Vista will not connect to WiFi automatically (but my iPhone works well!)

Similar Questions

• Why Vista will not connect to the internet wherever I'm connected with my XP machine?

  Why my computer won't get online wherever I like Xp only

  Why Vista will not connect to the internet wherever I am?  I thought what to see that there is a link to a site to repair this, but when I found the site the link had disappeared.  Thank you

  Hello

  1 are you facing issue while trying to connect to public Wi - Fi hotspots or private home network?

  2 have you tried all of the suggestions of Fahimulla K?

  I suggest you to go through the steps mentioned in the link and the Coachman.

  Solve problems, find wireless networks

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-finding-wireless-networks

  See also:

  Wireless network card: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/wireless-networking-frequently-asked-questions

• My iPod touch will not connect to WiFi and I followed the steps posted. Also, when he dies he thinks that it is December 31, 1969. What can I do to fix this?

  My iPod touch will not connect to WiFi and I followed the steps posted. Also, when he dies he thinks that it is December 31, 1969. What can I do to fix this?

  Not knowing what the 'followed the steps posted' have been

  The iOS device connects to other networks? If Yes, which tends to indicate a problem with your network.

  The iOS device sees the network?

  Error messages?

  Other devices connect now?

  The iOS device has connected before?

  Try the following to rule out a software problem:

  -Reset the device iOS. Nothing will be lost

  Device iOS Reset: Hold down the On / Off button and the Home button at the same time for to

  ten seconds, until the Apple logo appears.

  -Power off, then back on your router

  . - Reset network settings: settings > general > reset > reset network settings

  - iOS: troubleshooting connections and Wi - Fi networks

  If your iPhone, iPad or iPod touch connects to a Wi - Fi network

  - iOS: recommended for WiFi routers and access points

  -Restore from backup. See:

  iOS: how to save

  -Restore factory settings/new iOS device.

  If still problem and it does not connect to any networks make an appointment at an Apple store Genius Bar because it appears that you have a hardware problem.

  Shop Apple Store - Genius Bar

• My laptop Sony VAIO with Vista will not connect and stay connected to my wireless internet.

  My laptop Sony VAIO with Vista will not connect and stay connected to my wireless internet.  All other laptops in the House are perfectly.  Internet disconnects, says local only, then reconnects constantly making internet hard work.

  Hi Tinkerbellfancolorado,

  1. When is this last work fine?
  2. Do you receive an error message or error codes?
  3. Recent changes on the computer?

  There could be several causes for this problem.

  Try starting with these methods.

  Method 1

  Step 1

  1. Open Network Diagnostics by right-clicking the network icon in the notification area, and then click diagnose and repair.
  2. Make sure that all cables are connected (for example, make sure that your modem is connected to a working jack or cable phone connection, either directly or through a router).
  3. Reset your modem and router. Remove the power cord from the modem or router, wait at least 10 seconds, then plug in the modem and/or router back.

  Step 2

  Another reason may be windows disable your network adapter to save power. Turn off the power saving option in the properties of the network (wired network only cards) card:

  1. Open network connections by clicking the Start button, clicking Control Panel, clicking network and Internet, click network and sharing Center, and then clicking manage network connections.
  2. Right-click on the connection and then click Properties. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  3. On the Networking tab, click Configure.
  4. On the power management tab, clear the allow the computer to turn off this device to save power option, and then click OK.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

  Method 2

  Temporarily disable the firewall, and check the status.

  NOTE: To re-enable the firewall after check you the status. If you are connected to the Internet or a network during the time that your /firewall antivirus software is disabled, your computer is vulnerable to attacks.

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off

  Hope that was heloful.

  Bindu S - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think

• The new version does not see my camera. But my cam works well with older versions. What should I do?

  The new version of Skype does not see my camera. But my cam works well with all older versions. And it works with any other programs as well.

  Try to uninstall the version 6.18 and install version Skype 6.14.0.104.

  You can use this download link for the 6.14.0.104 version:

  http://community.Skype.com/T5/Windows-desktop-client/ASUS-USB2-0-webcam-not-recognized-by-Skype-6-18...

  Don't forget to turn off the automatic updates:

  Tools-> Options-> Advanced-> automatic updates-> turn off automatic updates

• L850 satellite will not connect to Wifi

  Hi, new here.

  I have a Toshiba L850 which does not connect to wifi,
  Many other devices in the House and the L850 was last week.

  You can see my router but will not connect.
  It is the 'limited access' connection, but not more.
  Said troubleshooting couldn't identify the problem.

  When I try and access the Device Manager, I get a "Explorer.EXE" the specified service does not exist as an installed service?

  Help.

  Paul.

  > He sees my router but will not connect.

  I guess that your router is secured by encryption (WEP or WPA / WPA2)
  Test WiFi connection without the use of WLan encryption settings.
  Turn off in the router settings and test the connectivity.

  Of course you need to do that just for test purposes because it s not advised to use the unsecured WiFi.

  Where you have no problem to connect the laptop to 'open' WLan, I recommend changing the encryption type.

• phone will not connect to WiFi

  Hi, my phone is not connecting to WiFi
  It was fine to start with and now it does not work. I tested my WiFi with others and they all get the signal and excellent connectivity.
  My z2 is either stuck in step "obtaining the IP address" or telling me he avoided a bad connection, despite the fact that I have this option disabled.
  I tried turning everything market, I tried forgetting the network and reconnect. I tried to unplug my swr10 smartband I read another post suggested that it caused problems.
  Nothing works. It will be not just to connect to my WiFi at home.
  I read a post suggesting the firmware requires a downgrade but I'm not technical interest and I'm afraid to try because it is a new phone and I don't want to void the warranty.
  Someone at - it ideas?

  I think that I have solved it without going through the firmware downgrade. I went to advanced, disabled wifi wifi optimization. Then he returned, and then rebooted the phone. WiFi has been the connection perfectly for this, but as I do not understand the phones I can't offer an explanation as to why! It has been working well for 3 days now. I'll keep it under control, but it is worth a try for someone else in the same situation. I also have a colleague with a z1 which must have WiFi optimization disabled permanently to run WiFi, once again, don't know why but yet once worth a try.

• Printer will not connect via WIFI

  I'm continually offered an update for my CANON MG3250 printer, I've now had 8 in the past two months, and all were successful. Now my printer doesn't work! that is, it does not connect via WIFI, but will work on cable? All ideas/solutions please.

  Hello Nigel,

  Thank you for your response.

  I'm sorry for the late reply.

  I appreciate your time.

  I suggest you to refer to this article and check.
  Reference:
  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1

  Please keep us updated.

  Thank you

• iPhone will not connect to WiFi

  I have an iPhone running iOS 10 6. Since I have updated to iOS 10, I had problems connecting to WiFi. It happened the first time I've updated and I read that it could be some issues with the latest iOS, therefore, some recommendations to restore the iPhone, I did and it set for a few days, but once again, the issue is back.

  When I go into WiFi mid settings it does not recognize my WiFi network, but as he said 'safety recommendation' when I hit I got a message that says "low security, WEP is not considered as safe. Configure your router to use WPA2-Personal (AES) security type for this network"

  This message never came until it again once I have updated to iOS.

  Any thoughts?

  Thanks in advance!

  Hello

  Follow the steps here:

  • If your iPhone, iPad or iPod touch connects to a Wi - Fi - Apple Support network
  • To connect to the Wi - Fi on your iPhone, iPad or iPod touch - Apple Support

  Apple recommends the parameters of the Wi - Fi routers and access points are detailed here:

  • Recommended settings for the WiFi routers and access points - Apple supported

• iPod touch will not connect to wifi, I have tried everything!

  I used this touch iPod for over a year, and all of a sudden, it does not connect to wifi. I type the correct password, but he responds with "wrong password". I checked since then with several computers apple and iPod touch on the connection and that's fine. I even had these devices 'forget' the network and reconnect without any problem. I also had new devices to connect to the same wifi signal. I know that's not the router. I reset the network settings, reset the content and settings. I tried to restore then connected to iTunes and told to disable Find My first iPhone, but should not be my apple ID password. When you are connected to iTunes I put the iPod into recovery mode (connector pointing to iTunes screen show) and reset to factory settings and it won't always connect to the wifi. I'm looking for ways to solve this problem all over the internet and I'm out of ideas. The iPod is updated to the current 9.1 iOS. Someone at - it else I can try?

  It connects to other networks?

• My accounts on my laptop Windows 8 will not connect to wifi.

  On two of my accounts, she claims that my wifi is limited, although it works well. On a user account I just do well, the wifi works very well and does not say it is limited. Anyone have any suggestions on how to fix this?

  The accounts would be microsoft accounts. I actually received an error message wifi has shown to be "limited." No, I did not any changes to the computer before that happens.
  Right now, the accounts have connected to wifi without problem, without doing me anything. Thank you for your answer to help me solve my problem and if the problem comes back, I will return to these methods to see if one of them solve the problem. Thank you.

• Satellite Pro L300 will not connect to Wifi after hibernation

  Hello

  can someone there help me please?
  I have a Satellite Pro L300 and it does not connect to Wifi after hibernation.

  The only way to do it is to restart the pc.

  Any suggestions?

  Hello!

  I m using a Satellite L300, which should be similar to yours and I peut t noticed this problem. WiFi works perfectly without any problems.

  In any case, I would recommend updating the driver WLAN and the BIOS. The two you can find on the Toshiba site:
  http://forums.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  In addition, you run the factory settings or you have installed a different version of Windows?

  Good bye

• MacBook air will not connect to wifi at all the

  so my air was bought last year (June 3, 2015, to be exact) and the other to have me recheck everythings password a few times was fine, but today the wireless connection just stopped working and I have no idea why? I called my service provider and they have implemented a new wifi which worked for about 3 seconds before he told me that I could not connect again. my password is correct, but its mainly telling me connection timeout when I try to connect. its gives me the message "network could not be connected to.

  When I run Network Diagnostics told me that my information is incorrect, that is not true... its becoming very stressful for me given that 90% of my school work relies on my computer with internet.

  Ive tried everything say other issues, Ive tried to go into the advanced settings, ive tried removing all my other saved networks, ive tried to restart, ive tried to restart my router and nothing works. I need this problem really soon otherwise im going to be screwed come the time to write my English book.

  So MUCH for some reason any it plugged into his own again?

• Windows Vista will not start after the automatic installation of the patch Ms.

  My Dell laptop does an automatic installation of the latest MS patches (12/08/10) and now he can't boot into windows.  All tests show that the material is fine, but an error at the end of the "bad update patch" said test results I can not even to go back to a previous restore point.  This happened to me the year last on my desk... same thing, but it's XP which could not start after an automatic update for the Member States.  Dell technical support told me that MS knows what is happening, but it is not supposed to be public knowledge.  I need to know if there is a fix, in addition to erase everything and do a complete reinstallation of the operating system.

  Follow these steps to try to solve your problems of boot.

   

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If the system or Mode restore safe work not and you do not have a Microsoft Vista DVD, make a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• I have an inspiron which will remain not connected to wireless internet but another computer works perfectly

  I have a Dell inspiration that will remain not connected to the internet wireless, but the other computer

  Are the two computers to the same distance from the router?   How many bars do you plan to connect?  You use without wireless - G or wireless-N?  Try clicking on the bars (next to the lower-right clck) then click on Open network and sharing Center, then click on wireless network connection and see that the number of MB/s is just above the bars in the middle of the right.  You should see something like 54 Mbps and at least 2 or 3 bars.

  Good luck.