P7-1109: start new GPU screen freezes on HP

Similar Questions

• recently, my mac started hanging. the screen freezes and I have to use the power button to turn it off

  recently, my mac started hanging. the screen freezes and I have to use the power button to turn it off

  Run this test and post the results here.

  http://www.etresoft.com/etrecheck

• new GPU CPU RAM Motherborad everything on windows 7 wont boot in to windows at all when I turn on the screen of my power light then goes right (windows error)

  new GPU CPU RAM Motherborad everything on windows 7 does not start in Windows at all when I turn my power on the screen on then turn past directly to (windows error) I hit normal windows startup then goes to blue screen I tried safe mode, safe mode with netowrking, last know good configuretions and it stil goes to blue screen and again once it restarts please help fix this problem some

  Here's my Spece if necessary
  OS-Windows 7 Home Premium 64-bit
  Intel Core i5 processor 3570 k @ 3.40 ghz
  RAM-8 GB
  Graphics Card-MSI Nvidia Geforce 660 TI 2Go ECA
  Motherborad-H77MA G43 (Gen3)
  PSU - XFX Pro 750W Brozne Edition (Real Gamers Easy Rail)
  Hurricane box-Cyberpower (Black ATX) side Pancel Galss with blue lights)
  Monitor-LG W2340 HD 1920 x 1080 60 hz (DVI - D)
  Keyboard-Xtreme Gear (large buttons)
  Mouse-Xtreme Gear
  Here is ok all my spece pc I hope who help im going to call MSI and Cyberpower on this problem also if needed

  If win is an oem version supplied preinstalled on the PC, its coastline to the origonal material.

  If this is a start of commercial version full victory since the win dvd and see if a repair install works

• Whenever I click on Internet Explorer or Google Chrome, they take so much time to start, says "not responding" and the screen freezes.

  * Original title: no response

  Hello

  I run Windows 7.

  Whenever I click on Internet Explorer or Google Chrome they take so long to start up... at least 40 seconds.

  Then the page that I am (say Live.com) says "not responding" and the screen freezes.

  Tried to remove the "cache" etc.

  Lose the will to live.

  Any help is appreciated.

  Thank you.

  (Moved to programs)

  I suggest that you run ADWcleaner.  Also check the modules under the Tools menu.  Security under Options by default.

• After you start a DVD of windows 8, the screen freezes on logo win 8

  Help, please! What is the problem? How does the screen freezes on the logo and I expect a lot of time and nothing else are they displayed? What is the DVD problem? also everytime I press a key is produces a strange high frequency-.-help me please, as my current system is 32-bit win 8.1 that I am trying to install is 64-bit.

  I discovered that the version I downloaded is not bootable on a USB, thx @techwars

• New Welcome screen at the start of the last DC 2014 of Photoshop problem

  I can understand the use of the new Welcome screen in the last update, but it takes 12 seconds to load each time.

  I do not have to wait long to do this, so, how might I turn it off?

  First, you must be a member of creative cloud paid to turn it off.

  Wait for it to load.  After it is loaded, click the news or implementation tab if you're not already there.  Scroll down so that you see the footer.  (Note that the Mac can make it not obvious that you can scroll to the bottom).  You should see a checkbox titled 'don't show welcome screen Again.  Check it, and then close the dialog box.

  Note You can bring it back once again my by selecting the element 'Welcome. '... "in the Help menu.

  Best regards

  Mark VerMurlen

  Adobe engineering

• Screen freezes and blinks after the update to 10.11.6

  Hello!

  I have a Macbook Pro for mid-2007, which has helped a lot, was powerful and as stable as steel. I've never had or known major bugs since I have. Leopard 10.5 aka El Capitan 10.11.5, nothing to notice. The usual Mac you need: solid, stable and fast. I have an IntelCore 2 Duo, 4 GB of RAM, Samsung SSD 840 series, the old Fujitsu HDD for storage and a Nvidia GeForce 8600 M GT graphics chipset.

  But the nightmare started when install the last update of El Capitan: OS 10.11.6. Update was fast enough, just half an hour, and I'm going, with the last update. I was browsing Safari then my screen blinked once, and all that was displayed was frozen, except the mouse I could be moved. 10 seconds or about later, my system of defrost and I could use it. Until less than a minute later, new flashes and freeze again. And he began to be more bizarre than ever: Safari window displaying strange patterns, with little colored squares, bar menus, very noisy. Hard, I rebooted my Macbook Pro, hoped it was just a random bug. But no, it has reproduced, forever and ever, when browsing in Safari. So I decided to switch to Opera web browser just for a test day. And... nothing happened. No bugs, no frost, no flashing screens. I found the source of this Safari bug, so I went to the opera.

  Until yesterday, when you use the Finder to display images using Quicklook. Flashes and the gel. When you are using TweetDeck, same result, flashes & freeze. Even if you use Opera when scrolling too fast: flashes and the screen. When you use presentation and Launchpad. And if this bug to reproduce twice, the display shows a strange patterns, such as Cup-a part of windows, bar menu invisible, etc..

  It's VERY BORING. It is the first time in 8 years of work with Mac OS X, I have experienced this kind of graphic bug. The last time I encounter some bugs graphics but much more discreet, and it's in 2008 with OS 10.5.3, which was not very stable (the next version is much more stable).

  I know this has something to do with the Nvidia driver. The same lines are appearing in the newspapers when the bug happens, like this:

  > 31/07/2016 10:50:47, 000 kernel [0]: NVDA (OpenGL): exception channel! exception type = 0xd = graphic engine (GR error 5) error

  I don't want to hear that this has something to do with the graphic chipset, because before the 10.11.6 updated, I had NO gel or flashes of the screen at all. I had never actually had. And the motherboard has been replaced in 2010 because the chipset was dead.

  So, I don't know what to do. I guess I'll have to wait a few months the 10.11.7 next update, hoping that he can solve the display bug. And I wouldn't be able to install Sierra because... Well, my Macbook Pro is too old, so I'm stuck with El Capitan (but that's another story).

  Thanks in advance if you have any tips that might help.

  It is difficult to say if this is indeed caused by the last update or a (chance) sign is not material. You might be able to work around the problem by installing the gfxCardSatusand forcing your MacBook to use the GPU integrated or discreet, but not automatically switch between them.

• my Windows xp pro computer was working fine, but after five days, when I stat from my computer I could show only the information of the bios on the screen and then the screen freezes

  my Windows xp pro computer worked fine but after five days, when I stat my computer I could show only the bios information on the screen then the screen freezes, then I started ahead of time the computer starts at mode, but once again he the disply frozen. I couldn't start my computer. I have a lot of data in my hard drive. What can I do to start computer or recover my data?

  First run Memtest86 +:
  It runs from a floppy disk or CD and should eliminate or confirm if your one or more of your memory
  sticks are bad or the values of the SPD in the BIOS are correct.
  Let it run for as long as you can: 2,4,6,8 or several hours (at least 3 full passes), if no errors, then your RAM is OK.
  http://www.memtest.org/
  Memtest86 + Guide/How To (use the.) ISO to create a bootable CD)
  http://www.overclockers.com/forums/showthread.php?t=409152

  Test your player - create a Bootable CD:
  Ranging from 5 to 20% (depending on the manufacturing) new hard disks are defective.
  Test your drive with the car manufacture utility.
  If you have a new hard drive Seagate the very next thing would be to download Seagate Seatools
  (bootable CD) and check bad sectors:
  http://www.Seagate.com/WW/v/index.jsp?locale=en-us&name=SeaTools&vgnextoid=720bd20cacdec010VgnVCM100000dd04090aRCRD

  For Western Digital readers to download the .iso from WdDiag file: http://support.wdc.com/product/download.asp?groupid=611&sid=30&lang=en

  Samsung Estool: http://www.samsung.com/global/business/hdd/support/utilities/ES_Tool.html
  Samsung Disk Manager software: http://www.samsung.com/Products/HardDiskDrive/utilities/shdiag.htm
  Hitachi Drive Fitness Test Software: http://www.hgst.com/hdd/support/download.htm#DFT
  Diagnostic tool available for use by customers who feel their Toshiba brand Fujitsu hard drive:
  http://SDD.Toshiba.com/main.aspx?path=ServicesandSupport/WarrantySupport/SoftwareUtilities
  Notice of suport Fujitsu disk utility: http://www.fujitsu.com/us/services/computing/storage/hdd/
  Toshiba CD bootable: (BACK Diagnostic Tool version 7.0 for IDE/ATA/SATA hard disks)
  http://SDD.Toshiba.com/main.aspx?path=ServicesSupport/FujitsuDrivesUSandCanada/SoftwareUtilities#diagnostic

  J W Stuart: http://www.pagestart.com

• Clip 2 GB screen freezes on refresh database

  Hello

  I bought a new clip 2 GB a day ago. Have copied songs in the folder music, I removed the device safely, and he showed me the refresh database screen.

  However, after about 80% finished, the screen freezes and doesn't answer since. I left my clip on since then.

  Please help me solve this problem.

  (A very sad Sansa customer.)

  There is probably a particular file that is causeing the problem.

  New firmware has improved the handling of these files, if you want to upgrade to the latest.

  Press the power button for 20 seconds until the unit turns off.

  Then, connect the device directly to the computer without it turned on, the device upwards will power.

  You can access the content and start to remove the folders to find the file that causes the problem.

  Or,

  You can format the unit and then to apply the firmware and transferred from scratch.

• Computer screen freezes after inactivity

  I recently did a free my Norton anti-virus update to the new version 2011. After this update my computer screen freezes like 1 or 2 times a day. It occurs normally after I put mode "Eve" and go back to using it. After about 15 to 30 seconds, it will freeze sometimes.

  I don't know if it's related but I got a DEP Data Execution Prevention, pop up, but not when the screen froze. I performed a complete analysis of the system of Norton and not detected no viruses.

  I wonder if this new version of Norton has problems with windows? I use my computer for e-mail and the Internet. Do not download music, games ect...

  Any help would be appreciated.

  On your download Norton: I had similar problems and discovered how to do a clean install by getting rid of that most completely in the control panel and task bar completely so we start with the most recent. If you do not buy on line and using the disk, Norton technicians will likely send e-mail instructions since it's their program.  But read on some similar experiences I've had, it might help you.

  I finally got the taskbar, moved to the bottom of the screen, but in the meantime, I downloaded a software called ParetoLogic who claimed that he could fix the taskbar, but he did all the scans and has not set something on the taskbar, so I deleted and kept following the instructions in the task bar and got moved from the task bar.  Then I uninstalled the software called ParetoLogic, my office has begun to gel.  I have to shut down the computer manually, so I contacted the technician on their site and they sent instructions to fetch the menus of tasks that were set to run and the record, but when I finally found the tasks, I couldn't delete them.  I tried to close the Task Manager and he said that I could not close file until all dialog boxes are closed, and I could not find how to close the dialog boxes.  I do not know how to find it after searching for the bar of tasks and answers questions, so I had to click on restart and shut down everything, so I probably lost some information on the way.  I had a computer to lock my CD drive there are several antivirus and anti spyware software, making a few years I used McAfee more Att security program free that they have downloaded with my DSL internet. I didn't know until you have to do a clean uninstall before you try to download a newer version. The control panel will not remove or uninstall all of a program, there are always parts of it, still running in the system, and that's what happens to me today, so, maybe if clean you the old version first, then do a clean with the more recent, install which will probably do.

• Computer HPp6203 of desktop screen freezes randomly

  Original title: windows 7 freeze

  I have a high HPp6203 desktop screen freezes at random no program special time frame or action. Unable to move anything or courier. Just before that happens blue circle appears next to Messenger then it freezes. No new software has been installed. Start button / Stop button to clear. Works fine in safe mode. He had already done once before and I restored it at the earlier time and it changed but now it won't let me restore uniquement3 days before and always an error if the restoration is never completed.  Thank you Gary

  Hi G Conrad, j.

  Thanks for posting your query on the Microsoft Community.

  I would appreciate it if you could provide the error message to better support on the issue. In addition, I would like you to answer the following questions to refine the question.

  • You did it any significant hardware or change software on the computer before this problem?
  • You are able to use the system anyway after the system hangs at startup?

  There are a few reasons your computer might hang, freeze, or crash. So I would say, you can remove the external devices except the mouse and keyboard, try the following steps and check if the problem persists.

  Method 1:

  Step 1: Try to start your system in a State of services necessary to the operation and a minimum set of drivers enabled, called Safe Mode.
  Start your computer in safe mode

  Step 2: If the system works fine in safe mode, try to clean the system startup:

  How to perform a clean boot in Windows

  Note: See "how to reset the computer to start normally after a boot minimum troubleshooting" to prepare the computer to start as usual after a repair.

  If method 1 does not work, see the steps in the following link and check if they are useful.

  8.1 Windows, Windows 8 or Windows 7 hangs or freezes

  Disclaimer : The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

• Windows 7 64-bit random screen freezes why

  My windows 7 64-bit OS has been working fine since August 2010, but since April 11, 2011 the screen freezes intermittent and do a reset to restart my PC

  I also had the error message GfxUI not working not in the same time but corrected this by disabling the Microsoft.NET Framework 3.5.1 and then reactivation

  Hello

  References to Vista also apply to Windows 7.

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Try these to erase corruption and missing/damaged file system repair or replacement.

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or
  Windows 7
  http://support.Microsoft.com/kb/929135

  Use advanced tools to solve performance problems in Windows 7
  http://www.howtogeek.com/HOWTO/6152/use-advanced-tools-to-troubleshoot-performance-problems-in-Windows-7/

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/default.aspx/GP/slow_windows_performance?p=1

  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to change, add or remove startup programs in Windows 7
  http://www.SevenForums.com/tutorials/1401-startup-programs-change.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Think about it an absolute must - manually update your drivers.

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers under Windows 7 (updated drivers manually using the methods above
  It is preferable to ensure that the latest drivers from the manufacturer of system and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  I hope this helps.

• mini iPad screen freezes and close Web pages

  Recently, my iPod mini has been the screen freezes while on various Internet sites, and I was also watching a Web site when the Web page is suddenly closed and I am struck to the homescreen (which displays the grid of the app).  When the screen freezes, I have to do a hard reboot because the iPod does respond to any stimuli.  Freeze the screen became much worse after the 9.3.3 iOS and iOS 9.3.4, closing only started after that, the newest Web page updated.

  Does anyone else have this problem?

  Try resetting Safari. Close Safari completely from the window of the selector app by double clicking the Home button and slide up the preview pane of Safari until it disappears from the display. Then go to settings > Safari > clear the history and data from the Web site. Then restart the unit.

• After the upgrade to IOS 9.3.2 my screen freezes

  After upgrading my 6 + iOS 9.3.2 my screen freezes and does not respond.  Currently running applications continue to run, but I can't interact with them.  If I go back to the phone later, the problem disappeared, but I don't know how long it took.  Then the problem comes back.  Even after a factory reset, with none of the applications running, my screen will freeze.

  scottfromlucas wrote:

  After upgrading my 6 + iOS 9.3.2 my screen freezes and does not respond.  Currently running applications continue to run, but I can't interact with them.  If I go back to the phone later, the problem disappeared, but I don't know how long it took.  Then the problem comes back.  Even after a factory reset, with none of the applications running, my screen will freeze.

  When you say factory reset, did your restore as new or from a backup?

  If restore you to the new and the problem persists, I make an appointment with the genius bar and take your phone to Apple and looked at him.

• Satellite M70 164 - screen freezes and goes black, overheating

  Hello world! :)

  Recently my Satellite m70-164 started to freeze after only a few minutes of work. The picture on the screen freezes, and a few seconds later, it becomes completely black.
  The computer doesn't even have time to warm up, and it's not stop... It's just the screen that freezes and becomes so black. I have to reset the computer by pressing the power button. (I write from another computer).

  I noticed that working time reduced whenever I have reset the computer and after some time it freezes even though I am in the BIOS settings, so I don't think it's an OS problem.
  Even if the computer does not have time to warm up, this suggests it might be a heat problem.
  So I tried pointing a fan this is low (a big, like the ones we use in the summer), and it works without problem!

  With the fan facing these, I reinstalled Windows - so no Virus.
  Laptop fan * not * continue to operate as it is overheating.
  The fan runs and it is not clogged as I've cleaned.

  So if anyone has the same problem, or ideas, please respond!
  (And sorry for my English)
  Thanks in advance! : D

  Hey Buddy,

  I agree with you. In this case, even in the BIOS, that it has nothing to do with Windows or a Virus. In this case, it seems to be a hardware malfunction

  But before contacting an authorized service provider to diagnose what part is the cause, clean your laptop using a jet of compressed air. This should be done from time to time (every 4 months) and, therefore, it of not necessary to disassemble the laptop.

  Check this box!