Partition missing at startup Bootcamp

Similar Questions

• Re: Missing Partition during startup Bootcamp

  Hello

  could you please please help me, I have the same problem, did the same thing! I have had this results

  < published by host >

  Please start a new thread and post the output of

  sudo dd if = / dev/rdisk0s5 account = 1 2 >/dev/null | hexdump - C

  disk0s4 is the new partition you created and Bootcamp moved to disk0s5.

• error in ms01ary.dll missing during startup

  error in ms01ary.dll missing during startup

  Hi TonyMagsino,

  (1) since when are you facing this problem?

  (2) what is the complete error message you receive?

  
  Method 1: Enable the boot and then check if the problem persists

  Follow step 1 in the link below,
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

   

  If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

  Continue with the remaining steps to pin-point on the third party service.

  After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.

  
  Method 2: if a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

• Windows Setup is unable to find a place to store temporary installation files. To install windows, make sure that a partition on your startup disk has at least 686 MB of free space

  Current operating system: Win XP

  New version: Win 7 Home premium downloaded from digitalriver (student version)
  The download went well and expanded on in the expandedSetup folder. When I click on the button 'Install now' on the configuration screen, it displays error
  "Windows Setup cannot find a location to store temporary installation files. To install Windows, make sure that a partition on your startup disk has at least 686 MB of free space. »
  The unusual thing only that I have in this facility, it is that I "shrunk" the volume existing XP windows C: 228 GB to 150 GB to make room for the new partition W: for windows 7.
  Here is the my drive details
  Total
  Disk 0
  Letter of free space size
  c: 150 GB GB 48.3
  W: go-go 78.0 78.1
  I: 54.7 47 MB MB (seems to be the DELL diagnostics dell partition)
  J: 4.63 GB 959 MB (seems to be the DELL partition with the original copy of OS)
  Disc 1
  free space of letter size
  M: g 78.1 29.8 GB
  N: 39.0 go-go 22.8
  X: 21.8 31.7 go-go
  Thank you
  Muthu
  I found the fix - made a bootable disc from the "expandedSetup" directory and booted from the disc. Look for the startup disk process in the solution of this tread

  http://social.answers.Microsoft.com/forums/en-us/w7install/thread/aedb1245-f8f9-42EC-9A0C-1aa932363bbb

• Installed Indesign CC 2015 and claims many plugins missing at startup

  Installed Indesign CC 2015 and claims many plugins missing at startup

  Choose about InDesign from the Help menu (Windows) or InDesign menu (Mac). You may have launched a previous version of InDesign and try to open an existing InDesign file.

• Partition missing Bootcamp after sleeping

  Hi guys,.

  I have the following problem. I have a Macbook Pro with OS X El Capitan 10.11.5 on it. I have multi boot, with 8.1 Windows it still works well, but I was in need of some extra HARD drive space on my OS X partition, so I was sleeping with a partitioner of third party and deleted by mistake a 200 MB required (I think than EFI) partition. After that, I was not able to boot to OS X, only point 8.1 Windows

  After a while of playing with it, I suddenly could start under OS X new. But, when I press the Option key at startup, my Bootcamp partition has now disappeared all of a sudden. When I went back to OS X and checked with disk utility, I could see the Bootcamp partition. Also in the floppy start, but when I chose the Bootcamp partition as boot drive and the Macbook restarted, I got the 'no such device' error while trying to boot Windows.

  So, I completely messed up something. I tried Windows recovery (reboot), but after this was not a success either, the whole Bootcamp partition is now gone when I check the disc utilities. So, maybe someone can help? Here are a few screenshots:

  

  

  

  

  Thank you very much in advance!

  Make no mistake.

  The partition GUID type is incorrect. What is the year/model of your Mac?

  Please download GPT Fdisk from https://sourceforge.net/projects/gptfdisk/ and install it. It will help you to correct the GPT.

• Partition missing Bootcamp after the upgrade to EL CAPITAN

  Hello

  Finally decided to upgrade MAVERICKS to EL CAPITAN.

  Unfortunately, I was not checking the compatibility of Bootcamp with Windows 7 running on it.

  After upgrade, only the OSX partition is visible (hold ALT key at startup).

  The boot partition on board still shows the Bootcamp partition, but I can't find/start with that.

  Read a few threads, it seems that EL CAPITAN using a BIOS that is more recent (EFI?) and Bootcamp + Win7 would require always old BIOS (MBR?)?

  I decided to use a Timecapsule backup back the MAVERICKS - which worked well.

  However, the Bootcamp partition is always considered to be NON-BOOTABLE.

  Now I'm out of ideas.

  Can someone help me so that I can start over the Windows, upgrade to Win10 image and finish the job?

  Thank you

  TC

  I also have the same problem - here to see the result

• Startup Bootcamp to fix repair partition

  Hello

  Here is the output in the following order:

  diskutil list

  Cs diskutil list

  sudo TPG - vv - r see the/dev/disk0

  sudo fdisk/dev/disk0

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 500,1 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_HFS Macintosh HD 250.1 GB disk0s2

  3: disk0s3 Apple_Boot Recovery 650.0 MB HD

  4: Apple_HFS 148.1 Untitled GB disk0s4

  5: Microsoft database BOOTCAMP 101,0 GB disk0s5

  No logical volume group CoreStorage found

  See the TPG: / dev/disk0: mediasize = 500107862016; SectorSize = 512; blocks = 976773168

  See the TPG: / dev/disk0: MBR suspicious to sector 0

  See the TPG: / dev/disk0: Pri GPT to sector 1

  See the TPG: / dev/disk0: GPT Sec at sector 976773167

  start index size summary

  0 1 MBR

  1 1 Pri GPT header

  2 32 table GPT Pri

  34 6

  40 409600 1 part TPG - C12A7328-F81F-11D2-BA4B-00A0C93EC93B

  409640 488385008 2 part TPG - 48465300-0000-11AA-AA11-00306543ECAC

  488794648 1269536 3 part TPG - 426F6F74-0000-11AA-AA11-00306543ECAC

  490064184 289181384 4 part TPG - 48465300-0000-11AA-AA11-00306543ECAC

  779245568 262144

  779507712 197265408 5 part TPG - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7

  976773120 15

  976773135 32 table dry GPT

  976773167 1 dry GPT header

  Disk: geometry / dev/disk0: 60801/255/63 [976773168 sectors]

  Signature: 0xAA55

  From end

  #: cyl hd s - cyl hd s id [Start - size]

  ------------------------------------------------------------------------

  1: EA 0 0 2 - 1023 254 63 [1-488794647] < unknown ID >

  2: AB 1023 254 63 - 1023 254 63 Boot Darwin [488794648-1269536]

  3: 1023 254 63 AF-1023 254 63 [490064184-289181384] HFS +.

  * 04:07 1023 254 63-1023 254 63 [779507712-197265408] HPFS/QNX / TO THE

  The partition without title is formatted in HFS, which is read-only in Windows. If you want to read-write, run the following command and the post that he is out.

  diskutil eraseVolume fat32 "SHARED" disk0s4

  Now to test the ability of reading / writing.

• Re-partitioned Macintosh HD and Bootcamp/Windows does not display on startup

  I had heard of people having problems, but I've heard talk about several good results than the previous. Now I can't start Windows when you restart. My BOOTCAMP folder is still there. My bootcamp drive is on ' disc 0s 5 ' but when I try to use the command line to collect information on this subject and so on that he says the resource is busy... I will send pictures. Any help or verdicts would be great appreciated. Thank you!

  Can you use [help] can not boot Windows (8.1) after resizing partition as reference and fix your MBR using Gdisk?

• Startup BOOTCAMP partition problems

  Hi, I've seen a few posts that are very similar to mine, but I can't seem to get to the bottom of this issue. Here's the background on what happened:

  I ran El Capitan on a single OS X partition and decided to run Boot Camp Assistant and install Windows 10 on a new partition. It worked perfectly, and I have been using Windows and start back. So, I decided that I would create a new partition for easy sharing files between the 2 BONES using a Fat-32 file system so that the two operating systems can have read/write access. I did it with the disk sideways utility Mac and everything seemed to go smoothly. Also, I don't touch my BOOTCAMP partition, but took all the space for the new partition on the side Mac. Everything seemed fine... until I tried to start again under BOOTCAMP. Now this partition is not recognized as bootable, but it is accessible from the side Mac and everything seems intact.

  I ran the command diskutil list and here is the result:

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 500,3 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_HFS Macintosh HD 361.5 GB disk0s2

  3: disk0s3 Apple_Boot Recovery 650.0 MB HD

  4: Apple_HFS SHARING 22.7 GB disk0s4

  5: Microsoft database BOOTCAMP 115,0 GB disk0s5

  Tylers-MacBook-Pro-3: ~ tylerdouglas$ diskutil info disk0s5

  Identifier of the instrument: disk0s5

  Device node: / dev/disk0s5

  Set: No.

  Part of the whole: disk0

  Device / media name: BOOTCAMP

  Volume name: BOOTCAMP

  Gendarmerie: Yes

  Mount point: / Volumes/BOOTCAMP

  Personality of file system: NTFS

  Type (Bundle): ntfs

  Name (Visible to the user): Windows NT (NTFS) file system

  Partition type: Microsoft Basic Data

  Operating system can be installed: No.

  Media type: generic

  Protocol: SATA

  Smart: checked

  Volume UUID: 1EF1A5FC-BEBE-4528-A0A2-6755D96E1AB0

  Disk / Partition UUID: 0F83EFE3-3E4B-4EAA-8C08-0590F3C60EAA

  Total size: 115,0 GB (114999427072 Bytes) (exactly 224608256 512-Byte-units)

  Amount of free space: 72.5 GB (72523272192 Bytes) (exactly 141647016 512-Byte-units)

  Device block size: 512 bytes

  Allocation block size: 4096 bytes

  Support read-only: No.

  Volume read-only: Yes

  Location of the device: internal

  Removable media: no

  Solid State: Yes

  My theory was that because the BOOTCAMP partition moved from 4 to 5, this confused sort of things. I decided that I loved not more to have the shared partition, so I erased it. Then I tried to delete this partition, but I am unable to do by using normal mode or recovery disk utility. I tried to disassemble and then delete in both modes. I scoured the internet looking for a solution and I am completely stuck. This seems like it should be a super simple solution, but it is frustrating that I can't understand it. I don't think that I've damaged or corrupted something and I just need to be able to start in Bootcamp.

  Help, please!

  Thanks in advance!

  Still have not solved this problem. Any help would be greatly appreciated. Thank you!!!

• Bootcamp Partition missing and does not appear in the terminal

  I have a MacBook Pro (retina, 13 inches, end of 2013)

  10.10.5 running

  I started the process of installing windows yesterday but ran into a few issues (type of drivers file missing DVD caveat which was in reality a use a Flash drive that is too big/fake) in any case, my various attempts resulted in the 50 GB of space, I partitioned using BCA to disappear. I've backed up with time machine and am ready to do a total restore at this point, but I am worried because the 50 GB is even not appearing in Terminal when I search for it. All other methods I've read on here in these last hours were the people whose music appears but just need to be repaired using fdisk or whatever.

  Im not to concerned messing too much I want to just get the thing started to restore so I can start over with the windows install. I need to know if, after doing a thorough cleaning of my reader im going to miss yet only 50 GB

  Here is a list of my Terminal:

  MY-MacBook-Pro: ~ MyName$ sudo TPG - r - vv show disk0

  Password:

  See the TPG: disk0: mediasize = 251000193024; SectorSize = 512; blocks = 490234752

  See the TPG: disk0: PMBR to sector 0

  See the TPG: disk0: Pri GPT to sector 1

  See the TPG: disk0: GPT Sec at sector 490234751

  start index size summary

  0 1 PMBR

  1 1 Pri GPT header

  2 32 table GPT Pri

  34 6

  40 409600 1 part TPG - C12A7328-F81F-11D2-BA4B-00A0C93EC93B

  409640 390899288 2 part TPG - 53746F72-6167-11AA-AA11-00306543ECAC

  391308928 1269536 3 part TPG - 426F6F74-0000-11AA-AA11-00306543ECAC

  392578464 97656255

  490234719 32 table dry GPT

  490234751 1 dry GPT header

  MY-MacBook-Pro: ~ MyName$ sudo fdisk/dev/disk0

  Disk: geometry / dev/disk0: 30515/255/63 [490234752 sectors]

  Signature: 0xAA55

  From end

  #: cyl hd s - cyl hd s id [Start - size]

  ------------------------------------------------------------------------

  1: EA 1023 254 63 - 1023 254 63 [1-490234751]

  02:00 0 0 0-0 0 0 [0-0] unused

  03:00 0 0 0-0 0 0 [0-0] unused

  04:00 0 0 0-0 0 0 [0-0] unused

  MY - Pro: ~ list of the MyName$ diskutil

  / dev/disk0

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 251,0 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_CoreStorage GB 200.1 disk0s2

  3: disk0s3 Apple_Boot Recovery 650.0 MB HD

  / dev/disk1

  #: NAME SIZE TYPE IDENTIFIER

  0: Apple_HFS Macintosh HD * GB 199,8 disk1

  Logical volume on disk0s2

  31C1D849-83DD-46DD-A44A-BD811B7FD3BF

  Unencrypted

  This line represents the free space.

  392578464 97656255

  97656255 * 512 / (1000 * 1000 * 1000) = 50GB or

  97656255 * 512 / (1024 * 1024 * 1024) = 46.5 giB

  My recommendation is

  1. back up OSX by using Time Machine - use Time Machine to back up or restore your Mac - Apple Support . The disks that you can use with TM are Backup that you can use with Time Machine - Apple Support .

  2. boot into Internet recovery - OS X: on OS X Recovery - Support Apple (CMD + Opt + R).

  3. clear your internal drives. Use the utilities-> disk utility to erase your internal drives. If this does not work, we can manually rebuild the disks.

  4 restore OSX using the links in step 1.

  5. run SMC/NVRAM reset without any connected external storage.

  6. run the wizard of BC and install Windows.

• Get the error message about the file cCNColms.dll missing at startup.

  I get the missing file from cCNColms to C:\windows\when dll I start and after connection as I administer. Can't find any help on the internet. I did a fixboot and have done several analyses. A fixmbr command showed that corruption but a fix can damage the disk partitions. Anyone have any suggestions? Thank you

  Using a Google search, I do not met that DLL and it has a special name, and is in the c:\windows folder so it sounds suspicious to me.  I would say that your system is perhaps currently or has been infected by malware.

  Because the MS Answers forum asks you to zero information on your system when a new question is asked, we know absolutely nothing about your system - and I would skip trying things.

  Read these instructions carefully and see what you can find:

  It is sometimes easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you fix the problem and difficulty not only the symptom of the problem by simply deleting the startup message.

  I would also not recommend you start digging in the registry to try to find the startup item and remove it unless you have a backup of your system or at least a backup of your registry, because there is no 'Cancel' or 'quit without saving changes' option in regedit.  If you make a mistake, that's all.

  These ideas relieve 'rapid' and sometimes risky of the symptom if they not even work at all, but they can't actually solve the problem.  Also, I'd be suspicious of ideas that begin with the words "try."  You don't need to try things, you need to fix things.  You don't need to try ideas that might work, you must do something that will always work all the time.

  Here are the detailed instructions that protect you and solve your problem in the 'right' way.

  There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them.
  A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
  It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
  Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
  So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.
  If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
  If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
  Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry. There is no cancellation or exit without saving the option in regedit.
  Here is a link to a popular registry backup tool:
  http://www.SnapFiles.com/get/ERUNT.html
  You can also use the Autoruns to find the element of start remains little matter where he's hiding
  .  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
  When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information
  .  You are really interested only a few sections.
  The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
  Scroll through the list and look for a boot entry associated files in the error message.
  If you can't find on the connection tab, look in any tab.
  You can also click file, search to search for logon, or any tab for all or part of the name of the element.
  Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can simply disable, restart and if the problem is resolved and then remove the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
  Given that you had or have an infection, followed with this:
  Perform scans for malware, and then fix any problems:
  Download, install, update and do a full scan with these free malware detection programs:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.
  Restart your computer and solve the outstanding issues.

• How to fix the fsck "your drive could not be partitioned..." Bootcamp does not

  Hello, after days of searching for a solution and try several times to fix this, I write a question.

  I want to create a partition with Bootcamp to install Windows 7. Here's what I made in the following order:

  1. Tried to partition with bootcamp, but he was only let me pick 32 GB or 1024 GB (which I did not available).
  2. Manually create the partition with utility disk and at the start of my flash, found that USB 3.0 drive / Bluetooth drivers don't would not load then ran in question where I couldn't go beyond 'select language' screen on Win 7 install.
  3. Tried to restart and delete my partition but noticed that I couldn't so I had to boot in recovery of the Internet and the use of the terminal commands and gpt, deleted the unused partition and used disk utility to merge it into main drive. I followed these instructions: deleted my bootcamp partition, but can not resize my osx partition
  4. Re-directed training camp and received the error "your drive could not be partitioned."
  5. Disc repair/check etc. ran and found errors.
  6. Run fsck by this thread that your disk cannot be partitioned. Win7 Bootcamp and still got here.
  7. Thought that maybe filevault caused outcome so disabled that. 48 hours later my 2.3 TB have been deciphered.
  8. Ran bootcamp, same problem.
  9. Run fsck, same problem.
  10. Currently using TestDisk to analyse the sectors on disk 1, correct? :

  

  

  I'm ready to create another partition manual if I can get drivers USB/BT to work.

  
  

  Furthermore, anyone know why there is a limit of 32 GB/1024 on the size of my partition for bootcamp? Why can't choose anything between the two?

  Data sheet:

  

  Thanks in advance for any answer!

  Please after the release of

  Cs diskutil list

• Accidentally formatted partition 0 disk 4 BOOTCAMP Windows 8.1

  Yesterday I bought Windows 8.1 and began installing Bootcamp. I got through all the steps and got to the page collection of information on the windows OS. I filled everything, product key and all. Then I got to the page of partitions, I chose 0 4 Partition drive. I then clicked format (not realizing really what it was). Once I couldn't install windows. He told me that the reader must be in NTFS format. I did not remove the main MAC OS. I looked at many solutions, but they worked not or that they were too old for my computer. I gave an amount of space to 243.21 to Windows. If someone could help it would be greatly appreciated!

  Data sheet:

  iMac 27 "end 2013

  Version: 10.11.3 OS X El Capitan

  Processor: 3.2 GHz Intel Core i5

  Memory: 8 GB 1600 MHz DDR3

  

  Hi, Overtile.

  Please visit Apple support communities.

  I see you are trying to install Windows on your Mac via Boot Camp and need help.  You have already created the partition, so you change the format of this partition to NTFS and then go through the installation.  I've included some guides below that will guide you through this process.

  Set up Windows on your Mac partition

  How to install Windows using Boot Camp

  See you soon

• The Mglsinp.dll file is missing at startup

  original title: whenever I reboot my Windows Vista system, I get a message that the file Mglsinp.dll is missing.  Is there a way to download this file?

  The error message is displayed when the reboot is almost finished.  I ran a registry repair program and it did not help.

  Hello

  registry cleaners are no although it is

  Google has nothing of "Mglsinp.dll".

  but for "mgls.dll.

  http://www.ProcessLibrary.com/directory/files/mgls/458090/

  Try, follow these steps

  http://support.Microsoft.com/kb/929833

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally madeprograms,Accessories, right-clickguest, and then clickrun as administrator. If you are prompted for an administrator password or a confirmation, type the password, or clickallow.
  2. Type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If the error persists after scanning use this program to out startup

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services even more. Autoruns goes way beyond the MSConfig utility bundled with Windows Me and XP.

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902