parameter test conditions not

Similar Questions

• The use of reminders from prior step to configuration test conditions

  I'm trying to set a reminder from the prior step to check the test conditions and correct them if they do not match the needs of the test stage.  I was going to affect the test conditions in the before expression of each test step, but unfortunately, I found that expression pre runs AFTER the recall of the pre-trial stage.  Is there a way to get around this?  How can I get around this?  (i.e. to assign specific variables of step before running the recall of prior step).

  Thank you

  Sean

  I did some hacking of preconditions and even its easier than the example above.  Do not forget that in TestStand expressions, the comma (,) separates logical expressions.  But the return value of the expression is always the return value of the last expression.  So if you separate two logical expressions in the prerequisites with a comma, only the return value of the second gets used as the prerequisite.

  For example, if you always want to step to run, you can use:

  locals.myVar = 5, True

  Or if you already have prerequisites:

  locals.myVar = 5, AllOf (RunState.Sequence.Main ["ID #:"].) Result.Status == 'Past', RunState.Sequence.Main ["" ID #: ' "]. Result.Status == 'Pass')

  In addition, he discussed what order only one not executed his actions.  You can find this information in the TestStand reference manual in Chapter 3.  There is a table that lists the exact order of operations, including when the engine pre step callback is triggered.

• Political mistake with SOA 11 g test conditions

  All,
  
  I applied various policies of the fault to our composite of 11g SOA. Within these policies, we have a few simple test conditions to test various defects. These are specifically around bindingFaults. Our excerpt from our strategy of error similar to the following example. This includes various pl/sql custom errors that are thrown from the data base.
  
  < faultName xmlns:bpelx = "http://schemas.oracle.com/bpel/extension".
  name = "bpelx:bindingFault" >
  <!-ORA-04068: current state of the packages was ruled out->
  < condition >
  $fault.code / bpelx:code = "4068 < test >" < / test >
  < Ref action = "ora-connection-retry" / >
  < / condition >
  <! procedures - ORA-04063-Re-compiling PL/SQL and packs->
  < condition >
  $fault.code / bpelx:code = "4063 < test >" < / test >
  < Ref action = "ora-connection-retry" / >
  < / condition >
  <!-ORA-20001->
  < condition >
  $fault.code / bpelx:code = "20001 < test >" < / test >
  < Ref action = "ora - Cancel" / >
  < / condition >
  <!-ORA-20002->
  < condition >
  $fault.code / bpelx:code = "20002 < test >" < / test >
  < Ref action = "ora-retry" / >
  < / condition >
  <!-ORA-20003->
  < condition >
  $fault.code / bpelx:code = "20003 < test >" < / test >
  < Ref action = "ora-connection-retry" / >
  < / condition >
  < condition >
  < Ref action = 'ora-rethrow-fault' / >
  < / condition >
  
  The behavior we are seeing now is that even if we receive a fault of liaison with the respective codes, the test conditions are not processed. However the fault of default binding is executed. Politics of the fault is matching on the name of flaw bindingFault.
  
  Therefore, it seems that there is a problem with the test conditions. I read through various sources of documentation, and that sounds about right. It's the same test conditions of policies allows us to apply SOA 1og, which worked well.
  
  We are running with SOA Suite 11.1.1.3.0.
  
  I am unsure as to if there is a problem of logic, or if we run in an Oracle bug. Theres seems to be no reference to this on Metalink. Your comments would be appreciated.
  
  Dave

  You can use $fault.code instead of $fault.code / bpelx:code around and try again.

  Kind regards
  Ajay

• HP TouchSmart 300-1020: buttons HP Support Assistant diagnostic Test does not

  I have HP Support Assistant version 7.7.34.34, which - I think - is the right version for my TouchSmart from HP with Windows 7 64-bit 300-1020.

  When I try to run a diagnostic test (optical drive, USB key, sound card test, test test the printer, hard drive, keyboard, map chart, microphone, mouse), the button snaps (with mouse) for diagnosis, tests do not work.

  Basically... I click on the button for the desired... diagnostic test and nothing happens!

  Troubleshooting apparently buttons function very well... click on one and a convenience store starts.

  What can I do to "solve" the problem of Diagnostics button?  Thank you!

  You are welcome.

  Since your computer is 6 years old, I suggest that perform you a System Recovery.  I do this at least once a year because I like a computer that works like new without any problems.

• Jdev - query Tester does not work

  Jdev Version: 11.1.1.7.1

  The query VO on my Jdev Tester does not work. More importantly on my your Expert mode, when I add a new column to SQL, the attributes do not automatically get added to the VO. Only clue I have is the bottom of the stack trace that is thrown when I click on "Query Builder" (other buttons as Test donot throw any error and no success message):

  java.lang.NullPointerException

  at oracle.javatools.db.jdbc.JdbcDDLDatabase.registerBuilders(JdbcDDLDatabase.java:453)

  to oracle.javatools.db.AbstractDatabase. < init > (AbstractDatabase.java:85)

  to oracle.javatools.db.ddl.DDLDatabase. < init > (DDLDatabase.java:50)

  to oracle.javatools.db.jdbc.JdbcDDLDatabase. < init > (JdbcDDLDatabase.java:74)

  at oracle.javatools.db.jdbc.JdbcDatabaseFactory.createDatabaseImpl(JdbcDatabaseFactory.java:35)

  at oracle.javatools.db.DatabaseFactory.createDatabaseImpl(DatabaseFactory.java:241)

  at oracle.javatools.db.DatabaseFactory.createStandaloneDatabase(DatabaseFactory.java:344)

  at oracle.javatools.db.DatabaseFactory.findOrCreateDatabase(DatabaseFactory.java:326)

  at oracle.jbo.dt.jdevx.ui.view.XVOQueryBuilder.createDatabase(XVOQueryBuilder.java:273)

  at oracle.jbo.dt.jdevx.ui.view.XVOQueryBuilder.invokeQueryBuilder(XVOQueryBuilder.java:56)

  at oracle.jbo.dt.jdevx.ui.JdxMenuManager.invokeQueryBuilder(JdxMenuManager.java:1615)

  at oracle.jbo.dt.ui.view.VOClausePanel.queryBuilderAction(VOClausePanel.java:2440)

  at oracle.jbo.dt.ui.view.VOClausePanel.actionPerformed(VOClausePanel.java:1390)

  at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1995)

  in javax.swing.AbstractButton$ Handler.actionPerformed (AbstractButton.java:2318)

  at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:387)

  at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:242)

  at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:236)

  at java.awt.Component.processMouseEvent(Component.java:6289)

  at javax.swing.JComponent.processMouseEvent(JComponent.java:3267)

  at java.awt.Component.processEvent(Component.java:6054)

  at java.awt.Container.processEvent(Container.java:2041)

  at java.awt.Component.dispatchEventImpl(Component.java:4652)

  at java.awt.Container.dispatchEventImpl(Container.java:2099)

  at java.awt.Component.dispatchEvent(Component.java:4482)

  at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4577)

  at java.awt.LightweightDispatcher.processMouseEvent(Container.java:4238)

  at java.awt.LightweightDispatcher.dispatchEvent(Container.java:4168)

  at java.awt.Container.dispatchEventImpl(Container.java:2085)

  at java.awt.Window.dispatchEventImpl(Window.java:2478)

  at java.awt.Component.dispatchEvent(Component.java:4482)

  at java.awt.EventQueue.dispatchEventImpl(EventQueue.java:644)

  to java.awt.EventQueue.access$ 000 (EventQueue.java:85)

  in java.awt.EventQueue$ 1.run(EventQueue.java:603)

  in java.awt.EventQueue$ 1.run(EventQueue.java:601)

  at java.security.AccessController.doPrivileged (Native Method)

  in java.security.AccessControlContext$ 1.doIntersectionPrivilege(AccessControlContext.java:87)

  in java.security.AccessControlContext$ 1.doIntersectionPrivilege(AccessControlContext.java:98)

  in java.awt.EventQueue$ 2.run(EventQueue.java:617)

  in java.awt.EventQueue$ 2.run(EventQueue.java:615)

  at java.security.AccessController.doPrivileged (Native Method)

  in java.security.AccessControlContext$ 1.doIntersectionPrivilege(AccessControlContext.java:87)

  at java.awt.EventQueue.dispatchEvent(EventQueue.java:614)

  at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)

  at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)

  at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:178)

  in java.awt.Dialog$ 1.run(Dialog.java:1046)

  in java.awt.Dialog$ 3.run(Dialog.java:1098)

  at java.security.AccessController.doPrivileged (Native Method)

  at java.awt.Dialog.show(Dialog.java:1096)

  at java.awt.Component.show(Component.java:1585)

  at java.awt.Component.setVisible(Component.java:1537)

  at java.awt.Window.setVisible(Window.java:842)

  at java.awt.Dialog.setVisible(Dialog.java:986)

  at oracle.jbo.ui.main.JboDialog.setVisible(JboDialog.java:130)

  to oracle.jbo.ui.wizard.JboWizard$ MddWizardDialog.setVisible (JboWizard.java:2558)

  at oracle.bali.ewt.dialog.JEWTDialog.runDialog(JEWTDialog.java:395)

  at oracle.bali.ewt.dialog.JEWTDialog.runDialog(JEWTDialog.java:356)

  at oracle.jbo.ui.main.JboDialog.showDialog(JboDialog.java:108)

  to oracle.jbo.ui.wizard.JboWizard$ MddWizardDialog.showDialog (JboWizard.java:2494)

  at oracle.jbo.ui.wizard.JboWizard.createMddWizard(JboWizard.java:550)

  at oracle.jbo.ui.wizard.JboWizard.setVisible(JboWizard.java:353)

  at oracle.jbo.ui.wizard.JboWizard.showDialog(JboWizard.java:331)

  at oracle.jbo.dt.jdevx.ui.editors.view.VoeSqlPage.showEditSqlDialog(VoeSqlPage.java:625)

  at oracle.jbo.dt.jdevx.ui.editors.view.VoeSqlPage.invokeEditSqlDialog(VoeSqlPage.java:592)

  at oracle.jbo.dt.jdevx.ui.editors.view.VoeSqlPage.performAction(VoeSqlPage.java:935)

  at oracle.jbo.dt.ui.main.controls.DtcAction.actionPerformed(DtcAction.java:47)

  at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1995)

  in javax.swing.AbstractButton$ Handler.actionPerformed (AbstractButton.java:2318)

  at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:387)

  at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:242)

  at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:236)

  at java.awt.AWTEventMulticaster.mouseReleased(AWTEventMulticaster.java:273)

  at java.awt.Component.processMouseEvent(Component.java:6289)

  at javax.swing.JComponent.processMouseEvent(JComponent.java:3267)

  at java.awt.Component.processEvent(Component.java:6054)

  at java.awt.Container.processEvent(Container.java:2041)

  at java.awt.Component.dispatchEventImpl(Component.java:4652)

  at java.awt.Container.dispatchEventImpl(Container.java:2099)

  at java.awt.Component.dispatchEvent(Component.java:4482)

  at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4577)

  at java.awt.LightweightDispatcher.processMouseEvent(Container.java:4238)

  at java.awt.LightweightDispatcher.dispatchEvent(Container.java:4168)

  at java.awt.Container.dispatchEventImpl(Container.java:2085)

  at java.awt.Window.dispatchEventImpl(Window.java:2478)

  at java.awt.Component.dispatchEvent(Component.java:4482)

  at java.awt.EventQueue.dispatchEventImpl(EventQueue.java:644)

  to java.awt.EventQueue.access$ 000 (EventQueue.java:85)

  in java.awt.EventQueue$ 1.run(EventQueue.java:603)

  in java.awt.EventQueue$ 1.run(EventQueue.java:601)

  at java.security.AccessController.doPrivileged (Native Method)

  in java.security.AccessControlContext$ 1.doIntersectionPrivilege(AccessControlContext.java:87)

  in java.security.AccessControlContext$ 1.doIntersectionPrivilege(AccessControlContext.java:98)

  in java.awt.EventQueue$ 2.run(EventQueue.java:617)

  in java.awt.EventQueue$ 2.run(EventQueue.java:615)

  at java.security.AccessController.doPrivileged (Native Method)

  in java.security.AccessControlContext$ 1.doIntersectionPrivilege(AccessControlContext.java:87)

  at java.awt.EventQueue.dispatchEvent(EventQueue.java:614)

  at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)

  at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)

  at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:174)

  at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:169)

  at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:161)

  at java.awt.EventDispatchThread.run(EventDispatchThread.java:122)

  Any idea on what could be the problem?

  The question seems to be to the JDBC data source that we define in the configuration Module of the Application screen. We have a JNDI to data source, and somehow at design time, the your do not work with it. Currently, I change that to a local data source, the tester of VO, requeteur all work fine.

• The data are stored in the DB for the Jdeveloper test, but not in the dev environment

  The data are stored in the DB for the Jdeveloper test, but not in the dev environment

  Hi all,

  IM new with OFA and Im working with Jdeveloper, I create a form to store information using a VO and EO and add information to the current line using the attribute set of function, I noticed that when I lunch the update in the jdevelopher data is OK in the comic book, but when I install the development in the DEV environment the data stored using java code does not the table, only data that are related by the object as text fields and others.

  This is the code that I use for SAP data, it works in jd, but not in the dev environment

  {} public void saveData (String responsabilidadID)
  int respId = Integer.parseInt (responsabilidadID);
  OAViewObject vo = (OAViewObject) getQuiebresComercialesVO1 ();

  vo.getCurrentRow () .setAttribute ("ResponsabilidadId", respId);

  getTransaction () .commit ();
  }

  Any there who encounter this type of problem, something I can check?

  Thank you all.

  Just check if you bounced the server after you deploy the code. Objects Java would not reflect the changes, unless the instance is bounced.

• report with the parameter user is not runnig

  Hello
  I created the user parameter p_deptno and qyery related "" select * from emp where depno =: p_deptno ";"
  When I run the upgrade report page paper a popup page will open and ask us to enter the deptno and the input on the basis parameter, it retrieves the report folder.
  If I tried the same thing with the url: http://localhost:portno/reports/rwservlet? destype = hide & desformat = pdf & report = emp.jsp & userid=scott/tiger@orcl
  the parameter window is not opening and and blank report opens with the coloumn headers.
  help me solve the problem.
  
  I use devsuite oracle10g release 2 on linux (OEL4).

  Hello

  Use paramform = Yes instead of paramform = true:

  http://localhost:8890/reports/rwservlet?destype=cache&desformat=htmlcss&report=EMP.jsp&userid=Scott/Tiger@ORCL¶mform=Yes

  Concerning

• cache 'dist-test' does not support direct optimization

  I noticed this message in the log of my proxy Extend JVM. It is registered at the INFO level.
  
  The cache dist-test does not support direct optimization for objects in internal format. If possible, consider using a different cache topology.
  
  The Extend JVM proxy runs as a disabled storage for the cluster node.
  
  Any ideas what is the cause?
  
  Dist-test is configured like this:

    <caching-scheme-mapping>
  
      <cache-mapping>
        <cache-name>dist-*</cache-name>
        <scheme-name>near-entitled-scheme</scheme-name>
      </cache-mapping>
  
    </caching-scheme-mapping>
  
    <caching-schemes>
  
      <near-scheme>
        <scheme-name>near-entitled-scheme</scheme-name>
        <front-scheme>
          <local-scheme>
            <eviction-policy>HYBRID</eviction-policy>
            <high-units>1000</high-units>
          </local-scheme>
        </front-scheme>
        <back-scheme>
          <distributed-scheme>
            <scheme-ref>dist-default</scheme-ref>
          </distributed-scheme>
        </back-scheme>
      </near-scheme>
  
      <distributed-scheme>
        <scheme-name>dist-default</scheme-name>
        <serializer>
          <class-name>com.tangosol.io.pof.ConfigurablePofContext</class-name>
        </serializer>
        <lease-granularity>member</lease-granularity>
        <backing-map-scheme>
          <local-scheme>
            <listener>
              <class-scheme>
                <class-name>{backing-map-listener-class-name com.oracle.coherence.common.backingmaplisteners.NullBackingMapListener}</class-name>
                <init-params>
                  <init-param>
                    <param-type>com.tangosol.net.BackingMapManagerContext</param-type>
                    <param-value>{manager-context}</param-value>
                  </init-param>
                </init-params>
              </class-scheme>
            </listener>
          </local-scheme>
        </backing-map-scheme>
        <autostart>true</autostart>
      </distributed-scheme>
  
    </caching-schemes>

  I presume it's something to do with the plan closely because I don't see the message if I have the card dist-* caches directly to the dist - default scheme
  
  See you soon,.
  JK.

  Hi Jonathan,.

  You've found the warning as a near cache implements cache objects. Given that the service proxy uses POF, it must deserialize the POF serialized value in order to put it in the cache close. You do not see the message when you cache directly plan dist by default because it is configured to use the BOOM, allowing the proxy service pass the POF serialized value directly through the distributed cache service.

  Thank you
  Tom

• WRT 1200AC speed Test does not

  Test of speed inside the router no longer works.   Slow to respond and speeds from offshore.  I was wondering?

  My version of flash player is 19.0.0.245.  My router's firmware version is 1.0.4.167471.   V.2.2.0 speed in the router test.   Speed test by Ookla server based in Los Angles, CA.  Only runs IPv4.   All details provided in the inside of the router.

  Outdoor speed tests work.

  Someone else, a problem?

  Speed test works now.  Test speed to normal limits.  Any change to the router.  No change to anything.   I think it's an ISP issue now.   Highway 11/17 but disappeared from today when I checked last.

  But if you must know...

  ISP is TimeWarner cable.    Cable modem services.

  50Mbps down.   5 Mbps upward.
  Motorola / Arris SURFboard cable modem 600 series model SB6183
  Cat 6 Ethernet cable.   Excellent condition.   Not swapped, not necessary in this case.
  Never a problem of Internet connection, verified websites to normal speeds. I.e. www.speedtest.net & www.dslreports.com

  ISP MTU = 1500.   Standard with ISP.

  Your attention to detail is noted and understandable.    Thank you!   I really like my router but I like it with more features of the firmware update.

• "Order By" in Exists / condition not exist cause ORA-00907 in Apex4.1.1

  Hi guys,.
  We have just improved Apex 3.2.1 to 4.1.1. on Oracle DB V11.2.0.1, while testing the apps in the apex, I encountered this problem.
  
  When I have a page of the process with a defined condition.
  What Type of Condition is Exists (SQL query returns at least one row) or it does not exist (SQL query returns no line) and the Expression 1 is a query with an "Order By" clause, for example
  SELECT 123 DOUBLE
  ORDER BY 1
  
  When the process starts, Apex 3.2.1 assess the State and run the process very well, but the Apex 4.1.1 would throw an error: ORA-00907: lack the right parenthesis
  
  I understand that as an order of the clause in a condition Exists or it does not exist is not necessary and agree that they shouldn't be there in the first place.
  But unfortunately I'm dealing with other codes to developers, and these conditions were coded like that, probably from copy - paste the codes.
  
  Saying that, I also think that an upgrade of the Apex should not stop anything that works in previous versions without warning or provide a workaround solution, right?
  
  I don't know if this affects other types of artifacts that may have a condition by their Summit when upgraded to 3.2.1 e.g. areas, Items, calculations, Validations etc.
  Does anyone else get this behavior? and there at - it an easy way to fix these?
  Ideally I won't go through all the processes (and some other artifacts might be affected too) in all applications in all areas of work to verify the condition type and manually remove the "Order By" clause.
  
  Thank you for advising them
  
  Just did some tests more
  
  'Calculation', 'Validation', 'Process' and 'Branches' have the same problem, 3.2.1 takes 'Order By' fine condition Exists/Not Exists, but 4.1.1 throws the error message.
  
  "The regions", "Buttons", "Items" have the constant behavior - 3.2.1 both 4.1.1 throw error ORA-00907: lack the closing parenthesis, what page is rendered.
  
  Published by: Danny on 04/25/2012 20:07

  Hey Danny,

  It's interesting. I just had a peek at what happens when you use an EXISTS or NOT EXISTS condition type. The following SQL statement final will be generated with your example above. You can also see that if you run your application in debug mode.

  select count(*) from sys.dual where exists (select 123 from dual order by 1)
  

  The execution of this statement within SQL * Plus will also see the error ORA-00907. It seems that the SQL parser does not have an order by clause in a clause EXIST.

  I wonder why this should have worked in previous versions, but I can only suspect that in the past we can just running

  select 123 from dual order by 1
  

  which may be a little slower, because with the new engine EXISTS SQL statement may stop treatment earlier if it finds a record.
  We try to be backwards compatible, as much as possible, but I doubt that we will change the way it was before due to the alteration of performance would be faced with 99.9% of our customers.

  Possible workaround: you might be able to use the new "search request" to analyze your application "to" fix for all the shots where the attribute name is "Expression 1".

  Concerning
  Patrick
  -----------
  My Blog: http://www.inside-oracle-apex.com
  APEX Plug-Ins: http://apex.oracle.com/plugins
  Twitter: http://www.twitter.com/patrickwolf

• SQLCODE and sql rowcount % in test conditions

  I'm translating a procedure of Ingres to oracle. I use the Oracle sql and sqlcode % rowcount
  variables instead of Ingres, iierrornumber and iirowcount.
  
  I replaced the names of ingres with the names of oracle and now wonder how how oracle uses these
  values.
  
  I use DBMS_OUTPUT. Put_line to display the content of rowcount % sqlcode and sql.
  
  What happens when I'm 'without selected lines. I have run the same query in the stand-alone command line
  and don't get any selected rows... "(and that's okay, because I do not have the corresponding data to)."
  
  But when I run it in the procedure, I don't get any value of sqlcode or sql % rowcount... the
  program just stops. The author used the ingres code to test if the data were there
  continue to do something else.
  
  If you get no rows returned, what it means, the sqlcode is 0? and the number of lines % sql is empty?
  That's why my DBMS_OUTPUT. Put_line does not display anything?
  
  my example...
  
  before this section in proceedings... after running another select statement that returns data...
  I use the DBMS to debug the values I spent...
  
  DBMS_OUTPUT. Put_line ('BEFORE sqlcode is' | sqlcode);
  DBMS_OUTPUT. Put_line ('until sqlrowcount is"| % rowcount sql);
  
  Select the table value
  WHERE condition = "Y"; > This selection will be made 'no return lines' and ignore the below DBMS_OUTPUTS - 2
  
  DBMS_OUTPUT. Put_line ('AFTER sqlcode is' | sqlcode);
  DBMS_OUTPUT. Put_line ("AFTER sqlrowcount is" | % rowcount sql);
  
  When I run the procedure... I get statements DBMS BEFORE and nothing after...
  BEFORE sqlcode is 0
  Sqlrowcount is 1 > > > > that's all that is displayed
  
  
  Given that I'm getting the 'no row returned. How oracle it round to the experience of someone?
  
  Thank you. I learn a lot from your comments and your information.

  Show us the full procedure please.

  I'm guessing that you have a generic WHEN catch of OTHER exception that swallows the NO_DATA_FOUND exception I expect to see (depending on what you posted).

• Value of the URL parameter with: do not display correctly on the page

  Hello
  
  I'm working on a page with an interactive report. One report column is a hyperlink to another page (Page deletion). This link goes to an id and a title page delete such as its poster a confirmation message to the end user before to actually delete it. If the title contains a ': ' the text after the ":" is not displayed on the page (visible in the URL on top)
  
  Is it because that the ': ' separates parameters in a URL to the APEX and, therefore, the text after the ': ' is considered to be the following URL parameter?
  How can we solve this problem?
  
  Kind regards
  Priya Jetley

  A solution should be not only not to work with the parameters in the URL.

  Simply a process to pass values from one page to another as is:

  BEGIN
  IF: REQUEST = 'TEST' THEN
  P2_ID: = P1_ID;
  P2_TITLE: = P1_TITLE;
  END IF;
  END;

  In this case, your problem is solved, and it is safer because the user does not see what id is passed and can not manually put the id in the URL...

• Why firefox not on android tablets is still based. If it is still in testing, why not allow users to test it on their shelves and give feedback

  I currently have a Sony S tablet 4.0.3 running android, but I can't install firefox because it is not in the android market. But I tried it on my Galaxy google nexus and it works fine.

  There is a version of Firefox for android tablets available for testing. The devs don't want to push the release to the tablets again, but the nightly version linked above works really well on tablets.

• HP Pavilion Notebook Gaming: No sound from speakers - audio test is not

  Speakers do not work, I did a reading audio test but I get a message failed:

  help please.

  

  Hi @serabile,

  Welcome to the HP forums! It's a great way to engage, ask questions and find resolutions by working with specialists from the community of HP. I understand that you did a test of audio playback and there gave you a failure code. I'll be happy to help you with this.

  First of all, I think you did a work remarkable run diagnostics to determine exactly what that was wrong with the computer. Great job and Kudos to you for it! It is a privilege to work with technically skilled and savvy customers like you.

  Because it is clear as day, the soundcard of the computer does not, the only option left is to contact phone support to get the machine. Please visit this link http://hp.com/contacthp to do. Please select the language and country settings. So make sure you enter the product # of the device and follow the instructions on the screen to contact the hotline.

  I hope this helps! Please let me know how this pans. Please mark this message as "accepted Solution" if it helps. Bravo would be also appreciated for my efforts help the by clicking on the ""Thumbs Up ' button. "

  Take care and have a blessed in the coming week.

• Test hardware-&gt; Chipset test: does not apply?

  What it means? And how do I take the test?

  (Center Solution Lenovo ThinkPad 8)

  @hemanth_lenovo - I do not think that there is something wrong here, besides the fact that Lenovo solution center software is not the chipset Intel Atom found in the ThinkPad tablets.

  I get the same message 'not applicable' when I run the LSC on my TPT2. See http://1drv.ms/1tMx8KF

  Perhaps Lenovo should update LSC to treat the Atom chips, or clearly in the help text which, despite the warning icon display, there is nothing to worry about...