Partition is not on the local machine

Similar Questions

• 'not on the local disk file' warning when it is absolutely

  Use DreamweaverCC2014 for the first time. Work on a MacPro running old Yosemite.

  I define a new site, specifying the directory in which the files of my site are stored. The site has a single page named index.htm, in the root directory, which has a link to a CSS style sheet named 'main.css' in a directory named "_css". The CSS file is contained in the directory and will appear in the Dreamweaver files as expected tab. The link to the style sheet is properly trained on the index.htm page.

  In the top left of the workspace, I see two buttons: one for 'Source Code', which, when selected, displays the source code of the page, I'm working. Next to it is a button that says 'main.css', which is EXPECTED to open up the CSS page and change it. However, when I click on this button, I get an icon of the caveat, as well as the message that says:

  "'main.css' is not on the local drive."

  Next to this is a link that says 'Get', which I suppose, when clicked, would allow me to find and recreate a link to the style sheet. However, such is not the case. Instead, I get a warning window that says:

  "' main.css isn't in a defined site.

  When I look at the page in Live View mode, the style sheet appears not, rather just the sheet without style. Looking at it in a browser, however, don't.

  The code is correct; I checked one re-checked it. The files are all in place and appear as expected in the files Panel. Any thoughts on why Dreamweaver think this CSS file does not exist?

  As this question decreased my confidence in using the software for a project of criticism, I contacted Adobe technical support for assistance.

  It is a known problem.

  The problem has to do with DW 'confused' if there is another file in the disc root of site that may have the same name. In my case, there was (I tend to name the CSS files for my sites with terribly generic 'main' designation). The representative suggested that I create a completely new site root, which put my file structure and see if the problem resolves. I did two things:

  First, I installed a brand new installation of DWCC2014 on my MacPro laptop. Existing site no file any on this machine. Then, I created a new site, using a copy of the files in my original troublesome site structure. Except that it's on a machine that has no other sites or files, I repeat the test using the exact same files and the structure of folders. When I click on the button Source Code, I see the HTML source code. And when I click the CSS button CSS file displayed as expected!

  Next experience... back to my MacPro desktop. I copy the site files on a hard drive that is completely different from the one I used in my failed attempt earlier to make it work. Once again, even the files and structure, only difference is the different physical location of files on a hard drive. The HTML source code is displayed, and when the user clicks the button, CSS, CSS page also displayed as expected. Problem solved!

  So, I hope that my experience (and the solution) are useful in case others run into the same issue. Yet once, it is a problem known to Adobe, so chances are good, one of you will have this problem. The solution is to place your files into a whole new site root out any who might have similar file names, not to "confuse" DW.

• Launching applications from partition Bootcamp without starting the virtual machine

  Hi all, installed Fusion because my colleague was furious about how you can launch applications without even opening the windows. But I was not able to do. I use a Bootcamp partition and is not, and I'm assuming that this is the reason why this feature is not available for me, but if someone could shed some light on this would be great!

  Thank you

  I think that your colleague is a bit confused. By definition, any product of virtualization to run a prompt to perform a request for comments. If you start in Unity mode, you might see Windows not running, but it's there. I suspect that what your colleague is talking about is the suspension in Unity mode. If you then start a Notes application, the virtual machine will resume, and since it is in Unity mode, it will appear to run the comments without Windows display application.

  Run a Boot Camp virtual machine means that you can not suspend (or snapshot, but that is irrelevant to this issue) because this can lead to corruption of the disk.

• HP Support Assistant on my laptop or desktop does not detect the other machine.

  HP Support Assistant on my desktop or my laptop does not detect the other machine.  They are both on the same network.  Both are HP machines. Both are running Windows 10.  Is normal.  I would like to kind of monitor my desktop with my laptop when I'm away from home.

  @bmedbury

  The behavior you describe is normal - the HP Support Assistant is a program "per computer", in other words, each program HPSA lies and keeps track of just a computer on which the program is installed.

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  My answer-click accept as Solution to help others find answers.

• TV Guide will not retain the local settings. There is no user.js file. How can I fix it?

  TV Guide will not retain the local settings. After that the closure of the site reverts to the default settings. There is no user.js file. Delete the prefs.js file did not help. Any suggestions?

  If Web sites don't remember your personal information, it is likely that Firefox is set to remember any cookies after the release. You must configure your privacy settings to remember - see the parameters of privacy, and-not-track browsing history.

• Java with Minecraft error "error: could not create the Virtual Machine Java.»

  When I try to open Minecraft SP, it won't let me open and there is a message saying:

  "Error: could not create the Virtual Machine Java.".
  Error: A fatal error has occurred. Program will exit. »
  How can I solve this problem?

  Hello

  What is the operating system installed on your computer?
   
  You can ask your question on the Minecraft forums for assistance. Check out the following link.
  http://www.minecraftforum.NET/viewforum.php?f=1002

• microsoft.jet.OLEDB not on the local computer?

  I tried to install a drive, but trying to open it I get the error message microsoft.jet.OLEDB not on the local computer. I have windows vista 64-bit. Thank you.

  http://social.msdn.Microsoft.com/forums/en/adodotnetdataproviders/thread/45aa44dd-0e6f-42e5-A9D6-9be5c5c8fcd1

  It seems to me to see with you have Vista 64 bit.

  "There is no 64 bit version of jet which is the reason why you get this error.

  Read the link above.

  Are what disc you referring?

  See you soon.

  Mick Murphy - Microsoft partner

• files appear in Dreamweaver, but not in the local folder

  I have set up and set my site... I listed paintingfrance as my local folder where I would like my stored files. So when I opened Dreamweaver, I see all the files on the local folder... tab but when I go to my hard drive and look under the Files\paintingfrance program, the folder is empty. I can edit the files in Dreamweaver and download them - that everything works well, but it's a mystery why they are not in the local folder on my computer.

  You have probably two folders named paintingfrance on your computer.

  Do a search for files with the same name and when you have found the site folder, delete the empty folder in Program files.

  The Program folder files is where the programs install themselves, should not be used to store documents.

• Problems downloading a file of muse for the first time. Museutils.js is not on the local disk on the file index.html.

  Hi all

  I hope someone can help because I'm a little desperate.

  I started to design a page with a muse of Qooqee model: SENSE.

  I worked for a month on this issue. When I was about to finish, I got a message that there is a new version of Muse to update. I did the update when I was still working in the design.

  When I finished the desktop version, I downloaded using the "upload to the ftp host" button. All fine until he has gave a "error on the index.html file.

  

  So, I was unable to complete the first uploaded to the online page.

  My husband, who knows a bit about coding, opened the index.html file, and we have seen a warning: MUSEUTILS. JS IS NOT ON THE LOCAL DISK.

  

  Reading questions similar to the forum that I can guess that the problem has been built with I started with the earlier version of the Muse and updated the Muse version in the workplace, when I finished the page.

  Now, the page is not alive because I am not able to download the file.

  I don't know if that's the problem, however. I downloaded a fresh sense of QooQee model and erase all content and pages name I will use them (he has added a few pages and I moved the contact page somewhere else on the site map). Then, publish the page Go Daddy and have the same problem. Error on the index.html file. For that I am lost again, because everything has been done with the same version of Muse and the latest model of sense (I don't know how they update the models).

  Can you please give an idea on how to solve the problem? What I have to redo the entire page?

  Thanks in advance, you are my last hope.

  Good to see that we can exclude a Muse for the functioning and the collection of production. The problem must lie in the specifics and/or requirements of GoDaddy, hosting provider. The Muse team is very aware of being a very popular hosting provider GoDaddy , so they want to learn all the occasional problems or quirks that might appear with Muse in combination with these suppliers. It might have to do with the current version of Muse, but it could also be a coincidence that GoDaddy has begun to change some things on their side as well. Or it could even be a Gremlin (colloquial term for a software bug temporary and inexplicable) blocking a circuit which seems to happen from time to time...

  Are you sure that you follow all the advice and guidelines in this FAQ: download an Adobe Muse of the site to a third-party hosting service ?

  Hang on!

• Could not open the virtual machine

  I used the customer convertor to create this virtual machine from one which works well on ESxi.  When I try to open on Win7-64 machines running vmplayer 3.1.4 I get the following error:

  Could not open the virtual machine: file "D:\Data\VM Machines\WW S2008_32\WW S2008_32.vmx 10_1 10_1" line 1: syntax error.

  Any ideas?

  "" "WW 10_1 S2008_32.vmx.zip" attached file contains the "WW 10_1 S2008_32.vmx" file created under VMware Player 3.1.4 and was then modified to reflect the values of parameter that you might want to stay the same as uuid etc.  Start VMware Player and then check the settings before running the virtual machine.

• Getting error: could not open the Virtual Machine: failed to query the Source for more information

  When I have a virtual machine to export to the FVO on an ESXi 4.0 and then try again to import the FVO on VMware Player or Workstation 7.1, I get the following message:

  «Could not open the Virtual Machine: failed to query the Source for more information.» I can successfully re-import this file OVF in an ESXi server without any problems. Anyone know why this is happening and what can be done to remedy this?

  Thank you

  Christopher

  Hello.

  Try to use ovftool to convert a VMX of the FVO.

  Good luck!

• Impossible to get 'notes' of the virtual machine

  I tried to use a powershell script to get information from the virtual machine. I can get VMHost, VMname and GuestVersion using the script in the following, but failed to get the notes of the virtual machine. Anyone know why I can't get notes, please help me with that. Thank you in advance.

  report = @)
  foreach ($vmView in (Get-View - ViewType VirtualMachine))
  {
  $report += $vmView. Select-Object @{Name = "$vmhost"; Expression = {($vmView.Runtime.Host Get-View).} Name}},
  @{Name = "VMName"; Expression = {$_.} Name}},
  @{Name = 'Notes'; Expression = {$_.} Description}},

  @{Name = "GuestVersion"; {Expression = {$vmView.Guest.GuestFullName}}
  }
  $report | Sort-Object VMName-descending | Export-Csv "d:\vm_GuestVersion.csv" - NoTypeInformation

  There is no need to do it with the cmdlet Get-View.

  You can do

  $report = @()foreach ($vm in Get-VM){    $report += $vm | `        Select-Object @{Name="VMHost"; Expression={($_.Host).Name}},            @{Name="VMName"; Expression={$_.Name}},            @{Name="Notes"; Expression={$_.Description}},            @{Name="GuestVersion"; Expression={$_.Guest.OSFullName}}}$report | Sort-Object VMName -Descending | Export-Csv "d:\vm_GuestVersion.csv" -NoTypeInformation
  

  If you want to do with the cmdlet Get-View for any reason, you can do

  $report = @()
  foreach ($vmView in (Get-View -ViewType VirtualMachine))
  {
      $report += $vmView | `        Select-Object @{Name="VMHost"; Expression={(Get-View $vmView.Runtime.Host).Name}},
              @{Name="VMName"; Expression={$_.Name}},
              @{Name="Notes"; Expression={$_.Config.Annotation}},
              @{Name="GuestVersion"; Expression={$vmView.Guest.GuestFullName}}
  }
  $report | Sort-Object VMName -Descending | Export-Csv "d:\vm_GuestVersion.csv" -NoTypeInformation
  

  But note that as you need a view of the GET each time for the host name, performance will suffer.

• I just installed DW 13.2.  Linked files (all CSS, scripts...) "are not on the local disk" - all works in CS6. Help..?

  I just installed DW 13.2.  Linked files (all CSS, scripts...) "are not on the local disk" - all works in CS6. Help...

  When I insert one of the page of the Web site, it shows in the design window.  But when I try to bring any document linked in the left window, code, it is empty and the message says: "whatever.css is not on the local drive.  Also, when I click on LIVE, the file looks like she does not see the file CSS, no images.

  The same site looks and works OK in the DW CS6.

  I'm on Maverick - 2012 Mac Pro - 2 x 2.66 12-core, 64 GB of RAM.

  I configured the same way as CS6 preferences.  Same location of the site, same links.

  Am I missing something?  What should I do?  I uninstalled the DW CC, cleaned pref and installed it again.  Same question.

  Help, please.

  I think, I solved the problem, but I still think that the Dreamweaver does not recognize the addresses.

  I then drive CC_A BB_A Web sites (these are the actual names of the readers).  It's always the disk 'data', apart from the OS, but with a different name.  everything works.  Opening files referred to in the script window, 'live' works as supposed.

  I can only speculate that readers 'CC_A' name has confused the program called CC.

  I can find no other explanation, since, in addition to the name of the drive - everything else is the same.

  Thanks for trying to help.

• Stage of JavaFX Builder 1.0 error: could not create the Virtual Machine Java.

  Hello
  I have installed JavaFX scene Builder under Windows 7 x 32. The installation process is OK, but when I try to launch the app it crashes and displays an error that says:
  "Error: could not create the Virtual Machine Java.".
  Error: A fatal error has occurred. Program will exit. »
  
  I installed JVM 7u5, JDK 7u5, JavaFX SDK 2.1.1 JavaFX 2.1.1 (Java EE JDK + Glassfish) I would be grateful if someone could tell me if there is something missing. I reinstalled almost all software java several times, but without success.
  
  Kind regards!
  
  Published by: 942925 on June 26, 2012 10:23

  Hello

  This message appears usually when the JVM cannot allocate sufficient memory. It may be the consequence of the stage Builder set - Xmx1024m command line: this is currently followed by default TLD-4515 and will be fixed in the next few weeks.
  For the time being you can give a try on a system with more memory. Moreover, what is your current hardware configuration?
  Concerning

• DW CC - files associated with "not on the Local disk.

  In Dreamweaver CM³, the files associated with, shown as tabs at the top of the currently opened file, now do not open their content in the file. So by clicking for example header.php would have brought the content to header.php, now a message pops up saying 'header.php is not on the local drive. Opening in the list of files shows the contents of the file perfectly. It started to fail today. The same file still open from the tab correctly CS6 for something in the CC is the cause of the problem. All the site files are on an external drive connected to a Mac BookPro and they have been for years without any problem. Any ideas why this problem started?

  In fact, Jean Fritz II hit the answer.

  There was a double file/directory of Macintosh HD under the main Macintosh HD and another Dreamweaver folder in there. Once I've trashed those, he started to work perfectly!

  Thank you

  Mike