Paint a black and white mask...

Similar Questions

• Why can I I see more black and white mask thumbnails in view levels?

  I think it's simple, but I have since the last update until 2015 for CC PS my thumb nails in levels discovered a mask appear more as black or white.  All I have is an empty circle inside a rectangle... I can't say when I paint on the mask I could before... What Miss me?

  See if changing the size of the thumbnails another layer panel None/No thumbnails arranged.

  Right-click on an empty area in the layers panel under the thumbnails.

  

• How to make part of the video in black and white and the other part in color

  Hello

  So I want to make this black and white video, but keep what inside the rearview mirror in color,

  I used the black and white masked effect around the mirror, but the only problem is that the camera then moves the mask b & w started out where I need it.

  can someone help me please on how to keep track on the edges of the mirror through the video clip of 30 seconds or more

  Thank you

  

  You don't say which version of the body you use, but in the newer versions, you use these tools to have body follow the matte for you:

  

  More info here:

  Masking and tracking in Premiere Pro

  MtD

• Is it possible to use a black and white video clip as a mask?

  It's kind of a strange question, so I hope I can explain it well enough.

  I made a black and white video clip in a 3D program to act as a mask for the correction of an area specific during the animation of the colors (rather than make many separate images and load each as a channel for each frame of the real animation). Is it possible to use video in Photoshop as you would with an alpha channel, or should it be done in After Effects?

  If she need After Effects, might well want to just point me in the right direction with regard to the basic steps required it? I'm not too familiar with After Effects, and I have not yet used its masking or monitoring functions.

  Thank you very much in advance for any advice.

  I think that I figured it, it cannot be done in Photoshop (correct me if I'm wrong well), but is easily done with a Luma mask in After Effects.

  Thank you.

• Collage of texture color to black and white in a layer mask

  Hi all

  First time poster long time lurker here.

  I'm pasting a layer of color in a layer to texturize mask a shape I've done, I've created. Whenever I have the Option + click on the layer mask and then paste the texture, it sticks in black and white instead of color, see capture below (forgive the watermark) of the screen:

  http://www.YouTube.com/watch?v=wC8Da4V0FAc

  Am I missing something here? Thanks in advance!

  If I understand correctly, layer masks are black, white or gray. Is that they hide or show parts of the layer according to the value of your gray of the mask. They are not in color.

• How to remove the unwanted parts of drawing black and white line

  I scanned in a flower art simple black and white lines.  I would like to remove some of the petals in Photoshop.  How can I do?

  Thank you

  I would like to remove the petals from the background.

  1 method: with the select magic wand the white bg, select-> invert the selection and create a layer mask.

  

  The layer mask is a monochrome picture, transparent black, white is opaque and anything in between is more or less transparent.

  You can now select the layer mask, use the brush and black paint, where you want to have something white, removed where you want to have something added. It is non-destructive and works very well on your photo.

  

  You can use shift click to 'draw' the small lines to attach to the top. According to the clarification, it will take more or less time. As I said are non-destructive.

  Second method: you use the pen to draw the lines around your flower vectors. With little exercise, you'll very quickly and you can always adjust the curvature of your curve, by pulling on the handles of the curve. Here you can see how it works: drawing with the pen in Photoshop tools .

  When done with the pen tool, you can add the vector line as a vector mask. You can even refine your mask after finishing. I suggest, since a mask of course work at a refined mask.

  The flower should not be on a layer, a background layer. Basemap layers have no transparency. The two methods are non-destructive, so you can return to the original image or parts of it, whenever you want.

• Anyone know how to make a splash of color to a black and white photo?

  Good so I scoured internet and I still have not found an answer to this question. All I'm trying to do is make one part of the image of color and the rest always black and white. The original photo I have is black and white and I would like to make this very clear: I don't want the entire image colorized. Yes, there is someone who really knows how to do this?

  This is a very common technique, because it turns out, and there are tons of ways to get there.

  Starting with brute force and back, create an empty layer above your B & W layer. Set the blending Mode of the layer of the Virgin of color.

  Choose the color that you want to work, take a brush (B) and go to town. The blending mode to show through values (grey levels). You can paint with colors you like on this mixed layer.

  If you use only a single color, but it may change from time to time (say by brand or something), to re-learn a layer of white, use a color fill layer (layer > new fill layer > solid color). In this case, you would add a layer of fill color, fill the black mask, and then paint with white on the mask to reveal the color.

  If you want to keep the original in one place color, replace the white layer with the color version and use the masking technique just described.

  Let me know if you need help on any of these details and I'll try to find some specific tutorials for you online.

• Colorization of black and white comics

  I have scans of pages of comics in black and white

  that I'd like to colorize.

  How can I do this with Photoshop Elements?

  (I, colleagues, I must first make transparent white parts)

  then add a layer for coloring behind the

  black and white layer. "But how?)

  (At the moment I use version 6.0 for Mac).

  Thank you.

  I'm a big fan of blending modes to do this. All you really need to know is that Multiply blending mode makes drop white.

  1. click on background comic lock and drag it to the trash CAN... simply release the mouse button when you reach the trash. I like to do it this way because there is no dialogue for good.

  2. create a fill layer with the background color solid color desired and slide it under your cartoon illustration. (I like to use for the solid color fill adjustment layers because they are flexible and I quickly change my color if I change my mind something.) This does mean that you can't just create an empty layer and fill it with the color... or works the other way. Let this layer in Normal blending mode; 100% opacity.

  3. change the blending mode of the layer of your illustration comic to multiply; 100% opacity.

  4. under your illustration add an adjustment layer of filling of solid color for each item that you want to paint. Let in Normal blending mode adjustment layers; Opacity 100%. Fill your black mask to hide the effect of solid color fill. Take the Brush tool and use white paint into the mask to colorize point.  Each of them that are under your comic strip illustration will be blocked by your black lines. Each layer will block the layer below, because they are each in Normal blending mode. (The exception is the black outline that is placed in blending mode multiply.)

  Note: Alternatively, you can create an empty layer and paint in your color. As with the solid color fill layers, leave it in Normal blending mode; 100% opacity.

  5. If you want something to paint on the black lines... like fixing the gaps or adding things... place these layers above your line art, which is in merger mode multiply. Let these layers in a mixture Normal mode 100% opacity.

  Note: in my example I lowered my opacity less than 100% for the single point... the lip lines. This layer, I had to taste that I tried to get my lines to match the lines of the demarcation line in the face.

  Below shows background color will not affect the result that you use the normal blending mode for each layer coloring and multiply blending mode for drawing to the line itself. If you had painted them in a different blending mode then the base color (background) would have been a factor.

  

  I used a piece of an image of the Big Box of Art 350 000 Hemera Images... now owned by Jupiter Media... for example. I thought I'd better add that since Jupiter Media owns the copyright of this illustration.

  

  Above shows my layers palette.

  All the layers except the linework are Normal blending mode. Line drawing is in merger mode multiply. All the layers except the outline of the lips (black) are set to 100% opacity. Are items I want to address the line drawing above the dividing line. I want to show under the line items are found under the line drawing. A good example is the layer of teeth Add. The teeth are not in the original comics. To get your teeth white to appear, they should be located on the line original line drawing. The layer that contains the fill color is one that I forgot to change. As he is black, it is a sort of correction of the line I've done freehand.

  I have not used any fill color for the necklace and the dress in my example to show how the white falls when you place a black and white linework in blending mode multiply.

• Tecra A6-EZ6411 - video photo is shrivelled and black and white

  After a recent update to Windows 7 I have a problem with the display of images in the Windows image viewer and watch netflix videos. I can look and onto my computer without problem. I can also display an image in paint.net or any other picture watching a program. I can watch Hulu or any other site of company of cable without problem. What is happening is that the image is overwritten and made black and white.

  So the first thing I tried was uninstall silverlight and then put it back. The next thing I tried was start in basic mode, uninstall all nvidia drivers, then reinstall the latest driver available. None of those corrected these problems. Strange thing is when I first start in basic mode and the resolution is 640 X 480 photos appeared normal in the Windows image viewer and when I try to watch a video on netflix seems normal. Only when I change the resolution to anything else he revert to the old diplay of a black and white display shrunk.

  Hey,.

  You have the same problem with the version preinstalled Windows from Toshiba or did he only because you have upgraded to Windows 7?

  I mean if it works with the screen resolution of 640 x 480, it could be the graphics card to malfunction but a problem of driver too so much easier is to install original Windows of the Toshiba recovery disc and it tests again.
  ?

• Photo gallery-photo black and white prints

  Photo gallery problem

  recently with Gallery of photos to print a photo it will print in black and white, not color?, but using the words & paint it will print in color using the same printer. Why?

  Hi YipJack if,
   
  -What happens when you preview the photo before printing the Photo Gallery?
   
  See the preview before printing:
   
  To see what the print will look like before you print it, open the picture in Windows Photo Gallery that offers a preview before printing. Print preview is typically located on the file menu. You can choose the print in preview mode options and then print directly from the preview.
  
   
  This happens usually if the print options or preferences are changed for your printer. To select print options, you must open the image you want to print. Most print options are located in the print dialog box, which you can access on the file menu in the program that you are using. The options that are available to you depend on the program and the printer you use.
   
  To access some options, you may need to click on the link 'Options' or 'Advanced Options' button or tab in the print dialog box. To learn more about the print options for a program, see the information for the program.
   
  Printing options are determined by your printer capabilities are called printing preferences and may include printing separation pages, color or image quality options and Staples. Like program options, printing preferences are displayed in the print dialog box. Look for the buttons labeled "Préférences" or "Properties". You can choose preferences each time you print a picture or preferences to default configuration to use for all the photos you send to a printer.
   
  Choose printing options

• 7520 do not print photos in black and white

  HP 7520, all new ink carts. I want to print only black and white photos crisp.
  How to change the setting to do this printer?

  I tried to change the grayscale function.

  There is a selection of black ink cartridge, but there is a yellow triangle next to him and he doesn't let me use it.

  I have supported HP Photo Creations, thinking that would help, but it's not.

  I tried to use programs Word and paint. on HP7530 and they were prefect.

  New printer fancy and I can get only black sepia.

  It's annoying because I was able to print black and white with my

  Please advise, thank you.

  UPDATE: I thought that maybe the replacement of the ink carts has not record.

  So I reinserted the black ink CARTS, and this has no effect on the Advanced Option to select black ink only.

  Windows 7

  Hello

  Please set default to use black ink:

  (a) double-click the desktop printer icon.

  (b) click on set preferences.

  (c) click on advanced.

  d select black ink only from grayscale

  (e) click on Apply/Ok out.

  Kind regards.

• How to switch the color to black and white photos

  I can't understand how to use Paint in windows 7... what I try to do is to pass a color black and white photo, please help me by telling me step by step what to do.

  Windows live photos did that ability on its edition tab section, in its effects options.

  I would add that it is almost to easy :)

  Select the photo and right click on and select Edit, click the edit tab section and there are 5 different effects you can put the picture in, select close file when your finished, you can make a copy of the picture first of all you will have both files.

  Your best do in paintings because he has a record under work, something has no wlpg.

• How to select the pieces of my image in black and white?

  How to select the pieces of my image in black and white? FOW example letter J or the circle or the two together?

  

  It's actually pretty easy, but I have to assume that you know a few basics in Photoshop

  (1) open your existing image

  

  (2) double click on the layer and the 'layer style' appears. In the mix if area set the sliders so the whites in the image disappears

  

  You will be left with just the black elements in design

  

  (3) duplicate layers

  

  and merge them together

  

  to give a standard layer

  

  (4) ctrl or cmd click on the layer to select and create a layer mask

  

  (5) you now have a mask of the image. Duplicate the layer, click alt or option, click on the layer mask to call

  

  (6) the blacks and the whites are not completely black and white for the use of levels to adapt to the absolutes

  

  (7) now you have to decide what you want to select. In this case, I chose the lettering and simply covered everything else to the top with black. You do this by lasso selection and fill and items when it's delicate brush just the details with a black brush "hard." .

  

  (8) at this stage, you can do what you want you have a layer mask. So you can color the text for example

  

  or place in a background color and apply a layer as Beveling effect

  

  Hope that makes some sense. It is much easier to do than to describe.

• Is there a convenient way to selectively apply the black and White Conversion?

  First of all, I know how to use the black and white adjustment layer and I am familiar with masking. What I want to do, it's something more complicated.

  When I convert a picture n & B, I often find that there are areas of the image that would benefit from a slightly different treatment than the rest. For example, I have a lot of foliage that I want to run by using the yellow and green Sliders, but maybe there's Green House which I want to clear up instead. Using a black and white layer adjustment I can't make this kind of decision as it effects the entire image. And other layers B & W setting on one has no effect because it has already been converted.

  My first thought was to use two different adjustment layers, one with a mask reversed on the other, but not only is it very clumsy (what happens when you need more of two sets of adjustments, but it always seems to be an area left along the border of the selected areas / unselected masks where some remnants of color.)

  Use B & W adjustment layer and mask areas that you want to assign. Set the blending mode to luminosity. then you can put a final above all convert to the true B & W.

  

• How to make a character in my color of black and white film? I need him to be able to walk in the scenes and be always green.

  I just finished a movie black and white, I did between a man and a dinosaur of edition. My problem is that I want to stay black and white besides than the dinosaur that I wanted to give a green tint to the entire film. The problem is that is not as simple as a work of photoshop coloring him because it's a moving character I want to stay green regardless of composition or how it moves through it. I tried to find a way to do two days but had no chance of having the character move and remain its color. I am a complete novice and lose hope so I hope someone out there understands what I'm asking. Help, please!

  Your rotoscoped character would be on its own layer. Then you'd just color grade this layer.

  Here are some useful tips on rotoscoping: using After Effects | Management and animation of masks and paths of the form