page updated window, cannot load
page updated window, cannot load
Operating system?
How to reset the Windows Update settings?
http://support.Microsoft.com/kb/971058
Save the Windows Update engine files
http://support.Microsoft.com/kb/326253
TaurArian [MVP] 2005-2010 - Update Services
Tags: Windows
Similar Questions
-
Page updated Windows cannot load the
Please help, I also get this problem, I ran across your solutions of http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/8e6340e2-74b7-4950-a467-b9a3f02a0769?prof=required here and it seems still not solution. I am running Vista Home Premium.
I get the "page failed to load" when you try to run the update of Windows with IE7, IE8, Windows Update icon in the status bar, as you try to run windows update in Control Panel and the Windows Security Center.»
Can I change the automatic update of Windows Security Center, but I get the "failed to load the page" if I click on the updateing automatic turn on or off of in Control Panel. I loaded the .net 1.1 and for .net 1.1 SP1, but I think the update still worked after that. The last think I remember do is revealer of Windows update will not download or display IE8 in the "update list" (although you can see I have to see if that would fix it and it didn't download)
suggestions, you can add?
Thank you very much
squeakerPlease help, I also get this problem, I ran across your solutions of http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/8e6340e2-74b7-4950-a467-b9a3f02a0769?prof=required here and it seems still not solution. I am running Vista Home Premium.
I get the "page failed to load" when you try to run the update of Windows with IE7, IE8, Windows Update icon in the status bar, as you try to run windows update in Control Panel and the Windows Security Center.»
Can I change the automatic update of Windows Security Center, but I get the "failed to load the page" if I click on the updateing automatic turn on or off of in Control Panel. I loaded the .net 1.1 and for .net 1.1 SP1, but I think the update still worked after that. The last think I remember do is revealer of Windows update will not download or display IE8 in the "update list" (although you can see I have to see if that would fix it and it didn't download)
suggestions, you can add?
Thank you very much
squeakerI got stardock I uninstalled and my page now work correctly. I got the same error. could be other software if you don't have star dock that caused the stoppage of work.
Thank you -
My drive hard seagate is not recognized on my laptop, I can see it in the legacy of the laptop but has an exclamation deside it, there a message when I tried to solve the problems, error was not fixed, the device status is "this device does not work properly because Windows cannot load the drivers required for this device. (Code 31) »
Is anyone know how can I access my hard drive again?
Thank you
Hello
You has made changes to the system before the error appearing? Cancel the changes.
(1) in Device Manager > right click on the driver, and then select uninstall
Reboot and Windows will reload the driver
(2) remove the upper & lower filters that cause errors in Code 31
http://pcsupport.about.com/od/driverssupport/HT/UpperFilters-LowerFilters.htm
Access the manufacturer's Web site and search for updated driver
-
Original title - USB - IF xHCI USB Host Controller
This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)
I have a permanent error on my computer and when I run the troubleshooter I get the above message. It says Windows cannot load the driver.
Hello
USB devices remove all you can - restart the computer - is still there, the error? If it isn't
It is related to one of the add-in devices that you removed. If she is still there, then, the question is
either a device internal who can not remove or physically with the USB bus itself.
If it was not there, add devices at a time until it is displayed - keep in mind that it is
possible that there are two (or more) devices in conflict over the issue. Once you
identified the check of the aircraft with the help of the manufacturer.1. to find the control panel - device - device - right-click on it - uninstall - Manager then
Restart the computer to see if it clears.2. same place - double click on the device - driver tab - driver update - to see if that helps.
3. check with the support of system manufacturer (manufacturer of motherboard for customized systems), their
online documentation and drivers, diagnostics and ask questions in their forums on all known
questions. Update the Bios and chipset or other USB drivers.=====================================
If necessary, we will use these additional troubleshooting methods:
How to fix Code 31 errors
http://pcsupport.about.com/od/findbyerrormessage/a/code-31-error.htmI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
Running Server 2003, Web Edition SP2 Build 3790.
The two ports COM1 COM2 & lost in the Terminal Server session with a managed switch.
Gives the device as Manager: "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) "on both ports. pilots - serial.sys and serenum.sys (5.2.3790.3959 worm file: 64 KB / KB 18: 2/17/2007) 03:58
Tried all common solutions driver update and uninstalling/reinstalling SP2 installation rerunnig. But the problem remains.
Hello
Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for Windows Server on TechNet. Please ask your question in the TechNet forum.
http://social.technet.Microsoft.com/forums/en-us/winserverhyperv/threads
Diana
Microsoft Answers Support Engineer
-
And it displays the following message: "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) ». I tried all the tricks troubleshooting to no effect. I uninstalled and reinstalled and look for the updates to install. What should I try next?
http://support.Microsoft.com/kb/314060
Your CD or DVD drive is missing or is not recognized by Windows or other programs
-
Audio loss. Device Manager indicates Microsoft UAA Bus Driver as: "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) ». Tried to update driver and restore without success. Tried the program of "Fix - It", which has identified an error with the sound system, but said that he could not fix it. Restored to an earlier date but still what system did not go. Tried to uninstall and reinstall the driver. Uninstall was successful but reinstall it read that the hdaubus file does not exist. I'm a computer dunce. Any help out there?
Hi BarbaraWolfe,There are many causes of Code 39 errors:
- A required device driver is missing.
- A required binary file is corrupted.
- There is a problem with the file I/O process.
- A driver that refers to an entry point in another binary file cannot load.
Re-install the driver by downloading it from the link given:Additional reference on:Check if that helps. -
Original title: Add/Remove components error and DVD driver error
Yesterday, I removed several components of windows to attempt to clean my cpu. After the reboot, I noticed that my DVD drive disappeared. I tried to update the driver but told me I have the most updated version, I uninstalled and reinstalled the drive, but I still get the same error. Under Driver Details, it shows that I have a lot of drivers for my Phillips DVD player. However, the status of the device is the following: Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) Click Troubleshoot to start the troubleshooter for this device. I've done the troubleshooting, and the two options has not fixed the problem.
Then I tried to add windows components that I removed, thinking maybe that was the problem. However, when I try to add them, I get an error message that says: 'Setup cannot copy the file zClientm.ex_' it shows the location of this file as being in windows/i386, and of course, the file is located in this folder. So when I go to browse to locate the file, I find and click on it to open it, but I keep getting the same error message that the file is not found and Setup cannot continue.
I realize that this problem seems very rare and weird, but any help at all would be appreciated. Thank you.
HelloCode 39: Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)Explanation of error codes generated by the Device Manager in Windows XP Professional http://support.Microsoft.com/kb/310123Method 1.
Microsoft Automated Troubleshooting Services scans your computer and detects that the root causes of common problems, then automatically solves the problems that he finds and offers additional resources if the problem is not resolved. Click run now in the article below.Your CD or DVD drive cannot read or write media
http://support.Microsoft.com/GP/cd_dvd_drive_problemsMethod 2.
Also, try the methods listed in the section below and check.
Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.Microsoft.com/kb/982116I hope this helps.Thank you, and in what concerns:
Shekhar S - Microsoft technical support.Visit our Microsoft answers feedback Forum and let us know what you think.
If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly. -
Original title: the answer useful?
Help, please! Windows cannot load the device driver for this hardware (HL-DT-ST DVDRAM GH40F SCSI CdRom Device) because the driver may be corrupted or missing. (Code 39)
Hello
Code 39 means that the driver is corrupted or missing.
Please make all below even if you have done some before as it is often the set of operations which solves
the question.Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
This will refresh the default driver stack. Even if the reader does not appear to continue below.
Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitTry this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtmlYour CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.--------------------------------------------------------------
Also check with your system manufacturer to see if there are any updated drivers for your DVD. Or even if it
are you can reinstall the 'old'. Many use Windows default drivers however some special aura
ones. Also check the website of the manufacturer of the car.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)
Hello
Have you tried to update the drivers as suggested by Basith M?
Method 1:
You can run the fix provided in the link and check out them.
Hardware devices do not work or are not detected in Windows
http://support.Microsoft.com/GP/hardware_device_problems
Method 2:
You can also try the procedure described in the link to troubleshoot driver issues.
Tips for solving common driver problems
http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-driver-problems
See also the proposal contained in the link and check.
On a Windows Vista-based computer or on a Windows Server 2008-based computer, the Microsoft ISATAP map appears with a yellow exclamation mark next to it in Device Manager, and you also receive an error message
http://support.Microsoft.com/kb/932520/en-us -
Original title: this device does not work properly because Windows cannot load the drivers required for this device. (Code 31) in graphics AMD - 8151 HyperTransport (MC) AGP3.0 Tunnel
This device does not work properly because Windows cannot load the drivers required for this device. (Code 31) in the graphics AMD - 8151 HyperTransport (MC) AGP3.0 Tunnel, what do I do to fix this help please.
Jake
Hey Jake,
Follow these methods.
Method 1: Follow these steps:
(a) restart your computer if you have not already done so. There is always the possibility that the error Code 31 that you see was caused by a temporary problem with Device Manager. If so, a simple reboot can solve the Code 31.
(b) have you install a device or a change in the Device Manager, just as the Code 31 error appeared? If so, it is very possible that the modification caused the Code 31 error.
(c) cancel the change if you can restart the computer and then check again the error Code 31. Depending on the changes, some solutions may include:
Remove or reconfigure newly installed unit.
Restore a version prior to updating the driver.
Use system restore to undo the Device Manager recent related changes.
http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions
(d) to remove the registry values filters upper and lower. A common cause of errors in Code 31 is the corruption of two registry values in the class of the CD-ROM/DVD-ROM drive registry key.
Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following link. http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry
Method 2: Update the latest graphic drivers.
Updated a hardware driver that is not working properly
-
Original title: CD/DVD drives do not work after upgrade from XP to Vista
I upgraded my dell E521 to Vista dimension, but now finds that none of the CD/DVD drives work. I also tried two external drives, same thing. I downloaded the new drivers for the internal disks and when I tried to install the windows said they already had the best drivers. Both drives are TSST - I get device status "windows cannot load the driver for this hardware device. The unit may be damaged or missing. "I want to upgrade to 7, but can not run the dvd, and apparently MS has no download available if you purchase cd! Am tearing my hair!
Hi krt2,
In general, the error can be caused by a missing required device driver, a required binary file is damaged, if there is a problem with the process I/O file, or if a pilot that makes reference to an entry point in another binary file which can not load
You can try to uninstall and reinstall the driver for the device to solve this problem.
Step 1: Uninstall the CD/DVD driver. Follow this step to do the same thing:
a. click the Start button, select Control Panel, click System and Maintenance and then click Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
b. expand CD-ROM/DVD-Rom drives-> right click on the device, and then click Properties.
c. on the device properties dialog box, click the driver tab, and then click on uninstall.
d. restart your computer.
Step 2: Reinstall the CD/DVD driver by visiting the manufacturer's Web site.
See the links below for more details on the update of drivers:
Updated a hardware driver that is not working properly
Also, read the following article and check if that helps.
Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.Microsoft.com/kb/982116
Hope this information is useful.
Jeremy K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you thinkIf this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
(KEYBOARD ERROR)
Windows cannot load the driver for this hardware device because a previous instance of the device driver is still in memory. (Code 38)
Hello
I don't know how it happened.
I tried unistalling the software but have the same problem when connected to e
Help, please
Hi Davedirect,
· It's a wired keyboard or a wireless keyboard?
· Who is the manufacturer of keyboard?
· Since when are you facing this problem?
· You did changes to the computer before this problem started?
· Have you tried to restart the computer and check if the keyboard works normally?
However, you can try to uninstall all the previous and software drivers installed for the keyboard by following the steps below. More later, restart the computer and install the latest drivers and software and check if that helps you solve the problem.
Step 1
Remove the drivers from the computer. To remove the drivers to follow the steps below:
a. Click Start and enter the type of search box of start of the press and "appwiz.cpl".
b. in the programs and features window select the keyboard software installed on the computer and uninstall the drivers.
Step 2
During the uninstallation, the device in the Device Manager, make sure that you follow the steps below:
a. Click Start.
b. access control panel > system > hardware > Device Manager.
c. open Device Manager and expand the keyboard device.
d. right-click on the device keyboard and uninstall the device.
During the uninstallation of the device in Device Manager, make sure that you place a tick against 'delete the driver for this device '.
Step 3
Also, you can try to update the drivers for your keyboard from the Device Manager and check if it helps. Access the link below and follow the steps to update the drivers.
Access the link below to learn more about the error code 38:
http://support.Microsoft.com/kb/310123
I hope this helps. Let us know the results.
Thank you and best regards,
Srinivas R
Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
I get this error message "this device does not work properly because Windows cannot load the drivers required for this device. (Code 31) "via a wired connection. And that's the Microsoft 6to4 adapt #7 and the same card but the #4 one. Are these drivers or another file that I could use DL?
Hi JasonBedgood,
1. Once you get the error message?
2. did you of recent changes on the computer?This error occurs if the required driver is not installed or the driver is damaged.
I suggest that you update the driver for the device and check.
How can I update the driver for network card on the computer
1. click on Start, click Control Panel, and then double-click System.
2. click the tab hardware , and then click Device Manager.
NOTE: If you are prompted for an administrator password or for confirmation, type the password, or click continue.
3. click on network adapters to expand.
4. under network adapters, double-click the entry for Microsoft 6to4and then click driver .
5. click on Update driver software.
6. follow the Wizard update software driver to update the driver for NICs .Updated a hardware driver that is not working properly
http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctlyIf the device driver update did not help then check the link below for one of the thread with the question and try the steps mentioned by Lionel Chen on January 9, 2008
http://social.technet.Microsoft.com/forums/en-us/itprovistahardware/thread/3a503cdb-e61c-44BC-97c4-0b38b0e5f929/I hope this helps!
Halima S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think. -
Dvd/Cd ROM code 39 drivers. Windows cannot load the driver for this hardware device
Have Windows 7. HP Pavilion p6714y. The drivers are updated but cannot load the unit.
Hello
First, try the automated Microsoft fixit at the link below.
Then, in the Start Menu, open Control Panel and click Device Manager. Click to open the CD/DVD-ROM drives. Right-click on the drive and choose uninstall. Do not delete if requested drivers. When the device has been uninstalled click the icon 'Search for hardware changes' (usually just below help in the toolbar). Let windows reinstall the disc and see if it works now.
Kind regards
DP - K
Maybe you are looking for
-
What is disc optical drive firmware update for?
Please can u tell me what is this update for? * Firmware update *.* This firmware solves some problems in the optical disc drive *. What is meant by the optical disk drive? Thank you
-
How can I remove the button from the SPACEBAR on Satellite L350?
I have a brilliant nine of Satellite L350, and a few drops of orange juice got splashed on the lower part of the keyboard.The keys are all very well, except the space bar. While this works, there only 'click' when pressed.Now I don't know if it's goi
-
The day before I had defragment the hard drive and do a "Disk Cleanup" after many months. Laptop was significantly faster. Then, there was an automatic update of Windows and now the laptop is extremely slow. Any suggestions as to what I should do
-
Port forwarding Cisco RV042 / RV042G
Hello We use three Cisco RV042 small business routers. The problem: We want to send HTTPS Wan-side to a port other than 443 side Lan. For example: 217.44.55.66 Wan port 443 to 192.168.0.5 port 5001 There is only this option in RV042: Forwarding-> Ser
-
XPS M1530 with new SSD will not identify adapter WLAN 1395
I just bought a new SSD 128 GB for my old workhorse XPS M1530, installed a clean VISTA Ultimate 32 bit OS since the original DVD supplied with the laptop. Everything works except the wireless 1395 adapter. I know that the material of the wifi card i