Parallel parameter really reduce time for export?

Similar Questions

• Why is - this 3 minutes 4K video 24 hours for export?

  I am a complete newbie to creation, so I'm still learning how do, but even though I know that 3 minutes 4K video should not take 24 hours to export.

  Here is some information on the situation:

  Export settings:

  Using the H.264 format with the YouTube 4 K preset.

  

  FX applied:

  Small exposure compensation, contrast, saturation, etc.

  Lumetri color to apply READ

  Denoiser II 200%

  Add an MP3 soundtrack

  Using an adjustment layer for the color adjustment and an another adjustment layer to create an effect of culture

  Added a few titles of text

  Slow motion of a clip to 20% of the speed

  Source of images:

  Slog2 XAVCS 60Mbps 4K video in .mp4 format

  Image size: 3840 x 2160

  Bitrate: kbps 56722

  Rate: 24 p

  Specifications of the PC:

  i5 - 4790K

  GPU Radeon HD 7950

  8 GB RAM DDR3

  Windows 10

  Power supply 600W

  Let me know if you need more information about my project and I would appreciate any guidance at all! I'm so completely new to this, so I will try to learn as much as I can.

  Hello noahthomas,

  But even though I know that 3 minutes video 4 K should not take 24 hours for export.

  He could.

  First of all, I just created a FAQ for those who have the same problem as you. Please read and see what you think: FAQ: how to speed up making, export or encoding?

  My assessment for why it might take a long time to export your short project:

  1. Material considerations
     1. CPU: encoding is a CPU-intensive process.
        1. Consider that your processor can be not powerful enough for the encoding of the 4K images at the rate you would expect.
        2. Think also that you don't have several processors, like many computers.
     2. GPU: the GPU can be used to speed up some processes for export.
        1. Consider that your GPU is unable to be activated.
           1. Since you have a GPU that can probably be activated for GPU acceleration, ensure that it is enabled in the settings of the project.
           2. If you use SOUL, make sure this option is enabled, as well.
     3. Hard drive: fast hard disks can help exporters faster.
        1. You use a separate hard drive?
        2. If so, it is internal or external?
        3. How this player is connected?
           1. The hard drive is connected via wired broadband or a slower?
  2. Media optimized
     1. Your support is optimized for coding?
  1. No current scaling: good. However, you encode to an enormous size. Take into consideration the size of the actual image that you encode.
  2. You encode the original camera film, so that the smart rendering process cannot be used to speed up the encoding process unless it was converted.
  3. You add Lumetri effects, which can represent time in the encoding process.
     1. Technique to avoid this problem: transcode original camera to intermediate codec while at the same time adding the Lumetri same effect via Media Encoder before editing it.
  4. You use the effects of the third party: some third-party effects are known to considerably increase export time. Any image as Neat or Denoiser II denoiser are particularly notorious for jacking up your time for export. It's probably the cause of your long time export.
     1. A good way around this time intensive process is to transcode the images to an intermediate codec with the denoiser plug-in for Adobe Media Encoder.
     2. In a process of one night or more, before you start same edition. The treatment of effects, you know that you will use to forward the unloading can save loads of time ultimately encoding.
• You use rendered intelligent?
  1. You do not use made smart, therefore, you cannot export the absolute quickest way that Premiere Pro is capable.
  2. You can use smart making encoding tasks in the future, however, a large part of the benefits of smart rendering cannot be used unless you allow for it in the preparatory stages of the project planning. Again, see the FAQ for more information on the smart rendering and how it can save you time while being a more reliable way to export at the same time.

Hope this helps you for your encoding job and future encodes. Please return to the questions.

Thank you

Kevin

• "PP can now take full advantage of the PC with several GPU cards for export substantially accelerated time"

  On the features page Adobe clearly shows:

  Export multiple GPU support

  Premiere Pro can now take full advantage of computers with multiple GPU cards for export substantially accelerated time. Rendering and compression just got a whole lot faster.
  
  

  Can someone PLEASE be very specific as to how it works with the new 2015 CC?  I just bought my 2nd GTX 970 and SLI it had.  Now I read a lot of conflicting testimony online and can't seem to get a straight answer.  Please don't refer either items that are either outdated or forums.  Adobe CC 2015 was just released there not too long ago, which is what this new feature.
  

  Is having two 970's beneficial for first use SLI and AE?  Can I use the SLI bridge or not?   Can I turn in NVIDIA SLI Control Panel?  Or did I frankly just lose $330?

  Any educated idea would be GREATLY appreciated to help relieve this anxiety.  Thank you...

  
  
  
  

  Eric Bowen of computers ADK is frequently here on this forum, and with Bill Gehrke, can give you the best technique advises compared to your current and future workflow exact. Change style and which codecs you use are very important.

  Given that you JUST improved don't panic... There are a few simple adjustments, you can do to get the most out of your current equipment.

  1. make sure your Samsung 850 pro has ONLY your operating system, programs and Windows swap file on it... nothing more. Turn off "Indexing" for all your disks in the system. You will need a separate and quick 'reader' for ALL your other files (images, previews, projects, export, media cache and cache files). The IDEAL reader for this is the new SSD Samsung SM951 PCI, which runs more than 1.5 GB/s.  The performance is going to be super fast. the use of this drive, but its capacity is LIMITED. You would then be advised to add drive hard level of large companies 'offload' all files to the guard. These recent hard drives crashed at 200 MB/s with a 128 MB cache on them and go up to at least 6 TB of size... they are not expensive.

  2. your CPU is designed to be overclocked... TAKE ADVANTAGE of that and try to get the highest stable frequency, you can with it, ensuring that you use a good cooling solution--probably water. Performance will get a significant boost of this MOST important factor.  Of course, your CPU has "only' '8 processors" with hyperthreading from the end superior Haswell E CPUs that can give you sixteen YEARS... but, SPEED of CPU CLOCK is KING and will affect your performance because MOST of the video are processed ONLY with the CPU. NVidia GPU support will BE GREATLY whenever SPECIFIC on your timeline functions are those which can be CUDA accelerated... i. e "scaling", "ultra key", "dissolves" and a host of effects and other features. When it is the GPU CAN speed up the heavy calendar saturated with CUDA effects by a factor of TEN TIMES when "made this preview," or, "exporting media" your CPU has a stock speed of 3.6 Ghz and will be turbo up to 3.8 on all 4 cores. MANY users are overclocking your processor to a stable 4.7 Ghz... Some are more than 5 GHz! You can see that an increase of a full Ghz would give you about 20-25% performance... it's a LOT!

  It has been said here on this forum that once the processor is more than 4 GHz, it's OK even to 4K.

  However, I've ALSO seen here, (Eric, I think), that certain types of 4K really needs to have a GPU that has a minimum of 4 GB of memory DDR5 video memory due to "frame problem", or "frame buffer".    Thus, a return of the 970 s and KEEP one, (if it has 4 GB of video memory or more). Use the return to SM 951 drive.

  3. make sure all your settings are properly defined. In Windows, power settings make sure that all settings are for OPTIMAL PERFORMANCE so that Windows reduce NOT anything automatically... I learned this lesson on my laptop... the DEFAULT settings have been throttling the CPU and the GPU all the time until I fixed it!

  Then, first, make sure that you have the correct settings to allocate the amount of memory for first use... Eric has said here, it should be at least 3 GB by thread (I think... it can called ' base'...) I forgot). In YOUR case it means assign 24 GB of system memory for first, (8 'threads' x 3 = 24 GB). The rest can be defined for use in 'other programmes' of course, you can experiment and increase the amount of 3.5 or another higher.

  4. do not panic... Bill and I have the same laptops Asus who two years now with the 765 m 2 GB NVidia GPU in them and the HQ of 4700 i7 CPU. We shitcanned included and 5400 RPM hard drive and we both installed two quality SATA III SSD in each of the two hard drive bays. We also each increased the memory of the laptop to 24 GB. Bill has already done a few projects 4K basic on his laptop and I have experimented with 4K on mine. On my laptop, basic editing is not a problem with 4K, but addition of video tracks and effects slowing it... However, the chronology which fixes not making it. YOUR machine correctly overclocked, with more memory than we and a SM 951 and a GPU 970 should do very WELL at the moment... I think.   Unless you want to spend 4 to 5 $000 on a new machine of Haswell E X 99!

  p.s. If you are working with 4K and 1080 p quality, you need a couple of good monitors. I recently bought TWO 27 inch Acer IPS monitors that are WQHD, or, 2560 x 1440 p in the resolution. They were rated very high in addition to a review and are IPS... the density of pixels is IDEAL... to 27 inches, 1440 p video looks LIKE 4 K!   The quality of the color and the image is amazing. My laptop powers BOTH monitors at full resolution! We use HDMI 1.4 and the other the 'mini displayport' 1.1 connection... (which is also called Thunderbolt version 1). This monitor is only $200 on the egg, (including a $50 discount). Others in this class are 6 to 7 cents.

• iMac times 5K vs Mac Pro which is best for export and rendering?

  I am looking for a new machine edition and I'm debating between the new 5K iMac or Mac Pro.  I'm looking for something that will allow me to save time on exports of compression.

  Typical editing session:

  Adobe first Pro CC mixed with some compositions after effects CC.  Export via Media encode.

  -90 minutes of film Pro Res 422

  -Simple fades chained between songs

  -Green Screen to inlay

  -Light color correction

  -Graphic non-animation on screen

  -Possibility of some sequences of 4K (no more than 5 minutes)

  -Sequences linked to the external hard drive - exports going to the same drive. (Work of thunderbolt flow - see question below)

  When I edit the rough cuts for the approval of the customer, I would be compressed in H.264 format for easier time download and playback via the cloud service (Vimeo, Dropbox or car) sharing

  Which of these machines will be most effective in rendering, export and compression?

  When I say effective, I mean, the Mac Pro will save an hour or two in the export of time me?  From what I understand, they are almost identical.  Mac Pro can accelerate a little with 12-cores, but the processor is slower on the 12-core.

  PS - someone has a suggestion of confidence on a Thunderbolt 2 hard drive to edit out of?

  Ryan

  Yes IE reading using 1 disk as media and exported to a separate drive will be faster export. Time of export of the AE exceed normally until the time of the export of first if the comps are something more basic. So if this time receiver is something your tent to relieve the cores/threads are making a difference in the RAM. The drive Bay 4 will give you redundancy and protection of data. If losing a days worth of work is not a big deal separated readers are very good. If this isn't the case, then you may want to consider the Bay 4 after all.

  Eric
  ADK

• GarageBand adds 1.5 seconds follow-up of time when exporting to iTunes

  I recorded a 12-bar track in garageband 10.1.2 and wanted it to end exactly at the 12 bar, so that it would start on time when it is set to the loop. In GarageBand, it worked, but every time I exported it to iTunes, he found himself there with 1.5 seconds at the end of the runway, so that the loop does not work anymore. I put the arrow 'end' in the garage properly Strip and sometimes had activated the "loop" function, but nothing helps. In my old version of GarageBand, it was never a problem, and in the end, I had to do on my old mac... Any ideas?

  GarageBand adds additional silence to let the reverberation fade out. And allow extra silence for cross fading into iTunes.

  I tested again-

  • If I export a song with "share > song to iTunes" and select the measurements, I want to be exported wit the sequence in a loop and mark "Cycle region only" two extra seconds will be added.
  • If I export a song with "share > song about iDisk" and select the measurements, I want to be exported wit the sequence in a loop and mark "Cycle region", I get exactly the selected measures.

  So try a visit to export to your desktop first and then add the song to iTunes manually with "file > add to library."  That works for me.

• Time for a while loop to run once

  Hello guys,.

  I want to measure the time for a while loop to run once. There is a piece of code raised. So I just created a simple VI to try, please let me know which is the right way to do it?

  And I wondered, when I run the VI without highlighting the execution, he wouldn't give me a number, maybe it's because the code is simple and really fast? I have to highlight all the time?

  Thank you

  Not quite right.  Both get primitive value time will run at the same time.  use an image sequence to force the order of execution, as shown.  I also brought in the relitve of accuracy seconds vi of VI. LIB\utilities because it depends on the clock of the system rather than the mSec timer accuracy.

  

• I was charged 3 times for 1 month of my subscription

  Hey,.

  So I bought a student member creative cloud the other day, and when the purchase went through she started listening, so I closed the page and tried it again on a new tab. After I did I noticed that I was charged 3 times for the purchase of 1, that I have the evidence and everything, anyone know if I can get a refund or they let me just like that?

  It would be really nice to get a quick answer because I would like to know what to do

  TLDR; Bought a student member, charged 3 times, want reimbursement for the other 2 loads

  Contact support - for the link below, click on the still need help? option in the blue box below and choose the option to chat or by phone...

  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails to connect, try to use another browser.

  Creative cloud support (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html ( http://adobe.ly/19llvMN )

• Set the time for submisson of shape based on time zones?

  When a form is subimitted Eloqua assigns the Eloqua notifications server time (-5GMT) as a message of time. It's really annoying especially for messages of support, where the presentation time is critical for service-level agreements.

  Question: Is it possible to set the time of post with Java Script and if, how?

  The time of the default message cannot be adjusted, it will show always the time that the server received the presentation, in the zone servers (which is to the East).

  However, the use of javascript, you can have a hidden field on your form and apply a timestamp, using the local time of filers. With more complex javascript, you might apply a time stamp using the time zone of your choice.

• Setting date and time for several photos

  Thank you for providing the space for new users and thank you in advance for your help.

  Currently, I'm moving across lightroom and apple aperture/iphoto 5.

  The part of OCD I like to have my library organized, and I noticed that when I transferred my library everywhere he is in a bit of a mess, so I'm currently putting together the library and it cleaning (around 18000 photos)

  Anyway, I almost settled on a folder structure (YYYY/MM - I for the number of photos I have try on the nut until days could be for many - happy to receive Advisor on it also)

  For the most part, the photos have the date and time of the beginning of the digital age (for me from 2006)

  Photos prior to 2006 are in the negative, and I am currently underway with these scanned and imported into the library, I have a lot each month.  Set the date and time from the date of creation, this is where I am running into trouble.

  I looked around the web and various forums without success.

  First of all, I organize the pictures in the correct order.  Then I select the first photo and then select it the remaining photos.  I then select the date/time setting in the menu and select the first option, ajuster to adjust to the new date and time, say on 01/01/1990 to 1200 hours.

  The result I get is the first photo (the photo so good term) 01/01/1990 @ 1200 as the date and time, others have 01/01/1990 Date (if I'm lucky), and the time of jumping around.  Sometimes it wont even change the date time for the remaining photos.

  What I want to achieve is the time even for all the photos when I select a lot, or increment in time by a lump (is to say 1 minute (1200/1201/1202) or 1 second (1200:00 / 1200:01 / 1200:02)) and I seem not to be able to work it to do this automatically, currently, I have to do this by adjusting each photo (some 200 at a time) which is really manual labor)) intensive

  Thanks in advance and hoping an easy solution

  Concerning

  
  Dean

  I have had success using EXIF change of Basepath.com, but is not

  free. There are other publishers had EXIF free that may be useful to

  you. Some are better than others, and all have a learning curve. I suggest

  make a copy of some files you want to change and make a test of some of

  the available candidates. Search for "EXIF editors" and you can see what is

  available.

• Change the display time for grouped objects

  Hello, I have problems to change the display time for the grouped items. I use 7 Captivate and I love how now grouped items display only as an element in the timeline because it reduces the number of lines visiblein the chronology for each object on a slide. However, now that the grouped objects is more individually appear in the timeline panel, I can't see all the adjustments for group objects together.

  If someone else has had this problem and is there a work around? My main problem is that if I need to extend or shorten the audio to the slide, and I assigned a tip action to be grouped in order to adjust the grouped object to match the audio, I must now separate adjust, regroup, then reset the advanced action by using the name of the new group. It's frustrating and tedious.

  To enlarge and view the items grouped on the timeline, you need to click the arrow next to the group name. Once you develop, you can select the individual object and adjust the timings.

  

  Alternatively, you can select the individual object in the Group on the slide and adjust the timing of the accordion of timing. You can do it without separate.

  Anthony

• Only one Integrator for export csv to table and update the table?

  Hello
  I have a requirement where I need to create a single Integrator for export data in the CSV file into a custom oracle table and also use the same Integrator to download and update the custom table data. Is it possible to do this in a single Integrator.
  
  Thank you
  Kishore

  Yes you can do it.

  You must create a type of UPDATE metadata Integrator.

  First time:

  Custom table is empty.

  WEB ADI will download a blank Excel sheet. Copy the data from the CSV file and paste this Excel.Then download this file that will update the Integrator.

  A sample example is as follows:

  web_adi_pkg.main (param_1, param_2,... param_n)
  download_data;
  upload_data;

  Download data-> select query to download the data (select * from custom_table)
  Download the data-> insert into custom_table where NOT EXISTS (select 1 from custom_table where primary_key = primary_key_col_from_csv)
  update of custom_table where there are (select 1 from custom_table where primary_key = primary_key_col_from_csv)

  Please try above logic.

• a single button for export

  Hello
  
  Using obiee 11g.would like to know one thing, is it possible to have an export button for a single page and then when we do an export all reports in this page gets exported?
  
  I have some 25 reports in a page and its similar each time that all users they need all 25 reports to each time then export one by one, they are having difficulty.
  If no work around for this will be very useful
  
  Thank you

  Reference http://123obi.com/2011/05/obiee-11g-configure-oracle-bi-scheduler-e-mail-settings/
  http://obieemanu.blogspot.com/2011/06/OBIEE-11g-configure-Oracle-BI-Scheduler.html

• For the last week or three Firefox updated two or three times for each update and sometimes for no apparent reason...

  For the last week or three Firefox updates two or three times for each update. Sometimes it refreshes without obvious reason. For example, I'll be in the middle of typing in the message forum block & it refreshes. Or by filling out an online form. Or simply viewing a page.

  You can check for problems caused by an extension that is not working properly.

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

  • Do NOT click on the reset button on the startup window Mode without failure.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• I used a time capsule in my house.  Now, I have another network put in place and would like to set my time for back ups and NOT as a WiFi capsule

  I used a time capsule in my house.  Now, I have another network put in place and would like to set my time for back ups and NOT as a WiFi capsule

  If it is possible to turn off the WiFi on the Time Capsule, which only leaves you with the option to back up your Mac (s) using a wired Ethernet cable connection between the Mac (s) and the Time Capsule.

  Are you OK with that?

• Charge time for Satellite click Mini L9W - B

  I have another question:

  I noticed that in the first 5 months, the charge time for my click satellite mini was about 6-8 hours for two batteries. Now, it takes much more time. Currently, he is responsible for 13.5 hours and the keyboard battery is not yet completely load (I'll post the exact end time later...).

  There may be a problem or is this normal? I mean that the charging time has almost doubled...

  Thanks in advance

  AFAIK battery reach optimal performance, after some time of use... This means that the battery must be charged and discharged several times to reach the best level... but it also means that the battery charge time would increase...

  So from my point of few, there is no reason to fear that something could be wrong with the battery... you know...