Partition is not created

Hi all

Trying to create a transparent wall.

Source and target on the same server.

Source is EAL cube - Cube created through link Analytics of HFM

Source target n - @Idescendents of all Member areas.

No mappings defined.

Validation works fine just thinking that it seems to me a message saying "Partition Creation failed."

Please throw your ideas

Thanks in advance


Hello

can you do a quick check on both the database

-any other partition exists
-all active connections on two databases if yes to disconnect all users with force

then create back partition and if still the problem can share you the essbase so logs.

Thank you

~ KKT ~.

Tags: Business Intelligence

Similar Questions

  • Qosmio G35-AV600: using Recovery CD I get partition not created error

    I recently ordered a recovery for my Qosmio G35-AV600 disc, because I started in safe mode to clear an alleged threat. Silly me! I forgot the password because I constantly use the fingerprint reader. Well, at the time where, that drives recovery came, I had remembered a password and access I.

    The thing is I always want to format the laptop, but I get partition not created not errors. Is it because the laptop hard drive has SATA or RAID capabilities, or because of the so-called Qosmio player. * If I could format the hard drive, I would not be able to use the laptop Qosmio mode? *

    I searched here and even contacted the customer service and have not found a definitive answer. Customer support's solution was to send to an authorized repair shop. My experience with computer repair shops, is that if the problem is not hardware related, they simply reformat the disks. I could do it myself if I could get help with this "partition has not created" or the partition not deleted"errors.

    Hello

    I agree with you and I also think that this has nothing to do with the hardware failure.
    But who knows, if you started the operating system in safe mode then we shouldn't exclude the hardware problem (IE. HARD DRIVE).

    However, the restore CD contains already all the drivers and you n t need to install SATA or RAID drivers.

    In my opinion, there are bad RAID settings in the BIOS!
    Please check the settings in the BIOS on the third page.

    If you know n t that mean simple settings, you open the user manual and check RAID chapter in the user manual.

    In addition, this could be useful:
    http://support.toshiba-tro.de/KB0/TSB6901K60006R01.htm

  • Error: "could not create a new partition or locate a" when installing Windows via Boot Camp 10

    This error occurs on my 2012 15-inch MacBook Pro. I have 2 hard drives. One dedicated to OSX and one for Windows. This is my first install bootcamp. I let bootcamp create partitions, but to the partition/disk screen hard to choose, I get a message saying: "we could not create a new partition or locate a.. The partition has been formatted to NTFS. I tried later in this guide community post here: error: "we could not create a new partition or locate and existing" install Windows via Bootcamp 8.1, but no luck. I even tried to delete the partitions and create a partition empty for windows so it can create and format on its own and start using EFI. At this point, windows begins to install it and restart, but it fails during the part material recording and restarts. Then when it starts again I get a message that the installation has failed.

    Here's some output terminal which can help you to (I) hope.

    Blakes-MBP:~ blakeleeper$ diskutil list
    /dev/disk0 (internal, physical):
       #:                       TYPE NAME                    SIZE       IDENTIFIER
       0:      GUID_partition_scheme                        *500.1 GB   disk0
       1:                        EFI EFI                     209.7 MB   disk0s1
       2:          Apple_CoreStorage Macintosh HD            499.2 GB   disk0s2
       3:                 Apple_Boot Recovery HD             650.0 MB   disk0s3
    /dev/disk1 (internal, physical):
       #:                       TYPE NAME                    SIZE       IDENTIFIER
       0:      GUID_partition_scheme                        *320.1 GB   disk1
       1:                        EFI EFI                     209.7 MB   disk1s1
       2:       Microsoft Basic Data                         319.9 GB   disk1s2
    /dev/disk2 (internal, virtual):
       #:                       TYPE NAME                    SIZE       IDENTIFIER
       0:                  Apple_HFS Macintosh HD           +498.9 GB   disk2
                                     Logical Volume on disk0s2
                                     27D631AE-27C5-4E4B-98BC-92CE944ED60B
                                     Unlocked Encrypted
    /dev/disk3 (external, physical):
       #:                       TYPE NAME                    SIZE       IDENTIFIER
       0:     FDisk_partition_scheme                        *16.0 GB    disk3
       1:                 DOS_FAT_32 WININSTALL              16.0 GB    disk3s1
    Blakes-MBP:~ blakeleeper$
    

    You must disconnect the internal bus 500 GB SATA drive and use a flashdrive USB2 for OS X from startup. The 320 GB designated drive must be in the main Bay of the Mac. Once Windows is installed, reconnect your 500 GB drive in the Optibay (if you this road main Bay) will be Windows blue screen in most cases.

  • HP Envy 14-1200 Prod # XQ103AV: "we could not create a new partition or locate an existing one. See the Setup log file.

    System - HP Envy14 - 1200 Beats Edition Notebook PC Series - product # XQ103AV.  It came pre-installed Windows 7.

    Error message "we could not create a new partition or locate an existing one.  See the Setup log file.

    appears in the new installation of Windows 8.0.

    Installation of MS Windows 8 DVD detects the hard drive OK.

    Software mini of Partition of the tool (3rd part) detects the hard drive OK.

    Windows 8 DVD software both MiniTool detects the disk partition and its OK formatted, but the error message is displayed to prevent installation.

    Here are the steps that I tried to solve the problem, but it won't work.

    1 opportunity Microsoft Windows 8 DVD diskpart to clean HD, to partition and to format... always get the same error message.

    2 opportunity Microsoft Windows 8 DVD diskpart to clean HD and partition... always get the same error message.

    3 MiniTool Partition software used to clean the HD, partition and format... always get the same error message.

    4 MiniTool Partition software used to clean HD and partition... always get the same error message.

    5 has bought a new hard drive repeat steps 1 to 4 and I got the... its error message.

    Background

    I have upgraded to Windows 8 Windows 7 and it worked for 2 months, then I upgraded to Windows 8.1.

    After that the system is being updated and restarted, the screen turn black.  So I decided to re - install Windows 8.0.

    There is no SIM card in the laptop.

    Help, please...

    I managed to do work Ok. Use Windows 8 DVD to run Diskpart

    1 delete the partition.

    2. restart the system.

    3. allow Windows 8 DVD to perform the partition and format the HD.

  • Installation of Hyper-V T420 2012: "we could not create a new partition or locate an existing one.

    Try to install Hyper-V (hypervisor bare metal, not a role) on T420 with PERC H710, receive an error message:

    "We could not create a new partition or locate an existing one. For more information, see the Setup logs files. »

    (Don't even have the slightest idea where search "Files Setup logs" - do not think that the Setup program has a place for them to write).

    What I'm doing wrong here?

    The waiter came with a RAID1 mirror previously partitioned on H710 (the rest of the readers - still not configured); Double SD cards with the hypervisor, VMWare (to be erased or left alone).

    Thanks in advance for any ideas.

    After you disable the internal SD card slot, the installation ends without incident.

  • I install Windows 7 on a new hard drive, but the installation gives an installation message could not create a partition or locate an existing partition.

    * Original title: installation of windows 7

    I install Windows 7 on a new hard drive, but the installation gives an installation message could not create a partition or locate an existing partition. Why installation does not create a new partition.

    Try the following

    Boot from the Windows 7 DVD

    Click Install now

    Accept the license agreement

    When the option is displayed to select a type of installation, click (Custom advanced)

    Press SHIFT + F10 from your keyboard

    type the following commands

    DISKPART

    Press enter

    the list volume

    Next, you select the volume where you want to install Windows 7

    Type: select disk #.

    # represents the number of the volume

    Type: clean

    convert mbr

    create the primary partition

    assets

    format fs = ntfs quick

    output

    output

    Try to reinstall.

  • Setup could not create a new partition system

    Ok.  I just built a new rig.  ASUS P55 intel chipset mobo.  I have two WD Caviar Black hard drives and a RAID-1 array.

    I installed my OEM WIN-7-64 operating system several times.  Mostly because my WUSB54GC Linksys adapter wireless crashes my OS WIN because of a compatibility problem.

    Long story short: the last time my OS crashed he would not be stopped, kept grinding and grinding so I stopped it "hard."  Then when I tried to restart it kept a black window stall without launching.  So I decided to start over with a clean install.

    Big mistake!

    When I got to the place where you want to install? I had onlyl only one possibility, I created a RAID-1 array with 1 TB WD caviar drives two of the screen.  Then, I started to FORMAT it the disc for the drive I want to install WIN 7-64 on.  That was the big mistake.  Previously, I was able to install WIN 7 several times, but after formatting the HARD drive, I received the message "Setup could not create a new partition system.  I can't find the logs and I tried all of the suggestions that I have found here and does not.

    I have an ASUS P55-Deluxe mobo with two 1 to WD Caviar black HDs in a matrix RAID-1.

    I tried to reinstall WIN 7, with the HDD BIOS on IDE.  It worked once in what concerns the installation of the OS, but whenever I try to recreate the RAID array, I get the bloody message "Setup could not create a new partition system!

    I tried using partition of drive on BACK in but nothing works.

    Of course, here, someone has the same problem and has a solution.

    Help, please!

    Hi Steve,.

    On another forum, I read to remove the battery from the motherboard and wait 10 minutes before turning.  Not only did it clears the CMOS memory, but "remains".  After that, I was able to partition my RAID-1 disk, format the partition, load my drivers and install WIN 7.

    Thanks for the quick response!

  • Cannot install Windows 7 error USB "Setup could not create a new partition system.

    Windows 7 install gets o Acer Aspire 5100 hard (perhaps by EzBack Pro II)

    So the problem is that I want to install windows 7 (from USB, no more details coming soon), but it gives me the error "Setup could not create a new partitiojn system or locate a system partition. See thwesetup for more information log files".

    I flashed the bios because caouldn can't EzBackPro II freaking be uninstalled on vista.

    I formatted all partitions and have now 1 x 150 GB partition (still the partition OEM.. angyr I because recovery tools did not work ~. ~)

    now I want to install windows 7 and it does not just ;/

    any help? I hope that I destroy my laptop ;/

    Hi Grasmanek,

    You can try to dollow steps and check if it helps you to difficulty of installation of Windows 7 from a USB.

    (A) have no USB stick plugged in when the computer starts.

    (B) in the configuration page that says that you can load other drivers, insert the USB key, then click on the link and load drivers.

    (C) disconnect the USB.

    (D) to continue with the installation and check if it ends well.

     

    Access the links below and make sure you follow the steps mentioned in the items to install Windows 7 from a USB key.

    http://TechNet.Microsoft.com/en-us/magazine/dd535816.aspx

    http://Windows.Microsoft.com/en-us/Windows7/installing-Windows-7-on-a-NetBook

    http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-from-a-Windows-7-installation-disc-or-USB-flash-drive

    I hope this helps. Let us know the result.

    Thank you and best regards,

     

    Srinivas R

    Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Setup could not create a new partition or system to locate a system partition.

    Today, I decided to re - install windows 7 to make it was once again, after saving all necessary files on my edge 1 TB hard drive restartrd windows with the retail CD in the CD drive. I pressed F12 and chose to start with the CD rom, now after several minutes while the CD was put into service, I informed all language settings, keyboard and time and press Next. Then clicked install now.
    ...
    ...
    About 10 minutes later, the next set of options showed, Normal install and custom install. I clicked customized. I then progressed to formate the hard drive and then click to select and then pressed...
    He been said now, "Setup could not create a new partition system or locate an existing partition in the system. So I tried to fix this by removing the primary hard drive and the other disappeared two (excluding the 1 to one). So I then clicked new on this 150G hard drive and then clicked on, it now says the main hard drive. I then clicked Next. ..
    The same thing, "wa unable to create a new partition system or locate an existing partition of the installation system. now I'm stressed and I really want to fix this today, so I came to the internet.

    Please can someone help me?
    -Sent from my iPhone.

    Disconnect the SATA cables to all your drives except the drive hard that you plan to install Windows on and the DVD player. Also unplug all devices except for the keyboard and mouse enternal.

    Then, enter the BIOS and configure the DVD drive as the first boot device.

    Now try the reinstall.

    JS
    http://www.PAGESTART.com

    Never be afraid to ask. This forum has some of the best people in the world to help.

  • My new computer came with a partitioned hard drive. I have not create the partition. What is it?

    original title: Partition of mystery

    I just got a new computer. It has a 2 TB hard drive that apparently has already been partitioned, creating a drive E. I have not create the partition. The files on the partition are old EULA, the .cabs, and .dll files, but this that baffles me, is that the two disks are the same size, 2 TB. It is the size of the disk itself. Whence comes this extra drive, and how these two readers may overlap?

    Should I remove this extra drive and if so, how can I do?

    Thank you

    Tim

    Wait, I'm CONFUSED! YOU can not HAVE a PC THAT IS 4TB SIZE!


    EDIT: Sorry, but Acer installed 2 HDD. (Wow!)

    Be sure not to remove the 2nd partition, because it IS a recovery or backup disk.

  • Could not create a new partition or locate an existing journal of one.see configuration file

    Separated from this thread.

    I get the same error 'could not create a new partition or locate an existing configuration one.see file log', but I install windows server 2012 R2, datacenter edition. I tried the steps above and it has not changed anything. Help please!

    Salvation of demonstration,

    We have a dedicated team working on Windows Server 2012. I suggest you ask your question in the below link:

    https://social.technet.Microsoft.com/forums/en-us/home

    Hope this information is useful.

    Thank you.

  • Setup could not create a new system partition or locate an existing system partition

    After the removal of ubuntu, I decided to reinstall windows 7. To my surprise even after formatting the drive to NTFS, I get the following error when you try to install, "Setup was unable to create a new partition system or locate an existing partition in the system."

    I would appreciate it if explain you how to fix this, rather than post links.

    Use the Creation Wizard to Partition (free version): http://www.partitionwizard.com/free-partition-manager.html

    First create a bootable CD: http://www.partitionwizard.com/partition-wizard-bootable-cd.html

    Boot from the CD and Partition Wizard to delete all existing partitions and rebuild the Master Boot Record (MBR).

    Then using partition Wizard create a 350 MB NTFS partition, mark it as a 'System' and 'active '.

    Then, create a partition for Windows 7.

    Boot from the Windows 7 installation media, and when asked where you want to install Windows select the partition that you created for Windows using the Assistant Creation of Partition.

    J W Stuart: http://www.pagestart.com

  • Bootcamp partition is not as boot drive, after running bootcamp to install Windows 10 on MacbookPro 15 "El Capitan running

    Hello

    I'm trying to install 10 Windows on my Macbook Pro. I followed this guide, but I am stuck between steps 3 and 4. In disk utility, I see that the bootcamp partition is created, but it does not appear as boot drive. I also tried to start my mac while pressing the option key, but still it will not show.

    See below for a screenshot that shows the current state of my machine.

    How can I continue to install 10 Windows on my Mac?

    Your BOOTCAMP partition internal not yet have Windows installed on it.  If you're between steps 3 and 4 (the installation procedure standard), your, assistant Boot Camp should automatically rebooting your computer after partitioning, from the installation media (Windows 10 CD), you must have created.  I assume that you already have a Windows 10 installation disk.  Make sure that the disc is inserted when you first enter assistant Boot Camp and you let the computer restart on its own.

    Apple instructions are a bit vague (somehow I'm not surprised).

    Watch (time code 04:26 - 09:15) in next video for instructions (https://www.youtube.com/watch?v=1SxA_OsPEgk).

    Good luck.

  • I have a hp compaq pressario c797ee, I not create recovery disk and lost data. Help, please.

    I not create recovery disks, in fact could not create because the DVD could not be the installation program appropriate for the burn. When I realized how do it, I had already deleted the recovery partition and had lost data recovery. The name of product HP Compaq pressario C797ee, the operating system is Windows Vista Home Basic Edition. Please tell me the link where I can download the recovery disks from which any alternative appropriate.

    Hello

    Please use this:

    http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?objectID=c00810334

    Kind regards.

  • HP530: recovery partition has not installed

    Reinstalled the operating system, destructive, with SE recovery disks. The recovery partition has not been installed. Any comment as to the reason would be appreciated. Thank you.

    Hello

    No, your brand auto recovery pricing won't recreate the recovery partition. If you want to re-create the recovery partition, you need a set of HP to perform the factory restore.

    Self made pricing factory restore will only effect C: partition

    Kind regards.

Maybe you are looking for

  • 24 hour format rest

    Hello I work with data that has a timestamp of 24 hours that are associated with. Sometimes, the data will be timestamped 11:59:59.999... and then come back 00:00:00.000... However when bringing these data in the VIEW tab with another channel that ha

  • event for broadcasting images of TCP/IP

    Hi all My request has currently 2 devices using TCP/IP on stream of framework to 100ms and 50ms data refresh to a PC. I would like to change the polling for data to generate an event when the data arrives, but I'm not sure how to proceed. I have curr

  • Product: Windows operating system ID: 256 symbolic name: WRN_INTERFACE_CHANGE_TIMED_OUT

    I am unable to get my laptop in STANDBY MODE and check for the problem, I got the info: Product: Windows Operating System: Event ID: 256: Source: PlugPlayManager: Version: 5.2: symbolic name: WRN_INTERFACE_CHANGE_TIMED_OUT:Message: Timed out sending

  • Latest version of the Firmware for a-300 Alpha?

    What is the latest version of Firmware for a-300 Alpha? My camera shows ver 1.00 Sony issued an update?

  • Indexing is running not - what can I do.please?

    I tried to get my running Indexing program and have looked at my help information and tried to follow the steps to do this without effect. When he is in the first part which should indicate "Click to EDIT" Modify does not appear! I click on DEFAULT t