Startup Bootcamp to fix repair partition

Similar Questions

• Startup BOOTCAMP partition problems

  Hi, I've seen a few posts that are very similar to mine, but I can't seem to get to the bottom of this issue. Here's the background on what happened:

  I ran El Capitan on a single OS X partition and decided to run Boot Camp Assistant and install Windows 10 on a new partition. It worked perfectly, and I have been using Windows and start back. So, I decided that I would create a new partition for easy sharing files between the 2 BONES using a Fat-32 file system so that the two operating systems can have read/write access. I did it with the disk sideways utility Mac and everything seemed to go smoothly. Also, I don't touch my BOOTCAMP partition, but took all the space for the new partition on the side Mac. Everything seemed fine... until I tried to start again under BOOTCAMP. Now this partition is not recognized as bootable, but it is accessible from the side Mac and everything seems intact.

  I ran the command diskutil list and here is the result:

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 500,3 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_HFS Macintosh HD 361.5 GB disk0s2

  3: disk0s3 Apple_Boot Recovery 650.0 MB HD

  4: Apple_HFS SHARING 22.7 GB disk0s4

  5: Microsoft database BOOTCAMP 115,0 GB disk0s5

  Tylers-MacBook-Pro-3: ~ tylerdouglas$ diskutil info disk0s5

  Identifier of the instrument: disk0s5

  Device node: / dev/disk0s5

  Set: No.

  Part of the whole: disk0

  Device / media name: BOOTCAMP

  Volume name: BOOTCAMP

  Gendarmerie: Yes

  Mount point: / Volumes/BOOTCAMP

  Personality of file system: NTFS

  Type (Bundle): ntfs

  Name (Visible to the user): Windows NT (NTFS) file system

  Partition type: Microsoft Basic Data

  Operating system can be installed: No.

  Media type: generic

  Protocol: SATA

  Smart: checked

  Volume UUID: 1EF1A5FC-BEBE-4528-A0A2-6755D96E1AB0

  Disk / Partition UUID: 0F83EFE3-3E4B-4EAA-8C08-0590F3C60EAA

  Total size: 115,0 GB (114999427072 Bytes) (exactly 224608256 512-Byte-units)

  Amount of free space: 72.5 GB (72523272192 Bytes) (exactly 141647016 512-Byte-units)

  Device block size: 512 bytes

  Allocation block size: 4096 bytes

  Support read-only: No.

  Volume read-only: Yes

  Location of the device: internal

  Removable media: no

  Solid State: Yes

  My theory was that because the BOOTCAMP partition moved from 4 to 5, this confused sort of things. I decided that I loved not more to have the shared partition, so I erased it. Then I tried to delete this partition, but I am unable to do by using normal mode or recovery disk utility. I tried to disassemble and then delete in both modes. I scoured the internet looking for a solution and I am completely stuck. This seems like it should be a super simple solution, but it is frustrating that I can't understand it. I don't think that I've damaged or corrupted something and I just need to be able to start in Bootcamp.

  Help, please!

  Thanks in advance!

  Still have not solved this problem. Any help would be greatly appreciated. Thank you!!!

• Blue screen on startup, the system restore / repair did not work?

  Hi, I get a blue screen on startup and cannot start windows - with the error code x0000007E.

  I followed the steps on http://support.microsoft.com/kb/958233#StartupRepair however runs the repair does not work, and did the system restore.

  Will be saved my files / is there a way to fix this? Thank you!

  Hello

  You can save your files by putting the drive in another computer as a 2nd disk (best) or external
  Drive USB enclosure and then backup to removable media such as CD, DVD or other USB drives.
  Of course a real store of the computer or the manufacturer of your system can help to recover the files.

  Or you can use a boot Ubuntu CD to back up data.

  Use Ubuntu Live CD to backup files from your Windows computer dead
  http://www.howtogeek.com/HOWTO/Windows-Vista/use-Ubuntu-Live-CD-to-backup-files-from-your-dead-Windows-computer

  --------------------------------------------------------------

  Check this thread for more information using BlueScreenView, MyEventViewer and other methods
  to troubleshoot the BlueScreens - top 3 responses (+ 1 other).

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/3deab2fa-4000-4136-8c78-a3d22b1db009

  We can analyze the minidumps if make you it available to the SkyDrive or another file
  sharing sites.

  ZIP or download the content of the C:\Windows\minidump

  Use SkyDrive download collected files and after shot/screenshot.
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  -------------------------------------------------------------------------

  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  (also Windows 7)
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  ===========================================================

  The system has RAID? If so, it's also very suspicious.

  This error is usually a driver problem and display adapter (video) driver is the most suspicious if she
  may be others. Antivirus/antispyware/security programs, equipment (heat) and major software problems
  can also cause the error. When you get to the section of the driver to use the Troubleshoot utility my generic
  methods in the next message and then return to the if necessary troubleshooting tool.

  Have you recently added hardware or drivers updated? Don't forget to look in Control Panel - Windows
  Updates to see if all drivers have been updated it. Other donor opportunities include the antivirus/anti-
  spyware/security programs.

  When you get to the pilot and sections of the memory of the troubleshooter check the following message to
  update drivers and memory test and then return to the troubleshooter if necessary.

  BCCode: 7F 0x0000007E which is also 0x1000007E

  Cause

  SYSTEM_THREAD_EXCEPTION_NOT_HANDLED bug control is a very common bug control. TO
  interpret, you must identify which exception has been generated.

  Common exception codes are:

  • 0xc0000005: STATUS_ACCESS_VIOLATION indicates a memory access violation has occurred.

  For a complete list of exception codes, see the Ntstatus.h file located in theinc directory
  the Microsoft Windows Driver Kit (WDK).

  Solve the problem

  If you do not have to debug this problem, you must use certain basic troubleshooting techniques.

  • Make sure you have enough disk space.
  • If a driver is identified in the bug check message, disable the driver or check with the
  • Reference of the manufacturer for driver updates.
  • Try changing video cards.
  • Check with your hardware vendor for updates to the BIOS.
  • Disable the BIOS memory options such as implementing caching or shading.

  If you plan to debug this problem, you may find it difficult to get a stack trace. Parameter 2
  (the address of the exception) must identify the driver or function that caused the problem.

  If the exception code 0 x 80000003 occurs, a hard-coded breakpoint or assertion was hit, but the system
  has been launched with the /nodebug. switch. This problem should occur infrequently. If it occurs repeatedly,
  Make sure that a kernel debugger is connected and the system is booted with the Switch/DEBUG .

  In case of exception code 0 x 80000002, the trap frame provides additional information.

  If you do not know the specific cause of the exception, consider the following questions:

  • Hardware incompatibility. Make sure all new hardware that is installed is listed in the
  • List of Microsoft Windows Marketplace tested products.
  • Service driver or defective peripheral system. A service driver or defective peripheral system can be
  • responsible for this error. Hardware problems, such as the incompatibilities of the BIOS, memory, conflicts
  • and IRQ conflicts can also generate this error.

  If a driver is listed by name in the bug check message, disable or remove that driver. Disable
  or remove drivers or services that have been recently added. If the error occurs during startup
  sequence and the system partition is formatted with the NTFS file system, you may be able to use safe
  Mode to rename or to delete the faulty driver. If the driver is used as part of the system startup procedure
  in Safe Mode, you must start the computer by using the Recovery Console to access the file.

  If the problem is associated with Win32k.sys, the source of the error may be a third remote
  control program. If this software is installed, you can remove the boot of the computer service
  by using the Recovery Console, and then by removing the offending system service file.

  Check the system log in Event Viewer for additional error messages that might help identify the
  device or the driver that generated the bug check 0x7E.

  You can also disable memory cache BIOS may try to resolve the error. You should also
  Run the diagnostics of material, especially the scanner memory, which provides the manufacturer of the system.
  For more information about these procedures, see the manual of your computer.

  The error that generates this message may occur after the first reboot during Windows Setup, or
  Once the installation is complete. A possible cause of the error is lack of disk space for installation and system
  BIOS incompatibilities. For problems during the installation of Windows that are associated with the absence of disc
  space, reduce the number of files on the disk drive hard target. Find and delete any temporary
  the files that you do not have to have files hidden Internet, backup application and.chkfiles files that
  contain fragments of file saved to disk scans. You can also use another hard drive with more drive
  free space for the installation. You can solve the problems of BIOS by upgrading the version of the system BIOS.

  BCCode: 7F 0x00000007E who is also a 0x1000007E<-- read="" this="">
  * 1141.html? order = votes http://www.faultwire.com/solutions-fatal_error/System-thread-exception-not-HANDLED-0x0000007E-

  ----------------------------------------------------------------------------------------------------------------------

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard event viewer
  Windows. TIP - Options - Advanced filter allows you to see a time rather
  of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during ' blue screen of the.
  death ' crashes and displays information about all accidents of a table.
  Free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by drivers of old or damaged, in particular the video drivers
  However, there are other causes.

  You can do mode if necessary safe or the Vista DVD command prompt or
  Options recovery if your system is installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
  program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Does not work
  tell all possible driver issues).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Partition missing at startup Bootcamp

  I have a Mid 2012 Macbook Pro and I can't seem to be able to start on my Windows partition. I've been running Windows 10 (Windows 7 Pro upgrade) on a 1 TB HARD drive. This problem only comes to happen, after starting to install Bootcamp on another SSD installed in my optical Bay. List of events:

  1. Replace my optical drive with an SSD using an Optibay MSE adapter
  2. Winclone to create an image of my current bootcamp partition
  3. Downloaded an ISO of Windows 10 image on my bootcamp partition
  4. The Boot Camp Assistant, used to create a Setup disk with the drivers on a USB key is empty
  5. Wizard Boot Camp, trying to install Windows 10 on the new SSD
  6. Installation is complete, but on reboot, started to black white screen
  7. Attempt to restart and booted to a black screen with flashing underscore concerns
  8. Initialized to Mac and shaped something was not right, so reformatted the new SSD to FAT
  9. Tried to boot into the old partition Boot camp, only to start on white screen
  10. Disconnected from other SSDS, as suspected, he was causing problems (do not do anything)
  11. Attempt to restore the winclone image of old partition backup
  12. Winclone restoration resulted in creating an EFI disc, as well as what looks like my old drive BOOTCAMP.
  13. Tried to restart in the TRAINING camp from boot disk, which brings me to a black screen with flashing line of underscore.

  This brings me to now. I have the feeling that I messed up the partition table. When you hold the option at boot, I am only offered Macintosh HD, EFI startup and recovery - 10.10. Any idea what I can do to successfully start windows?

  chke wrote:

  Wizard Boot Camp, trying to install Windows 10 on the new SSD

  Installation is complete, but on reboot, started to black white screen

  Windows Setup requires several reboots. Did the restart to complete it successfully? The pilots of the BC did install correctly?

  Installation is complete, but on reboot, started to black white screen

  Attempt to restart and booted to a black screen with flashing underscore concerns

  EFI boot that is used to install on the SSD drive? Your subsequent statement on EFI boot indicates that is the case, but need to confirm.

  Initialized to Mac and shaped something was not right, so reformatted the new SSD to FAT

  Tried to boot into the old partition Boot camp, only to start on white screen

  What is expected. Each disc has it's own independent EFI. BCA is updating the EFI to disk0, pointing to the SSD, which deleted you. It is impossible to boot EFI Windows since the 1 TB HARD drive. BIOS/MBR is a completely different path.

  Disconnected from other SSDS, as suspected, he was causing problems (do not do anything)

  What is still expected. See previous explanation.

  Attempt to restore the winclone image of old partition backup
  Winclone restoration resulted in creating an EFI disc, as well as what looks like my old drive BOOTCAMP.

  Winclone has the ability to restore EFI or MBR. It depends on the model. Your specific model supports both approaches. You can check this by using the Applications-> utilities-> Console and type "Winclone' at the top of the search page to the right area, then check the logs. She restored EFI, which is why you see Boot EFI when using Alt/Opt.

  Tried to restart in the TRAINING camp from boot disk, which brings me to a black screen with flashing line of underscore.

  This because EFI boot is now the problems causing the GPU. Yours is a 13 inch or a MBP 15 - in?

• Re: Missing Partition during startup Bootcamp

  Hello

  could you please please help me, I have the same problem, did the same thing! I have had this results

  < published by host >

  Please start a new thread and post the output of

  sudo dd if = / dev/rdisk0s5 account = 1 2 >/dev/null | hexdump - C

  disk0s4 is the new partition you created and Bootcamp moved to disk0s5.

• Repair of bootcamp after the new partition

  Hello, I'm new to mac and OS X. so I need help please

  I have Macbook 13 OX S 10.11.2 and windows 10. I do a new partition for sharing files between this 2 system, but after that I couldn't enter my windows (windows that display an error asking me to fix or to put the CD or USB)

  I hope I can get help here...

  

  Can you post the output of

  sudo dd if = / dev/rdisk0s5 account = 1 2 >/dev/null | hexdump - C

  This will show us the header of the partition of BC.

• Windows vista home premium displayed "startup initialization failed" recovery/repair could not fix

  Gateway Laptop preloaded vista home premium displayed "startup initialization failed" launched the recovery/repair utility and was not able to repair.  now when you start the computer it will launch recover through process then the screen from windows with dots streaming on bottom is gets.   matter of fact that the screen is still and only way to stop it is to unplug the power.  a recommendations there...?  friends computer so HELP!

  E-mail address is removed from the privacy *.

  Hello

  Go to the website of your computer manufacturer > search your computer specifications > know brand of hard drive > access the Hard Drive manufacturer's Web site > find and download hard drive Diagnostic software and make a record of start of it on the computer that you use to get here, following their instructions > test your hard drive to see if it has failed.

  And see if the hard drive tools help you.

  "7 free disk hard test Programs.

  http://pcsupport.about.com/od/toolsofthetrade/TP/tophddiag.htm

  See you soon.

• bootcamp windows recovery repair

  Hello

  I am running Windows 7 and OS X El Capitan 10.11.4 on the Boot Camp partition. Against my better judgment, I expanded memory for Windows... Must I say more? Yes, I'm a model.  By reading the instructions of the lonely T to others, I was able to restore the ability to see the Windows partition at startup, but all I get is the flashing without windows cursor. I ran the following commands once more by Loner T:

  1 diskutil list

  2. sudo disk/dev /.

  3 sudo had v - r - show/dev /.

  Here is the result:

  Last login: Friday, February 12 05:11:07 on console

  : ~ list of $ diskutil

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * 3.0 to disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_CoreStorage Macintosh HD 1.4 TB disk0s2

  3: disk0s3 Apple_Boot Recovery 650.0 MB HD

  4: Apple_HFS 700.6 Untitled GB disk0s4

  5: Microsoft database BOOTCAMP 113.0 GB disk0s5

  6: Apple_CoreStorage Macintosh 801,4 GB disk0s6 HD

  7: disk0s7 Apple_Boot Boot OS X 134,2 MB

  / dev/disk1 (internal, virtual):

  #: NAME SIZE TYPE IDENTIFIER

  0: Apple_HFS Macintosh HD + 2.2 TB disk1

  Logical volume on disk0s2, disk0s6

  333D00F2-54B7-4666-A816-666ACA578F1D

  Unencrypted

  : ~ list of cs $ diskutil

  CoreStorage groups of logical volumes (1 found)

  |

  + Logical Volume - Group 820AD255-8960-4733-A479-06C0061C5D64

  =========================================================

  Name: Macintosh HD

  Status: online

  Dimensions: 2185844961280 B (2.2 to)

  Free space: 0 (0 B) B

  |

  +-< physical="" volume="">

  |   ----------------------------------------------------

  |   Index: 0

  |   Disc: disk0s2

  |   Status: online

  |   Dimensions: 1384408420352 B (1.4 TB)

  |

  +-< physical="" volume="">

  |   ----------------------------------------------------

  |   Index: 1

  |   Disc: disk0s6

  |   Status: online

  |   Dimensions: 801436540928 B (801.4 GB)

  |

  + -> 9CE7029C-1252-4E3A-91DD-05539BD2CDD8 family of Logical Volume

  ----------------------------------------------------------

  Encryption type: no

  |

  +--> Logical Volume 333D00F2-54B7-4666-A816-666ACA578F1D

  ---------------------------------------------------

  Disc: disk1

  Status: online

  Size (Total): 2185224192000 B (2.2 to)

  Reversible: no

  Name: Macintosh HD

  Volume name: Macintosh HD

  Content indicator: Apple_HFS

  : ~ $ sudo had - vv - r see the/dev/disk0

  Password:

  See the TPG: / dev/disk0: mediasize = 3000592982016; SectorSize = 512; blocks = 5860533168

  See the TPG: / dev/disk0: MBR suspicious to sector 0

  See the TPG: / dev/disk0: Malformed MBR at sector 0

  See the TPG: / dev/disk0: Pri GPT to sector 1

  See the TPG: / dev/disk0: GPT Sec at sector 5860533167

  start index size summary

  0           1         MBR

  1 1 Pri GPT header

  2 32 table GPT Pri

  34 6

  40 409600 1 part TPG - C12A7328-F81F-11D2-BA4B-00A0C93EC93B

  409640 2703922696 2 part TPG - 53746F72-6167-11AA-AA11-00306543ECAC

  2704332336 1269536 3 part TPG - 426F6F74-0000-11AA-AA11-00306543ECAC

  2705601872 1368398512 4 part TPG - 48465300-0000-11AA-AA11-00306543ECAC

  4074000384 262144

  4074262528 220700672 5 part TPG - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7

  4294963200 2040

  4294965240 1565305744 6 part TPG - 53746F72-6167-11AA-AA11-00306543ECAC

  5860270984 262144 7 part TPG - 426F6F74-0000-11AA-AA11-00306543ECAC

  5860533128 7

  5860533135 32 table dry GPT

  5860533167 1 dry GPT header

  : ~ $ sudo disk/dev/disk0

  Disk: geometry / dev/disk0: 97451/255/63 [1565565872 sectors]

  Signature: 0xAA55

  From end

  #: cyl hd s - cyl hd s id [Start - size]

  ------------------------------------------------------------------------

  1: EA 1023 254 63 - 1023 254 63 [1-4294967294]

  02:00 0 0 0-0 0 0 [0-0] unused

  03:00 0 0 0-0 0 0 [0-0] unused

  * 04:07 0 0 0-0 0 0 [0-0] HPFS/QNX / TO THE

  Could someone help me please? I see the BOOTCAMP drive with all data intact on the Mac side. do not know if this is not salvageable... Thanks in advance!

  Can you post the output of

  sudo dd if = / dev/rdisk0s5 account = 1 2 >/dev/null | hexdump - C

  This will show us the first block of your Windows Partition. Out of Yoru Fdisk indicates that the MBR must be rebuilt using Fdisk TPG - https://sourceforge.net/projects/gptfdisk/ .

• Cannot complete startup on Satellite P300 repair

  Hi all

  This is my first post, so please be nice. :)

  I have searched posts and google for ideas but am not coming up with all erases responses pertaining to my question.

  For several weeks now, my laptop was very slow and crashes when you use quite often cause me to have to manually stop the unit by holding the button for 10 seconds.

  This eventually led me to restore my unit at the end of the condition of the box using the recovery partition. In the next few days, I have updated windows, drivers, etc.

  I noticed a very slight improvement in performance, but he "still felt" warm and then frozen again. Manually, I restarted and was given two options:

  Windows Startup Repair (recommended)
  Start windows normally

  I chose the repair option only to receive a message saying that windows could not repair the startup. The details of the diagnosis and repair gave me root causes of:
  A recent driver installation or upgrade may prevent the system from starting.
  Repair action: repair and checking the integrity of system files.
  Result: failed. Error code = 0 x 490
  Time: 529733 ms

  I then went into system recovery options and selected and windows memory diagnostic tool restart now and check for problems.
  Laptop computer has restarted and began testing. Once the test is complete the device tried to restart but hung on a black screen with only the cursor visible.

  Any ideas?

  Thanks in advance for your help.

  Hello

  Looks like the installed Windows operating system is corrupt
  In my eyes, you should try to reinstall new OS.
  If you have important files on the HARD drive, then you could try to start Notepad using a live CD; like Linux, Windows PE (WinPE) or BartPE
  http://www.nu2.nu/pebuilder/

  That would help you get access to the files on the HARD drive that you could save on external USB HDD or USB flash memory.

• BootCamp "preparation-auto-repair" after the triple-boot Linux install.

  Hi everyone and thank you in advance for your help, I'm pretty desperate here...

  I use a retina MacbookPro 13 "with dual-boot OS X el-captain and Win8.1 for years, with also a small third partition"shared file ".

  Today, I needed to install a small partition (ubuntu14), so I decided to take a part of the macOS (26g) of Linux Ubuntu partition.

  Everything went well during the installation process, but now I can only access my OSX. When starting with "command-key" Linux is not appear at all and Win8.1 goes to 'prepare-auto-repair' blue screen without other information.

  I tried to install refit or without success.

  Running diskutil list:

  disk0s2 is my OS X partition

  disk0s3 is my OS X recovery partition

  disk0s4, that's where I think I installed correctly Ubuntu14

  disk0s5 is my shared files Partition (worked between osX and win8.1)

  disk0s6 is my Bootcamp Partition of Win8.1

  

  Running diskutil list of cs:

  

  TPG - vv - r see the/dev/disk0 : running

  

  Running disk/dev/disk0:

  

  Thank you in advance to those who can help me on this.

  All the best,

  Yoln.

  In addition, with regard to this topic: 'not bootable after Ubuntu Installer Bootcamp. "

  I have the exact same blue screen when you try to run Win8.1, but I never see the reclamation / screen, only right boot to OS X, if I don't press any keys.

• PC counters each attempt to fix/repair and finally, the loop to stop/restart windows Explorer.

  So beyond, I'm done with this laptop. He started by run me windows update and the awakening of a BSOD. Now browse those tedious threads, I know that the next thing people want are the dumpfiles. Well, you cannot make them because it won't create dumpfiles. I checked everywhere for them and double-checked to make sure that when I got bsod it is correctly configured to do. It will not create them. So ok, the next thing people say is running scandisk Sfc. Nope, BSOD in the course. Chkdsk? Nope, BSOD. during the. This laptop has a coherent dpc latency problem where every 10-13 seconds it stings really high, distorting the audio. I tried to disable drivers, update drivers, pulling on the battery, and it won't go away. To * with it I say, I can deal with that, besides there is probably a hardware problem, it's an old inspiron 5040. The greatest success in fixing something comes sfc running in safe mode with cmd prompt. He got to 100% and has absolutely nothing more. All this stems from the windows updates failed. But this latest issue is the water drop. Before the windows explore stopped working/restart loop, which prevents me from running damn near all executable on ANY startup mode, I was getting semi-fonctionnalites off safe mode with network. I was inside my damndest to try to solve the problems without paying a penny for the repair (because it's my operating system from windows to the 3rd address I got incredibly frustrated with questions and I'm NOT GOING to sink more money into the purchase/solve this *) but after a month of countless BSOD and failed system restore (BSOD on those too) I decided to say the * with it , it can still be used for browsing with chrome at least, since I found a way to activate the sounds of the internet registry. I had used it for about a month and realized that internet Explorer was causing in fact a kind of conflicts, because all applications requiring an i.e worked incorrectly, display of white windows resources that need to be pulled with knowledge then I tried to reinstall that is and makes the mistake of restarting, forget the automatic Windows Update. Well, I is none of that with this time and tried to turn off the pc before it started with nothing else than a glorified blue screening method. To restart, I got "windows is the restoration of changes", another reboot, then a "Welcome" I get started in the regular office, (not safe mode or anything like that) and he gives me a small white window with "custom settings" on it and literally nothing else. No toolbar, no desktop shortcuts. Wait a few seconds and I get "Windows Explorer has stopped working" and the option to close the window. safemodes boot loop to stop/restart windows Explorer and I can't do anything appear the Task Manager which is pretty useless, because I can't really do anything here except close programs that are not accessible in the first place. Safe mode only I can enter is the one with the command prompt. I don't really know what else to do. Quite happy to take a hammer and break the laptop for parts. There are so many problems with this thing, I doubt that someone will be able to help in any way especially withouth minidumps the BSOD. But if there is something simple that I'm missing for at least the minimum functionality that I was getting out of it until windows update in ruins me, feel free to try to solve the problems. The code the most common bsod I get is 0xf4. I put my money on half of the problem with the hard drive itself and the rest of the question was any other defective hardware. But ill be doomed if I buy another harddrive just to have more questions.

  Hello

  Generally, this problem is caused due to hardware or software related issues. As you mentioned that you have completed the restoration of the system and sets the Explorer loo, I would like to know if the problem is resolved or not.

  Regarding performance related questions, I would suggest trying the following methods and check if it works for you.

  Method 1:

  Try the procedure described in the following Microsoft Help article and check if that helps. This Microsoft Help article consists of the steps to optimize Windows to improve performance.

  http://Windows.Microsoft.com/en-us/Windows/optimize-Windows-better-performance#optimize-Windows-better-performance=Windows-7

  Method 2:

  Put the computer to boot and check if the problem persists. This troubleshooting will help you find what third-party program or the app is the cause of this problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135 
  Note: After the boot minimum troubleshooting step, see the "How to reset the computer to start as usual after a clean boot troubleshooting" section in the link provided to return the computer to a Normal startup mode.

  Please reply with the status of the issue so that we can better help you.

• Satellite A215-S4757 blue screen & startup failure after HARD drive partitioning

  I just bought a Satellite A215-S4757 a week ago & I tried to divide my hard drive coz, I was only one partion (250 GB) using acronis disk director.

  After that I got the blue screen and now I failed to start and I tried all the options to repair my windows or load in SafeMode to no avail coz it crashes just from the window of microsoft corporation.

  I tried to reinstall windows vista with the cd but still does not!
  pls someone helo me :(

  Hello

  Creator of disc of Acronis does not for me but I know for sure that you can split the capacity of the HARD drive into two partitions with rendering recovery DVDs. Start your laptop with recovery DVDs and check the option to install it.

  You must have a mobile US model. I am from Europe and I don't know about you how it works with the recovery media in the United States, but it should be similar to the European and because of that it must be an option to divide the capacity of the HARD disk with two partitions.

  Please try again. It should work somehow.

• no boot device during the start of mini mac and bootcamp after adding the partition

  My mac mini is running el capitan and after I added a partition I don't got no boot device but can start at el capitan after pressing option. However, I can't start boot camp. Thank you!

  Last login: kills Mar 31 17:33:01 on ttys000

  independenceadec1s-Mac-mini: ~ the independenceadec1 list $ diskutil

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 256.1 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Untitled Apple_HFS 1 GB 172.5 disk0s2

  3: disk0s3 Apple_Boot Recovery 650.0 MB HD

  4: Microsoft database BOOTCAMP 82.7 GB disk0s4

  / dev/disk1 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: FDisk_partition_scheme * GB 31.9 disk1

  1: disk1s1 Windows_FAT_32 NO NAME 31.9 GB

  independenceadec1s-Mac-mini: ~ independenceadec1$

  By adding a third partition you have damaged the boot loader. If you use Boot Camp to run Windows, so you cannot add a third partition. To set things straight, you will need to repartition the disk to a single partition and try again. A $20 alternative that might work for troubleshoot you is Paragon CampTune X.

• Bootcamp requiring 50 GB partition?

  Hello

  I have a Macbook Air and I want to run 10 Windows on my mac using Bootcamp. I have an external flash (1 TB) drive that I use for the return to the top of my mac.

  This continues to appear each time I have support to continue.

  How to free up this space? I went about this Mac-> storage and it shows that I have 17 GB free... How can I get rid of this thing? 18 GB is in the bar. Any ideas how I'm supposed to get rid of this? I have an application of great Perspective that I use to see what is take how much space. I have no pictures on my mac; they are all on my external flash drive.

  I've done it before. I ran 10 Windows on my mac before, but I undid the partition. Subsequently, I had all this space is taken and I don't know why. Help?

  What size is your drive? My advice is that you need at least 100 GB for Windows 10 and Windows data. You must remove applications and data to free space.

  OS x: what is 'other' space about this Mac? -Apple Support

• Uninstall and reinstall the Bootcamp files in the partition Windows 10?

  Lonely T had a suggestion regarding a previous post, but I had already looked at the post, he suggests consulting, with no luck.  No further response.  So I try another tack before coming back to Win 7.

  I upgraded partition Win 7 Ultimate to win 10 Pro 10 days and installed drivers 8.1 on Macbook Pro 17 "early 2011."  Apple does not support Windows 10 on these machines, although many noted that they have been able to install it using 8.1 drivers - as I did.  Everything works in win 10 EXCEPT:

  1. by logging into my account, sometimes, the computer crashes because it loads the thumbnail of the bootcamp Control Panel, which gives a BAD_POOL_HEADER BlueScreen, after what win 10 restarts.  It is possible, of course, that the problem lies in fact in the attempt to load another program.  However:

  2. when the loading of the miniature of Bootcamp not breaks down the computer, trying to get access to the control panel often crash to give up - again - the BAD_POOL_HEADER blue, followed by an automatic restart screen.

  All drivers are 'best machine', etc.  Memory - 16 GB - is fine and has no problem under Win 7 or OS X 10.11.3.

  Version of Bootcamp 3.0, which is what has worked with Win 7, although there are newer versions.

  I guess this isn't a common problem.  Any suggestions on what can be done before I abandon Win 10 and return to Win 7?  I am even willing to uninstall Bootcamp in the Win 10 score and try to load it using the automatic installation of 8.1, but not heard about someone who has tried this and had success with it.  (I love 10 and am tired of being told in Win 7 that I should update to Win10.  "But I don't want to waste time with nuisance Bootcamp crashes at 10).

  The Intel GPU drivers seem to cause a lot of grief on Mac before 2012, when executing W10.

  1. can you check if the Windows installation is EFI (use msinfo32 and look at the Mode of BIOS).

  2 W7 is usually installed using old BIOS/MBR on Mac 2011. The hardware exposed through the layer of CSM-BIOS is not the same as that exposed through EFI. For example, the layer CSM cache the Intel GPU integrated. You can check what cards you currently have in the Device Manager? Please also check devices hidden using view-> the box show hidden devices.

  3 W7/W8.1 drivers are not different from the BC driver packages 5.x series.

  4 W10 has a more rigorous application of the drivers and does not load the unsigned drivers that have been allowed in W7/W8.1 5.x series.

  5. the W8.1/W10 BC6 drivers series is necessary.

  6. you need not install drivers BC6 and he just use generic Windows drivers, but some of your specific Apple hardware does not work the same OS X and W10 using this approach.

  7. most of the users have installed individual pilots as a solution, in some cases using administrator rights and compatibility mode.

  8 event Viewer would be the best place to search for the driver that caused the exception.

  9 automatic update of Windows seems to be broken in W10. It installs drivers that are appropriate for your hardware, but these accidents cause drivers, reboot, BSOD, etc..