Palm TX handheld overrides and erases the calendar

Similar Questions

• Can I change amortization and distribute the calendar in the window controls of book?

  Hi all
  
  I use the FA module.
  I tried to find it on the documentation, but I found it. I need to know if I can change the depreciation and distribute the calendar on the book controls window?
  If it is possible to change this information, please tell me how I can do this, or if there is any option to profile for this purpose.
  
  
  
  Thank you and best regards
  Ernest

  Impossible to change depreciation and distribute the calendar at the level of the book, in this way is not taken in charge and I think that a hard-coded update does not work.
  If you change these, you must put in place a new asset book and migrate existing data in this book

• When I start my computer im presented with two windows xp options and im invited to click on one of them, I want to only being active and erase the other's

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  FWIW... It is always better if you include your question
  in the body of your message.

  Your Boot.ini file needs to be edited... you should know
  You can make your computer useless if you
  do not pay attention.

  Proceed at your own risk *.

  Perhaps the following goods range offers a few ideas:
  (Search Google will find much more information)

  How to remove both Windows XP Professional on the boot
  http://www.ehow.com/how_6945283_delete-Windows-XP-Professional-boot.html

  (289022) how to edit the Boot.ini file in
  Windows XP
  http://support.Microsoft.com/kb/289022

  How to use and edit the Boot.ini file in Windows XP
  http://vlaurie.com/Computers2/articles/bootini.htm

  Additional information and help with the boot.ini file.
  http://www.computerhope.com/issues/ch000492.htm

  Good luck...

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• BlackBerry BB Curve 8330 Smartphones and Palm Tungsten E2 - sync and use the Office to

  I have a new BB Curve 8330.

  Before I used a cell and a Palm Tungsten E2.

  I managed to export/import data from Palm to BB (via Microsoft Outlook).

  I thought that the Blackberry will be delivered with its software for calendar/contacts/tasks - but I see only synchronize with Outlook.

  I want to continue to use the Palm Desktop software and sync it on Blackberry.

  It seems that it's not possible.

  Is it?

  I have the habit of the Palm E2 and never used Outlook before. I like the features of Palm but BB does not work with it. Why does this work?

  Any advice would be much appreciated!

  Thank you!

  Taylor

  Hello

  You will not be able to use the Palm and Blackberry at the same time. BB does the synchronization only with Outlook. But the good news is that Palm will also sync with Outlook. If nothing is lost.

  Sync the Palm to Outlook, and then synchronize the Blackberry to Outlook. Continue to use Outlook. You will have no need of the Palm is useless since once you have all the info in your Blackberry.

  The functionality that a single out of the BB, it's that you don't have a portable documents, as it is in the Palm. I hope that manufacturers will think about fixing that in a couple of new editions to come.

  I love my Blackberry and it is easy to forget that it is so different from the Palm.

  If you like your Palm and can not get used to the BB then I suggest you get a Palm of Cingular ATT phone.

  is much larger that the Curve 8330 I have.

  I love my BB Curve 8330.

  I've learned it's pretty fast and I gave my cousin my Palm E2.

  Now, everything depends on how fast learner you are and how open you are to new.

  Good luck!

• Restore Windows 8 and recover the calendar

  I organized my calendar in Windows 8 to take account of my life, appointments of doctors and all.

  I did NOT ask for Windows 10, she was forced on me very rudely apparently by MICROSOFT. As I have not asked for it.

  I hate that they screwed up everything on my laptop.  In particular, I need my calendar which

  has completely disappeared in the screen options and can not be found.

  WHY WHY why they do for me.

  At the age of 68 and I not trying to reinvent the wheel and I am quite satisfied with WIndows 8.

  How can I restore my system to 8 and get my timing BACK.  Please, I beg you.

  I need for my meetings and doctors start TOMORROW morning.

  So it's useless and I want to prosecute these people to spoil important information that they

  NO RIGHT to do.

  Hello

  Thanks for posting your question on the Microsoft community.

  Thank you for details on the issue.

  I also like the fact that you want to restore a previous version of Windows (Windows 8) to return to your calendar application.

  I suggest you use the steps described in this wiki article created by Stuart W J 26 January 2015 and check if it helps.
  How to recover a previous builds or your original version of Windows by using the recovery or restore feature
  http://answers.Microsoft.com/en-us/Insider/wiki/insider_wintp-insider_install/how-to-recover-a-previous-builds-or-your-original/76b6750c-5bb2-40bc-a7e3-f03cec62338b

  Important notes:

  You may have to reinstall some applications and programs. You may lose any changes made to the settings after you have installed a previous version of Windows.

  I strongly recommend that you back up all your important files and folders on an external storage device before performing any type of BONE repair, upgrade or recovery.

  Additional information:
  Help calendar app
  http://Windows.Microsoft.com/en-us/Windows-8/calendar-app-FAQ

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• send email with attachments and change the calendar

  Hello

  2 questions,

  first how can I change the date picker icon? I want to use something a little cooler that I, for example an image of a calendar?

  the second question is a little more ocmplicated.

  I used the behavior of e-mail send only no prolems at all, but I need to be able to on an existing site, I used to build with measure doesn't have the ability to send documents that are uploaded by uninstalling behaviors in the site?

  so for the moment, that you can download, delete, and view documents. the documents are displayed in a repeating table, I need to be able to have checkboxes next to each selected documents and when name when the person clicks on the submit button it send the message with attachments to an address they specify?

  any help would be great.

  Thank you

  Hello

  the issue of date picker: I just found an interesting thread on the old Interakt forums where some users obviously have solved it by editing the file "includes/wdg/classes/Calendar.js" and here by changing the value of the "btnAttributes" javascript variable (which, by default, generates a standard button) so that the MEASURE will make a type of image - button.

  See you soon,.

  Günter

• The police recovered my IPAD the apple of the thief ID is necessary to access and put in place after clearing there how I could put up my iPad and erase the thieves apple ID

  I am on the page 'activate IPAD' in "set up your iPAD" after having deleted all the data with the restore option after that the police recovered my stolen IPAD the thief apparently put up my ipad with its own appleID and I am not deprived for the password how to regain access to my property and then I discover that , and what is the apple ID or belongs as a secondary concern?

  The police can act as your intermediary?  They are able to contact the thief on your behalf?  I would ask them unless you already know the answer.  Allow the police to try to unlock the iPad for you.

• you want to save the password disable and erase the password he saved.

  You want to disable the functionality each time asking me to save a password.
  I also want to change a setting so that he doesn't remember the password he saved when I hit the wrong button.
  How do I do that? Firefox 4.0
  Thank you.

  1. Click on the orange button Firefox, then select Options to open the options window
  2. Go to the Security Panel
  3. No longer asking to save passwords of Firefox, deselect "Remember passwords for sites" setting
  4. To remove the passwords that have been registered, click the "saved passwords" button to open the Manager of passwords
  5. In the passwords manager click the "remove all" to delete all saved passwords

• How can I install and synchronize my old palm tx handheld on a new laptop computer?

  I need to get my old palm tx handheld information and put it on a new laptop.

  Hi Fi Sh.

  ·         What version of the Windows operating system is installed on the computer?

  You can check if the following items to help you.

  Palm support: Palm TX - HotSync troubleshooting: start here

  Palm support: Palm TX - HotSync under Windows XP (part one) (See also part 2 and 3 at the end of this article)

  You can also contact the Palm TX technical support for assistance.

  Support Palm TX

• Dictionary of automatic correction for the pre Palm CHANGES AND MISSPELLED the words that I TYPE IN CORRECTLY

  A couple of weeks ago, I bought a Palm Pre from Bell Mobility at the Canada.

  It has an automatic correction function corrects usefully commonly spelled words as I type.

  Unfortunately, the dictionary he uses is itself riddled with errors!

  Here are three examples:

  1. If I type the word SURPRISE, he is replaced by SURPRISE.

  2. If I type the word CONNECTION, he is replaced by CONNECTION.

  3. If I type the word CHECK, it is replaced by CHECK. (In Canada, we use check to mean a Bank document and check to mean check.)

  There are also a few corrections that are not useful. For example, if I type the ID (as in identification), it is replaced by I got another: if I type U, it is replaced by you. So if I want to hit U.S., I receive from you. S. I understand that these shortcut replacements are useful for some people, they are not useful to me, and I would like to disable these special entries.

  I used to have a BlackBerry that had a function of automatic insertion. I could change or delete individual entries, add my own shortcuts (this has been extremely helpful - SS became Akrid, my name;) USS has become in the United States; etc.). Is it possible to do it on the Palm Pre, or am I stuck with the dictionary it provides? I love the Pre in other ways, but this thing strikes me slows I will exchange it for a BlackBerry Tour while I can still under my contract, unless there is a clever or clandestine way to change AutoCorrect entries. It's really a deal breaker - one question for me.

  Also, I know you can press BACKSPACE to undo the automatic correction, but by the moment I noticed that it is done, I'm already typing the next word, and at this time I have to go back and erase the whole previous word, enter it again, and then press BACKSPACE, before you type the next word. It really slows me typing it. It's very frustrating.

  Thanks for your suggestions.

  There are a few ways "undocumented" to change the dictionary. They require rooting your phone and it's not something palm would lead the person to do. But there is another hope. http://forums.precentral.NET/homebrew-apps/193362-AutoCorrect-edit-7-28-command-line-access.html is an application of work in progress, a person works to do exactly what you want, add, modify, delete words. I can only hope that once the app catalog beta is open there is a chance to see something like this soon. Or at least, maybe even an option of Palm themselves off.

• Erase the iPhone 6, iOS 10 to negotiate?

  I was in a hurry and do not pay attention to all the steps when I was preparing my phone to trade. I disabled the parameter "Find my iPhone" and then "erased all content and settings", then packaged upward and sent to Verizon. I didn't sign icloud first.

  My question is, I'm having a problem?

  No, if you have disabled find my iPhone. You can check it out by going to iCloud.com on a computer, open find my iPhone and see if your device is still on display. This it is, and it is connected to Wifi, you can select it and delete it again. It will ask you your password ID Apple/iCloud, and which will disable and erase the device. If you remove an instrument - this means that find my iPhone has been disabled. I wouldn't remove the device at this point.

  Once you are sure that Verizon is to have no problem with your device, you can then remove it from your iCloud account. But better not to do it until you get the all clear on their part. Easier to solve the problem if you are always bound...

  See you soon,.

  GB

• When the calendar opens again on my iMac it reduces to half, that was when I closed it

  Calendar is the only application that is not open to the same size when I close on my iMac.  Is there a setting that I've tweaked by mistake?

  Peter,

  Quit calendar.

  Then paste this ~/Library text in the Menu Finder > go > go to folder... window and select 'go '. This will open the folder library users.

  Then, open the Preferences folder in the library folder and move the file com.apple.iCal.plist on the desktop.

  Open an outbound/inbound session or restart and open the calendar. Health check.

  

• erase the memory of labview

  I'm working on a program of visulization of data that visualizes the data in different locations and performs post-processing such as reduction of the noise etc.. The data file is about 100 m wide, generated by "writing on a binary" clusters and berries. The visulization program is contructured in a mode of "state machine". It reads data from first, and then passes the data to move records to data different treatments, depending on which tab is clicked on the façade.  My problem is all first, it takes about 1 G of memory after reading the data file of 100 M. Secondly, after I run several times (to load different data files) memory continues to grow and possibly blocking the program.  Is it possible for a better distribution of memory and erase the previous data, once I loaded a different data file? A simplified program, in which I deleted most of the patterns of data processing is attached. Thank you!

  One method would be to reduce the number of times that you copy the data from the file through shift registers. You can also use the 'new data value reference' function instead of registers with shift if you use your file of data multiple times. Once you have finished processing the data, use the 'request for release' and 'remove reference to data value' to clear the memory.

  You can also use the link for more information below.

  http://zone.NI.com/reference/en-XX/help/371361J-01/lvconcepts/memory_management_for_large_data_sets/

• How to read a text file that is longer than 65536 lines and write the data to a spreadsheet Excel and the data to write in a new column, once exhausted 65536 cells in a column?

  I have data to the basic generic text file format that must be converted into Excel spreadsheet format.  The data are much longer than 65536 rows and in my code, I was not able to find a way to see the data in the next column.  Currently, the conversion is done manually and generates an Excel file which has a total of 30-40 complete columns of data.  Any suggestions would be greatly appreciated.

  Thank you

  Darrick

  Here is a possible solution to the (potential) problem. Convert an array of strings and erase the data before writing to the file

  

• The Print Spooler Service has stopped. Restart the print spooler and try to print and make the same mistake.

  Recharging according to the printing software and get always the same error.

  Hello

  You must ask in the answers – Windows Forums for your version of Windows.

  Answers - Windows Forums
  http://answers.Microsoft.com/en-us/Windows

  How to ask a question
  http://support.Microsoft.com/kb/555375

  ==================================

  Here is a troubleshooting guide for Windows 7 - Vista would be very similar.

  Check with the printer manufacturer for updated drivers and support for known issues.

  Check chan seen message here - one of the highest.

  fixed spooler subsystem app stopped working
  http://social.technet.Microsoft.com/forums/en/itprovistaprinting/thread/460f297a-dd66-4476-A176-542e1519ca3e

  ==================================

  Follow these steps in the kind of prerequisites:

  Clean the General corruption and repair or replace the damaged/missing files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ------------------------------------------------------

  References to Vista also apply to Windows 7.

  Go to the printer manufacturer's website and get the latest drivers - download - REGISTER - install yet. When loan
  to install - make a right-click on the pilot - run as administrator.

  Also check with the manufacturer of your printer and forums support.

  --------------------------------------

  Use this method to clear the spooler and then uninstall and reinstall your printer (check with the manufacturer for)
  the latest driver).

  Check Mr. Fixits here and if you use the other methods go back and try again later.

  Problems of print and error - a Mr Fixit of printing
  http://support.Microsoft.com/GP/printing_problems

  Solve printer problems - a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/8c11977e-8244-408f-A036-7978a618d7a21033.mspx

  ------------------------------------------------------

  Logon as administrator

  Start - type in the search box-> COMMAND - control to the top of the list and RIGHT CLICK – RUN AS ADMIN

  You can copy and paste each line except those brackets and press ENTER after each.

  net stop Spooler

  (echo suppression of all print jobs)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  del/q %SystemRoot%\system32\spool\printers\*.*

  net start Spooler

  (sound Done!)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  Another way
  http://4sysops.com/archives/how-to-cancel-a-print-job-that-hangs-under-Windows-Vista-and-XP/

  Check the print - DELETE/STOP queue all jobs - then right click on the printer - REMOVAL
  http://windowshelp.Microsoft.com/Windows/en-us/help/bb6f81d9-4092-4ac8-9716-2bd008f513e11033.mspx

  If you use Control Panel - Classic - printers

  Try after unplugging your printer if necessary.
  -------------------------------------------------------------

  Also check the spooler print and its dependencies and addictions Service.

  Print Spooler service (see the following link BlackViper for Windows 7 default dependencies)
  http://wiki.blackviper.com/wiki/Print_Spooler

  BlackViper Windows 7 Service - default settings
  http://www.blackviper.com/Windows_7/servicecfg.htm

  How difficulty Windows Vista print spooler starts do not
  http://www.ehow.com/how_4920100_vista-print-spooler-not-starting.html

  ------------------------------------------------------------

  Check this thread if necessary - to stop and erase the spooler

  http://social.answers.Microsoft.com/forums/en-us/vistaperformance/thread/a15779d6-ac0d-42FD-9Ac2-a1da241ea19f/

  and here

  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/58b54fa9-cf6f-40F7-90b2-8093c6777493

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">