Pachting Oracle 11.1 under Windows 2008 32 bit

Similar Questions

• Performance problems on Oracle 11 G with Windows 2008 64 bit.

  Hello world
  
  I noticed that our database is going bad and low every week. My server has 16 GB of RAM and 10 GB are dedicated to the database Oracle, it is a 11.2.0.1 with Windows 2008 R2 SP1 64 bit. I would like to know according to the values of the movement following you guys recommend to adjust in the init.ora:
  
  ORCL.__db_cache_size = 5402263552
  ORCL.__java_pool_size = 33554432
  ORCL.__large_pool_size = 33554432
  ORCL.__pga_aggregate_target = 3657433088
  ORCL.__sga_target = 6878658560
  ORCL.__shared_io_pool_size = 0
  ORCL.__shared_pool_size = 1308622848
  ORCL.__streams_pool_size = 33554432
  
  * .memory_target = 10511974400
  * .open_cursors = 5000
  
  * .optimizer_mode = "RULE".
  * runoff = 300
  
  According to the target memory on how values can be increased the process, pga_agregate_target, etc.
  
  We also have problems with the bug Bug 9593134 "connection to Oracle 11 g are slow and can take anywhere from 10 seconds to 2 minutes." there is a difficulty on linux by removing dns names on this subject, but someone has experience on windows platforms?
  
  Thanks to all and sorry for my English.
  
  Kind regards.
  
  Arturo.

  Concerning the long connection times, have you tried to use the network (such as Wireshark) packet capture software to determine that the client computer when a connection attempt is initiated?

  The Oracle database time can help the model statistics and wait events extensive system you diagnose performance problems related to poor (you should not only look at the statistics, but rather capture the current values, wait a while, statistics capture again and compare the evolution of the values of the statistics). A statspack report may also help - but a trace 10046 to level 8 or 12 is more appropriate if you are able to identify a few sessions that have performance problems.

  I claim not just blindly changing the settings, even if I'm curious about:
  * Why the session level setting OPEN_CURSORS is set to 5000 - you expect a single session to hold cursors open 5,000?
  * Why do you use the obsolete RULE based optimizer?
  * Why the MEMORY_TARGET parameter is used when the target SGA_TARGET and PGA_AGGREGATE are specified?

  Charles Hooper
  http://hoopercharles.WordPress.com/
  IT Manager/Oracle DBA
  K & M-making Machine, Inc.

• Failed to open oracle functions after R12 installation on windows 2008 64 bit

  Hi guys
  I installed oracle R12.1.1 on windows server 2008 R2 64-bit, then the application opens but all forms of oracle functions cannot open, the message appear frm-92101, I try the solutions in the net, but no effect and I get another windows which and this message appears when trying to open an another oracle functions
  ""
  program currently running on this computer is attempting to display a message, then
  title of the message:
  E:\oracle\VIS\apps\tech_st\10.1.3\appsutil\jdk\bin\java '-serv ".
  
  
  This problem come when a program is not completely compatible with windows
  ""
  This message when you start windows too, but the path of java inside files of oracle applications, please help me if oracle r12.1.1 compatible with win 2008 64 bit or not?

  I installed oracle R12.1.1 on windows server 2008 R2 64-bit, then the application opens but all forms of oracle functions cannot open, the message appear frm-92101, I try the solutions in the net, but no effect and I get another windows which and this message appears when trying to open an another oracle functions

  Direct installation of R12 on Windows 2008 64 bit is not supported. You install it on a Windows 32-bit operating system, and then migrate to Windows 64 - bit.

  Oracle E-Business Suite installation and upgrade version Notes 12 (12.1.1) for Microsoft Windows Server (32-bit) [ID 761567.1]
  Migration Oracle E-Business Suite R12 to Microsoft Windows Server 2008 R2 [ID 1188535.1]

  Thank you
  Hussein

• Can't seem to find the native oracle 32-bit cleint for a Windows 2008 64 bit op

  Hello
  
  We have a Windows 2008 (64-bit) server and that you have installed oracle 64-bit client out there.
  
  Have a third-party application which is usggesting also need a client native 32-bit oracle.
  
  Peeked on otn but can't seem to find. For 64-bit operating systems can't see oracle 64-bit client.
  
  Ideas/links appreciated.
  
  Thank you

  user5716448 wrote:
  that is, no client 32-bit for the client operating system 32 bit and 32-bit operation for 64-bit operating system?

  There is no client 32-bit for the 64 bit OS, use standard 32-bit client on 64-bit operating system.

• Is Oracle 10g compatible with windows 2008?

  Hi all
  
  Is Oracle 10g compatible with windows 2008?
  
  What are the oracle 10g of the OS compatible with? It is compatible with the VMware environment too?
  
  Concerning
  Arun

  user12273523 wrote:
  Hi all

  Is Oracle 10g compatible with windows 2008?

  Yes

  What are the oracle 10g of the OS compatible with? It is compatible with the VMware environment too?

  Please check

  http://www.Oracle.com/technology/software/products/database/index.html

  Concerning
  Rajesh

• Siebel 8.1.1.11 on Windows 2008 32-bit

  Dear all,

  We intend to improve 8.1.1.5 8.1.1.11 and currently on Windows 2008 32-bit.

  Siebel 8.1.1.11 will work on Windows 2008 32-bit for HER, SWSE, etc.?

  The "Certifications" tab does not have Microsoft Windows 2008 32 bit as an operating system supported. This means that we cannot spend our 8.1.1.5 existing on Windows 2008 32-bit to 8.1.1.11 unless we move to Windows 2008 64-bit?

  But "Siebel Support for Windows 2008 () ". DOC ID 781428.1 "( )" indicates that Windows 2008 32-bit is supported for 8.1.1 or.

  Thank you

  Lino

  Hello Lino,

  Thank you for using Oracle communities.

  Regarding your query on 8.1.1.11 with Windows 2008 32 bit. You can always 8.1 patch1.11 atop 8.1.1.5 and application will work fine.

  Problem here is that Windows 2008 (32-bit) is end of life (EOL) of microsoft. So Siebel will always work for Siebel 8.1.1.10 and 8.1.1.11 (including Patchsets) Siebel and Oracle supported on a technical level, but we don't plan to list the versions of Windows on My Oracle Support certify once can no longer get support from Microsoft.

  Visitors can run Siebel 8.1.1.x on Windows 2008, 32-bit, but we dealt only with issues related to the Siebel code and can not help in Microsoft problems, since we are unable to get help.

  So since you are running on W2008 32-bit 8.1.1.x pre-8.1.1.11 version then you might well spend Siebel to 8.1.1.11 and stay on the subject.  (As it was in the old SRSP will who honor us)

  But of course, you will need to plan to move forward on W2008 R2 version.  This version is ONLY for 64-bit as matrices a with R1 W2008 32-bit line.

  Note: there is a hard stop on the end of this year with the Innovation Pack 2014 (aka Siebel 8.1.1.14): as we will be upgrading all the compilers and relying on Win 2008 R2, we can support 64 bit OS only at this time (because 32-bit OS will not exist for this and future patches). However, the Siebel application will be a 32-bit application.

  I hope it helps.

  Best regards

  Chetan

• Installation database 11.2.0.2 GR 11, 2 under Windows 7 32 bit version

  Hello world
  
  I want to install 11 GR 2 version 11.2.0.2 database under Windows 7 32 bit.
  I searched the download.oracle.com but I wasn't able to findout good database compatible with windows 7. They had 11gEX db but I want to install simple 11 GR 2.
  Help me please download and configure the database on windows 7 32-bit.
  
  Thanks in advance.
  NISH

  Hello Nish;

  Please see Microsoft Windows 7 certified to install/run Oracle database server is? [952302.1 ID]

  He will answer ;)

  Respect of
  HELIOS

• Break the BI publisher on Windows 2008 64-bit installation

  Hello, everyone
  
  I need sense of simple installation on BI Publisher version 11.1.1.3 on Windows 2008 64 bit server to Oracle database 11g and Apex 4.0. The more I read the installation, I'm confused. Document ID: E10539-01 is very confusing to me. I'm sorry. The 32-bit with BI Publisher version 10.1.3.4.1 server is much easier to implement.
  
  Thanks in advance.
  
  Tigerwapa

  BI Publisher implementation is another story, but I think that the instructions for setting the version 4.0 of the APEX is identical to the version 3.x... You point apex on the port that you have installed BI Publisher on and the servlet that transmits information between APEX & BI Publisher...

  Thank you

  Tony Miller
  Webster, TX

  When you have enough clowns, you have a circus.

  If you answer this question, please mark the thread as closed and give points where won...

• Re: Toshiba Store Alu 3.5 "1 TB HARD drive works only with Windows 2008 64-bit

  Just bought this as a backup device for Small Business Server 2008 running on Windows 2008 64-bit. However it does not? Are there drivers anywhere for this or it is simply not supported and I need to buy an alternative solution?

  Plugged into my laptop Windows 7 64 bit and no problems.

  Someone else had the same problem?

  Hello

  Unfortunately, there is no other software by download.
  I checked the driver page Toshiba in the Options area but didn't find anything

  AFAIK it of a plug & play HARD drive if you n t need any software to recognize the HARD drive

  There may be a password.
  Try this:
  Connect your HARD drive to the computer when the HARD drive is working
  Select the CD drive with your browser (password)
  Run the ONSPCLCK.exe
  Select 'Options '.
  Select "Disable security password"
  Enter your current password
  Unplug the HARD drive
  connect the HARD drive

  Now, it will work, but with no password protection. Perhaps it would work

• OfficeJet 4630: anyone can print reliaby with Officejet 4630 under Windows 10 (64-bit) using wireless?

  I have a couple of PCs.

  Both run Windows 10 (64-bit).

  An upgrade from 8.1 64-bit. The other is Windows 7 ultimate (64 bit).

  I bought Officejet 4630 at the end of September.

  So far I have not been able to print from a reliable PC at all.

  Sometimes maybe a page can be printed, but if I try the next page. The print queue seems to get hung.

  Worse, on a PC (Win7 64-bit upgrade), I can not connect with USB at all.

  Immediately after installing the driver, it fails to "print test page"? What gives?

  (I have not tried the USB connection with other PCs through the situation. He's far away and so connected via radio.)

  Strangely enough, it's the HP printing diagnostic seems to work perfectly. It prints the test page.

  But, after a week of Calvary and see how works the test via the web interface, I now have the feeling that

  HP diagnostics program simply sends a command that causes the printer to print a test page to itself, and not

  through the path of ordinary driver through what print ordinary application data. It can be found.

  Due to the failure of printing with a USB connection, I asked local HP support for replacement t

  hinking that unit was bad.

  However, the replacement arrived today, but the same symptom!

  Agah.

  I'm afraid that HP screwed royally here, but worse yet, it doesn't seem to be aware of the problem in the light of some

  Reviews of so-called unconscious support people!

  If someone has this printer works reliably on windows 10 64 - bit

  Please let us know what you were doing. (although the chance that someone with perfect condition watch Forum HP may be low. You are posting and I read this forum because of problems...)

  -How you installed the driver (from which source)

  -which tweaks you did.

  I tried to install the OJ4630_198 and the driver is updated to Windows.

  Windows Update seems to be a little better, but still stuck print jobs are seen after a few

  tests and unnecessary. (Initially because of this apparent initial success, I thought that the problem was limited

  so a PC, but now I think that both PC evenly suffer failure).

  So far, I tried to change the PORT to a fixed TCP/IP address port (which sometimes seems to be feasible: sometimes not.) I was not able to understand why. Maybe the difference between HP driver or Windows update)

  Sometimes after the Ministry of port, the first printing time works, but the

  next print does not work.  It remains in the queue.

  This has been driving me crazy...

  If person not steps forward with the installation of reliable work (10, 64-bit windows), I think I'm going for it back to HP, although the initial cooling period has expired from a legal point of view, I'll see if I can convince the support contact.

  I bought HP printers only over the years. They lasted well and worked like a charm, and the black ink was really nice.

  After that, I can't printers recomment the HP to my friends more.

  TIA

  [Driver in Deskjet 6980 works for printing with capricious 4630]

  Under improved Windows 10, too!

  I checked it after upgrading my PC under Windows 7 64-bit of Windows 10.

  After a few false starts, however, some programs are missing 'Dropbox' "Norton Internet Security" (?)

  sort: I downloaded the binary Moose and once I let the Installer run again, they picked up the proper

  configuration of the previous installation and started running.

  I needed to tweak 'Register windows' but when I tried to run 'regedit' something 'Extended attributes are '.

  inconsistent"and any program that requires administrative privilege would begin: maybe Dropbox and Norton Internet

  Security has failed because of this issue. Surprisingly, I could fix this by restoring the default Windows theme.

  (In my previous attempt to update, I put it to something Bing, a jazzy theme on the Japanese season, or something.

  Affected and surprising finished showing 'Extended attributes are incompatible' (or you may need to

  reset the sound theme as well. YMMV.) I raised this strange questions after the upgrade just in case

  These problems are related to the Deskjet 6980 under Windows 7 64-bit driver installation before upgrading to Windows 10.

  Somehow, however, the previous installation of the driver instance 4630 seems to have disappeared (maybe I deleted it before

  the upgrade, I don't know.) So I install driver 4630 for * SCANNING * purposes only.

  FAX can wait a while.

  Finally, some working environment for Officejet 4630 with using the Deskjet 6980 driver for printing

  is being created.

  TIA

• CTRL-Alt-Del does not bring upward management tasks under Windows XP 32-bit

  CTRL-Alt-Del brings up the Manager of tasks under Windows XP 32-bit.  What should I do?

  The other post:

  It's as simple as that.  What should I do?

  Hello

  Were there any changes made on the computer before the show?

  I suggest you to return the item and set up the computer to use the Welcome screen and check if it helps:

  To turn the Welcome screen on or off

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/ua_logon_at_welcome_page_w.mspx?mfr=true

  Let us know if it helps.

• Photosmart 8450: Does the Photosmart 8450 under Windows 7 64-bit card reader work?

  Under Windows XP 32 bit card on my Photosmart 8450 network reader appeared as a network drive in Windows Explorer. Now that I've migrated to Windows 7 64 bit I get no network drive and if I put an SD card in the drive I get a 'map' mistake of access on the display panel. It is to be expected with the built-in drivers for Win 7? If so, is there no work around?

  Hello

  Thanks for the reply and sorry for not getting back sooner. Been strongly concerned about the end.

  I just find the solution to both problems.

  1. the card reader does not accept SD - HC cards. When I put an ordinary SD it worked fine.

  2 network drive mapping could not find the printer, even if I can print to it without any problems. I had recently also changed the router and discovered that the IP assigned to the printer was within the range of IP addresses assigned by DHCP. Changed static address to + 1.  Still did not work; posted in printer address was unidentifiable. Sitched printer, pulled ethernet cable outlet, turned on, plugged the ethernet cable. Bingo! The network drive works now.

• Explorer stopped working under Windows 7 64-bit

  SOS

  Explorer has stopped working (Windows 7 64 bit TouchSmart 520), it crashes from time to time and the rail of the screen and I can not do or move with the mouse until ' in that it restarts Explorer nothing. And PC and a slow opening nearly two minutes to get a home, then 50 seconds pour office to the Windows Get. Thanks reloaded

  sincerely

  ***************************************************************************************************************************************

  Hello

  Explorer of the Nations United continues to work (under Windows 7 64-bit TouchSmart 520) it blocks from time to time and tout the screen and block I can so do or move with the laetitia until it restarts Explorer.

  And the pc and lent a L'Ouverture almost two minutes pour get one THEN welcome 50 second pay the arriving to the Windows desktop.

  Thanks for help not CDL

  Double post / Double post

• Dependencies Microsoft MSVC 1.52 under Windows 7 64-bit

  Is it possible that I can install and run MSVC 1.52 under Windows 7 64-bit? I need to run this application to support a number of 16-bit DOS applications and I get tired carrying two laptops in the world.

  He ran under Windows 7/64 PRO XP mode or is the problem more to do with the dilated not supporting 64-bit not 16-bit.

  Thank you

  64-bit Windows does not support 16-bit applications natively.

  Assuming the program works under Windows XP, you can try XP mode since it will run as the 32-bit Version of Windows XP.

• Former installation problem program under Windows 7 64-bit

  I installed the 64-bit Windows 7, but I need to run some old software, for which I have a CD. (Actually I think it is 16-bit. Well, I know it's a dinosaur, but this is my situation.) Naturally, setup.exe is also 16-bit (perhaps 32 bits, but I doubt it). There is a shortcut to setup.exe on my desk, by double-clicking on it, I get this message:

  The version of this file is not compatible with the version of Windows you are using. Check your computer's system information to see if you need a x 86 (32 bit) or x 64 (64-bit) version of the program and then contact the software publisher.

  He ran very well under Windows XP 32-bit, and I don't remember doing something special for 16 bit then; I know that much. (I'm sure I'd remember something special like that, if I had). Microsoft program compatibility issues resolution isn't going anywhere.

  How do I enter a 32-bit emulator environment and double-click the shortcut (or setup.exe itself) from there?

  Separated from the:

  http://answers.Microsoft.com/en-us/IE/Forum/IE8-windows_other/64-bit-and-32-bit/c2d75382-DB03-4674-B62D-9ca8a0331b34

  64 bit W7 run 16-bit programs.

  32-bit W7 can run older 16-bit programs (a little) more

  See http://windows.microsoft.com/en-us/windows/32-bit-and-64-bit-windows#1TC=windows-7 and http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_programs/how-can-i-run-16-bit-programs-in-windows-7-64-bit/22b921f5-0b71-4ba1-8567-2bb86a1b604e for additional information.

  If you have an eligible version of W7, you may be able to get the program running in XPMode or install Virtual Box and if you run an old copy of XP or W7 32-bit (assuming it's free with a free license, etc.) in that.

  Or maybe make a system dual-boot W732 (or XP) and W764.

  If it is a DOS program rather than an old Windows program, it can run into something like DOSBOX