USB 2.0 on the Satellite 5100 603?

Hello

I had to reinstall my laptop with the original recovery CD
on Windows XP Home Edition. I ran the updates.

Because I used several USB devices, the system tells me that
I have to connect this device to a USB 2.0 to get the fastest
connections.

I'm sure that I've never had these messages before.

Does not support my 5100-603 improved USB?

OR

What drivers should I download and where?

Thank you for your help in advance.

Oliver.

Hey Oliver

These messages are nothing unusual if you connect USB 2.0 devices to broadband to a laptop with USB 1.1 port.
Yes, as much as I know Satellite 5100-603 supports only USB 1.1 and not 2.0 USB ports
This is a limitation of the phone hardware and may not be updated with all the drivers.

I imagine that get you t has not all messages in the past because Microsoft QFE updates were not installed.
In any case, nothing wrong in you unit.

Tags: Toshiba

Similar Questions

  • Replacement of motherboard on the Satellite 5100-603 - BIOS update is required?

    Hello
    I just replaced a dead card main satellite 5100 603 with a new main Board which I could get on ebay (Toshiba card system FNZSY2 - A5A000160010 P000341750-Ref.). If I boot with an installation of XP DVD it starts but hangs with the message "unexpected error (536674392) on line 1768 in D:\xpspi\base\boot\set-up\arcdisp.c".

    I realized that there are versions of different bios for various models 5100 satellite. I think I flashed the bios of 5100-603 last for this problem.
    Is this correct? (start with BART-PE from CD or HDD BART-PE raises the same error msg text in another look)

    Hello

    to get your motherboard to work you must write about the UUID (Universal Unique Identifier).
    As far as I know, you can get the UUID to a Toshiba service partner writing tool.

    Good bye

  • HARD drive failed on the Satellite 5100-603 - PXE - E61: Media test failure, check cable

    Hello

    my laptop enter to the BIOS and tell me 'Intel (R) Boot Agent Version 4.1.03 Copyright (C) 1997-2002, Intel Corporation.
    PXE - E61: Media test failure, check cable
    PXE - B0F: Exit Intel Boot Agent.
    Insert system disk in drive.
    Press any key when ready... »

    and I started to install windows, it tells me 'hard disk without work... '. »

    Help me please

    Hello

    Sorry but I don't understand what kind of help you want. If the HARD drive is faulty, you should exchange it.
    Moreover, what model of laptop do you have?

  • Satellite 5100 603: where to find a new graphics card?

    Hello

    I am currently the owner of a Toshiba Satellite 5100 603. The problem is the video card. But I can't find a new or second hand video card for this laptop anywhere.

    Anyone has suggestions where to look for this card or maybe has a replacement part or with the problem I described a few lines (lines and twinkle in your screen) back.

    Try eBay. You will find lots of laptop parts. Google a bit. For new parts is no problem to find them but second hand parts

  • NVIDIA 440go graphics update map satellite 5100 603

    Hello
    Take full advantage of my laptop to the game and seems to address most of the games, but graphical technology moves.
    I want to update the graphics card from nvidia on my satellite 5100 603. Can anyone recommend a card appropriate to upgrade with (for mobile).

    [Edited by: admin on 11 February 06 20:37]

    Hi Alison

    Many users of this forum asking for updates of graphics options. I must tell you that the upgrade is not possible. The graphics card on the laptop is different, like on the desktop pc. It is a small chip that attaches to the motherboard.
    Unfortunately, it is not possible to s.

  • Working on the Satellite 5100-201 remote control?

    Hello

    I have a Satellite 5100-201 und I bought an original toshiba remote for the 5200-801. But it Don t work in my laptop, I install a driver? or it is not compatible with my laptop?

    Sorry for the bad English, I m of the Germany and do my best.

    André

    Hello

    When you purchased your portable Satellite didn t you get a remote control? If this isn't the case, then the unit is not ready to use the remote control. You can also refer to the manuals of s.

    AFAIK all units with remote installed a small application called controls. Check in Control Panel if you can find something like that.

    Good bye

  • Toshiba Satellite 5100 603

    Instruction for Satellite 5100 503 says max. capacity of RAM this laptop can work is 512 MB. It is strange to me. Why I can't upgrade memory in my book, it's efficency, but 512 MB is too little for me. I use Windows XP Prof. with many programs, that's why I need of more memory. Additional distributor of Toshiba laptops in my country clamis that this model can work with 1 GB of RAM. I don't know really who right. Help me, please.

    Hi emifer,

    This Machine can run up to 1024 MB of Ram (RAM-PC2100DDR)!
    For Toshiba 512 MB Ram order Code is PA3164U.

    Good bye

  • Display on the Satellite 5100 503 problem

    Hello

    I have some problems very very big

    block to this video http://mitglied.lycos.de/hausandy2/MOV08630.MPG and tell me what I can do. I Don t know what is happen.

    If I need a new graphics card where I can get and expensiv how...

    Please help me I need my phone

    Please test with external screen and display the result.
    Anyway, the laptop must be sent to the service partner.

  • Lack of BIOS on the Satellite 5100 201

    HY there. I have a laptop Toshiba S5100-201 with MODEL NO.:PS510E - 01CZ5-G3.

    The bios is missed, but try to boot from a hard disk. I don't have bios fing in the toshiba homepage. If please send me by e-mail, or paste herer a link.

    Thenks very much.

    Hello

    AFAIK BIOS cannot be simply downloaded to update the BIOS. In my opinion you need professional help and you should contact the closest partner in your country.

  • Differences between Satellite 5100-201 & 5100 603

    Hello

    The user guide is not clarify the differences between the models S5100-201 and S5100-603.
    I can work on them are different speeds, memory and hard drive, but what about the internal bits?

    I have a model 603 broke with a power control fault. Does anyone know if a model-201 motherboard will enter unity of 603?

    Thank you
    Pete

    Hello

    I am not a technician, but I found the info that these units have a different graphics card and the two can't handle with RAM max.

    Satellite 5100-201:
    -nVidia GeForce4 440Go 32 MB
    -can handle with max 512 MB RAM

    Satellite 5100 603:
    -nVidia GeForce4 440Go 64 MB
    -can handle with max 1024 MB of RAM

    I'm not 100% sure, but if you swap the Mo together with all hardware, I think that other devices should work, but I put t know how it will work with the BIOS. Maybe the DMI should be rewritten.

    There are little guys having very good knowledge on this forum, and I hope that some of them will be post here and say more about it.

  • 5100 603 and USB 2.0?

    Is the Satellity 5100-603 a usb 2.0? I have XP with SP2. I keep invites when I add a USB hard drive message "this device can perform faster. If yes where can I get an updated driver.

    Thank you.

    Hello

    According to my information the 5100-603 a USB 1.1

    BR

    Tom

  • Satellite 5100 - Question about dead pixels. Is - this really dead pixel problem?

    Hello

    I've got Satellite 5100 603. There was a few pixels on the display. I don't know what is really dead pixel problem or not because the black area appears to be behind the screen. When I move the left and right sides, the black area move too much left and right (as if the black box is behind the pixels of the screen)! And I can say that all the pixels work OK when watching from the sides right and left of the screen (because the pixels that appears to be dead, changes in search of different angles).

    Are there really dead pixels or is it another problem?
    Can I do about it?

    FYI, I use my laptop for 2,5 years and there is no guarantee of course...

    Thanks for any help...

    Hello

    Because of your description, it is not easy to give you a proper answer. On my old laptop, I had two dead pixels and it was easy to see the boot process. At the beginning, you can see home screen Toshiba and dead pixels are usually green (the background is black).

    Sorry but there is nothing to do. You have to live with it because the display is very expensive.

  • Satellite 5100 503: engraving of a 800 MB CD

    Hello

    Maximum capacity of a CD in the drive DVD/CD of the Satellite 5100 503 combo seems to be 703 MB. Is there a solution to burn CD 800 Mb / 90 minutes?

    Thank you

    Hello

    you want to burn a CD 800MB real or you want to overwrite it?

    Did you check whether a new firmware is available?

    What OS and burning program are you using?

    Goodbye, Sam

  • Satellite 5100 501 and installation of Vista

    Hello!

    Is it possible to run Vista Business on 5100-501? No problem with drivers?

    WBR

    I can't say for sure if this is possible or not, but I know with certainty that the Satellite 5100 is not Vista supported for laptop and Toshiba will not offer a Vista driver for this older model laptop.

    If you test it please report results.

  • Satellite 5100 - error code: 4 short Flash, 1 x long, 3 short films

    Hi all

    After I accidentally served Coke for my satellite 5100 503, it was totally cut off. My brother managed to clean it up, and it began. But shortly after, she turned to and just give this error message by flashing the power before conduit: 4 x SHORT 1 x LONG, 3 x SHORT

    I managed to interpret it using some web sites. This is a 10: 00 hex code and means: 'AC output voltage adapter's more than 16.5 V.

    And here's what they recommend, if the adapter is ok (and it is, I checked):

    After checking the connection, follow these steps:
    Check 1
    Replace the AC adapter with a new one. If the adapter does still not work, try 2 check.
    Check the box 2
    Use a multimeter to make sure the F8800 fuse on the motherboard is not blown. If not, the fuse is broken, go to 3 check. If the fuse is broken, go to test 6.
    Check 3
    Use a multimeter to make sure the F1000 fuse on the battery tray is not grilled. If not, the fuse is broken, go to 4 check. If the fuse is broken, replace the battery with a new one by following the instructions in Chapter 4.
    Check 4
    Make sure battery cables Council are well connected to PJ8820 and PJ8821 on the system board and PJ1000 and PJ1001 on the map of the battery. If they are firmly connected, go check 5.
    Check 5
    The battery or System Board may be damaged. Replace it with a new one by following the instructions in Chapter 4.

    Do you think I should go ahead and change the whole motherboard? I don't think it is a fuse, because sometimes the laptop starts and stays on for 10-15 minutes before turning off. In addition, it does not work with the battery! Only the sector...

    Thanks for you comments, but I really wonder how did you find the error code mean?
    The Satellite 5100 has been delivered with the Toshiba BIOS!
    Please note that different BIOS provide different error codes.
    This means that the 10 h error code mean Phoenix BIOS, something different than the Toshiba BIOS!

    I recommend to contact the ASP in your country and ask the details of error code.

    PS: One of my friends did the same. Shake the glass of coke on the keyboard, and the laptop has been cut.
    New bad dude... the motherboard has been replaced.

Maybe you are looking for