Why my iPad doesn't load after update to iOS10?

Similar Questions

• Why the network does not work after update to ios10?

  I can't make and receive calls. In addition, I can't send and receive messages.

  Reset your network settings. Tap Settings > general > reset > reset network settings. This also resets the Wi - Fi networks and passwords, cell parameters and VPN and APN settings you used before.

  If this does not help, try here > If you can not connect to a cellular or cell - data Apple Support Network

• IPad 2 Air after update to iOS10 wifi turns off automatically.

  IPad 2 Air after update to iOS10 wifi turns off automatically.

  Hello. Could you please identify your router? Also try to describe a little more when it stops, and you can reconnect after that.

• Why I can't run iPhoto after update to Yosemite 10.10.5?

  Why I can't run iPhoto after update to Yosemite 10.10.5?

  With no details we cannot guess... have not updated to iPhoto? What version do you have?

• iPad will not activate after update to 9.2.1

  iPad does not illuminate after update to 9.2.1 we get the white Apple then disappears and nothing...

  Try a forced reboot. At the same time hold the sleep and home buttons until the Apple logo appears on the screen.

• IPad 2 Air battery drained and does not load after update 9.3

  Air iPad 2 (Wifi + cell) battery has completely evacuated and no charge since after update 9.3. Update my device was 100% of the fees. Subsequently, when the update was finished, the Unit continued to lose the load during use (I got the full enjoyment on the charge) and does not charge even on not trying to load intermittently and for long periods. Once the load is complete evacuated after considerable use, I was unable to see the unit after 2-3% fees.

  I have restored and updated the device via iTunes, but the problem persists, and I see a battery on the scree with 3 red lines. When I take off the charge cable, I get a black screen with battery 3 red lines and a chart of the charging cable.

  I had once the apple logo and the ipad started and I had the interface momentarily, but he lost.

  I have been struggling with this for the last 4 days and have tried almost every single suggestion there. Connection to the support of people was not possible on the web. And I am currently in another country where he sold the IPad to be able to switch the device back to the Apple Store to have checked out it during the warranty.

  Any suggestions are welcome. TIA.

  Well, I had the camera to load up to 61% where it is blocked again.

  Here's what I did that I had not done earlier out of the many resolutions that I tried from that provided in the forums and on the internet-

  I put the IPad for a couple of hours in his keyboard case and then all located in a thin cloth and put it on charge, ostensibly to warm a little battery. The warm-up was suggested in another thread, where a person even went to the extreme of using a fan hair dryer to warm the device. After a few hours, he did to load up to 60%, I got it out to check if it worked.

  Maybe I shouldn't have checked and waited a little longer, because the IPad is now stuck at 59 to 61% for the last 14 hours for free. I still struggle to go beyond this percentage, but at least I can use the device. Is there something I can do now to improve the percentage of charge? I tried the resets and even restored and updated the iOS through iTunes.

  Hope the above helps someone.

• iPhone 6 won't load after update 9.3. Can't turn on despite the wall load.

  Update iPhone 6 to 9.3 two weeks ago. More later arrested ten days of load. Does not load. Cannot update 9.3.1 because the phone does not illuminate. Please notify. I tried recovery tent. But no power, therefore cannot be updated. Wall charged through the cable and charger OEM.

  If you have already tried troubleshooting mentioned in this article, and still not load or lights, you will need to check out by Apple or an Apple authorized service provider.

  If your iPhone, iPad, doesn't respond or won't turn on - Apple Support

  Apple iPhone - contact Support - support

  Find an Apple authorized service provider

• Mailto doesn't work after updating FF 42.0

  Mailto doesn't work after my last update. The entrance of mailto is not under Tools > Applications and there is no drop-down list to add an entry. My default e-mail program is Windows Live mail.

  Hmm, mailto certainly should not be missed.

  Sometimes, the file that stores these actions of the Manager/download application is damaged. As it is difficult to change, when there is a problem, we offer usually when you rename the file and allows Firefox to rebuild the Windows registry. Who cannot help if mailto is missing from the registry, but I think it's worth a try:

  Open the settings folder (AKA Firefox profile) current Firefox help

  • button "3-bar" menu > "?" button > troubleshooting information
  • (menu bar) Help > troubleshooting information
  • type or paste everything: in the address bar and press Enter

  In the first table of the page, click on the view file"" button. This should launch a new window that lists the various files and folders in Windows Explorer.

  Leave this window open, switch back to Firefox and output, either:

  • "3-bar" menu button > button "power".
  • (menu bar) File > Exit

  Break while Firefox finishing his cleaning, then rename the mimeTypes.rdf to mimeTypes.old (or another name of your choice, in the case where you decide to roll back this experience).

  Launch Firefox back up again and return to the Options page to specify your preference. Mailto appears once more?

• Cutmaster plugin doesn´t works after update to Illustrator CC 2015

  Hi, someone at - he saw the problem with the plugin Graphtech´s Cutmaster after update to Illustrator CC June 16, 2015 2015

  Any solution, anyone?

  I hope ;-)

  / Patrik Liedgren

  If it worked in CC2014, then fall back to this version. For a plugin update, contact Graphtech.

• Why is taking hours to load after the last iTunes update?

  I have Windows 7. I don't know even how long it actually takes to potentially - more than 2-3 hours - open 6-7 hours. I woke up this morning and it was finally opened after I clicked on it last night. This is certainly new behavior with the last update. The document "about iTunes" is quite annoying, because in fact it does not specify which version is installed - this should be at the top of the document, I think. However when I run "Apple Software Update" it says "your software is up-to-date." It is not very useful as a music player more if it takes 3 to 7 hours to open - pretty amazing honestly. In addition, it does not show even any UI again. The Task Manager Windows says that iTunes.exe and iTunesHelper.exe are running and showing 0% CPU, so it doesn't seem to do much. That's happened? This is unacceptable.

  More information: it seems to be stuck in the Windows kernel somewhere as "taskkill /f /im itunes.exe" is not actually kill him - even though it claims too - she is still ongoing in the Task Manager and rekilling he said the same thing:

  Good C:\Users\David > taskkill /f /im itunes.exe

  Success: The process with PID 28976 "iTunes.exe" ended.

  Good C:\Users\David > taskkill /f /im itunes.exe

  Success: The process with PID 28976 "iTunes.exe" ended.

• Windows 7 Windows Update doesn't load after installation of Windows 7 Service Pack Beta, then Outlook 2010 (Outlook 2010 has attempted to change Microsoft Update, after 24 hours, I rebooted the computer) and now, Windows Update does not work.

  Windows 7 Professional 64 bit

  Windows 7 Service Pack (so that I don't get a bunch of file wrong mistakes of corruption when using svn)

  Outlook 2010 (it works but I had to restart Windows forcefully during the first round as she tried to change the update settings)

  Now I can not install XPMode and cannot run Windows Update.  There is no error, no errors in the log of events, loading just perpetually for initial load of XP Mode or Windows Update.

  How can I fix Windows Update?

  In this forum, you will find support for Win7 SP1 RC: http://social.technet.microsoft.com/Forums/en/w7itproSP/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• iPad 4 cannot load after upgrade to iOS 10

  Hi, I am using iPad 4.

  I've updated my iOS 10 device and I am quite satisfied with it, but when I load my camera it shows "do not load" - as usual saw when I connect the iPad to the PC.

  I'm trying to connect my iPad to the PC, and it can not connect at all (it connect less than one second and then disconnect from less than a second and then log in and out again, and so on).

  Is there a way to fix this without dowgrading iOS?

  Thank you!

  Have you tried a hard reset of your iPad by pressing the sleep/wake and Home buttons simultaneously until your iPad goes to black and restarts with the Apple logo and then release the buttons?

• air2 iPad does not work after update ios9.3

  Hello

  My iPad air2 does not open links Amy in safari or the mailapp after that I upgraded to ios9.3

  I tried a reset, but that did not work.

  There is a section in this troubleshooting article that talks about this problem. Take a peek inside. Something might work for you.

  http://osxdaily.com/2016/03/25/Troubleshooting-iOS-9-3-update-problems/

• iPad can not activate after update 9.3 iOS. "Incorrect Apple ID" used message, when it obviously isn't

  After the update to iOS 9.3 my 2 Mini iPad fails to activate.

  I get the message 'wrong apple ID' all the time, even if its my correct apple ID, that works on iTunes and iCloud, etc..

  I tried the activation via iTunes recovery mode and DFU mode, but nothing helps. I do not think it's a problem of server activation, this looks more like a problem with activation ID.

  I also tried to remove the device from iCloud, remove the device to locate your iPhone and even changed my password Apple ID.

  Is this a possible iOS Malware hack "Keyraider"?

  It is more likely that it is a bug on the Apple name, given the large number of threads with people having the same problem. Especially people with older devices.

  You may only be stuck waiting for them to sort out if restore via iTunes did not work for you.

• Windows does not load after update

  I just installed windows vista on my calculation, after that I return it. I had to reinstall windows and every time I do the windows update it restarts and when it turns back all that I get is a black screen with nothing load on this subject?

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not work:

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner