Pages 5.6.2 switching column numbers between sections

Similar Questions

• the list of numbers between two columns

  Hello
  
  I need the list of numbers between two columns.
  
  My source table contains the intervals with different ranges and I'm currently thinking dividing them by size.
  
  I was able to get a solution following the information contained in the Web page:
  http://StackOverflow.com/questions/3971981/get-list-of-numbers-in-between-two-columns
  
  The solution I've used is based on the following example:

  with t as (   
    select 10 startnum, 15 endnum from dual   
    union all   
    select 18, 22 from dual   
    union all   
    select 10000, 19999999999 from dual   
  )   
  select lvl   
    from (select level lvl  
             from dual  
          connect by level <= (select max(endnum) from t)) a  
    where exists (  
       select 1  
         from t  
        where lvl between t.startnum and t.endnum ) 

  But this doesn't work in my table if I have few and modest intervals (maximum 5 digits range).
  In the example, I was trying to understand why this might be failing, but I do not have a conclusion yet.
  There is something I noticed and that I try to understand, that is:
  If I change this query to:

  with t as (   
    select 10 startnum, 15 endnum from dual   
    union all   
    select 18, 22 from dual   
    union all   
    select 19999999990, 19999999999 from dual   
  )   
  select lvl   
    from (select level lvl  
             from dual  
          connect by level <= (select max(endnum) from t)) a  
    where exists (  
       select 1  
         from t  
        where lvl between t.startnum and t.endnum ) 

  It will increase from 2 to 3 seconds to return results to a few minutes at least (canceled after a few minutes!)
  
  Thus, using this example to understand if my problem is related to having many between start and end number or if it is linked with having small intervals between large numbers.
  
  Can someone explain to me why I have this speed of different treatment depending on the value of the interval? And why it takes longer with the small interval?
  
  I need to apply it to different beaches (from 2 ranges of numbers to 16 range) and in all ranges, I will have small intervals to check.
  
  For example:
  endnum startnum
  7341 7342
  7422-7423
  7439 7456
  
  2522200050 2522200054
  2522200146 2522200150
  
  4216969839880 4216969839884
  4216969839893 4216969839897
  
  Having this problem I can only ask the first values I have in the picture!
  
  Best regards
  Ricardo Tomas

  Hi, Ricardo,

  Here's one way:

  WITH       cntr     AS
  (
       SELECT     LEVEL - 1     AS n
       FROM     (
                SELECT  MAX ( endnum - startnum)     AS max_diff
                FROM    t
            )
       CONNECT BY     LEVEL <= max_diff + 1
  )
  SELECT  startnum + c.n
  FROM     t
  JOIN     cntr  c      ON   t.endnum  >= t.startnum + c.n
  ;
  

  In your original query, you generate all the numbers from 1 to the highest endnum. You only need enough numbers to cover the range of startnum to endnum. (This method also works if startnum is less than 1).
  Joins are usually faster than EXISTS subqueries.

• Numbers between two columns

  Hello

  I would like to create sequential numbers between these two columns of the specified table.

  Existing data in the table

  Column1	Column2
  5	7
  13	14
  18	19
  24	27
  29	29

  power required:

  5

  6

  7

  13

  14

  18

  19

  24

  25

  26

  27

  29

  Could someone help me with this please.

  Thank you.

  XQUERY solution:

  with

  data in the form of

  (select 5 Column1, Column2 7 Union double all the)

  Select 13,14 in union double all the

  Select 18,19 Union double all the

  Select 24,27 Union double all the

  Select double 29,29

  )

  Select n

  data,.

  XMLTable)

  "xs:integer ($s) at xs:integer ($e).

  passing of Column1 as "s",.

  Column2 like 'e '.

  columns

  path number n '. »

  )

  /

  N
  ----------
  5
  6
  7
  13
  14
  18
  19
  24
  25
  26
  27

  N
  ----------
  29

  12 selected lines.

  SQL >

  SY.

• alphabetical sorting for a document of 4 column numbers

  Alphabetical sorting of the 1st column of a 4 column numbers Doc - given in columns 2, 3, & 4 needs

  to stay with the data in the 1st column.

  Select the context menu in the header of the column A by clicking on the arrow to the right of the 'A':

  

  Now select "Sort Ascending" or "descending".

  

• I want to run a vi that has a switch that passes between when run in vi It gives meeesage the highest level VI stopped for the unknown

  I want to run a vi that has a switch that passes between when run in vi It gives meeesage the highest level VI stopped for the unknown

  What should do?

  bisso92,

  You must be more specific...  When you say that you want the cover to be visible when it is called, I suspect you mean sub - vi.  You can go to the menu:

  File > properties VI then select the appearance of the window, followed to customize and select "display panel when called.  You can also select close thereafter, while initially closed.

  There are other "tricks", such as the incorporation of secondary school within your main VI, in this way, you can see both.

  Normally, a hand VI (or main function in other languages), would still present so that the operator can perform other operations.  If so you should look at using a Structure of the event with a producer / arrangement of consumer, where the consumer in a loop has the case structure where the sub-vis.

  To learn more about LabVIEW, I suggest that you try to watch some of these tutorials.

• How warns we reconnect when switching in demand between different module in 6.1.1.1.11?

  How warns we reconnect when switching in demand between different module in 6.1.1.1.11?

  Please, help me to understand this or fix it?

  Be sure to check that your containing remote access service is running. If it's not, restart the service and if it breaks down again, check the event logs.

  Ensure that the AuthenticationBridgeService is enabled in your EnvironmentSettings.config, and the user to remote access container is configured by using the SetupAssistant.

  
           
                 
           
          
           
               
  ....
  

  If the remote container Service fails, please contact Support with precision since the event logs.

• Hello everyone, I'll try to find the page with all adobe cs2 serial numbers! can anyone help?

  I try to install cs2 and for some reason, it cannot find the page of adobe with all serial numbers to install! is - can someone send me a link etc?

  They are available through the same page where you download the CS2 software that works with them.

  Error: Unavailable activation server | CS2, Acrobat 7, hearing 3 -.

  l http://helpx.adobe.com/x-productkb/Policy-Pricing/Creative-Suite-2-activation-end-Life.htm

  If you try to install your own copy that will not work.  You need to get the files from the link above.

• Change the Page numbers and Sections in a book once it's underway?

  CS5.5

  10.6.8 MacBookPro

  I'm working on a book of 450-500 pages with 4 chapters, 150 + images full page of text, end and beginning of information (title page, preface, introduction, table of contents, annexes, glossary, end notes).

  I booked three chapters using the InDesign book feature, now works on the bits before and end and a final chapter (actually Chapter 1).

  I watched the excellent video of Michael Murphy on the feature of the book, and it adds the page numbering and sections before he created the model. I make them after I have chapters in the book.

  A question:

  How can I add a separate paging once I have booked several chapters?
  I also want to add an article and before any style i, ii, iii, etc., and after 1, 2, 3, 4, etc.

  Second question

  How can I add the title of the book to all the pages in the left hand and the title of the chapter on the right pages now? I've never done it in InDesign, and my attempts after reading aid do not work even on a chapter outside the service book. In the book feature, I don't know yet how to start.

  Thank you very much!

  A question: same thing if you are working on a single document to create a doc of island new section where you want and adjust the figures. Numbering book will adjust when you synchronize the numbers in the book panel.

  Two Qusruib: put this stuff on master pages. Title of the book is not likely to change from page to page, then type this information in a text block. To the chapter title, use a running Header Variable (see variables in the help).

• Adjust the column widths in the pages by using the 3 column template

  In CS4, I load the value default 3-column HTML Template (3 liquid column, header and footer). I make a few changes to the size of the container, some background colors in the sidebars, each of the three columns make editable (I put in each column value, then use Insert, model of combo box object).  I have to save it as a TPL file.

  I then create a new HTML page using this template.

  I want three columns - but I want to vary the width of them.  I try to edit the css for .thrColLiqHdr #mainContent for example, but get the message "this change should change the code which is locked by a model or a translator. The changes will be rejected. "I have quite a few pages that need three variable columns.  How can I make this work?

  And a second question... when I open 3-column model mentioned above, the central section 'main content' starts lower down that two sidebars - how do I "pull" it upward with the other two and to avoid the two supervised a fall?

  Sample modified TPL file attached as a .txt file.  The system did not like downloading a TPL file, even if it is not listed as a banned file type.

  You want each individual page to have editable column widths?  You would have to do that in this way-

  1. move the editable region in the head of the template UNDER the embedded CSS

  2. record the model and this change to propagate to your pages

  3. on each page of each child, incorporate a new stylesheet in the editable area in the head to set the column to the desired width

  Simple as pie.

• numbering and section options

  Hello forumers.

  IM after a tut and im making the option of numbering and section.

  im a page I have first of all to the wide, and choose a style.but when I click ok, the pages do not change, but continue to be labeled 1 2 3 4 5 6

  Well that allows for example ive chosen for what they are in Roman numerals to say page 8 and beyond.do I need to change smthing in my preference, perhaps?

  Thank you.

  More than likely. You have two options in Prefs representatives how page numbers appear in the list of the Panel and navigation: absolute or Section numbering. Absolute show pages in a linear sequence N - 1, Section numerotages contains the number assigned to the page. Numbers on the pages themselves STILL shows the assigned number, regardless of the choice you make in the prefs.

• Numbering in section header

  On a master page, I need to the section number and title of section to display in a header. I'll set up a model for a document with multiple sections and make the transition from Word to InDesign templates has been a bit a break.

  I created a text variable to my heading 1 style and used in my head to show the title of the section. For the number, all I could think was that I need to use a section marker character in the header and had to manually specify in the Section marker box in my numbering and section options window.

  (1) is the only/best way to accomplish this task?

  and while we don't talk to the window...

  (2) never enters the Section prefix manually the only/best way to get the section number to show in my footer page numbers?

  

  ID's running header text variables will not capture the digital portion of numbered list paragraphs. Will of the substances. The important difference here.

  Thus, for example, if a paragraph contains the text "Section 1" literal or 'Act I', then a variable header paragraph-based running would display Section 1 or Act I. The author would need to manually enter the appropriate text. While the sections can be moved in a document that a diligent observation of maintenance, it is rare that the acts and scenes from Shakespeare are rearranged.

  HTH

  Kind regards

  Peter

  _______________________

  Peter gold

  Know-how ProServices

• Add a column to the Section

  Hi, I would do the following:

  In a specification of Prodcut-> tab related specifications, I would like to add a column on the section of the Alternative standards.  Currently, the section shows # Spec and Spec - I want to add a column for the classification.

  I looked through some of the extensibility documentation, but didn't notice anything to do something like that (it's probably there somewhere and I just lack).  Can you please give me an example or point me in the right direction on this?

  Thank you

  Hi Mike,.

  We currently have is not an extension of available column add new columns to this section. Feel free to save a value for this application.

  However, you can add the collation of the column name of the technique, if you wish. To do this, you must create an extension of FormatPlugin by using the AltGlobalStandardIdentityPlugin extension point. Your plugin would return the classification (and if you want that the State continue to be displayed, which also include).

  See the PluginExtensions in the ExtensibilityPack in the ReferenceImplementations\PluginExtensions\Documentation folder and read the hardware section identity Plugins and the section called create and deploy a new Format Plugin. This will also guide a simple reference implementation. You can also see the complete source code in the ReferenceImplementations\PluginExtensions\SourceCode\ReferencePlugins\ folder. This Visual Studio contains example FormatPlugins for you to review.

  You will need determine if the classification should also appear on the printing specifications. If Yes, then this is just additional method (and interface) to implement, but documentation shows that.

  Kind regards

  Ron

• Cannot use scroll effects in Muse so fluid mode, each page can cause different fluids on the fixed sections?

  Cannot use scroll effects in Muse so fluid mode, each page can cause different fluids on the fixed sections?

  Example: I have 4 pages and alone is fluid and the other are fixed?

  Yes, you can have effects from scrolling on a site which is partially adapted to the needs, as each page is independent of the others. Muse only disables the effects when you add a breakpoint to a page.

  David

  https://creativemuse.co

• Not switching devices not between the bases of the airport?

  Hi all!

  I write because that through my research, I have not found quite the answer.

  I have 5 Airport extreme (AP) in my house. One of them is connected to the ISP (this also ISP DHCP box) box. All of them are set up to extend wifi as a long string.

  The problem I have is that I can't connect the AP via ethernet, creating a network of "roving". Is it possible to approach but?

  Because currently my devices switch base station that I propose. If I was connected to the AP1 and I'm still in the range of it, I don't connect at the base next to me (which has a faster speed of the internet) and my connection is slow/drops.

  Is there a solution?

  Thank you!

  Best

  Alex

  The problem here is that wireless between the airports will not quite work... If they work at all.

  You have a 'main' AirPort Extreme connected to your ISP modem/router using an Ethernet cable, and the airport is to 'create' the main wireless network... is that correct?

  And, you want the other 4 airports to extend wireless signal from the 'main' airport... is that correct?

  If so, then all the following 'rules' must be applied:

  (1) your 'main' AirPort Extreme must be at the heart of your home

  (2) each airport expansion must be on the same distance from the AirPort Extreme

  (3) each extension airport should be located, as it is closer to the 'main' than any other Airport Extreme AirPort which is the extension of the network

  The reason is that Apple offer wireless are works such as the hub and the spokes of a wheel.  AirPort Extreme 'main' would be 'hub' and each of the 4 Extenders would be located at the end of the separate 4 "rays". In this way, each extension connects directly to the 'main'... airport which is the only way an airport can extend wireless network.

  In other words, you cannot "extend" the network several times. Although you can have multiple extensions, each of them must be connected directly to the "main" airport  They cannot connect to another airport that extends the network already and lay it again.

  So, please tell us how well your current configuration meets the 3 above for a comprehensive wireless network.

• How can I convert a Pages document to a document of numbers

  I have a document Pages which is a continuous document that contains e-mail addresses separated by semicolons (;).

  I would like to change it to a numbers document so I can sort the addresses.  It is quite a large list.

  Thanks for your help!

  Copy the list and spent in a TextEdit new document, where it is somewhat easy to do the necessary replacement below.

  When the list is open in TextEdit, press Command + F to open the Find dialog.

  Click in the box, type the colon unique semi (;)

  Select the check box replace

  Click on in the new area (replace) option-return type (press the option key, press the return key)

  Click ALL

  Copy the now vertical list.

  Open a new document numbers.

  Click (once) in the cell where you want the list to start.

  Dough.

  Kind regards

  Barry

  PS: You'll find TextEdit in your Applications folder, or click the magnifying glass to the right end of the menu bar and type "textedit" in the search bar that opens.

  B