Partitioning HD iMac - confirm the strategy, please

Similar Questions

• Does anyone know why my iMac G5 osx10.5.8 suddenly developed continuous small networks of lines on the screen please? I can provide screenshots.

  Does anyone know why my iMac G5 osx10.5.8 suddenly developed continuous small networks of lines on the screen please?

  I tried to provide screenshots - insert an image does not accept.

  

  

  Just happened while the iMac was asleep.

  Thanks in advance

  Tony

  The image seems to reflect the possibility of problems of graphics processor.

  Some models had a history of failure or bad solder connections. others may

  have a combination of capacitors & other materials; Finally we have to fix.

  https://DuckDuckGo.com/?q=imac + 24 - anomalies graphics + 2008 + in +& t = ffsb

  One of the remedies for a graphics card problem, is a re - weld made by the

  users who have taken their card from the computer & their cooked in the kitchen oven.

  This idea has worked for some; You may be able to contact an authorized Apple

  Service provider or see if any of the parts suppliers in line can answer questions

  availability of replacement given to nine graphics cards, if you were

  can be removed from the logic board or if it is affixed, or welded to the card.

  An iFixit.com repair guide for your series of iMac (Intel-processor 2008) 24 inches

  can show that if that article can be virtually eliminated, if if will show process.

  https://www.iFixit.com/device/iMac_Intel_24%22

  The details of the computer in the bottom of your post isn't an iMac G5 model, and

  There is no powerPC G5 processor equipped Macs after late vintage

  2005 to early 2006; If the computer in the discussion is a G5 is not 24 inches

  and would be a model of Intel. They use a different architecture than G5

  powerPC even though in some respects are similar at least in the General design.

  This contains all guide ifixit for iMac G5 Power repair (there is no 24-inch model)

  https://www.iFixit.com/device/iMac_G5

  If you have an iMac with Intel processor and an older iMac PowerPC G5, specify.

  Don't know if a reset of the SMC or likely to alter the symptoms or change NVRAM

  the Visual problem on the screen; an underlying hardware problem is a likely cause.

  • Reset the management system (SCM) controller on your Mac - Apple Support

  • How to reset the NVRAM on your Mac - Apple Support

  If this is your model iMac (24 inch Early 2008) follows the model of generation identifier:

  Introduced April 2008

  Abandoned March 2009

  IMac8, 1 model identifier

  Model number A1225

  EMC 2211

  MB325LL/A order number

  First Prize $1 799 (2.8 GHz) $2 199 (3.06 GHz)

  You may be able to find the numbers of reference and research for replacement new or repaired

  old stock graphics cards. A friend had one of these models of iMac 24 inch 2008 and

  It failed due to a graphic processor; where she lived the BestBuy did not fix

  She even if it has been purchased by them with their extended warranty; No applecare.

  So, there are some out there in almost perfect condition, but not fixed, always.

  Do not know if the charges involved would be the value relative to the other

  later construction that can have no history of similar design construction. {Confirm the identity of the iMac.}

  Sorry I don't have any new ideas regarding this problem.

• I was told that Premiere Pro is not compatible with Windows 10. Is this true and if so, I need to stop my subscription NOW. If I think it's the shit please keep my subscription but please send me an email of confirmation that it is compatible with windows

  I was told that Premiere Pro is not compatible with Windows 10. Is this true and if so, I need to stop my subscription NOW. If I think it's the shit please keep my subscription but please send me an email of confirmation that it is compatible with windows 10. I had a hard time with some people emptying my pockets trying to sell me different windows on different hard drives in the same computer, which until now has completely messed up my (both high-end) computer.

  Please help me as much as you can, but especially with programs that were in the windows all the time until recently Windows 10.

  A craving for believer,

  JOe @.

  Re: Windows 10, Here I Come

• I would like to confirm the membership, but he said "there was a problem processing your order, please contact our Service team customer care for assistance." [a : ??]

  I would like to confirm the membership, but he said "there was a problem processing your order, please contact our Service team customer care for assistance." "Middle East & North AfricaBahrain: 80081097Egypt: 08000000447Jordan/Kuwait/Lebanon/Qatar/Yemen: English + 44 207 365 0735Jordan/Kuwait/Lebanon/Qatar/Yemen: Arabic/French + 44 203 564 4145Oman: 80077173Saudi Arabia: 8008446638Tunisia, the Morocco and the Algeria: + 33 United Arab Emirates 157324642United: 80004443085Commonthwealth of independent States (CIS): + 44 207 365 0735"

  If your account does not display your scheduled subscription and you have a working day of pst pending, please contact adobe support.

  Adobe ID code

• "Impossible recovery disk for this computer. Confirm the type of model.

  Dear everybody

  I have a prolem on my computer, and my computer is a Sony Vaio VGN-CS230J. My computer operating system is Windows Vista Home Premium 64-bit. Now I use Windows 7 and I want to back to the original operating system recovery, but it does not work. When I want to recover, it displays a message 'can't the recovery for this computer disk. Confirm the type of model. I wish that everyone could help me.

  To return to Vista, you must do a clean install, which probably a format the hard disk during the process (at least I'd do a format just to be sure to do it again and not accidentally install two OS on the same system that would create a more serious problem).  Make sure that you backup that data that the process will erase your drive first clean everything.  If you use a recovery disk or a recovery partition provided by the manufacturer, you must contact the manufacturer for advice on how to complete the process, because the recovery process is their to and not Microsoft.  This is the computer we're talking about:http://esupport.sony.com/US/perl/model-home.pl?mdl=VGN-CS230J®ion_id=1?  We can not help you with the process of recovery beyond what I've included below (which is basicially links to the Sony site and ways to contact them or obtain additional information).

  If you use the recovery Partition and it does not work, then you might need instead of disk recovery (that you can get from the manufacturer, for a small fee or maybe even do partition recovery - well than if the partition does not work I would ask on the disks, it - see the following) (: http://www.kb.sony.com/selfservice/microsites/search.do?cmd=displayKC&docType=kc&externalId=C427414&sliceId=1&docTypeID=DT_KNOWLEDGEARTICLES_1_1&dialogID=143790279&stateId=0).  Here are the steps to perform the recovery discs recovery according to Sony: http://www.kb.sony.com/selfservice/microsites/search.do?cmd=displayKC&docType=kc&externalId=C1003796&sliceId=1&docTypeID=DT_KNOWLEDGEARTICLES_1_1&dialogID=143790279&stateId=0 , but even once, we cannot help you with this.  The error you get suggests the recovery information does not match the model of the computer - which may mean there was an error during production (with the computer or with the recovery software) - but I don't know who to hit and you really do need to talk to Sony about this.  http://esupport.sony.com/US/perl/support-contacts.pl?mdltype_id=24.  If we consider the costs if this system is no longer under warranty, I think I'll try the chat option - although not as effective or as fast as the phone, he can usually answer most questions and help with most of the problems (and tell you how to do the things you need to do and how to get the things you need to get - if anything).  You know the problem and you know the situation and you know what you need to understand, therefore, to ask the right questions and get the answers you need.  If the chat also costs, you could try e-mail even if it will take more time and you'll have to write one that asks everything you want to know the first time or you will go back for days.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I really need help! Partition WENT Bootcamp! Solitaire T Please Help!

  Hello. I have been using Windows 7 with Bootcamp on my Macbook Pro Late 2013 15 inch 16 GB 2.6 GHz Core i7 Retina since I bought the new PC. I turned on my mac, the other day, and from nowhere, the Windows Partition was gone. The only thing I did differently was that I turned on FileVault and encrypted system. I wonder if it has affected my score because of it? I'm not sure. I'm so nervous, because I have all my files working really important on the partition and I was not able to access it at all.

  Everything I tried to do so far:

  I tried plugging my MBP on my iMac and starting in the target mode disc and I found all the files in the Windows partition. For some strange reason, the bootcamp partition is grayed out in disk utilities and it is now called "disk0s4."

  I have a disc of Windows 7 I was able to boot from and he was about to install Windows, but I was afraid that he would crush everything so I cancelled it.

  When I starts my alt now and hold MBP, as I used to always have to do to get into Windows, it shows 2 "Macintosh HDs' while it will display a"Macintosh HD"a"recovery disc"and a"Windows"in the car. (I guess that by encrypting the drive, he may have messed up the designation of the vouma... Not sure)

  I've disabled FileVault, unlocked and decrypted the system to see if it would help, but no luck.

  I tried to hit check disk and then repair disk and nothing has worked.

  I also tried hitting the fixing drive and that did nothing.

  Is there a way I can access the files on the partition, if there is no possible way to reinstall windows 7 without any crush?

  Thank you in advance to anyone who helps answer this question. I'm so stuck!

  I have read forums and I saw what"Loner" asked someone to type these commands in a terminal:

  diskutil list

  Cs diskutil list

  sudo TPG - vv - r see the/dev/disk0

  sudo fdisk/dev/disk0

  Check my terminal results below: I've also attached the text file of the Terminal Server session.

  Last login: Friday, may 6 06:40:05 on ttys000

  Bennys-MacBook-Pro: ~ the djrelentt list $ diskutil

  / dev/disk0

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * 1.0 TB disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_HFS Macintosh HD 623,4 GB disk0s2

  3: disk0s3 Apple_Boot Recovery 650.0 MB HD

  4: Microsoft data base 202,0 GB disk0s4

  Bennys-MacBook-Pro: ~ list of cs djrelentt$ diskutil

  No logical volume group CoreStorage found

  Bennys-MacBook-Pro: ~ djrelentt$

  Bennys-MacBook-Pro: ~ djrelentt$ sudo TPG - vv - r show/dev/disk0

  See the TPG: / dev/disk0: mediasize = 1000555581440; SectorSize = 512; blocks = 1954210120

  See the TPG: / dev/disk0: MBR suspicious to sector 0

  See the TPG: / dev/disk0: Pri GPT to sector 1

  See the TPG: / dev/disk0: GPT Sec at sector 1954210119

  start index size summary

  0           1         MBR

  1 1 Pri GPT header

  2 32 table GPT Pri

  34 6

  40 409600 1 part TPG - C12A7328-F81F-11D2-BA4B-00A0C93EC93B

  409640 1217596352 2 part TPG - 48465300-0000-11AA-AA11-00306543ECAC

  1218005992 1269536 3 part TPG - 426F6F74-0000-11AA-AA11-00306543ECAC

  1219275528 340403448

  1559678976 394530816 4 part TPG - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7

  295 1954209792

  1954210087 32 table dry GPT

  1954210119 1 dry GPT header

  Bennys-MacBook-Pro: ~ djrelentt$ sudo fdisk/dev/disk0

  Disk: geometry / dev/disk0: 121643/255/63 [1954210120 sectors]

  Signature: 0xAA55

  From end

  #: cyl hd s - cyl hd s id [Start - size]

  ------------------------------------------------------------------------

  1: EA 1023 254 63 - 1023 254 63 [1-409639] < unknown ID >

  2: AF 1023 254 63 - 1023 254 63 [409640-1217596352] HFS +.

  3: AB 1023 254 63 - 1023 254 63 Boot Darwin [1218005992-1269536]

  4: 0C 1023 254 63 - 1023 254 63 FAT32L Win95 [1559678976-394530816]

  Bennys-MacBook-Pro: ~ djrelentt$

  The large gap between GPT3 and GPT4 usually indicates a lost NTFS header. Can you use El Capitan has deleted my windows bootcamp partition as a reference (there Testdisk screens) and run Testdisk analysis and launch a quick search?

• iMac causes the connection to Time Capsule Internet to lock up

  Whenever my iMac wakes up and connects to my Time Capsule via a Wi - fi, internet connection the TC freezes immediately for all connected devices, including the iMac.  I first noticed the issue on the iMac where internet was not accessible through any application on the system.  Then I went to my MacBook Pro, I found the same problem from happening.  Even on my iPhone and iPad.  I assumed it was an ISP issue and abandoned.

  A few hours later, I went back to my MBP and found the internet connection has been re-established and working properly.  I then went back and woke to my iMac and open Safari.  The field of the internet to a halt.  Back on my MBP connection was suspended again.  Now I think that my iMac was the problem, I turned off wifi on the iMac, and the page that I tried to load it on my MBP immediately came.

  Then I tried don't start the iMac in Mode safe mode to see if I could eliminate the problem... no chance.  Even in safe mode, when it is connected to on the wifi time capsule, the internet connection for the entire House grinds to stop.

  So, to summarize, when my iMac is awake and connected to my Time Capsule via wifi, internet connection for all devices connected to this wifi network hangs up completely.  The moment I turn off wifi on the iMac, the internet connection is restored immediately at full speed for all other devices on the network.

  I'm at a total loss about what to do next... any ideas?

  Please start the iMac in recovery mode. To connect to the network. The same thing happens?

• Best free tool for rezising of partition which should support the client as a server operating system.

  Does anyone know about a free tool for other than DiskPart Disk Partition resizing? It should support the clients and servers OS.

  Hello JawadQazi,

  There are many free tools for the Partition of drive on the internet. Please search an internet. Some tools have free trials and others have a load for the tool. You will need to do research on who will provide a tool best suited to your needs.

  Thank you

  Marilyn

• How to fix the error that appears when confirming the purchase for xbox live gold 1 month free membership

  I recently bought my xbox 360 and when I've been setting up I chose the option to wait to use the offer for free gold membership. Now, I found where I can access it again, but when I confirm the purchase, he said: "unable to retrieve data from xbox live. Please try again later. error code 80070057. I tried frequently for about 2-3 days and it is always popping up. Please give me this info, if any help is available. Thank you

  Hello

  The question you have posted is related to the Xbox and would be better suited to the Xbox community. Please visit the below mentioned link to find a community that will provide the support you demand:

  http://support.Xbox.com/en-us/

• I have the Hello, I have a Windows Vista Business OP, 32-Bit - I'm not able to use my CD/DVD player - "the message,"Please insert the disk"as much as I insert a disc."

  What do you think could beb solution?

  I tried a solution by Microsoft, but I could not find filter lower or higher in the right pane - so I had to give up.

  See below;

  Windows Vista

  1. click on Start

  Collapse this includes this im

  

  and then click all programs.

  2. click on Accessoriesand then click run.

  3. type regeditand then click OK.

  Collapse this includes this image

  

  If you are prompted for an administrator password or a confirmation, type the password, or click allow.

  4. in the navigation pane, find and then click the following registry subkey:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  5. in the right pane, click UpperFilters.

  Note You can also see an UpperFilters.bak registry entry. You don't have to delete this entry. Click UpperFilters . If you do not see the UpperFilters registry entry, you may still have to delete the LowerFilters registry entry. To do this, go to step 8.

  6. in the Edit menu, click delete.

  7. When you are prompted to confirm the deletion, click Yes.

  8. in the right pane, click LowerFilters.

  Note If you do not see the LowerFilters registry entry, unfortunately this content can't help you. Go to the section "next steps" to learn how you can find more solutions or more help on the Microsoft Web site.

  9. in the Edit menu, click delete.

  10. When you are prompted to confirm the deletion, click Yes.

  11. exit the registry editor.

  12 restart the computer.

  Delroy

  Hello

  There are several methods to check the high low filters and maybe it's not yet the real
  the cause of the problem.

  -------------------------------------------------------------------------------------------------------------------

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• When installing a new operating system isn't automatically wipe the hard disk, create a new partition, and then install the operating system?

  Have a Dell system, caught a virus and it has really messed up the PC. Recently, it got worse so I tried to reinstall the operating system with the Dell disks. It wouldn't work. So I bought for Windows 7 Professional, it will not be installed. My first question when installing a new operating system isn't automatically wipe the hard disk, create a new partition, and then install the operating system? Because this does the same as the Dell disks, is to take what is on the hard drive and put it in a folder called windows old, is not formatting the HD. When I boot the disk, it shows the installation of files then open windows and start the installation. Before he could finish I get an error missing or corrupted files. Tried several times now, windows will still not open. Any suggestions? Once while trying to install the pc crashed with a blue screen which is one of the reasons why I have reinstall the OS, he started to plant a few times. I don't remember all the details on my PC, but its 4 years, triple core coprocessors, ram 8 GB, 500 GB HD. At the same time just after all this started in Jan. I had also improved my 3 GB to 8 GB memory. I bought the Dell memory for my system. Since the crash, could there be a problem with these new memory chips? Last night I tried to disassemble each and reinstalling it, but that doesn't seem to make a difference. Before I tried to reinstall the operating system, the pc was see the concert 8.

  Original title: used to install Windows 7

  Disconnect any other (additional) internal hard drives and external USB devices.
  Look for any loose hard drive power or cables SATA, graphics card or other power cables.

  First run Memtest86 +:
  It runs from a floppy disk or CD and should eliminate or confirm if one or more of your memory
  sticks are bad or the values of the SPD in the BIOS are correct.
  Let it run for as long as you can: 2,4,6,8 or several hours (at least 3 full passes), so no errors at that time then your ram is OK.
  http://www.memtest.org/
  Memtest86 + Guide/How To (use the.) ISO to create a bootable CD)
  http://www.overclockers.com/forums/showthread.php?t=409152

  Hard drive test:
  If you do not know your readers of the brand and model, try "Speccy",.
  It provides information from the computer/system in detail:
  OS, CPU, RAM, motherboard, graphics, Hard Drive, optical, Audio, peripherals, network.
  Note: Option RAM indicates number of slots, DRAM Timing.
  Works your memory speed (frequency). The nominal frequency of your memory.
  http://www.Piriform.com/Speccy

  Test your player - create a Bootable CD:
  Ranging from 5 to 25% (depending on the make and model) new hard disks are defective.
  Note: Reliability of the drive hard has come the way down over the last 24 months and improved a bit lately according to manufacturing.

  Test your drive with the car manufacture utility.
  If you have a new hard drive Seagate the very next thing would be to download Seagate Seatools
  (bootable CD) and check bad sectors.
  SeaTools for information: http://www.seagate.com/support/downloads/seatools/
  SeaTools for Windows download: http://www.seagate.com/support/internal-hard-drives/enterprise-hard-drives/saturn/seatools-win-master/
  SeaTools for DOS download:
  http://www.Seagate.com/support/internal-hard-drives/consumer-electronics/LD25-series/SeaTools-DOS-master/

  For Western Digital readers to download the .iso from WdDiag file: http://support.wdc.com/product/download.asp?groupid=611&sid=30&lang=en

  Samsung Estool: http://www.samsung.com/global/business/hdd/support/utilities/ES_Tool.html
  Samsung Disk Manager software: http://www.samsung.com/Products/HardDiskDrive/utilities/shdiag.htm

  Hitachi Drive Fitness Test Software: http://www.hgst.com/hdd/support/download.htm#DFT
  Diagnostic tool available for use by customers who believe that having a brand Toshiba Fujitsu hard drive:
  http://SDD.Toshiba.com/main.aspx?path=ServicesandSupport/WarrantySupport/SoftwareUtilities

  Notice of Fujitsu drive management utility: http://www.fujitsu.com/us/services/computing/storage/hdd/

  Toshiba CD bootable: (BACK Diagnostic Tool version 7.0 for IDE/ATA/SATA hard disks)
  http://SDD.Toshiba.com/main.aspx?path=ServicesSupport/FujitsuDrivesUSandCanada/SoftwareUtilities#diagnostic

  Also check Home Edition free Partition Wizard option "Test of disc surface":
  http://www.partitionwizard.com/free-partition-manager.html

  J W Stuart: http://www.pagestart.com

• Get the message: "Please download Adobe Reader DC for Mac or Windows" when I try to open a fillable pdf on my ipad.

  Get the message: "Please download Adobe Reader DC for Mac or Windows" when I try to open a fillable pdf on my ipad. But when I'm looking for the DC version in the app store there is no one, please help?

  Hi fabler80957302

  Please confirm if you get the error message below

  If so, it is a special type of PDF form with Adobe LiveCycle Designer. And mobile applications of Acrobat Reader do not support these forms.

  I suggest for you please download the PDF document on your Windows or Mac desktop and open the same with the Acrobat reader DC desktop version.

  Also please let us know if this is a different issue than that.

  Kind regards

  Supriya

• Exporting the problem: Please HELP

  Whenever I go to export my file it just happens

  and it wont let me queue or press ok to confirm the export as can someone help me please?

  Thank you

  

  Hello thank you for the comments, I had auto-hide the taskbar at the bottom I thank you for your help

• I am currently using Lightroom 4. I bought the IMac with the largest memory, but he has quickly filled. To conserve space on my computer, I bought a hard drive and I tried to get my lightroom back up there. (I don't know if I did it correctly or not

  I am currently using Lightroom 4. I bought the IMac with the largest memory, but he has quickly filled. To conserve space on my computer, I bought a hard drive and I tried to get my lightroom back up there. (I don't know if I did it correctly or not) Now, all my photos in Lightroom are "offline or missing", and I have no idea what to do next. Any help would be greatly appreciated.

  I guess you mean not memory and disk space, you want to clear space on the internal drive. Is this correct?

  If you have moved your photos somehow (this is not a backup), please follow these instructions to reconnect photos in Lightroom. Adobe Lightroom - find folders and files moved or missing

  In addition, you must (it is obligatory) make real backups of your database catalog and photos, that means accurate identical copies, made by a method automated and placed on a different physical disk than the originals. Lightroom allows you to make backups of your files of catalog on a regular basis, it is an option under the catalog settings. To make backups of your photos, you need some third party software to do.

• I just downloaded Creative Suite 6 on my new MacBook and not only the interface seems a bit different but I noticed that the oil paint filter is not available.  I used the same discs on my office iMac and the filter still works there.

  I just downloaded Creative Suite 6 on my new MacBook and not only the interface seems a bit different but I noticed that the oil paint filter is not available.  I used the same discs on my office iMac and the filter still works there.  I use it often and would appreciate any help to recover!

  Please download and install Photoshop CS6 from the following link: download Creative Suite 6 applications