Parametric sice of change in shape of rectangle to scale and to the anchor point

Similar Questions

• I can't move the anchor points on a shape, I've drawn with the pen tool.  There are also small circles with a point in them (think focus), who they are and they are part of my problem.  If I open a new document and draw randomly everything is good, no foc

  I can't move the anchor points on a shape, I've drawn with the pen tool.  There are also small circles with a point in them (think focus), who they are and they are part of my problem? If I open a new document and draw randomly everything is good, no anchor and focus points behave.

  Bubble icons are the widgets corner. You can drag inward to round the corner. They are not part of your problem. If you want to hide them, select view > hide corner Widget. I have a hotkey defined for this menu item.

  If you see multiple bullseyes, you may have your set with the shape selected, that would prevent you from being able to move individual anchor points. Deselect the shape first, and then move the anchor with the direct Selection tool.

• New update has changed the behavior of the anchor points on the ellipses - frustrating!

  The new update has changed how anchors work on ellipses (at least - maybe other forms, too). It was I had the area around the ellipse and with the selection tool, I could drag the 4 anchors around the ellipse for the shape I wanted. Now anchors on both sides are working this way, but the other two across the entire ellipse! Is there a way to recover the old anchors?

  I also get a lot of weird behavior when copying and the adjustment of the ellipses. Sometimes the bounding box is around the new ellipse in that I paste. I have to go back and forth between the select and direct selection tool, and finally he will come to the top. :-/

  Thank you!

  Matt

  Yes, I see that they make in an arc/ellipse tool where you got the opportunity to make a thing of pie-chart-in searching for Pacman.

  In addition, reset the rectangle enclosing do not work on this thing.

  The answer is, they are slowly but surely adding more robust features for 'shape' elements in Illustrator. The difference between a 'form' and just a path in the shape of form, it's that a 'form' is made with a tool of shape as the Ellipse tool or a Rectangle, polygon, etc.

  Or a form can be made to take a path that meets the criteria: for example, a rectangle of any rotation that has 4 points at all the right angles. You can experiment by drawing your own rectangular path and lining up all the points so that your angles and lines are perfectly straight and using the object > shape > convert to the form menu item. However, if you add even one point back to the sides of the rectangle, the form will automatically extend to return to the regular way - which will be exactly the same in terms of the look you see on the screen.

  The difference between paths and shapes is that forms give you additional properties, which you can change using the area at the bottom of the transformation Panel. For rectangles, it's just the corners and the width/height, but for ellipses, it's now this pie thing.

  Anyway, even if I can't find any options to create shapes already developed using the shape tools, you can scale your ellipse using the transform tool manual (E) which dimensionnera the horizontal ellipse, or you can use the object > shape > menu item to expand whenever you make an ellipse. This could be done more quickly by recording an action and assigning a shortcut key, so you can convert out of any shape in a simple path.

• What can I do? I just change a pdf file, after you finish and save the changes, the stroke of the Acrobat Reader and lost all my changes, how do I get back them, he had a lot of work.

  What should I do toget back the changes that I made a PDF doc because Acrobat just stops?

  Hey Woisix,

  The auto save feature prevents changes to PDF since be lost after an unexpected interruption.

  Open the file to which you were changes. When you are prompted, click Yes to open the automatically saved files.

  If auto-save is turned off, then restart of the Preferences dialog box.

  Open Edit > Preferences > Documents and check "automatically save document changes to temporary file every XX minutes" and specify minutes for how often you want to save changes to the PDF files.

  If this feature has been disabled, so it is not possible to recover lost in the PDF file changes.

  Kind regards

  Ana Maria

• Whenever I try to insert a new shape (rectangle, ellipse, etc.) the shape gets distorted (tilts upward and to the right).

  I am a newbie in Illustrator. Whenever I try to insert a new shape (rectangle, ellipse, etc.) the shape gets distorted:

  

  How can I fix?

  Disable the perspective grid.

  Read about it in the manual.

• Change of tone of gradient mesh (without selecting each unique anchor point)

  Hey, I have a complex splatter work done with mesh in "red paint", I would like to have the same blue but changing color point-by-point seems a chore long and may end by different you have to guess the tone to re-create the salient effects of shadow/facts.

  Is there a way to change the general tone of the mesh all at once?

  Thank you!

  Select the mesh and then edit > edit colors > Recolor work

• How can I change the anchor Point?

  Hi, I'm new to the premier pro, Ive imported a vector of illustrator (a COG) I need to make rotation/rotation continuously in one place, the problem is the area bounding around her is huge and the GdG is not at the Center, the anchor is the way so when I turn it it wobbles around. An ideas? Thanks in advance

  Post edited by: Kevin Monahan

  Reason: The title was too long

  Currently, the only way to do this is to:

  1. Place the graphic in a sequence.
  2. Select the graph in the sequence and open the effect controls panel.
  3. Whirlpool open the motion effect and adjust the anchor Point property by dragging the X and coordinate hot text.
  4. You may need to adjust the Position property to place the graphic where you want, because it will pass like you most the anchor Point property.

• Moving anchor points and the whole shape gets distorted to change the line weight

  I have a fairly simple drawing that I drew in a larger size, so I could be more specific with it, and now I want to reduce up to the finished size and thicken the line, but when I make the line thicker, my anchor points are moving and the whole drawing is distorted.

  Using Adobe Illustrator of 24 years, I never saw that happen. When I click on the "up" arrow in the stroke palette a lot of time to gradually increase the thickness of line, I can watch made anchor 'walk' around like my shape gets distorted.

  If I go to the place a numeric value for the thickness of line, it doesn't.

  However, if I use the scale tool to shrink the design down to the size of 10% or 20%, or whatever, with traits of the scale and effects UNCHECKED, yet once, move the anchor points and the drawing is distorted.

  It's all about a brand new installation of Illustrator CS 6 for Mac (although I use CS 6 for about 2 years now, my hardrive crashed this past weekend and I had to reinstall everything).

  I missed a little box somewhere that I never saw elsewhere that is what actually happen?

  This post editing to add:

  Also, some of these objects in my drawing I cannot change the race less than 1 point thickness. If I choisis.5 ou.25 pt in the context menu, or even if I enter the numeric value, it jumps to 1 point. Other objects in the drawing are not.

  These objects in question are "rounded rectangle" forms I used the scissors tools to cut and then used the "join" command to put them as well as other forms that have been "scissored"as well."

  All forms of "Ellipse" and "Rounded Rectangle" that I have left intact do not exhibit this problem with stroke and distortion.

  You are being bitten by the Align-to - pixel grid. Select the entire document and go to the transformation Panel and turn off snap to Pixel - grid at the bottom of the Panel. Then go into the rollout (small triangle in the upper-right) and disable align objects on the pixel grid.

• Shape layers composed pre receives the full composition size and anchor point

  I want a precomp to a shape layer,
  but I want it to be the right size of the form and have points in the center of the horizontal and vertical anchor shape.

  Whenever I take a form and create a precomp it will immediately get up to the full composition and weight and the anchor point will be in the middle of these dimensions.

  How can I create a precomp to a shape layer to the right size and with the right anchor point?

  Thank you!

  A demo is always going to be the same size as the original. This does not mean that you cannot resize the pane later.

  When you create your shape layer, you will need to press the u key to reveal all the form properties and reset the position of the form at 0,0. This will bring the shape layer in the composition. After you you need to precompose, you can now change the size of the publication.

• Change an object anchor Point

  Hello

  Let me preface this with the fact that I am quite new in InDesign.

  Let's say I have a rectangle on the page. Anchor of the page occupies the Center. I got like that doesn't change, however, I want to put the new geometric limits on the rectangle with another Anchor Point.

  How can I change the anchor of an object using javascript?

  I thought that something along the lines of:

  var point = myDoc.pageItems [0];

  order of the day. ChangeObjectProperties.anchorPoint = AnchorPoint.BOTTOM_CENTER_ANCHOR;

  However, it is said that 'element' does not support the ChangeObjectProperties method.

  What can I do?

  Page elements is not the anchor points; more than pages. Window layout has a transformReferencePoint which controls the anchor for the changes in the user interface. If you assign a new geometricBounds to a page element, you basically set the coordinates of all four points of the bounding box, so anchor does not come into it. If you want to, say, double the height of a box while leaving her stockings where it is, you can use the resize() method:

  item.resize(CoordinateSpaces.INNER_COORDINATES, AnchorPoint.BOTTOM_CENTER_ANCHOR, ResizeMethods.MULTIPLYING_CURRENT_DIMENSIONS_BY, [ResizeConstraints.KEEP_CURRENT_VALUE, 2]);
  

  Transformations in InDesign are difficult, however; I certainly do not understand them. It is usually easier to just do all arithmetic you need to come up with a new geometricBounds for the page element.

  Jeff

• HELP - strange behavior rounded Rectangle - cannot select Anchor Points

  Good day to you all, I hope someone can help out me.

  I have a strange problem with my Illustrator CS3.

  I worked on an illustration for hours without any problem and the graphics requires me to do a lot of "buttons". I used the rectangular shape with AESTHETIC tool > > button CORNERS ROUNDED to create different forms without any problem whatsoever.

  All of a sudden (without close AICS3), all my NEWLY CREATED rectangles behave strangely.

  None of my new rectangles allowed me to individually select anchor points. As you know, when you create a rounded rectangle, you'll find yourself with 8 points (2 per corner) compared with 4 anchor points in a normal rectangle. In this case, all of my new rounded rectangles show only 4 points.

  When I choose the direct Selection (white arrow) tool, I can not select on the path itself and only the limit is displayed (with corner WHITE, no black points). Adjust this flat bounding box / distorts my rectangle, while the scales of adjustment with the black arrow rectangle. I can't use the scissors tool either. I can't add/remove is a path with the pen tool.

  I can't select individual anchor points.

  All of the 'old' generated rectangles are fine, I can select each path and anchor individually, but all rectangles later do not allow me to do.

  To add to the confusion, this only happens with rectangles. As you can see with the picture below. I can create any simple or complex form/paths, and I can choose individual anchors with no problems. Can I use the tool scissors without any problem or even the tool pen to add/remove a path to all other forms BUT the rectangle with corners rounded...

  

  Only the rounded rectangle tool shows the anchor 'blue '. Note that all four forms have been selected with the direct Selection (white arrow) tool. If I used the black arrow, then the selection should have been outside of the black lines of the rounded rectangle.

  What is going on? I deleted the AIPrefs, it isn't CTRL-H, I am really confused...

  Help, please. Thank you very much

  Dave

  As you know, when you create a rounded rectangle, you'll find yourself with 8 points (2 per corner) compared with 4 anchor points in a normal rectangle. In this case, all of my new rounded rectangles show only 4 points.

  Yes, as it should be. Rounded corners is an effect and unrelated to the native rounded rectangle tool. In order for the paths, the effect should be expanded using the object--> Expand.

  Mylenium

• When not in Windows service will change screen what ever I've sat and that he go the first screen where it asks who is connect and it crashes my computer

  original title: security

  Here's the question-problem: when not in use Windows will change screen what ever I've sat and go the first screen where it asks who is connect and it crashes my computer. All I have to do is click on the little box that says locked and I go back to what I was doing. I don't want to do this. I have magic jack phone service and when she did this, I do not get calls? Is it possible that turns off. I have only one user of this computer.

  Go to Start\Control Panel\Hardware and Sound\Power Options\Edit the parameters of the Plan

  Change the option put the computer to sleep time forever!

• Default anchor point has changed to the lower left corner of the layer?

  Whenever I have add a new text layer, the anchor point is automatically set on the lower left corner of the layer, and I find it very annoying to have to focus each time, and that it possibly is not perfectly in the center of the text, moreover, whenever I create a form with SHIFT-command that it revolves around its own anchor while he used to focus around the anchor in the Middle of the composition. I don't know what I did but it happened all of a sudden, and I don't know how to change it back .

  Thank you

  Focus you the text layer by resetting the position of the text layer in the primary processing Panel. Text animations give you a secondary position and anchor point controls. The text layer must have a position of half the width of the model and half the height of the model.

  Once you are there you center text horizontally around the anchor using the paragraph Panel. Make sure that you have first line or paragraph compensation applied.

  The last step is to visually Center the text vertically by adjusting the vertical offset in the character Panel. The value of the offset depends on the size of the font, the characters you use, font style and what your said eye is centered. Most of the time, you want a little more space at the bottom of the frame as above because we are used to see things sitting on a foundation. It's the same principle while watching a photo for framing.

  These are the same exact steps for the type definition in any application which allows you to adjust the formatting of the type. Even in MS Word, Illustrator, Photoshop, even the same using CSS rules when creating a web page.

• AE CS5 - shape layer - moves the anchor after keyframe position

  I am an intuitive (to me) behavior with a new shape layer. Here are the steps to reproduce the problem. I was able to make a CAP to screen the problem but can't find a way to upload it on this forum.

  1. in an existing publication, I create a new shape layer

  2. by default, the anchor (central point) is in the center of the shape layer dead. Perfect.

  3. I turn on Position key frames and add a keyframe position my moment

  4. instantly the anchor now jumps to the center of the composition, and so now when I adapt my shape layer is not measure correctly

  If I try to use the Pan tool, I get keys to position images. Moreover, I SHOULD NOT HAVE to DO THIS, being the anchor point to the correct start with place and it is only because of this "bug" keyframing who jumps out of anchor point.

  What I'm missing or doing wrong? How can I add a keyframe position to a NEW LAYER that has no other animation on it and always keep the anchor point in the center of dead of my form?

  Thanks for your advice,

  Tom

  Again, read the help. Shape layer items have their own groups of transformation. To achieve a correct animation, you must animate those, not the global container layer.

  Mylenium

• A request for help drawing - CS3 - My Rectangle tool (and all the variants, circle, oval, etc.) are...

  Help request - CS3 - Illustrator - Rectangle drawing tool (and all the variants, circle, oval, etc.) draw rectangles of multi which are anchored to the point where the action of drawing was started and the spacing between these rectangles is compared to how fast the mouse moves while drawing and the location of each object follows the path of the mouse.

  It's an interesting drawing effect and maybe someday an end, but I did not when I turned it on or how to get rid of.

  I leave and reopened the app.

  I removed my preferences and quit and reopened the app - it's is still there.

  All the help which can be extended to a user on the fly, trying to convert would be much appreciated.

  Yes that's correct pls check your keyboard if this tilde ~ works properly or not