Page updated replacement values

Similar Questions

• Oracle apex 5.0: not update the values in the Collection.

  Hello again,

  I have a problem in IR where content comes from the collection query.

  Now the question is when I update the value of the column in the report and click on the custom button, that it will update the value of collection and insert the updated values of the collection member in another table that works well according to my condition, but when I will apply to any word in the search bar (say books in order not to update the values of books) and tries to update the value as a result of research above requirement does not work I mean the collection is not updated. Apex. Oracle.com

  testdump/developer/Office

  All of the Suggestions!

  Thank you

  Pranav.

  Pranav.Shah wrote:

  I have a problem in IR where content comes from the collection query.

  Now the question is when I update the value of the column in the report and click on the custom button, that it will update the value of collection and insert the updated values of the collection member in another table that works well according to my condition, but when I will apply to any word in the search bar (say books in order not to update the values of books) and tries to update the value as a result of research above requirement does not work I mean the collection is not updated. Apex. Oracle.com

  testdump/developer/Office

  The "coll update" process fails with a ORA-01403: no data found error. This happens in line 11 because of the access attempt to the wwv_flow.g_f01 using the variable array subscript c who has been incremented beyond the size of the table, which is now smaller because of the IR filter applied.

  begin declare
    c pls_integer := 0;
  begin
  for c1 in (
    select seq_id,c001 from apex_collections
    where collection_name = 'MATRIX2'
    ) loop
  c:=c+1;
  apex_debug.message(c);
    apex_collection.update_member_attribute (p_collection_name=> 'MATRIX2',
    p_seq=> c1.seq_id,p_attr_number =>'2',p_attr_value=>wwv_flow.g_f01(c));
  
  end loop;
  end;
  end;
  

  I agree with fondant tabular forms on interactive reports, but you can meet your requirement as follows. In your application, see page 2.

  1 Add a column of form element hidden IR containing the sequence number of collection:

  select
      c001 col1
    , apex_item.text(2, c002) col2
    , apex_item.hidden(1, seq_id) seq
  from
      apex_collections
  where
      collection_name = 'MATRIX2'
  

  2 place the question of the hidden form in the report using the COL1 Expression HTML attribute:

  #COL1##SEQ#
  

  3. change submit to the process if it is driven by the subject table, not the existing collection:

  begin
  
    for i in 1..apex_application.g_f01.count
    loop
      apex_collection.update_member_attribute(
          p_collection_name=> 'MATRIX2'
        , p_seq=> apex_application.g_f01(i)
        , p_attr_number => '2'
        , p_attr_value=> apex_application.g_f02(i));
    end loop;
  
  end;
  

• LOVs using cascading on the Page elements with values exceeding 4000 characters

  A few days ago, I asked a question on the community, but it turned out that there was something wrong with my account and they have removed the item, so I'll just post the solution I found here now:

  Well, I found a way to use LOVs cascading on page elements with values exceeding 4000 characters:

  Let's say I have a shuttle named P1_ORGANISATIE with "List of values" box, a dynamic LOV named "Source: lists of values Query" containing the value:

  Select NAAM as display_value, ID like return_value

  of NINEHAM

  order by 1

  If the number of records-NINEHAM is insufficient, the length of the value of P1_ORGANISATIE, which is a list of concatenated with colon separated digital ID, can exceed 4000 characters.

  Now, suppose I have a list of selection called P1_TEST that is connected through "List of values"-> "Cascading LOV Parent article (s)" with P1_ORGANISATIE, using a named LOV dynamic with "Source: lists of values Query" containing:

  Select distinct TST. NAAM as display_value, TST.ID as return_value

  of the OTE NINEHAM

  Join the AFDELINGEN ADG ON (ADG. OTE_ID = OTE.ID)

  Join the DEELNEMERS DNR ON (DNR. ADG_ID = ADG.ID)

  Join TESTDEELNEMERS TDR WE (TDR. DNR_ID = DNR.ID)

  Join TESTEN TST ON (TST.ID = RDT. TST_ID)

  where instr (":" |: P1_ORGANISATIE |) '':'', '':'' || OTE.ID | :'') > 0

  order by 1

  In this case, when P1_ORGANISATIE exceeds 3998 characters, you'll get an "ORA-01704: string literal too long"-error and the P1_TEST will show an element called "undefined".

  A way around this is possible because for a named LOV, you can use a "function that returns a sql query" instead of a simple sql query. In other words, we can apply in the context of PL/SQL and thus have maximum for expressions of 32767 instead of 4000 characters. In addition, it is possible to use the two APEX_UTIL. STRING_TO_TABLE and APEX_COLLECTION.

  Setting "Source: lists of query values" on the LOV appointed to P1_TEST with the following code will work:

  DECLARE

  l_selected APEX_APPLICATION_GLOBAL. VC_ARR2;

  l_qry varchar2 (32767): =.

  "Select distinct TST. NAAM as display_value, TST.ID as return_value

  of the OTE NINEHAM

  Join the AFDELINGEN ADG ON (ADG. OTE_ID = OTE.ID)

  Join the DEELNEMERS DNR ON (DNR. ADG_ID = ADG.ID)

  Join TESTDEELNEMERS TDR WE (TDR. DNR_ID = DNR.ID)

  Join TESTEN TST ON (TST.ID = RDT. TST_ID)

  $1

  order by 1';

  BEGIN

  IF: P1_ORGANISATIE IS NULL

  OR LENGTH(:P1_ORGANISATIE) < = 4000

  THEN RETURN

  Replace (l_qry

  ,'$1'

  ,' where instr (":" |: P1_ORGANISATIE |) '':'', '':'' || OTE.ID | :'') > 0'

  );

  ON THE OTHER

  l_selected: = APEX_UTIL. STRING_TO_TABLE(:P1_ORGANISATIE);

  APEX_COLLECTION. CREATE_OR_TRUNCATE_COLLECTION (p_collection_name = > 'ORGANISATIE_COLLECTIE');

  FOR id IN 1.l_selected.count

  LOOP

  APEX_COLLECTION.add_member (p_collection_name = > 'ORGANISATIE_COLLECTIE')

  , p_n001 = > to_number (l_selected (id))

  );

  END LOOP;

  RETURN

  Replace (l_qry

  ,'$1'

  ,'join apex_collections ON APC (APC. COLLECTION_NAME = "ORGANISATIE_COLLECTIE" AND APC. N001 = OTE.ID)"

  );

  END IF;

  END;

  Andreas Groenevelt says:

  A few days ago, I asked a question on the community, but it turned out that there was something wrong with my account and they have removed the item, so I'll just post the solution I found here now:

  Something was wrong with the whole site: AP invoice tolerance

  I don't post anything substantive until we find out what is happening.

• Oracle XQuery replacement value

  Hello world

  Used Oracle: version 11.2.0.3.0

  After a few days, I gave up, but I'm sure you have a solution.

  I want to change some items, always the same element (same name), with the use of a string tokenize function. I use one, but my problem is the index of the item to change in the loop. I tried to use the $position () function, but without success. Maybe we can use an index but how, because the XQuery variables are immutable.

  Here is an example:

  update the ingredients set sections = XMLQuery (' copy $gr: = (.modify)

  Let $values: = "1.0,2.0,3.0,4.0,5.0,6.0,7.0,8.0,9.0,10.0,11.0,12.0,13.0".

  for $i in $gr/ingredients/section/sub_section/ingredient/value_gr

  return the value of replacement of the $i with ora:tokenize($values,",") node [5])

  return $snf' by the way the sections referring content) where ingredient_id = 601;

  This application works, but of course I want to change [5] by 1,2,3...

  I think you see what I want.

  Thanks in advance

  Hello

  You are amazing!

  I wrote my answer and suddenly your second answer, Oh wait, phew (in french), my question was clear.

  I tried and now the update is OK.

  This writing is ok for you?

  update the ingredients set sections = XMLQuery (' copy $gr = .modify ())

  Let $values: = ora:tokenize("1.0,2.0,3.0,4.0,5.0,6.0,7.0,8.0,9.0,10.0,11.0,12.0,13.0",",")

  for $i to $p in $gr/ingredients/section/sub_section/ingredient/value_gr

  return the replacement value of the node $i with $values [$p])

  return $gr' by the way the sections referring content) where ingredient_id = 601;

  I have to send you a box of chocolates for Christmas!

  Thank you very much

• How to update the value of a value in a table

  APEX - 4.1.0.00.32
  Version of DB - 10 g
  Web - OHS server architecture
  Browser - IE8
  Theme - 9
  
  Hello
  
  I have a tabular form and I want to update the value of a field using a process based on an add-on.
  
  the name of the column in the form of tables is (name of column P22_PROJECT_ID)
  
  The error I get is
  
  ERR-1002 unable to find point item ID 'P22_PROJECT_ID' in the application "103".
  
  Error unexpected, unable to find the name of the option at the page or application level.
  
  The field is questioned as
  
  Select pt.project_id P22_PROJECT_ID
  
  The code I'm trying to use in the process is
  
  : P22_PROJECT_ID: =: P10_PROJECT_ID;
  
  I also tried without the colon (P22_PROJECT_ID), but the application does not recognize.
  
  Any help would be appreciated.
  
  Thank you

  the tables for is on page 22?
  the project in page 10

  I think you go to page 22 page 10
  Create a new item in page 22 as p22_project_id
  Since 10 passes as a parameter the page p1o_project_id and set p22_project_id

  by default as p22_project_id

• Update the value Table B if table A the value of different

  Hi all
  I'm using Toad for Oracle and need assistance with a trigger. I have two tables tables A and B Table with some of the same fields. I want to only update the values in the array B, if the values in table A are not equal values in table B table A update. Don't update the record where the primary key of the Table equal to the foreign key in the Table B. I have a sample script below, I hope someone can give me an example, I can develop and test. Thanks for reading also.

  CREATE OR REPLACE TRIGGER AU_Table_A
  AFTER UPDATE ON Table_A
  FOR EACH ROW
  BEGIN
  If Table A :old.value != Table A :new.value
     then 
     update 
  --Update Table B value with Table A updated value
     Table B :old.value = Table A :new.value 
  where Table A primary key = Table B foreign key
  ............
  END IF;
  END;

  Published by: Nikki on December 6, 2011 07:50

  Hi Nikki,

  If I understand correctly, then maybe

  create or replace trigger au_table_a
    after update
    on table_a
    for each row
    when (old.value != new.value)
  begin
    update table_b
    set    table_b.value = :new.value
    where  table_b.foreign_key = :new.primary_key
        and table_b.value != :new.value;
  end au_table_a;
  /
  

  Note that the solution is not trying to handle NULL values. If you have NULL in to either A or B, we have to manage those specifically

  Concerning
  Peter

• Shares of the layers disappear when the pages are replaced in PDF format?

  If I replace pages in a PDF with updates, my actions to layers seem to not keep the stock they've installed their. I check the properties and they seem to be there, but the action does not work.

  I replace the exact amount of pages and the exact amount of layers.

  Any ideas? Did I miss something if I replace the pages?
  

  I think that you need to restore stocks. The layers are not as annotations that are left in place when the underlying page is replaced. Layers (OCGS) are content page, then when they are replaced by something new, the connection is broken.

  Consider what would happen if you replace a page which had OCGS with one who is not. The OCGS being more present, all actions that naturally control would not work. Thus, even when you replace one page by another which contains the same OCSs, they are still not considered the same as a lower level and actions may no longer work.

• Page updated Firefox always said 'you need to update Adobe Flash Player now! ", but identifies the missing plugin update process which I am unable to find.

  I click the button to update Flash Player on the web page updated to Firefox that brings me to the Adobe Flash Player download page. By clicking on the download button now takes me to a page of instruction poster screenshots to wait during the process. The InfoBar at the top of the page says it has a missing plug in, but by clicking on the button "install the plug-in missing" translates to "not found any plug-in." There is no other button or active link on the Adobe page that allows me to move forward with the process. This same thing happened the last several times that Firefox has updated. Flash Player has not been updated for a long time.

  Is easier to use the manual setup programs to install Flash, for details, see http://kb2.adobe.com/cps/191/tn_19166.html#main_ManualInstaller

• page updated driver?

  Why is there no page update driver for the y570?

  http://consumersupport.Lenovo.com/UK/en/DriversDownloads/drivers_list.aspx?CategoryID=867235

• page updated window, cannot load

  page updated window, cannot load

  Operating system?

  How to reset the Windows Update settings?
  http://support.Microsoft.com/kb/971058

  Save the Windows Update engine files
  http://support.Microsoft.com/kb/326253

  TaurArian [MVP] 2005-2010 - Update Services

• update the value of the column to the next value

  Hi all

  create table xxc_test (date of from_date, to_date date, amount, number incr_amount);

  Select 2014, 2015, 3000, the double null

  If suppose if input data in the incr_amount then let say 1000 I want to update the value with incr_amount column amount

  Select 2014, 2015, 4,000 of the double

  If not even though it is as

  Select 2014, 2015, 3000, the double null

  and must be updated to the year

  Note: I spend the year, amount,incr_amount manually (run-time)

  Post edited by: Rajesh123 Note added in the subect

  Hello

  : new.incr_amount: = 0; also use it in code.

  The condition " If : new.incr_amoun is > 0" then (sure fire or change the value only if the increment is positive. ).

  ,....

  ..
  

  end if;

  
  

  -Thank you

  Pavan Kumar N

• Apex 5, call a modal page, set page elements, in values referenced title page elements are not the same (correct) than the item itself

  Hello

  Apex 5.

  IR (departments) on page 2 I want to open a modal page 3 (classic report) with the detail data (from emp) for a Masters depno via a link on depno column.
  In Page 3, I created two elements P3_DEPNO and P3_DNAME. These elements are defined in modal page 3 of page 2.
  When I do these two visible elements on page 3 I can see, the values are set correct according to the value in column (depno) link on page 2.
  However, I would like to place these element values in the page title of page 3
  Title: PGE for DepNo: & P3_DEPNO., DepName: & P3_DNAME.

  It happens that the values mentioned in the title of the page are not the same (good) as in the items himself.
  Initially, they are NULL. Only when I refresh page 2 the values change but remain the same (last called depno) as long as I'm doing a new refresh of page 2.

  I wonder how I can run to display the values of the correct point in the title of the page corresponding to the values of the correct page element (that I have hidden).

  Y at - it something more to do, or it could be a small bug?

  I've created a little demo app on
  https://Apex.Oracle.com/pls/Apex/f?p=75955:2

  WS: AMLWS001

  Demo/demo (developer is)

  Please see the report 1.

  Thank you in advance!

  André

  Hi andremi,

  andreml wrote:

  Hello

  Apex 5.

  IR (departments) on page 2 I want to open a modal page 3 (classic report) with the detail data (from emp) for a Masters depno via a link on depno column.
  In Page 3, I created two elements P3_DEPNO and P3_DNAME. These elements are defined in modal page 3 of page 2.
  When I do these two visible elements on page 3 I can see, the values are set correct according to the value in column (depno) link on page 2.
  However, I would like to place these element values in the page title of page 3
  Title: PGE for DepNo: & P3_DEPNO, DepName: & P3_DNAME.

  It happens that the values mentioned in the title of the page are not the same (good) as in the items himself.
  Initially, they are NULL. Only when I refresh page 2 the values change but remain the same (last called depno) as long as I'm doing a new refresh of page 2.

  I wonder how I can make it work to display the values of the correct point in the title of the page corresponding to the values point right page (what I have hidden).

  Y at - it something more to do, or it could be a small bug?

  Page title is rendered before the page elements, that is why is not highlighted in your title.

  I don't think directly, we can use the page as a page element value.

  Creates a copy of yours and made the change it new App id - 45390

  There, I created a static area without a model before your report area and put your article into that.

  then displayed title PGE for DepNo: & P3_DEPNO, DepName: & P3_DNAME. for the area of your report.

  Kind regards

  Jitendra

• Help! Try to update the values of Member - but does not (completely).

  We are trying to resolve a calculation in the middle of the update of business cycle. There is a push to update existing values for an account specific forecast time scenario.

  Essentially, we want to update the value of forecast current account 56400 to 0.33 * ("56100" + "56110" + "56300" + "56310" + "56320").

  The solution is to make sure only rest of the current year, Apr - Dec, updated forecasts to date.

  Currently the rule runs, but handful of values is never get updates - I'm not doing correctly?

  relatively small cube BSO, Account (dense).

  Here is the rule of this task running

  SET CACHE HIGH;

  FIX (& those 'Forecasts', 'the current iteration","F_00000");

  "56400")

  IF (@ISMBR (& NextMonth: "Dec"));

  0.33 * ("56100" + "56110" + "56300" + "56310" + "56320");

  ENDIF ;)

  ENDFIX;

  -followed by a calc all

  I expect to update all occurrences 56400 in the fix above...

  Thanks in advance!

  Himanshu-

  You probably need...

  UPDATECALC OFF SET;

  .. Smart calc or .in there will prevent 'own' blocks to be recalculated.

• How update the values in ValueChangeEvent...

  Hello world

  I use Jdeveloper 11.1.2.0.0.

  I have a scenario as follows. I have 2 fields like password and Confirmpassword.

  I wrote a ValueChangeListener for the password field to make some validations and I wrote an other ValueChangeListener for the field Confirmpassword inorder to compare values entered in the two fields.

  But here..., event in ValueChangeListener field Confirmpassword, iam cannot retrieve the password field value to compare.

  
  

  The reason is... ValueChangeListener is located in ApplyRequestPhase/ProcessValidationsPhase and updated the values in UpdateModelPhase values are so not updated and impossible to get in the ValueChangeListener event.

  
  

  In order to update the values of the tree of components in case of ValueChangeListener, I tried to use code below

  valueChangeEvent.getComponent () .processUpdates (FacesContext.getCurrentInstance ());

  
  

  But the values are not updated... Please suggest me to complete my scenario. Do what is necessary. Thanks in advance.

  
  

  Concerning

  Leprince
  

  
  

  
  

  
  

  
  

  
  

  
  

  
  

  
  

  
  

  
  

  
  

  
  

  
  

  
  

  Hello

  Change the scope of the bean to viewScope.

  Kind regards

• Apex + Javascript page redirect with value

  Hi, I have a dynamic action with the where I redirect another page via javascript.

  window.location = 'f?p=112:1::::NO::P1_KEY:#P1_HDN#';
  

  The first question I have, how can I present the current session?

  It must be described a bit more... I also have a hidden field on the first page. The value of this hidden field must also be submitted to the other page. How can I do this and why don't the hash tags work won´t?

  See you soon

  In action dynamic javascript,.

  Place the following code

  var p1HiddenVal = $("#P1_HDN").val ();

  var href = ' f? p = 112:1: & SSESSION. : NO::P1_KEY: "+ p1HiddenVal;

  Window.Location = href;