Re: Missing Partition during startup Bootcamp

Similar Questions

• Bootcamp deleted missing partition, but can not recover the partition space

  Tried to install 10 Windows via Bootcamp on my Mac. First, I formatted the bootcamp partition. Then I got the following message: could not create a new partition or locate an existing one. For more information, see the Setup logs files.

  

  I tried five times with Bootcamp installed Windows 10. Then I advice to delete the partition and create a new. So I did. Still did not work. When I rebooted my mac, 50 GB missing as you can see here:

  

  I tried to restore the partition, but there is no possibility to do so, as you can see here:

  

  I read so many posts that I don't know what to do anymore. I don't mind factory reset my macbook, but it will restore my lost partition as I probably only erase the 450 GB instead of the 500 GB SSD?

  I read in several messages (this one in general: Bootcamp Partition missing during startup) that this information might be required, so I added from the outset:

  diskutil list:

  

  Cs diskutil list:

  

  sudo TPG - vv - r see the/dev/disk0:

  

  sudo fdisk/dev/disk0:

  

  
  

  I hope someone can help me restore my 50 GB, I lost. Even once, I do not fear factory reset my macbook if that's the best way to solve this problem!
  

  Can you use doesn't have windows via bootcamp 8.1 installation as reference to reclaim your disk space?

• error in ms01ary.dll missing during startup

  error in ms01ary.dll missing during startup

  Hi TonyMagsino,

  (1) since when are you facing this problem?

  (2) what is the complete error message you receive?

  
  Method 1: Enable the boot and then check if the problem persists

  Follow step 1 in the link below,
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

   

  If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

  Continue with the remaining steps to pin-point on the third party service.

  After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.

  
  Method 2: if a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

• MBPro stops during startup.  If I continually move the mouse during startup, it will go on my desk.  If I launch Firefox and try to do anything, it stops.  This can be corrected?

  Mac Book Pro stops unexpectedly during startup.  I can get it to go to my office, if I continually move the mouse during the boot, but after I launched Firefox and try to do anything, it will stop.  If I try to run the scans of security or reinstall OS X using the command + R and disk utilities, it stops.  Sometimes it gives me a box saying something about stopping with various options such as Cancel, stop, reboot, etc., but it makes no difference that I click on, she stops.  Sometimes, I get no warning at all.  This can be corrected?  I'm not savvy Mac.

  Reset the SMC could solve problem then.

  Reset the management system (SCM) controller on your Mac - Apple Support

  Also try the safe mode boot.

  Try safe mode if your Mac does not end commissioning - Apple Support

• Realtek RTL8101 PCI Ethernet is in error during startup

  Hi all
  I have EDT recently bought by Satellite A200-1CN notebook PC series. I'm having a problem at the start of the system that has Windows Vista installed.
  The Realtek RTL8101 PCI Ethernet v 1.02 (060510) gives error during startup. The error is to run is as follows

  PXE - E61 Media Test failed
  MOF: Left PXE ROM

  Can any help with this problem

  Concerning

  Hello

  Hmm you ve you have a problem with the Vista boot! :|

  Usually, this message appears because the BIOS can not find a source of start-up as ODD or HARD drive and then try to boot from LAN.

  Perhaps the BIOS can not find HARD drive due to a hardware problem.

  Hmmm. First of all, you should try to change the boot order in the BIOS. Put the HARD drive as first boot device.
  Save the settings and try to restart the laptop. If it is not possible to start the Windows Vista I guess that HARD drive is dead!

  Have you tried to reinstall Windows Vista using the Toshiba Recovery CD? Check this box!

  If all this procedures don't help I recommend you contact the ASP in your country.
  The technician must check the laptop and if necessary, it should replace the HARD drive.
  Your warranty is valid so that everything should be done for free.

  Good luck

• Mini Mac restarts during startup until

  I have a Mac mini from 2012 which restarts to halfway through to boot the system. Reboot started while the mini was in mode 'sleep' and required a good force to stop. Now, the mini will begin to start but when the progress bar is half filled the screen goes blank for about 15-20 seconds, then goes black for a few seconds and then the mini attempts a reboot.

  I unplugged the power cord, but that did not help. I have also tried to keep the order and had "keys during startup but nothing doesn't change.

  Thanks in advance for any help.

  -Try to reset memory NVRAM/PRAM and SMC

  MacIntel: Reset of the controller (SMC) system management

  Subject of memory NVRAM and PRAM

  -Try to start safe mode

  OS x: what is Safe Boot, Safe Mode?

  -Start to recovery and repair the startup disk

  OS X: on OS X Recovery - Apple Support

  -If it is repairable reinstall the OSX

  How to reinstall OS X on your Mac - Apple Support

  -If you do not have a backup using disk utility to restore the internal drive to an external drive, so that you can try to recover the data.

  Format the boot disk and then do a fresh install of Mac OS x

• Satellite L350 - display turns off during startup

  My screen laptop L350 itself turns off during startup after posting normally for about 2 seconds. It is possible to get the display back to normal if you go to sleep and then wake, but the new screen only stays on for about 2 seconds. This makes it almost impossible running the diagnostics.

  Does anyone have an idea what might happen?

  Hello

  Have you tried an external monitor?

  Perhaps the internal display is affected and needs to be replaced

• What is this screen during startup?

  I bought a Mac Pro to anyone. He had top Cougar. I had these problems and then upgraded to El Capitan and still have them. The back USB ports 'freeze' sometimes. This means that the mouse is connected and you can see that light is thus then it becomes 'power' but won't move the mouse and the keyboard type. So, I have to restart hard. Also when wifi is on and I turn it off the computer freezes as well. And once again I have to hard reboot. During startup, I sometimes get this screen. The loading bar stops at halfway. I posted a picture of OSX 10.11.2; 2 x 3 GHz Quad Core Intel Xeon; 16 GB 800 MHz DDR2 FB - DIMM thanks for any help!

  A check of the machine as you experienced is usually due to a hardware problem.

  Using Apple Hardware Test - Apple Support

  If you don't have the original disc, then you can download it here and make a bootable CD

  https://github.com/upekkha/AppleHardwareTest http://support.Apple.com/kb/ht1427

• Difficulty to get a quick Web work - "missing partition HP_TOOLS" error

  How can I make fast web work, I do the instalation and it gives me an error about a missing partition HP_TOOLS

  Your laptop (HP ENVY 17 - 1191EL) doesn't support all Quickweb. The specifications are available online on here . In case if you supports of Quickweb laptop, the BIOS screen would be an option something like the image below

  

• Hi, what are all the ongoing processes in the operating system during startup itself?

  Hello

  I want to know, what are all the ongoing processes within an operating system during startup/boot.
  Why system processes are always on.
  explain on the windows registry.

  In the order:

  Google each a wisht learn you more.

  Certain system processes are required for the various aspects of the machine - there are a lot of things to allow you to move the mpouse pointer and click on this shortcut and start the process related to it...

  You need to know about the registry of windows at this time - in view of two other queries.  It's just an honest observation.

• 'Search' and 'Run' is missing in the startup folder

  original title: "Search" & "Run" is missing.

  My "Search" & "Run" are missing from my 'Startup' folder, how do I reinstall? I have Windows XP Professional.

  Hi Mike0753,

  The buttons are missing for all users on the computer? If necessary, create a new user account to see if your user account has become somehow corrupt.

  When did you notice the lack of buttons? If it is a recent issue, follow the steps in this document to perform the system restore. This will restore your computer to a previous state.

  Let is know if this helps.

• during startup, I get an error message. Your SQL server installation is either corrupt or has been tampered with (could not open SQLEVN70. RLL) how to solve this problem?

  during startup, I get an error message.  Your SQL server installation is either corrupt or has been tampered with (could not open SQLEVN70. RLL) how to solve this problem?

  Thank you for visiting the Microsoft answers community.

  The question you have posted is associated with MS SQL server and would be better suited to the Group Discussion TechNet Microsoft. Please visit this link to find a community that will provide the support you want.

  Lisa
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How can I get around having to sign into my account (Windows Vista 7) during startup as I forgat my password?

  How can I get around having to sign into my account (Windows Vista 7) during startup as I forgat my password?

  Hello Bob Zientak,.

  If a password is required to log on your system, then you won't be able to cirumvent it. Unfortunately the users of this forum are also not allowed to suggest ways to help you bypass (hack) the password (3668Microsoft Terms and Conditions).

  Remember passwords are case sensitive so maybe that you type a password in the case of bad? Did you create a password recovery disk when you created your password first? If Yes, then you must insert the password recovery disk to allow you to change the current password. If you did not create a password recovery disk then the next and more radical, opion is to re - install Windows.

  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

  John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer: www.winuser.co.uk | vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com

• Windows Vista cannot see this background image instead, I see a solid blue color during startup and shutdown

  original title: background logon of windows vista I do not see this background image instead, I see a solid blue color during startup and shutdown

  I use a laptop with windows vista home basic 32-bit sp2

  After turning on the computer laptop, I get a prompt to enter the password at this point, I would usually get a background image and the same background image appeared when I stopped

  I do not see this background image instead, I see a blue solid color when you start and stop as the background image has been replaced by a blue color

  I followed all the steps of the following

  http://www.howtogeek.com/HOWTO/Windows-Vista/customize-your-Windows-Vista-logon-screen/

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-desktop/can-you-customize-the-logon-screen/75def0ce-2dc4-48c1-B290-daaf685efca4

  http://www.Vistax64.com/tutorials/79886-logon-screen-change.html

  However, I don't see the background image. the background image is in the right folder location whith the required size as jpg image with the exact registry required such as mentioned in the above links entries

  How do I solve this problem

  Hello

  Did you do changes on the computer before the show?

  You can try the steps and check if you are able to see the background on the logon screen.
  a. Click Start, and then type gpedit.msc
  b. navigate to Computer Configuration and go to administrative templates and go to System.
  c. go to connection and set the "bottom always use custom logon" to activate.
  d. create a folder named C:\Windows\System32\oobe\info\backgrounds
  e. put the file you want, and then name it backgroundDefault.jpg
  f. check your other background for the dimensioning of the info files

• During startup, I get an error message that the registry database cannot find a file and modify registry to delete the reference to the file in the registry. How can I do this?

  Original title: Registery Error Message

  During startup, I get an error message that the registry database cannot find a file and modify registry to delete the reference to the file in the registry.  How can I do this?

  Hello

  • What were the changes made before the problem occurred?

  I recommend you perform the clean boot.
   
  Configuration of your system in a clean boot state helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.
   
  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:
   
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135 
   
  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.