partitioning or not?

Similar Questions

• Published: Recovery Partition do not have day

  I posted this under Yosemite, instead of El Capitan - very sorry.

  I ran updates on iMac 10.11.6 10.11.5

  The update has not changed the recovery partition, it is still at 10.11.5

  Ran 10.11.6 combination update, still do not update to recovery partition.

  What should I do to get my recovery partition in harmony with my primary OS version?

  Thank you!

  What makes you think that your recovery partition is not up-to-date?

• Bootcamp partition is not as boot drive, after running bootcamp to install Windows 10 on MacbookPro 15 "El Capitan running

  Hello

  I'm trying to install 10 Windows on my Macbook Pro. I followed this guide, but I am stuck between steps 3 and 4. In disk utility, I see that the bootcamp partition is created, but it does not appear as boot drive. I also tried to start my mac while pressing the option key, but still it will not show.

  See below for a screenshot that shows the current state of my machine.

  

  

  

  How can I continue to install 10 Windows on my Mac?

  Your BOOTCAMP partition internal not yet have Windows installed on it.  If you're between steps 3 and 4 (the installation procedure standard), your, assistant Boot Camp should automatically rebooting your computer after partitioning, from the installation media (Windows 10 CD), you must have created.  I assume that you already have a Windows 10 installation disk.  Make sure that the disc is inserted when you first enter assistant Boot Camp and you let the computer restart on its own.

  Apple instructions are a bit vague (somehow I'm not surprised).

  Watch (time code 04:26 - 09:15) in next video for instructions (https://www.youtube.com/watch?v=1SxA_OsPEgk).

  Good luck.

• External HD fat32 partition is not mounted

  I've updated to Yosemite to El Capitan 10.11.2. My external hard drive has 2 partitions, 1 used for Time Machine, the other partition formatted in Fat32.

  Everything works fine so far.

  I had to make some adjustments in SIP (csrutil toggle) to get my wifi working. All ok again.

  After a few days without problems, I have updated to 10.11.3. The partition of Time Machine is fine, but the Fat32 partition rises no more.

  In Bootcamp Windows, the fat32 partition is mounted works ok.

  On another external hard drive, I still have El Capitan 10.11.2, when I boot this disk partition Fat32 works well again. I drive repair, etc.

  When I start again from El Capitan 10.11.3 the Fat32 partition is not recognized, is not accessible. USB drives in Fat32 are not too recognized.

  SIP clear has no help.

  All this seems to be related to the SIP, kext of unsigned drivers.

  Adjusted recovery csrutil Terminal, mode, enabled - no kext

  Now everything works fine, including my wifi dongle.

  I'll try to find the updated drivers for my WD drive.

• HP530: recovery partition has not installed

  Reinstalled the operating system, destructive, with SE recovery disks. The recovery partition has not been installed. Any comment as to the reason would be appreciated. Thank you.

  Hello

  No, your brand auto recovery pricing won't recreate the recovery partition. If you want to re-create the recovery partition, you need a set of HP to perform the factory restore.

  Self made pricing factory restore will only effect C: partition

  Kind regards.

• My Windows 8 partition does not appear

  Hello

  I have a problem with my macbook pro (early 2011) which I hope someone can help me with.  I tried researching the issue on mine and have not found anything that fits my specific situation.  I consider myself a little above the average user and do not have any formal education in computers.

  I had partitioned macbook brother previously with windows 7 and had no real problems.  I had looked at the walkthroughs on youtube and forums.  It was a year ago.  Last week I decided I want to partition my macbook so that I could use windows.  My boyfriend already has a version of windows 8 (64-bit) that had not been used, so I assumed that it would be nice to use it.  I carelessly did not saved my computer.  I used the boot camp assistant who has two boxes to check with the download of the last support Windows of Apple options and install Windows 7 or later.  I did both, which prompted me to plug in a USB key, I did.  When he was done download Windows support, it prompted me to install the cd that I used for the installation, I did, the 64-bit windows 8.  Then it prompted me to choose how I wish the windows partition.  I chose the option to divide it into equal parts, if I remember correctly out to be about 159 GB for storage remaining on my mac and about 159 GB passes to the new partition of windows.  At some point the computer restarted and I had the option to accept the terms and agreements for Windows and I did, and then he invited me for a product key, I got in.  I had options for disk 0, 1, 2, etc. and the correlation of numbers for partitions.  When I'd done it before if I remember correctly, one of the options should have considered something like "disk 1 Partition 3: BOOTCAMP" and I think that I would have a few steps after this formatting including it.  But the bootcamp partition has not showing as an option.  I decided to restart my Mac and remove the partition and start again when I had someone to help me.

  The problem is that I can't delete the partition because its does not appear anywhere on my mac, I can see.  I tried to use boot camp again to remove it, but he gave me the same guests as if I had just started.  I also tried to go to disk utility and it does not appear there either.  I also noticed that the approximate amount of GB I assigned to the windows partition always took to the top of this memory.  Instead of having the original number of GB of free space on my mac, it says now I 159,84 Go 85,87 Go free.  When I tried Windows partition using boot camp just to see what he would say, the corresponding figures having only 85,87 GB to divide between mac and windows.  After looking to the top of the information on my mac, the only thing I've noticed showing how much storage I had initially is entering the system report and selecting storage and see what is called the logical volume group which has 319,21 GB of which 159.02 is free, which is the number of the partition that I did.  But I have no idea if it is still relevant or even isn't a logical volume group.  I should have saved my computer and should have looked more into it before plunging blindly, but now that I have, I was hoping if anyone had any idea of what could have happened or what I could have done wrong.  The only solution I've come across is my current computer backup and reformatting of my mac.  I would try to avoid this if its possible but will if I have to.

  I apologize for the wordy explanation.  I used OS X El Capitan when I made the partition, and I updated after I made the partition hoping it might help somehow, but there is no change.  If more information is needed or if images are necessary, I would be happy to do so.  Thanks for your time.

  Other information:

  OS X El Capitan 10.11.3 version

  MBP 13, in early 2011

  Intel Core i5 to 2.3 GHz processor

  4 GB 1333 MHz DDR3 memory

  Graphics Intel HD Graphics 3000 384

  Wizard Boot Camp, Version 6.0.1 (522)

  Can you post the output of the following commands in OS X Terminal?

  diskutil list

  Cs diskutil list

  sudo TPG - vv - r see the/dev/disk0

  sudo fdisk/dev/disk0

  The "sudo" commands will prompt to enter your password, and there do not appear to come back. You can also see caution against improper use 'sudo' and the potential loss of data due to an "abuse" of the order.

• Resize partition, bootcamp partition read not

  Can someone help me move my bootcamp partition? I resized my drive and read several pages of people fixing the missing disk, but I keep running into walls and need someone to hold my hand.

  I downloaded gdisk and tried a command line that I found here http://nerdr.com/bootcamp-partition-lost-repairing-mac-partitions/ but after trying to add my Windows on the MBR partition, the exit has claimed "the partition does not exist or it is too big.

  diskutil list

  

  Cs diskutil list

  

  sudo TPG - vv - r see the/dev/disk0

  

  sudo fdisk/dev/disk0

  

  sudo TPG - vv - r see the/dev/disk1

  

  sudo fdisk/dev/disk1

  

  1. What is the purpose of 'Untitled' - disk1s4? Readers of merger require a lot more work to manage, in general.

  2 Please after the release of

  sudo dd if = / dev/rdisk1s5 account = 1 2 >/dev/null | hexdump - C

  3. stop to read the nerder.com. It's a recipe for disaster and data loss.

  4. Google search can be your best friend, but it can also be your worst enemy.

• HP Pavilion g6-1278sa recovery partition does not

  Recovery partition does not work after the creation of new partitions. Where can I get the restore CD?

  Hello

  You can order a set of replacement recovery disks using the link below.

  http://support.HP.com/us-en/document/c00810334

  If you have a problem with this link, order them directly from HP.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  Kind regards

  DP - K

• With EFI partitions will not rise

  HP z400: after a repair/upgrade to sp1 of Windows 7 Pro (64), no matter what external disk with an EFI partition is not installed.  Player will be present in the BIOS and the management of drive, but without a letter. Cannot assign a drive letter.  All other discs mount correctly.  Disks with EFI partition will mount on other PCs.  All the drivers seem to be current and fuctional.

  Hello

  I never got a message error... all options have been grayed out.  And I tried the guest... but it has not yet been recognized in disk management.

  But after two weeks of puzzle, I finally found the cause.  I run MacDrive 8 so I can play discs with HFS + formatting.  This program should be completely uninstalled and reinstalled after the upgrade.  I had turned it off before the upgrade, but it takes more than that.  Everything works now as expected.

  But it would be really nice if Windows reads HFS disks...

  Thank you

  Scott

• 'Operating system not found', can't the recovery partition, do not have a recovery disk

  Original title: recovery Partition not here and not backed up copy of Win8

  I have an 18 month, Acer Aspire V5-571pg now out of warranty.  For the last 3 days, of what it has been in a loop bringing repair until this morning disc error messages, it just says "operating system not found '.  A call to Acer support and we have tried to activate the recovery Partition using Alt - F10 but it seems that the partition is not there either, and of course I did not create a recovery disk when I got the laptop.  I was not eager to send the Acer laptop for service after the warranty expires, I thought I should at least attempt of recovery or re - install.  Windows 8 is a preinstalled OEM version.  Where should I start?  Y at - he's going to be a download that I can use and what I need to know a product key to install?  Should I get Acer to send me a recovery disk?  Not super PC here but am knowledge letter wins all the time.  I hope someone understands my situation.  Thank you

  You can order the recovery media using your SNID, from the link below. I have an ACER desktop computer, and it cost me less than US$ 20.00, to order an additional series.

  eRecovery Media

  http://store.Acer.com/store/aceramer/en_US/eRecovery

• FDPSTP failed due to the ORA-02149: specified partition does not exist

  EBS R12.1.3
  Database 11.2.0.2
  Error message
  

  **Starts**23-JUL-2012 16:49:21
  ORACLE error 2149 in FDPSTP
  
  Cause: FDPSTP failed due to ORA-02149: Specified partition does not exist
  ORA-06512: at "SYSTEM.AD_DDL", line 165
  ORA-06512: at "APPS.MSC_MANAGE_PLAN_PARTITIONS", line 371
  ORA-14074: partition bound must collate higher than th
  +---------------------------------------------------------------------------+
  Start of log messages from FND_FILE
  +---------------------------------------------------------------------------+
  j := 1
  table := MSC_ATP_SUMMARY_SO
  partition_name : ATP_SUMMARY_SO__1
  l_count := 1
  Partition for instance 1 already exists
  table := MSC_ATP_SUMMARY_SD
  partition_name : ATP_SUMMARY_SD__1
  l_count := 1
  Partition for instance 1 already exists
  l_share_partition := N
  plan count := 0
  After Create Partitions
  +---------------------------------------------------------------------------+
  End of log messages from FND_FILE
  +---------------------------------------------------------------------------+

  901629 wrote:
  EBS R12.1.3
  Database 11.2.0.2
  Error message

  **Starts**23-JUL-2012 16:49:21
  ORACLE error 2149 in FDPSTP
  
  Cause: FDPSTP failed due to ORA-02149: Specified partition does not exist
  ORA-06512: at "SYSTEM.AD_DDL", line 165
  ORA-06512: at "APPS.MSC_MANAGE_PLAN_PARTITIONS", line 371
  ORA-14074: partition bound must collate higher than th
  +---------------------------------------------------------------------------+
  Start of log messages from FND_FILE
  +---------------------------------------------------------------------------+
  j := 1
  table := MSC_ATP_SUMMARY_SO
  partition_name : ATP_SUMMARY_SO__1
  l_count := 1
  Partition for instance 1 already exists
  table := MSC_ATP_SUMMARY_SD
  partition_name : ATP_SUMMARY_SD__1
  l_count := 1
  Partition for instance 1 already exists
  l_share_partition := N
  plan count := 0
  After Create Partitions
  +---------------------------------------------------------------------------+
  End of log messages from FND_FILE
  +---------------------------------------------------------------------------+
  

  How do you get this error?

  Please see (INSTALLER ALERT - setting the APS scores upward and Instance of Collections of data in R12 [552415.1 ID]).

  Thank you
  Hussein

• Vista Boot Camp partition does not start

  I have been using Fusion to open my Boot Camp with Vista Ultimate installed partition.  It worked fine for months.  Suddenly, I get a windows Boot Manager error.  The message says that some required files missing.  Here's the weird: I can open the Visa using Boot Camp partition.

  Any ideas?

  Tim

  Note: These steps assume that you have a default Apple installation of Windows and a VMware Fusion Boot Camp Virtual Machine default partition and if you changed the Boot Camp partition the Virtual Machine to add additional hard disks to be virtual or RAW disk then do not use these instructions unless you backup the Boot Camp partition the Virtual Machine package first.

  1. If the merger is open, close it.

  2. in a Terminal (/ Applications/Utilities/Terminal) copy and paste command, as the following and then press Enter and it will remove the Boot Camp Virtual Machine meta-data partition. Note: This does not affect the Boot Camp partition to install Windows. Also make sure that you copy the entire command below "rm" line at the beginning of the ' (quote) after the p in the Camp. "

  RM - dfr "/Users/$ the specified item was not found./Library/Application Support/VMware Fusion/Virtual Machines / Boot Camp."

  3. start Fusion (/ Applications/VMware Fusion.app) and select the Boot Camp partition on the library of the Virtual Machine window, and then click the run button.

  Notes: Then, an authentication dialog box appears. "VMware Fusion requires that you type your password." Enter your name and password, and then click OK. (It is necessary to remove the Boot Camp for the merge partition to access it directly).

  Then, we should see a Boot Camp partition message stating "VMware Fusion prepares your Boot Camp partition to run as a virtual machine. This may take a few minutes. This occurs once. »

  When the virtual partition Boot Camp Machine starts for the first time after this VMware Tools may want or will install/update and restart the virtual partition Boot Camp Machine.

• external Mac backup (partitioned) do not pick up

  Since the update of 10.11.6 (15G 31) my computer was not save its backup (this is a partitioned hard drive and reads the windows format section and not the section backup Mac)

  someone at - it advice or experienced a similar situation?

  Thank you!

  Erase the Mac volume and run another backup.

• Bootcamp partition does not appear at startup

  Hello

  I'm on iMac 27 inches, end of 2013, and I have a problem. A week ago I tried to clean my mac and start from the beginning. Because my mac has been very slow. Then I do what it takes. So, apparently, I erased all macintosh hd and leave bootcamp partition. So I used for a while because I was tired. And yesterday I don't know what I have everything in the bootcamp partition and recovery of mac has just finished after 4 hours I was relaxing and wanted to extend my bootcamp partition. I don't know how, I deleted both the partition boot and forcefully repeat thing of recovery for 4-5 hours. So now I mavericks, disc bootcamp as not a partition and a very weak internet because of the recovery. And cannot choose the startup as a bootcamp drive or can't do anything for the bootcamp partition disk utility... Can you help me? I'm sorry if I could not tell you very clearly

  Off topic: should I upgrade to el capitan and yosemite? Or leave it as Mavericks?

  Thanks for your replies!

  Zeliha

  

  If I were you I would ask here https://discussions.apple.com/community/windows_software/boot_camp

  or try to get someone to move your message here

• Mavericks on external partition does not start

  Hello

  I'm trying to implement the Mavericks on a partition on my external hard drive. Found several good guides on how but can't seem to boot from it.

  I created a Mavericks install USB and started one. I deleted the partition (guid partition map and extended journaled) where I wanted to install the Mavericks ran through the facility and said it will re-start automatically that it did.

  However it is started on my internal drive with OS X 10.11.4.

  The partition where the Mavericks has been installed is displayed in the Finder.

  The partition where the Mavericks has been installed is displayed as a virtual disk in system preferences, but when Source selected to restart, but after rebooting, it does not appear.

  When I hold the ket Option initially upwards, it does not seem to me to choose.

  I retried with 'createinstallmedia' https://support.apple.com/en-us/HT201372 and Diskmaker, but the same results.

  How can I solve why it why it seems installed, but is not a bootable disk?

  Thanks for any advice.

  Also...

  I use a partition of 100 GB of the Mavericks on a backup drive Seagate to Office for Mac 4.

• I use firefox on a computer with Windows XP and Ubuntu, with the card-Firefox profile in a separate, partition do not have to remove the 'blocking of parent' whenever I want to use Firefox.

  I have Firefox in the Windowspartition of my computer and the Linuxpartition from my computer, I have a third partition where I store my personal data, such as my Firefox-profile-map and my download card.
  If I'm not manually delete 'Parent Lock' Firefox will not start it is already an open session.
  It would be better not to have this system of parentlock.

  It would be better to use two separate profiles for each operating system and synchronize data between the two, because there can be other problems as well with the caches that use current versions of Firefox and other files that store the paths of dependent files of the OS.

  • http://KB.mozillazine.org/Using_multiple_profiles_-_Firefox