Pad has stopped working.

Similar Questions

• Pro L10: After using a wireless mouse, the touch pad has stopped working

  Pro L10. After using a wireless mouse, the built in touch pad has stopped working properly. At the start of the keypad icon touch shows and the touchpad works intermittently, after a few minuets, the icon disappears and the touch pad stops working. In the control panel / mouse & or device drive I can how the program works, then disappears.

  I deleted the software and reinstalled nothing doesn't. In some cases, I get a message that a pointer is on.

  Can you help me?

  Hello

  It seems that the wireless mouse or mouse wireless drivers/software has a bad influence on the touchpad.
  I put t have a good solution for this problem. Well, you can consult the page of the Toshiba driver for latest driver updates. If the updates doesn't solve this problem I suggest to use either the mouse wireless and disable the touchpad with FN + F9 key combination or use a regular USB mouse.
  I guess that you are having regular problems with a USB mouse.

• Satellite Z830-10U - Touch Pad has stopped working

  I have been using a USB mouse for a few weeks and touchpad is still operational. A few days ago the touchpad has stopped working. No issues are raised in the device manager that told me the power switch for the touchpad buttons. But by pressing the dedicated button and fn F9 has not changed anything.

  Really confused, but think I'm missing something really obvious that I can not think an event trigger, so assuming that some magic button will bring the key back to life.

  All help gratefully received...

  Hello

  What happens if you disconnect the USB mouse?
  You can use the touchpad again?

  From my point of view, the use or installation of an external USB mouse has affected the touchpad feature, I can't say with certainty why and what is happening right here, but I read in various forums on similar problems and sometimes caused USB mouse use touchpad problems.

  For example: in my case the touchpad does not work with connected USB mouse I was very confused, but found a solution in my case the option disable touchpad when USB mouse is connected has been verified and this disabled the touchpad.

  You can find it here:
  Control Panel-> mouse-> last (Advanced) tab-> the Advanced Settings button

  One of my friends couldn't use the touchpad because it has been disabled in the BIOS.
  It is worth to check also

• Game pad has stopped working

  I was able to get my joystick readings earlier today, but all of a sudden it stopped working. There is nothing wrong with the joystick (tested from the control panel).

  When I have the joystick of the query and create an indicator, I see that there are two "controllers" on my computer. Looks like labview is grateful for the 'other' the joystick, which isn't actually a game controller. Is there a way to specify what joystick I want to use (Logitech Attack 3)?

  A screenshot of my interface is attached.

  Thank you!

  Difficulty:

  On the joystick initialize block, create a constant for the device index specifying what "joystick" that you want to use.

• Satellite M40X-189 - Touch Pad has stopped working

  The touchpad has frozen. I rebooted the computer and the touchpad worked. This happened several times, and then by restarting does not clear the problem. I checked in the device several times Manager and sometimes the mouse was listed and sometimes it wasn't! I restored the computer to an earlier time when the touchpad was working but it does not solve it. An Agent from Toshiba offers the soft ware was corrupted and I need to save every thing and use the recovery disk to reload the software for the tablet. I'm not ready to do it again. Currently an ALPS pointing device and a compatible mouse HID are listed in Device Manager, and both are erroneously reported as working. Any other ideas on how to fix the touch pad?

  Hello

  In my opinion, you should try to use an external mouse to see if it works again and again. Believe me on this path it is not easy to say why this happens.

  There may be a hardware problem, but it must be tested. If you preinstall the unit with recovery CD unit will be clean and on this path, it is not possible to say that some additional software has any influence on that.

• Satellite L510-S432 - Touch Pad has stopped working

  Hi all.

  I bought this laptop last 2 weeks, it works well at first.

  It was once I rebooted the system to reduce some startup programs through msconfig, the touchpad doesn't work. Before the restart, there is a tool bar showing on top there whenever door - press the 'Fn' and now he gone too.
  However, the function "Fn" still work, where I still can control the brightness, the numeric keypad, and etc. through the fair. Fn Fn + F9 key that usually turn on/off the touchpad does not work.

  I had reinstalled the synaptic driver, but still, it did not work. I had activated back all system startup that I had to close, it still does not.
  I try to restore the system, but failed.

  Need help, thanks first to all who help.

  Hello!

  To me it sounds like that, the touchpad is simply disabled with FN + F9 and you will need to activate it.

  I assume that you are using Windows Vista, then you need to reinstall the Toshiba value added Package. You can find it on the Toshiba site. This package is required for the FN keys and other special functions.
  But before installing the new version, you need to remove the old version first.

  An interesting thing: you wrote this system restore failed. What exactly do you have and do you have an error message?

  Good bye

• Touchpad has stopped working in my Satallite L850

  Hello

  My Touch Pad has stopped working in my Satallite L850 - 150 / Windows 7 64 bit. Could someone help me?

  Kind regards
  DAV

  > Touchpad has stopped working in my Satallite L850
  How to understand this?
  You can toggle touchpad by using the FN + F9 key combination?
  The touchpad driver is installed correctly?
  Touchpad is listed in Device Manager?

• Scrolling touch pad has stopped.

  Scrolling touch pad has stopped working when you slide your finger upwards & downwards the edge on the right side, what could be wrong?

  Hello

  Control Panel - mouse - look for the TouchPad settings - mine is on the device settings tab
  and yours may be different (it is NOT the Scrollings tab which is for the mouse). On some
  You can enable and disable the scroll and/or the size of the area and the sensitivity of the value
  the touchpad.

  Some will have a TouchPad progam/control icon in the Notification area near the clock-
  at the bottom right.

  Check with the manufacturer of system support, documentation in line, or forums as there probably
  are shortcut keys that enable and disable the touchpad functions.

  ==========================================

  If necessary: (make sure that you have restarted at least once, if the above did not work)

  Panel of configuration manager devices - mouse and pointing devices - Double click on the touch pad-
  The driver tab - click on Update Driver (which is may not make anything like MS is far behind certifying)
  (drivers), now right CLICK on the touchpad and UNINSTALL.

  Then go to the USB and UNINSTALL ALL controllers except the category itself (all in).
  RESET

  This will refresh the driver for the TouchPad and battery USB.

  Here is the similar procedure in XP, Vista is the same, except that we need to clear the specific
  device if present.
  http://support.Microsoft.com/kb/310575

  Then go to the system manufacturer's website and get the latest touchpad drivers.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Elan Smart Pad of Ps/2 Port touchpad mouse has stopped working on my Gateway NE56R12u laptop

  I have laptop Gateway NE56R12u, bought in December 2012. For a month or so no problem. Then the Mouse touchpad momentum Ps/2 Port Smart Pad has stopped responding. Can I attach a USB mouse and use the laptop, but many times that I disconnected mouse USB, restarted the computer, the touchpad still seems ded. When I checked it says that the driver is up-to-date. What can I do to solve the problem? Thank you...

  Try to roll back the driver in Device Manager.

  And do not use windows update for drivers if that's what you were doing

• Click force has stopped working

  Hi, I'm on MacBook Pro (15-inch, mid-2015, retina), freshly updated for Sierra, force click has stopped working.

  I have checked all the options, rebooted the system, still no clear sign of what is the problem.

  Does anyone have the same problem? How to check weather force/pad touch works well?

  Any suggestions what to do?

  A pointer more, I also started to use the new keyboard to work, but my memory then click force was working well.

  This is the Office Mac Pro forum. I asked that your post moved to the forum of laptop MacBook Pro or another appropriate forum.

• Time capsule has stopped working

  Time capsule has stopped working. No orange or green light. Food is the device. Is there a fuse that might be blown? Reset it would bring to life?  Is it possible to get the backup data stored on it?

  Is there a fuse that might be blown?

  Sorry, but no.

  Reset it would bring to life?

  No, unfortunately it wouldn't be possible to reset the time Capsule if it will feed at all.

  Is it possible to get the backup data stored on it?

  Open the Capsule and remove the hard drive. Place the disk into a USB to SATA cart and which connect to your Mac.  Here, I'm assuming that the Time Capsule is not yet covered by warranty or the AppleCare, as it opens the warranty, if it is still covered.

  If you could post back with the model number of the Capsule of time... it is on the lower part of the device, probably embedded in the foam pad base, and begins with an 'A' followed by four numbers... we may have some additional information or advice for you depending on the model you have.

• The mouse settings do not work because rundull32 has stopped working

  My scrolling on the touchpad function does not work. I can't find any adjustments for the touch pad.

  I can't go in the settings of the mouse as "mouse settings do not work because rundull32 has stopped working".

  I tried to use Registry Mechanic and it did not work.

  How can I fix

  My scrolling on the touchpad function does not work. I can't find any adjustments for the touch pad.

  I can't go in the settings of the mouse as "mouse settings do not work because rundull32 has stopped working".

  I tried to use Registry Mechanic and it did not work.

  How can I fix

  do not use to all registry cleaners. they cause more problem, rather than their setting.

  type msconfig in windows in startmenu searchbox, and then press ENTER, then select normal startup, then click on apply then ok then restart your pc see if that fixes the problem? If it did not then:

  scanning using the preforms

  http://www.Malwarebytes.org/

  http://www.systweak.com/AntiSpyware/

  http://www.free-AV.com/en/download/index.html

  Make sure your system is clean first. use ccleaner to get rid of junkfiles http://www.piriform.com/ccleaner/download

  try to update your mouse driver software. (get the latest updates of your pc manufacturer website)

• After execution of the new updated Adobe, HP Elitebook 2760p left click on the touchpad button has stopped working.

  Original title: left click not working not not on HP laptop

  On my HP Elitebook 2760p running Windows 7 Pro 64 bit, left click on the touchpad button has stopped working.  The right click works, the works of pad, (scrolling and click on) it's just the left click.  It started after the execution of the new update of adobe. I tried to uninstall and reinstall the driver synaptec. I tried the mouse fast and slow speed. I tried pressing rigid, flexible, in different places. I would try to uninstall the update from Adobe, but it won't allow me.  So I uninstalled Adobe Reader and re-installed. Still nothing. Any suggestions?

  Hi cyrilmillot,

  You try to run the Adobe Reader removal tool to remove the Adobe reader completely the system software.

  See the link to Adobe to download the removal tool:

  Adobe Reader/Acrobat removal tool

  After retiring, you can check whether the left click works. If it does not, you could get in touch with Adobe support for further assistance on this topic:

  Adobe forums

  http://helpx.Adobe.com/support/

  If the problem persists, then it may be a hardware problem and you may have to contact HP support for further assistance:

  HP support

  HP laptops - use and configure the TouchPad (Windows 7 and Vista)

• my iPhoto has stopped working

  My iPhoto has stopped working. I did clean up. Now, when I click it shows cannot be opened because of a problem. The problem has not said.

  What version of OS X (or, if all goes well, Mac OS) are you running?

  What version of iPhoto do you run?

  iPhoto was not maintained or updated updated by Apple for about eighteen months.  Photos taken app supported since that time.

• 12.5.1.21 iTunes has stopped working. APPCRASH on Windows 7. WebKit.dll 7602.1050.4.5 error

  iTunes64Setup - 12.4.3.1 worked very well and no problems on Windows 7.

  After the update iTunes6464Setup - 12.5.1.21 or iTunes64Setup - 12.5.1.21, APPCRASH arrived.

  Get 2 x "iTunes has stopped working" and the messages to "Close the program" when you try to view the store / App Store or view account.

  Possible only "close program"...

  Tried to uninstall ALL Apple software (with deletion of all files) and reinstall again but still the same error!

  All software average iTunes to Apple, Apple Software Update, Apple Mobile Device Support, iCloud, Hello, Apple Application Support (32-bit and 64-bit).

  Checked the event viewer:

  1. error message:

  Name of the failing application: iTunes.exe, version: 12.5.1.21, time stamp: 0x57cfb09f

  Name of the failed module: WebKit.dll, version: 7602.1050.4.5, time stamp: 0x57c11f7f

  Exception code: 0xc0000005

  Offset: 0x004f0e09

  ID of the process failing: 0xcc4

  Start time of application vulnerabilities: 0x01d218b3194e2f01

  The failing application path: C:\Program Files\iTunes\iTunes.exe

  Path of the failing module: C:\Program Files (x 86) \Common Files\Apple\Apple Application Support\WebKit.dll

  Report ID: 68f80588-84a6-11e6-8df8-4851b741621f

  2. Windows Error Reporting

  Fault of type 1024926102, bucket 25

  Event name: APPCRASH

  Answer: No available

  Cabin ID: 0

  Signature of the problem:

  P1: iTunes.exe

  P2: 12.5.1.21

  P3: 57cfb09f

  P4: WebKit.dll

  P5: 7602.1050.4.5

  P6: 57c11f7f

  P7: c0000005

  P8: 004f0e09

  P9:

  P10:

  Hello, follow the instructions If you see 7 error (error Windows 193) when you try to install iTunes for Windows - Apple Support