SWF is MIA on a field, but not the other?

Similar Questions

• My Nano Gen 7 is recognized on a single computer, but not the other

  My Nano Gen 7 is recognized on a single computer, but not the other.  I went through all the troubleshooting tips.  Different cables, try all USB ports, uninstall/reinstall itunes, etc.  I have itunes more up-to-date software.  I was able to connect the ipod to my backup computer and confirmed that I also have the software more up-to-date on the ipod.  Since I am able to connect to it, I also did a factory reset the iPod, but it still wouldn't connect to my main computer.  Nothing has worked.  I think there must be a setting on my pc.  I use the latest version of windows 10.  Any suggestions are welcome.  Thank you

  I just bought an Ipod Nano 7th generation and itunes does not recognize it.  Had by all the standard troubleshooting (uninstall/install itunes, etc.) and no luck.  My PC recognizes, he calls the 'nano' but acknowledges as a USB mass storage device.  I spoke to a support person from apple for more than an hour to help me troubleshoot it, finally they just said it was a windows problem, and I need to contact Microsoft.

• Just got 2 of SE. Weather app works on one but not the other.

  Just got 2 of SE. Weather app works on one but not the other. Ideas?

  Drosea,

  Define/describe does not.

  What's the weather App?

  

• Flash Player crashes a pc but not the other

  I have two PCs each running xp sp3.  Players of Flash in Chrome and Firefox crash one of them, but not the other.  Obviously something is different between the two computers, but how can I evenbegin to understand what he.  I've seen a lot of posts on Flash crash peoples computers and no satisfactory answers to my problem.  Thanks for responding.

  First thing to try on the computer crash is to disable hardware acceleration (http://forums.adobe.com/thread/891337).

  If this resolves the problem, then you should update the drivers for your graphics card (and re-enable hardware acceleration).

• Windows can't access\\ when you go to windows xp, but runs between xp to vista and 7, but not the other dirrection

  Cannot access xp vista or 7 but works the other way around. Can ping all machines and see all the machines in my network places. Help! Thanks I JUST TRIED FOR THE TWO LAST DAYS

  No, this wasn't it. But I found it. When I was checking the user name user accounts is plural on the XP machine and not on other machines.  So I renamed the discovered XP username is a no. Created a new user name that match the others to check out and everything works. now, I just copy the profile of the plural name account to the new account. I want to thank everyone for their help.

• Audio in a timeline yet, but not the other?

  Hello

  I am trying to solve a problem in a timeline yet for Blu - ray with a MPEG2 and AC3 file.  It's weird because with the exact specifications of the same file for the video and audio, I'm able to hear the audio from the test project calendar (short term), but not the project calendar full length (about an hour and a half in duration).

  I'm burning a disk to verify that audio is just not there, rather than a problem reading with the project any longer, but can anyone suggest what may be broken here?  Again, the two projects seem to be identical in the parameters and specifications file for the video and audio, only the duration of a (work) is shorter than the other (does not).

  The audio file has been posted outside still like audio playback.

  Thank you for all what thoughts - what someone might have here.  BTW, the project has no menu screen.  That's a 'read only' Blu - ray disc

  Mtbakerstu

  That shows the status of transcoding of comics for each importing audio?

  Confirm that it is import and not dynamic link.

  How do you know that the file specifications are identical?

• A signer can refuse to sign a document, a field, but sign the others?

  I send several pages for approval. Is there a way that signatory can refuse to sign one of the pages, but sign the rest?

  Thank you

  Hi josha311167,

  Would like to inform you that if Signature fields are placed in the document & they are not defined as required fields then in this case signatory can jump to any page & placing signatures in fields on other pages.

  But if fields are required in order to place the signature, then the signatory cannot refuse.

  Kind regards

  Christian

• Get a preview of image files but not the other files

  In the Finder (or an alternative file manager) is there a way to show previews of image files, but not for the other files?

  With the image files, it will display a preview. With other types of file, a preview is useless and its best to see a standard icon indicating the file type.

  Any decent file on all Linux distributions browser lets you choose Preview vs standard icon based on case by case basis depending on the file type. I can't see how to proceed in the Finder (or the various alternatives as TotalFinder). How can I me Finder for this?

  The thumbnails, you mean? I don't think that there is a 'decent' solution for OS x. But then again, I don't know everything.

  https://www.Apple.com/feedback/MacOSX.html

• Build the name of guard of the table of the last element, but not the others. Workaround solution?

  Hello

  Sorry if this has been posted before, I did the search first, but can't find anything.

  Problem is that I have two configurations which are identical and must be ordered by a single vi. Given that they are the same, they are configured with the same sets of parameters so I decided to create a cluster of these and then build an array of clusters. In this way I need to use only a thread and if I need a given parameter I can get it easily from here (or so I thought) and also because I need to see if anything changes I can compare a thread instead of each of the parameters.

  The gui has the list of parameters, then in the block diagram I group them appropiately, using "Bundle name" and then each bundle in a table by using "build the table. Problem is when I have the index in the array for the first place of the configuration and usage to unbundle the parameters I need, using "ungroup by name" (although if I use "Unbundle" the same thing happens) and lo and behol, the output names come from the configuration of the second, not the first.

  Here's the curious thing, though, even if the names are all wrong, that the values are correct. I could live with that, but it's more boring it will be another very difficult user to understand the schema more this is just a proof of principle to test with two, eventually there will be eight or more and who's going to get really confusing.

  Is there a way to get around this? Even if it is to change the names after unbundling.

  Check the attached vi to see what I mean.

  I think you forget an important point on the tables.  The only thing that may be different between each element of a table is its value.  The elements in the array must all share the same properties.  This would therefore include the names of the different elements that make up the cluster that is a table element.

  It seems that the last group that builds in the table is the one that defines the names of the items that are in the element of the cluster.  You must give all elements of the array with the same name within the cluster.  Or use a cluster of clusters rather than a table of cluster to create your data structure.

• Why: print from a user account, but not the other?

  On a computer, we have two user account: an admin mastering (Bev), the other without (BevsGuest).  Note that this is not 'the' guest account.

  We have no printing problem on behalf of Bev.  But we cannot print from the BevsGuest account.  Sorry, but I forgot the error message we get.  But we receive the error of several applications - Excel, Word, Google Maps, etc.

  This who should I seek to explain the problem?

  I'm sure that's enough information for someone to propose a specific solution.  And I cannot possibly answer follow-up questions because I'm away from the computer at 400 miles at present.

  I'm looking for simply advice.  I'm not familiar enough with the Windows o/s to find out how this could happen.

  My WAG is: it's a permissions problem.  But if this is the case, I don't know where to look for the permissions property, which may be the cause of root, let alone how to fix it.

  The problem started a few times in a few months; He worked many years.  I can't say exactly when the problem started, or what has changed in the meantime, because: (1) I use the computer only every few months. and (2) someone else maintains the computer, for example to install Windows updates.  Not to say that this person could have; but usually it is very minimal.

  The computer is located in a private residence, not not part of a corporate network.  Is there any other computers.  The printer is wired, not wireless.

  I could try to roll back to a system restore point.  But it would be a shot in the water, and I'd rather make minimal changes.

  Hello

  ·         Who is the manufacturer of the printer and what is the model?

  I suggest to create a new user account and check if you are able to print from this account or not.

  How to create and configure user accounts in Windows XP

  http://support.Microsoft.com/kb/279783

• My Wired internet connection works on a computer, but not the other.

  I have a rope Ethernet connecting my cable modem to my laptop. When I plugged it in, it immediately connected my laptop to the internet. I took this same chord and plugged into my office. It connects, but I get a 'local only' connection and cannot access the internet. I tried all suggestions from windows to solve the problem. I reinstalled my network card. I played with all the internet options in Control Panel. How to make this work? It is clearly not the modem or the cable because it works on my laptop.

  I am running vista on my desktop.

  Hello

  Is that your desktop is configured to obtain an IP address from the DHCP server? Open the local area connection properties in your office and check the properties of the Protocol ' TCp/Ipv4. Be sure that this radio button for "obtain an IP address automatically" is selected.

  Thank you

  Girish

• How to activate the faults COMMITTED to an internal SATA hard drive, but not the other, on Vista Home Premium 32-bit?

  I have a set of 17-inch laptop 2008 which contains two hard drive bays internal, purchased in June.  It came with a single hard drive (traditional spinning disc).  It is running Service Pack 2, Windows Vista Home Premium 32-bit.

  My SATA controller is an Intel 82801GBM/GHM (ICH7-M family); I think it's a first-generation SATA controller (1.5 Gbps).

  I received recently a 160 GB Intel X - 25 M SSD (second generation SATA, but it is fully compatible with the first generation controllers, without additional or jumpers configuration) as a gift from my wife.  I removed my first hard drive completely, installed the SSD in the main Bay and installed Windows, drivers and the Intel SSD utility.  I then reinstalled my HDD original in the second span, completely wiped and reformatted it as a partition; It currently contains my music and other multimedia files.

  The utility Intel SSD tells me I should activate DIPM for my SSD as opposed to HIPM.  This seems to take a bit of tinkering to make Vista, and my situation is further complicated by the presence of my HARD drive (original) secondary, which prefer to use HIPM.

  I read the article on the Microsoft Web site on editing the registry to activate the misconduct, and it's something I would feel comfortable doing. However, I don't want my SSD to use DIPM, my HARD drive is expected to continue to use HIPM, and I was afraid that the proposed fix would allow the misconduct for all readers.

  Could someone let me know how I can activate DIPM for my SSD while continuing to use HIPM to my HARD drive, I'd be very grateful.

  EDIT: My Maintenance of SSD utility said simply that the State of the settings DIPM/HIPM "could not be determined." if Vista automatically selects the correct setting and the SSD utility does not just understand that, which makes my life a lot easier. but it would be nice to know for sure, so I can forget it all (if Vista already defined for me) or change the setting (if Vista did not automatically choose food appropriate for each disk management mode).

  You will need two SATA controllers: both on board or an edge and the other on PCI - E.

  Configure one who does not need TRIM/DIPM (do not use a SSD) as non-AHCI (compatible IDE/ATA-6) in the BIOS and the other (where TRIM/DIPM will be used) as AHCI.

  Connect the drive to which you DIPM AHCI controller. See http://www.abxzone.com/forums/f155/tip-how-enable-dipm-ssds-windows-120968.html for more information.

• C6350 printing from a laptop, but not the other

  Hi, I have a new HP Photosmart C6350 which was working fine until today. I connected via the network from my wireless for two two laptops running vista 64. All of a sudden I can't print from a laptop computer but can print fine on the other. With one that does not initialize the print job, and then a minute later, it says "Unable to print Document" when I open the HP Solution Center, it says "work has not print because of an error in the printing system." The laptop is able to communicate with the printer, it can check the connection settings, get ink levels, scanner works very well, etc., but never print jobs is completed.

  I tried to turn on/off the printer several times, I rebooted my laptop several times and it has not solved the problem. I checked the edits, and he said that everything was up-to-date. I tried all the solutions suggested and don't know what else to do. As I said, it worked fine til today. Help, please

  Too bad, solved with the help of cat online hp

• 7780 all in one print via bluetooth from a PC Windows 7, but not the other

  • Our HP 7780 all in one printer is connected to the network via bluetooth and has an ip address of http://192.168.1.65. A Mac and a Windows 7 desktop computer can print on it. An another Windows 7 laptop USED to be able to print, but no longer can, although it can browse to it and see the ink levels.
  • After restarting, the printer status says ready and a new print job appears in the queue, but after a bit it turns into error and never print.
  • We downloaded the base driver and reinstalled. During the installation of the 7780 was on the list of discovered printers and we chose, but during the installation, we got an error message that it could not find the printer.
  • Later we downloaded and installed the patch titled that product stops printing after network installed on Windows 7 (64 bit), rebooted and still the same error.
  • Help! How to be able to print the new Windows 7 laptop!

  The problem was McAfee firewall. First I disabled it, and print worked. Then I restored the default settings of the firewall and print continued to work.

• Able to add colspan with jQuery to table on one page, but not the other.

  I am able to use jQuery to add an attribute colspan to one of the rows in the table on a regular with products catalog page, but when I try to do a catalog that has instead of product catalogs, I see not the colspan attribute when I inspect the lines of the table.

  The catalog I'm talking about is http://www.thesanfordcenter.NET/suite-menu . The catalogue is secure. I have set up a temporary account and a password if you want to view the pages.

  ID: test

  Password: account 1

  I wonder if this is a problem with my jQuery or maybe what layout, I have jQuery on. Any help would be appreciated. Thank you.

  This page has some errors coming JavaScript on it.  If you press Ctrl-Shift-J or Cmd-Shift-J on a Mac in Google Chrome you will bring up the javascript console.  Anything in red is usually a javascript error or a 404 error for assets that are not found... you should always try to clean them.

  In this case, your "expstickybar.js" file is loaded on this page, and he introduces a "jQuery.noConflict (); statement that basically removes the possibility of using the variable ' $' as a quick trigger jQuery methods.  This is not the case on the pages of your catalogue main is because you only reference this script with a relative url: 'expstickybar.js', so when you are on your catalog at http://www.thesanfordcenter.net/suite-menu/appetizers page then it is looking for your javascript to http://www.thesanfordcenter.net/suite-menu/appetizers/expstickybar.js files so it is not find it is coming as a 404 error.

  A fast solution would probably be to try to remove or comment on this first line in expstickybar.js that says "jQuery.noConflict ();".  This might work, but it is also possible that it will break your expstickybar.js script. If this does not work, you should probably go into each of your statements of jQuery in your pages and wrap them up in a function that explicitly said to use the variable "$" for jQuery:

  (function ($) {}

  YOUR OLD JAVASCRIPT HERE

  (}) (jQuery);

  On a side note, also included two libraries jQuery in your site and that is never a good idea... you have jQuery 1.4.2 loading in the HEAD of your page or the page template and then you are also to load jQuery 1.6.2 in the BODY of your page or your page template.  You must use one or the other.  1.4.2 is old enough now, so if I was you, after you try to correct the mistake of jQuery.noConflict () you have got going, you need to move this jQuery 1.6.2 reference in your BODY element and replace it with jQuery 1.4.2 marked in your HEAD.

  Also - you should change your reference in your page templates to make the "expstickybar.js" a URL relative to the root instead of a relative URL of the file.  Change: