Page Images software Cisco first Infrastructure 2.2 broken after installing patches

Similar Questions

• Cisco first Infrastructure 2.2 API GET Interfaces

  Hello

  I am using Cisco first Infrastructure 2.2 and I am trying to get some info of the API in order to build a model.

  But I can't find how to get the name of all the interfaces of an IP address from the device. I tried many queries, but none of them is what to expect. Is there a way interfaces?

  Thank you.

  Guillaume.

  Hello, don't 'SE InventoryDetails' gives you what you need? I believe you can use the features of REST to filter down to only the devices you are interested.

• Cisco first Infrastructure 3.1.3 - patching

  Hello

  a customer has installed a traditional life cycle license, ICC running the 3.1 version. We would like to upgrade to version 3.1.3.

  According to Cisco, ICC 3.1.3 supports the licensing model based on the chips for the cycle of life and insurance licenses. License consumption is based on symbolic weight by device type.

  ICC 3.1.3 takes to support the generation of a file single license with rights acquired to manage existing devices without having to purchase additional licenses. This special privilege is provided to existing customers as a one-off during the first Infrastructure 3.1.3 update installation.

  Does someone of you could advise me the way how to obtain such a license?

  Thank you very much.

  Jozef

  There is no need to change the license type if your existing licenses extend on your managed devices.

  I have updated three separate facilities from 3.x PI to 3.1.3 without changing the type of license.

  If you want or need to do, then open a TAC case, asking permission to support and licensing team will take care of him for you.

• Collection of newspapers from Cisco first Infrastructure

  Hello

  I am currently working in integrating Cisco first Infrastruture with Qradar siem tool.

  Can someone help me out below questions:

  (1) how and where is the paper stored in Cisco first. ?

  (2) newspapers contains logs first Cisco devices manages?

  (3) is it possible to sent Cisco newspapers first to a third-party device. ?

  Hello

  (1) how and where is the paper stored in Cisco first. ?

  / opt/CSCOlumnos/logs

  (2) newspapers contains logs first Cisco devices manages?

  AS FAR AS I KNOW,

  Infrastructure main Syslogs are directly read the 514 and then filtered udp port
  , no SEV1 and SEV2 syslogs are removed and not be exchanged from db. The
  syslog messages will not be saved in files.

  So far, PI support only syslog SEV 0,1 and 2.

  (3) is it possible to sent Cisco newspapers first to a third-party device. ?

  Unfortunately, this feature is not there in PI so far.

  Thank you-

  Alya

  Ratings encourage contributors *.

• CISCO FIRST INFRASTRUCTURE 2.2

  Dear Sir.

  We have purchased preferred infrastructure cisco 2.2 and have just download the software:

  2.2 preferred infrastructure the physics of ISO Image (from GEN 1 device only)

  PI - APL - 2.2.0.0.158 - 1 - K9.ISO

  This is the first time, we will install the first cisco.

  the user has a server with all material specifications recommend for GEN1 and the installed operating system is WINDOWS 7 Professional.

  2.2 first cisco infrastructure will run on this server without any problem?

  awaiting your response earlier.

  Roger

  N °

  This image will only install and be supported on the Cisco Gen 1 (hardware OEM IBM) brand device.

  ISO is self-contained and designed to be installed on this server bare metal only. It includes a distribution of Linux RHEL custom as the operating system. It has built in and not configurable pilots to accurate NICs, hard disk drive controller and configuration etc.

  You should be getting version 3.1 in the form of open virtual appliance (ova) and the installation on a server with VMware ESXi.

• Cannot add WLC 5508 7.2.111.3 Cisco first Infrastructure 2.0

  Although the list of the Cisco Infrastructure compatibility matrix first on this 7.2.111.3 is supported for PI 2.0

  I'm not able to add the controller to the PI 2.0.

  The State of accessibility has always shown "Unknow" and the situation always SNMP "no answer for SNMP Get."

  There is no firewall between the WLC and PI.

  And ping test shows that it is accessible.

  If I try to add the controller to port managers (I know it's not working, but I want to try the accessibility), the State of accessibility showed "Reachable" but the SNMP State always demonstrated error.

  And if I use some SNMP test software to test the SNMP port. SNMP can be cited.

  I try down below the "Maximum VarBinds get PDU" but no luck.

  Something I can do to solve the problem?

  Hi, please check on wlc 5508:
  have you enabled snmp on wlc?

  mrncciew.com/2013/02/14/configuring-SNMP-on-WLC/

  Concerning
  Please rate if this can help

  Sent by Cisco Support technique iPhone App

• Cisco first Infrastructure 2.0 is compatible with the Hyper-V environment?

  On version 2.0 first Cisco Infrastructure. It is now possible?

  First requires ESXi:

  http://www.Cisco.com/en/us/docs/net_mgmt/Prime/infrastructure/2.0/QuickStart/Guide/cpi_qsg.html#wp46865

• Cisco first Infrastructure 2.2 DVD installation fails

  We want to migrate to 2.2 first, but management does not want downtime of the device. Try to install the first 2.2 via DVD on a Dell R300 server and then import config of our apparatus to test questions. However, the NCS installation fails due to a problem file. Second burned DVD fails as well. Has anyone tried this before? Using a virtual machine (at this stage), is not an option.

  I have not tried, but don't wait until it works.

  The .iso (DVD) image is tailor-made for the installation on the device of Cisco NCS material. To install on any other material, you must first have the VMware ESXi hypervisor and install using the .ova image.

• Backup folder Configuration Cisco first infrastructure 2.0?

  Hi all

  where is the backup devices folder in PI 2.0 configuration, I tried searching with winscp for *.cfg but have not found anything.

  the most funny thing is when I am connected via the WEB (GUI), I can see the configurations of devices (under configuration of archive).

  so anyone know where is the file?

  Thank you

  Dawit

  Hi Dawit,

  https://supportforums.Cisco.com/message/3975460#3975460

  check the thread above, hope this will answer your query...

  Thank you-
  Alya
  [Note the useful post]
  Ratings encourage contributors *.

• First elements monitor window broken after updates

  I recently installed Adobe several "updates" but am still under first elements v10 (on Win 7 64-bit).  Now the application refuses to update the monitor display window. Also, the display of the preview window seems to be broken. When the "reading" of the film, the timeline pointer moves and audio, but the video display is static.

  I can move the pointer of the timeline to a specific point and click in the monitor window and it will display a static image that reflects exactly the point in the timeline panel, but will not update with playback.  I can manually move the pointer of the chronology and the monitor display will be updated, but only within the same "clip" that the monitor has been activated in. Moving an adjacent clip or still picture and the screen does not refresh.  Does anyone have an idea what has broken or how to fix it?  Frustrating after many hours spent editing a feature film before the 'update '.

  Thanks in advance!

  hipeakman

  What video/graphics card your computer use? If it's NVIDIA Ge Force and his version of the driver is up to date, it's your problem that cannot be resolved.

  There is a serious problem specific to the first 10 NVIDIA GeForce items requiring the use of a version of the NVIDIA driver may 2013, not the version of the updated driver.

  See the following for more details on this.

  First Elements ATR troubleshooting: PE10: NVIDIA video card Driver Roll Back

  If it is as I suspect, ex-driver work may have been automatically updated with the latest version. Your hope of recovery is to find the older having previously worked driver still on your computer and replacing the new driver with the former.

  If your computer does not use a card NVIDIA GeForce, then we'll go after other ways of solving problems.

  Please consider and provide more details.

  RTA

• Softex Omnipass software of fingerprint recognition works does not after installing Internet Explorer 9.

  Original title: recognition of fingerprints and IE9.

  I recently "upgraded" to IE9 and now my Softex Omnipass of fingerprint recognition software does not work.

  Hello

  Internet Explorer 9 is a BETA product and therefore may not work with all your software perceive.
  I recommend to uninstall IE9, and then check to see if you Softex Omnipass program works.

  If this isn't the case, uninstall the Softex and then reinstall.

  I hope this helps.

  Thank you

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• No page on ebook only borrowed from the Library open after installing AVG

  It gives me a book cover, showing more than 300 pages, but none is available. I can't return the book to the library is... Any ideas? Thank you very much

  Afret resettlement of Digital Editions, deleted all files PDF, managed to remove all instances of digital editions and "return item" - ignored the fact that it gave me error E_BAD_LOAN_ID. Revint Open Library, and the book shown always as it has already borrowed. Tried to download in different formats, and fortunately open Libriry detected that it was borrowed for me, but that I had a problem opening it. They gave me an option to download it again, and that solved my problem. After a few hours tinkering. I would have finished the book right now!

• Infrastructure 2.0 Cisco first deployment models

  Hello world

  I wanted to deploy a configuration model 'first infrastructure 2.0. I tried with the output of the model "banner Configuration-IOS" box. I have deployed it to a device that is a switch to Cisco Catalyst 2960 - 24PC - L. I chose "Add" in the menu dropdown 'Connection Action' and typed in 'Test' in the field 'login Message. All the rest is the default value. After you apply the changes, I clicked on the Ok"" button. After this IP trying to deploy the model configured on this device. A few seconds later the 'Last Run status' column in the 'jobs' dashboard, said "failure." The 'summary', said:

  "Error in the execution of XDE procedure, Error Message::No 'CLI_ENABLE_PASSWORD' attribute for the device"2344372"

  I tried to figure it out and searched the Internet but I couldn't find a solution.

  Thanks in advance for your efforts!

  Have you confirmed that the enable password is correct in the credentials of the device? (Device Center, select and modify the devices)

• Satellite Pro A210-1AZ: what imaging software can I use

  People,

  I recently bought a Toshiba Satellite Pro A210-1AZ.

  It works well, as far as I can tell, but I have a problem with the disk imaging software.
  I bought Acronis True Image 11 and it worked OK for Windows, but it wouldn't start in the program of either the Acronis Secure Zone, or starting from the bootable recovery media. (He did start, but the program would not load). Attempt to restore from Windows needs to restart before the process begins, with the result the same, the PC boots, but the program does not load.

  Acronis restore successfully to a partition that does not have the 'C', IE System partiton.

  I managed to get a refund of Acronis under their warranty of 30 days without any problem.

  I tried the software equivalent of Paragon.
  Without extensive trials I seem to have the same problem; It won't boot from the recovery media.

  Search for clues on the internet was not completely successful, but I'm not alone with the problem, and the feeling seems to be that it is something to do with SATA drives.

  I'd give 'Phantom' to try, but I don't want to pay for it and find it does not work and I can't get a refund. I can't find a trial version of it anywhere.

  Can someone advise me to partition imaging software which they KNOW works with this model, while booting to restore?

  Thanks in anticipation,

  Kind regards

  Simsybloke

  Hi Matt

  I think all professional work of imaging software works on your laptop.
  I think that you were not able to boot from the CD image will be created because you didn t includes the necessary Intel Matrix Storage Manager.

  All the portable era generation support the SATA controller (because of better performance), and so the laptops with the SATA drives.

  The Intel Matrix storage controller includes the SATA driver.

  For example; If you want to install XP on this laptop, you must first include the SATA driver using the F6 key during the installation procedure.
  Without the driver SATA XP will not see the HARD drive!

  I think that the SATA driver is a key.

  See you soon

• Software Cisco Connect think connect my internet is lost

  Software Cisco Connect think that my internet connection is lost, but it's not. It won't take me any further than that.  I would just use the administration of "Advanced" page but I am trying to enter to disable the guest network and for some reason, Cisco made that only configurable from the Cisco Connect software.

  If you install the router manually (without Cisco connect) so the guest network will be automatically disabled / is not created.

  Reset the router for 30 seconds. Release the reset button and wait 30 seconds. Power cycle the router and reconfigure the router manually.

  Do not run the Cisco connect. Configure the router manually.

  Follow this link to configure the router with cable Internet service.

  Follow this link to configure the router with DSL Internet service.