.1

    Everything that you have done is good and all you can do is remove preinstalled components BT system, and after restarting the laptop, try to install again.
    I don't know if this is the solution for you, but you can try to reinstall Win7 and install all the following stuff list installation displayed.

  • Portege R930 - 1-d 0 Ericsson Mobile Broadband - device H5321GW unknown

    Morning all,

    We bought two Portégé R930 that came pre-installed with Windows 7 pro,
    We have upgraded to Windows 7 Enterprise,
    I downloaded the drivers and installed them fine, but I have problems with is the Ericsson H5321GW for Toshiba Broadband USIM Port.

    It shows as an "unknown device" in Device Manager.

    I know that this is, as I compared it to the machine that still had Win 7 Pro.

    Can someone enlighten me as to what drivers I need to install to get this working, I downloaded and installed all the relevant drivers from the Toshiba web site.

    Any help would be greatly appreciated...

    Hello

    The laptop supports the 3G (H5321gw) of Ericsson module.

    You must install the [3G driver v 7.2.5.4 | http://www.toshiba.eu/innovation/download_driver_details.jsp?service=EU&selCategory = 2 & selFamily = 4 & selSeries = 151 & selProduct = 7565 & selSh ortMod = 3581 & language = 13 & selOS = 30 & selType = all & yearu pload = & monthupload = & dayupload = & useDate = null & mode = a llMachines & search = & action = search & macId = & country = al l & selectedLanguage = 13 & type = all & page = 1 & ID = 86455 & OSI D = 30 & driverLanguage = 42]
    Do not forget also that Ericsson Wireless Manager v 7.2.1.0 is installed.

    Here a short driver list that must be installed:

    Windows 7 SP1 of Win7
    PatchFiles V1.1
    .NET framework 4.0 [TRO]
    SW 9.3.0.1020 Chipset installation utility
    Intel Management Engine Interface 8.00.03.1427
    Intel AMT 8.00.03.1427 software
    Driver Intel 8.15.10.2712
    Intelligent management of the screen TOSHIBA v1.0.3.0
    Driver Intel Rapid Storage Technology 11.0.0.1032
    Technology of quick start Software Intel 1.0.0.1022
    ALPS Pointing Device Driver v7.x6.303.214
    Synaptics Touch Pad Driver 15.3.27.1
    Realtek Audio Driver 6.0.1.6591
    SRS Premium Sound 3D 1.12.1800
    Driver Intel LAN 16.8.46
    Intel Wireless LAN Driver 15.1.0.21.1.s32
    Intel Proset 15.1.0.0.2.s32_
    Intel Wireless Display 3.0.13.0
    Bluetooth Monitor v4.08
    Battery Bluetooth for Windows by Toshiba v9.00.03T
    USB3.0 Driver 2.1.28.0
    Driver Intel 1.0.4.220 USB3.0 [HF4]
    Ericsson 3 G driver 7.1.0.3
    Ericsson Wireless Manager 7.1.0.2
    Driver O2Micro 1.1.4.207G smart card reader
    Ricoh 2.15.17.02 card reader
    Driver USB-Serial V1.3.0
    TOSHIBA value added package 1.6.0027.320202
    TOSHIBA Fingerprint Utility V2.0.0.9
    TOSHIBA Web Camera Application V2.0.3.33
    PatchFiles PCIIDEREG - 1.2
    PatchFiles TosVolRegulator_1.1
    PatchFiles TBMINITREG-1. 0 t

  • Portege R930-122 - Toshiba VAP REGDB get impossible point Win7 Pro 64-bit

    The toshiba Portege R930-122 as value added package reports during installation regDB get point is not.

    Start, change or remove SW procedure leads report.
    Toshiba Flash cards program is installed, but allowing on deactivation function keys is no difference (not driving function keys).

    Toshiba accessibility reports: this system cannot make use of Toshiba accessibility.

    Function keys worked until I upgraded to some Toshiba and Intel video driver packages, but can't find that one is the cause.

    You happen to know where to look?

    Hello

    Without the good work Toshiba PPV, other software Toshiba would not work properly.
    It is important to get the PPV of work package before you start the installation of other software from Toshiba!

    From my point of view of a few you should update the Win 7 in the last State before starting the installation of the software. The Win 7 SP1 must be installed before using the additional software.

    I found some installation instructions and the correct order:

    Windows 7 SP1 of Win7
    .NET framework 4.0 [TRO]
    SW 9.3.0.1020 Chipset installation utility
    Intel Management Engine Interface 8.00.03.1427
    Intel AMT 8.00.03.1427 software
    Driver Intel 8.15.10.2712
    Intelligent management of the screen TOSHIBA v1.0.3.0
    Driver Intel Rapid Storage Technology 11.0.0.1032
    Technology of quick start Software Intel 1.0.0.1022
    ALPS Pointing Device Driver v7.x6.303.214
    Synaptics Touch Pad Driver 15.3.27.1
    Realtek Audio Driver 6.0.1.6591
    SRS Premium Sound 3D 1.12.1800
    Driver Intel LAN 16.8.46
    Intel Wireless LAN Driver 15.1.0.21.1
    Intel Proset 15.1.0.0.2.s32
    Intel Wireless Display 3.0.13.0
    Bluetooth Monitor v4.08
    Battery Bluetooth for Windows by Toshiba v9.00.03T
    USB3.0 Driver 2.1.28.0
    Intel USB3.0 Driver 1.0.4.220
    Ericsson 3 G driver 7.1.0.3
    Ericsson Wireless Manager 7.1.0.2
    O2Micro smart card reader driver
    Ricoh 2.15.17.02 card reader
    Driver USB-Serial V1.3.0
    TOSHIBA value added package 1.6.0027.320202
    TOSHIBA Fingerprint Utility V2.0.0.9
    TOSHIBA Web Camera Application V2.0.3.33
    PatchFiles PCIIDEREG - 1.2
    PatchFiles TosVolRegulator_1.1
    PatchFiles TBMINITREG-1. 0 t

  • Satellite Pro L850-1DV: manual driver installation repair md5 command

    Technical support could please provide some details on the correct order to install the downloaded drivers from Toshiba for a Satellite Pro L850-1DV for Windows 7?

    Also, is there another method to install the drivers to download and unzip the 44 separate drivers?
    I remember there are 47 drivers that are installed during a repair recovery partition but 44 available for download.

    I guess things like the creative software recovery media are not included in these downloaded drivers, or something else that does not included?
    I would like to try an install of Windows 7 media.

    I could also ask if anyone with a L850-1DV and appropriate tools, such as a Linux installation might be able to tell me the sum of md5 checksum for the recovery hard disk partition. That would be fantastic!

    Best wishes,
    David

    Try this:

    Windows 7 SP1 of Win7 64 bit
    SW 9.3.0.1020 Chipset installation utility
    Intel Management Engine Interface 8.0.1.1399
    Driver Intel 8.15.10.2639
    Driver Intel Rapid Storage Technology 11.0.0.1032
    Realtek Audio Driver 6.0.1.6559
    ATI HDMI Audio Driver 7.12.0.7704
    HD 1.12.0300 SRS Premium Sound Technology
    Synaptics Touch Pad Driver 15.3.38.2
    Realtek LAN Driver 7.48.823.2011
    Atheros Wireless LAN Driver 9.2.0.474
    Atheros Bluetooth Driver Package v1.0.12 Filter
    Battery Bluetooth for Windows by Toshiba v9.00.00
    Bluetooth Monitor v4.08
    Intel USB3.0 Driver 1.0.1.209
    Realtek 6.1.7601.30130 card reader
    TOSHIBA value added package 1.6.0021.640203
    TOSHIBA Sleep 1.4.0022.000104 utility
    TOSHIBA resolution + plug-in for Windows Media Player 1.1.2004
    TOSHIBA Media Controller 1.0.87.5
    TOSHIBA Media Controller plugin 1.0.7.7
    TOSHIBA Network Device ID registry setting tool 3.0.32.4 - 20
    TOSHIBA Web Camera Application V2.0.3.33

  • model hp pavilion slimline s5-1020, with intel g41

    will be slimline s5-1020, hp pavilion with support for intel g41 express chipset the new monitors led 1080 p, this monitor is lcd, hp, res 1280 x 1024.   It will support higher resolutions... 20 inch screen

    The integrated graphics s5-1020 should support resolutions up to the following:

    The interface DisplayPort resolution up to 2560 x 1600

    Digital video interface (DVI) up to 2048 x 1536 resolution.

    Intel G41 Chipset Info

    However, it seems that the s5-1020 only has a VGA output. This means that the resolution should be substantially the same, but it will not support HDCP (content protection high def).

    Frank

  • On a HP pavilion DM3 with inside graphics family of chipsets, Mobile intel 4 series I see a message code 12

    I have a HP Pavilion DM3 1020 ED. This machine has a "Mobile intel 4 series chipset family ' graphics card, which does not work.

    I constantly get a message code 12, "insufficient resources". I also see 2 of these devices in the devicemanager, a normally hidden.

    One hidden does not show a failure, I normally see the error. The laptop works with the standard VGA driver in windows.

    I tried on:

    -Update the driver software

    -Deletion of the driver software and reinstall it.

    -Turn off the appliances (a first for a moment, then both of them)

    -Turn off appliances, remove drivers, then reinstall them using.

    All of these methods did not work.

    Does anyone know another solution?

    Win7 Pro & Home Premium are identical except Pro has 3 more features, which none have no impact on the drivers installed, or that the underlying system.

    If it's OK under the Premium family edition (using the same programs) and not under Win7 Pro it seems to indicate that either another program or hardware has been installed then (assuming that if it was a clean install all drivers of HP were installed/updated)

  • I have a graphics card internal "Intel (r) G33/G31 Express Chipset Family" which is supported by all other browsers expect Firefox. I'm under Windows8

    I have trouble understanding why h/w acceleration is not supported for my graphics card. I have an internal card "Intel (r) G33/G31 Express Chipset Family '. Firefox said "Blocked for your version of the graphics driver" under troubleshooting information. I use Firefox beta 18 under Win8x64. So, here's the problem. When I ran Windows7x64, h/w acceleration was available under chrome & limiting too. I complained ever really because I realized that my card was about 5 years old. When I moved to Windows8 I was planning on getting a new graphics card, to my great surprise, Intel had released new drivers for this version of windows, but suddenly I was getting full throttle under IE, Chrome & Adobe flash plays also support accelerated videos. It would be useful that someone could tell me why Firefox only seems to have a problem.

    Hello

    Please see this.

  • HP s 4330: cannot install Windows, freezes before restarting. [solved: chipset defective stepping]

    Hello!

    I am banging my head on the wall with this case, can not understand, how to proceed.

    My experience: I worked a few years as a computer store technician, especially on desktop computers, so at least vaguely, I know what I'm doing, and I'm very careful when handling material.

    Background of the computer: I got a used HP 4330 s after the deceased family member. No fringe, pretty clean, no damage or traces of fall release. He had dead hard disk (click), broken DVD (engine brackets bent, I am told it is a child work) and was very dusty (blocked fan). I removed the optical drive, carefully removed all the dust, replaced heat is dedicated to the Sub CPU and put inside SSD, I took my other machine (erased). In the BIOS, I went from starting EFI.

    I jumped into the USB with Windows 8.1 fresh install, which ran well, until he wanted to restart. Screen went blue/violet (same color as the background of the normal installation), and it stopped, no disk activity, nothing. I turned to bike it, Windows installation proceeds, but failed. This is repeated several times.

    Steps I took to solve the problem:

    -Legacy mode and I tried to install again, same result.

    -Memtest Ran, past, memory switched to a few specimens (DDR3 and DDR3L), tried both slots, pass all, Windows will not complete the installation.

    -Traded stock to i5 - 2520M i3 CPU I had to hang out, which has been removed from the machine work (during upgrade), same result.

    -Done everything once again, this time without the battery and using big HP 120W 85x0w charger, same result

    -Exchanged on a different disk, same result.

    -Try exchanging AC7260 network card, only to discover he is blacklisted (* beep *?), removed wifi do map altogether, no change

    -Traded thumbdrive to another, and I tried two different Windows 8.1 relies

    -Turn off all devices in the BIOS, except USB.

    -Tried to install Ubuntu, only to find out that it works perfectly, but it will not boot from EFI, had efibootmgr shows the correct entries, laptop says that it cannot find the operating system.

    -Hiren Boot CD with BartPE is Windows XP starts and works very well.

    -Check time CPU, at a time using reporting and pirometer software, it does not exceed 65 degrees Celscius in any moment, which is well below the critical temperature on both processors.

    BIOS is F47. To my surprise, it is newer than what I can find in the download page (F07?).

    Can what steps I take to close on the issue? I would leave it under Ubuntu, but I need Windows on this computer, and I'm afraid he's going to go belly up.

    Last updated.

    First of all, doughjohn - problem is not in the initiation of the stop, but it will not accomplish the closure. There is almost everything disabled except BNT kernel and the video driver.

    The problem has been very difficult to diagnose, until I found a friend who also had the same machine.

    And here's the final solution:

    Like unbelieveble as it is, all three motherboards have manufacturing defects.

    Problem is the chipset: all of them, as, as I suspected, have Cougar Point B2 chipset with SATA bug. This degrades the connection of the HARD disk. There were two clues: USB3.0 adapter SATA with Windows 8.1/10 work and fine closures. Same disk moved in the hard drive bay or optical Bay can not close correctly and works over slow (!). Second, was my friend who had same 4330 s specifications, but without problems. I disassembled the machine and to my surprise he chipset B3, with visible signs of flow around it, and fix the markings certified HP. This laptop was RMA would once. I moved my installation to his mother, and he also starts very well on SATA ports.

    This is the first (and only) for laptop with Sandy Bridge-era components that suffer from a degradation of link chipset primary HARD disk SATA lines I've seen so far.

    To sum up: HP, your fault this time.

    I sold the laptop and I'm looking for a new machine, it will probably take HP 6470 B, if I can find all the components.

    Thank you for all those that the air here and offered advice and guidance. I really appreciate your help!

  • HP pavilion hpe h8-1020: evga geforce gtx 950 in hp pavilion hpe h8-1020

    Hello guys I have a hp pavilion hpe h8-1020 and I am looking to upgrade to a nvidia gtx 950 is it compatibile, what I need to supply?

    Hello

    There is a unknown specification for your motherboard that will prevent you from installing a new 3.0 PCIe x 16 graphics card. Maps 3.0 is backward compatible with PCIe x 16 2.0 slots. Your motherboard may have a PCIe x 16 1.0 slot. None of these options below works on your PC if you have PCIe x 16 version 1.0

    The Radeon HD 6570, an option to purchase, is a PCIe x 16 card USB2.0. You can have a 2.0 slot. It is unclear when we look at the characteristics of HP for your PC.

    I got a HD 6570. You could not install drivers from AMD with the version of HP of this card. You need to use the HP drivers. It is possible that this card is not a 2.0 card even if the consumer version is a USB2.0 card. We can only guess.

    MSI is rolling out hybrid Nvidiacards soon. Try anything tangible yet seen. NVIDIA is slowly releasing the 1000 series cards that require less power. Maybe some OEM will also include hybrid versions that will work on your PC any time.

    The 900 series Nvidia graphics cards need the UEFI BIOS.

    Your PC has a legacy BIOS.

    You have a 300 Watt power supply. You will have to upgrade from food to run a card AMD and respect the strict minimum if you can install a TG 640 GDDR5 map.

    You may be able to install (you need a PCIe x 16 slot 2.0) Nvidia 600 series cards or watch hybrid of AMD cards by Sapphire.

    AMD cards are longer and require larger power supplies.

    You should check that you have the power and the room to install two graphics cards. The cards are also double slot. You will need to verify that you can install a card double slot. Even once, you need a PCIe x 16 slot on the motherboard 2.0.

    See you soon!

  • 280 G1 Micro Tower HP: Chipset driver needed for HP 280 G1 Micro tour Win 7 32 Bit Driver on the HP Sup site does not work

    Driver chipset on the HP support site does not load correctly.  All other drivers will charge properly.    Can someone point me to a chipset driver that is installed correctly?

    Thank you!

    Hello:

    Try the one directly from Intel...

    A 2nd on the left side of the page is the automatic installation file.

    https://Downloadcenter.Intel.com/download/20775/Intel-chipset-device-software-INF-Update-utility-

  • Satellite NB10t-A02C supports wifi Atheros AR9565 chipset

    Hey guys,.

    I'm looking at buying a new NB10t-A02C mainly to work on Linux (Debian). I was hoping someone could confirm that this particular model uses wifi Atheros AR9565 chipset. Apparently, some use an Intel wifi chipset but I can't confirm one way or the other regarding this model of the Australian market.

    Thank you very much for your time & help.

    Mez

    Is the complete model of the Satellite NB10t-A02C number: PU141A-02C03V
    Google gives a few hits about this model of Toshiba Satellite NB10t and it seems that this unit was equipped with the module WiFi Atheros (not Intel).

  • Cannot install utilities chipset on Portege R500-11Z

    Hello.
    I have updated my OS to Windows 7, but something wrong with the installation of utilities chipset, so usb connectors, and the fingerprint identification system, will not function properly.
    I downloaded the drivers Intel too, but the error persists.

    Could you please help me?

    Thank you very much.

    Stand by.

    You said that you have problems with the USB connectors.
    Do you mean USB ports?
    What s wrong exactly?

    The same question is related to the system of fingerprinting.
    What wrong with fingerprint sensor?

    The Toshiba driver page provides the Intel Chipset v9.1.1.1015 utility
    This driver/software is compatible with the chipsets Intel 945GMS express chipset.

    Also the driver from the Intel page could be installed:
    https://Downloadcenter.Intel.com/Detail_Desc.aspx?DwnldID=18232

    The Zip package contains unique files and this helps you to install the driver through the Device Manager

  • Satellite R830 - walk which chipset?

    I'll buy it. I would like to know if the deepening of the chipset in B2 (with sata 2 BUG) or B3.

    Thank you.

    Hello

    What Satellite R830 want exactly?

    There are different models of R830 market and some Intel HM65 chipset and other Intel QM67 chipset models.

  • Satellite R630 - 12G: Chipset and Bios support hardware virtualization

    No one has tested hardware virtualization with Toshiba Satellite R630 - 12G?

    It work?

    Thank you
    Tom

    Hello

    Laptop supports processor Mobile Intel HM55 Express Chipset and the Intel Core i5 - 450 M processor.

    Virtualization depends on the CPU.
    If the CPU compatible Intel VT virtualization should be possible.

    According to Intel, the Intel Virtualization Technology (VT - x) page is possible
    http://Ark.Intel.com/product.aspx?ID=49022

Maybe you are looking for

  • Lenovo ThinkPad Yoga S240 - Chrome drag-and - drop

    Hello I can't drag & drop in google chrome app, even if I use a split screen. I use google reader for example. I did google a lot on this topic but I never really found an answer except maybe I need to install another version, a desktop version of go

  • HP dvd - r discs

    I have a desktop HP Pavilion a1210n computer.  For DVD discs, I have been using HP dvd - r 16 x 4.7 GB / 120 min.disks for films, I created on my desktop. Most of the time the discs are fine.  However, I have 3 drives that I am almost certain that I

  • Remove labview 2009 without using Add/Remove program

    Hi all I have problem with the removal of LabVIEW 2009. I deleted some folders in the C drive, folder OR. Now I can't start my LabVIEW 2009 and it does not appear in my Add/Remove Programs list. I tried to delete all the folders and files in the C dr

  • Problem with Yahoo mail

    I have a yahoo email accountl.  My Droid will not notify my when I get a new email.  To access my e-mail I need to touch my email app symbol and manually refresh my Inbox to view it, or I need to access it through my browser.  The Motorolla tech said

  • do not sync to pocket for computer information

    Hello I have a Tungsten E2.   I entered contact info and calendar info in my laptop and pressed, but nothing transferred hot sync to my computer.  There is no error message.  It is said complete via HotSync.   I don't know what I'm doing wrong. Help,