Pass/fail Oracle Applications BI ETL 11.1.1.8.1 e-mail
Could you please share how you have applied the success / failure email to Oracle BI Apps ETL 11.1.1.8.1. I created a procedure using code jython for e-mail. But I don't know where should I implement in terms of load.
And yet once this does not meet the issue as it has already developed in Jython and just asking how to include in a Plan to charge...
2782749 - in your support Plan, click the 'Exceptions' tab on the left side. There you can create Exceptions with certain scenarios, the parallel steps steps or stages of the series. Click on the Plus sign to add a new exception, then drag - move your ODI procedure on it. I'll add a script for her.
Once your Exception is defined, you can click the 'Steps' tab on the left. Select the step you want in the property pane, under the management of exceptions, Exception value, and not the one that you just created.
If all the steps of your Plan of care children have Exception behavior on 'Run Exception and Raise', you simply put this exceptional measure on the root_step.
It will be useful.
Kind regards
JeromeFr
Tags: Business Intelligence
Similar Questions
-
WebService call failed during the test adapter for oracle applications
In SOA 11 g, when I test my application that uses Oracle Applications card it gives an error "Webservice invocation failed. The error stack is
oracle.sysman.emSDK.webservices.wsdlapi.SoapTestException: Exception occurred when the link was invoked.
Exception occurred during invocation of the JCA binding: "binding JCA execute of operation 'getDailyRatesAdpSelect' failed due to the reference: connection problem component binding JCA.".
JCA Binding component is unable to create an outgoing connection of JCA (CCI).
+ OutboundR12:getDailyRatesAdp [getDailyRatesAdp_ptt::getDailyRatesAdpSelect (getDailyRatesAdpSelect_inputParameters, GlDailyRatesInterfaceCollection)]: the JCA Binding component was unable to establish an outgoing connection of JCA CCI due to the following problem: BINDING. JCA-12510 +.
Location of JCA resource adapter error.
Cannot find the adapter in JCA resources via the element of the binding .jca file
The Binding of JCA component is unable to the adapter resources specified in the startup item: location = "jdbc/EI/R12.
The reason is most likely to be
+ 1) the resource adapter RAR file has not been deployed successfully to the WebLogic application server or +.
+ 2) the "element in weblogic - ra.xml has not been defined in eis/jdbc/R12. In the latter case, you need to add a new factory of connections from WebLogic JCA (deploy a RAR). +
Please fix this and then restart the application server
The same as xADataSourceName the value of the Data Source JNDI name, but still get this error.
Specify the location of the ra.xml file - weblogic and steps to guide to solve this problem.
Thank you
SadiaLooks like the Oracle Application adapter is not running.
Connect to the weblogic administration console on your left window, click on * "Deployments" *, and then click your right window, under summary of deployments, check the status of * "OracleAppsAdapter."
It should be in Pavilion OK, so that it can reproduce and accepting applications.Thank you
Vijay -
How to define the result of a call sequence of pass/fail
Hi all
in my application, I have a pass/fail with the adapter of the test sequence. The Source of data for the stage is Step.Result.PassFail.
Is it possible to tell the appellant (the stage of appeal for success/failure sequence) the result within the sequence? I've experimented with the RunState.Caller, but did not find any property that applies to the PassFail result.
Madottati
This link is not very useful and, in my view, is not the right solution for you.
It makes not sense why you need to change the Step.Result.PassFail inside your sequence. It is not evaluated until after that sequence is returned to the caller. So why not just pass back a parameter and and set the Step.Result.PassFail parameter. I've attached a picture that shows.
However, if it is essential that you change in the subsequence Fail pass then use this expression:
RunState.Caller.Step.Result.PassFail = here, a Boolean expression
It won't evaluate at time of publishing, but will work during runtime.
The reason why you use Pass/Fail card combination and sequence is to create a modularized test. Let's say you need to call several code modules in order to obtain pass/fail status. Think of it as a function or a Subvi. It just creates a clean, maintainable code.
Hope this helps,
-
connection to the oracle application express using java and jdbc
Hello!
I am trying to build a java application using jbcd to connect to my Oracle Application Express DB but unable to connect actually using the following syntax:
Private final static String DB = "myworkspacename";
Private final static String RUTA public = "@apex.oracle.com:1521";
private public static final String URL = "jdbc: Slim:" + RUTA + "/" + DB;
private static final String DRIVER = "oracle.jdbc.OracleDriver";
a USER private final static string = " " [email protected] "; "
private final static String PASS = "MonMotpasse";
and then I start the connection via:
CONEX = DriverManager.getConnection(URL,USER,PASS);
but finally I get the following error:
IO error: the network adapter could not establish the connection
any ideas on what goes wrong will be appreciated...
Simple answer... YOU can't connect externally to the hosted instance of Oracle with a jdbc connection or sql developer/Toad. Not allowed...
If you need this capability, I would suggest downloading of Oracle 11 g XE and building you own database...
Thank you
Tony Miller
Software LuvMuffin
Ruckersville, WILL -
2013CPU APRIL: "the file in the patch is not a known file of the Oracle Applications.
Hello Experts.
We have just upgraded our database of 11.2.0 to 11.2.03
We then applied the PSU in APRIL 2013 to the database.
When we try to apply the patch at our level of applications:
Patch 16196188 : ORACLE APPLICATIONS 11I. ATG_PF. H RUP7: CPU PATCH FOR Apr 2013
On the application of this hotfix, the following errors is returned:
AutoPatch error:
File in the patch is not a known Oracle Applications file:
'paying pyauselp.jsp html '.
AutoPatch error:
File in the patch is not a known Oracle Applications file:
'paying pyshpslp.jsp html '.
It is Metalink Note
11.5.10.2: Patch 14782698 11I. ATG_PF. H RUP6: CPU PATCH for JAN 2013 fails with: file in the patch is not a known Oracle Applications
file: 'pay html pyshpslp.jsp' [1531423.1 ID]
The note suggests to apply
Patch 3500000 11i.HR_PF.K
Patch 6699770 11i.HR_PF. Kdelta 3 (HR Family Pack)
We use it to human resources and are not allowed to do this. We do not want to apply HR family pack.
We had to apply the CPU in October (14321240) in order to work around this problem. It's the latest CPU for EBS who does not have this error.
We have successfully applied the power supply Patch 16056266 for db layer (APRIL 2013)
This is why we are APRIL 2013 for the database layer and OCT2012 for Applications.
Two questions:
1 - is taken in charge (two different versions for POWER/CPU block for db / level apps)
2 is there a work around so that we can apply the APRIL2013 (16196188 Patch) to the Application layer?
Thank you.Hi Dan,.
1 - is taken in charge (two different versions for POWER/CPU block for db / level apps)
Yes it is supported.
2. is there a work around so that we can apply the APRIL2013 (Patch 16196188) to the Application layer?
Yes - Please proceed as follows:
1. copy pyshpslp.jsp manually from the patch directory in $PAY_TOP/html
2. make a backup of the file of the driver patch
3. change (u.drv) patch driver file and comment out the following line (# highlight the copy command) copy # pay html pyshpslp.jsp 115,3
Thank you
Hussein -
The Oracle Application 11i clonning error
Hi all again, a new day a new error :)
I have an error while clonning Oracle Application 11i on windows 2003 sp1 32-bit db 9.2.0.6.0
When you run adcfgclone.pl dbTier it runs successfully uptill 70% at this stage it throws the below error
================================================================================================
Beginning database layer apply - Wed Mar 7 01:49:19 2012
Logfile located at d:\oracle\neproddb\9.2.0\appsutil\log\NPRO_hassan\ApplyDBTier_03070149.log
RC-50004: Fatal: error in ApplyDatabase:
Creating control files is not
ERROR when executing apply...
ERROR: Cannot run adclone.pl
Check the log file.
=================================================================================================
When I check the ApplyDBTier_03070149.log
I found this below
==============================================================================================================================================================================================================================
Profile Phase jump
Jump apply Phase
Running StartDbLsnr...
ECHO is turned off.
ECHO is turned off.
Wednesday, March 7, 2012 01:50
ECHO is turned off.
ECHO is turned off.
Wednesday, March 7, 2012 01:50
NPRO_hassan.cmd exit with status 0
ECHO is turned off.
The environment settings are...
ECHO is turned off.
ORACLE_HOME: d:\oracle\neproddb\9.2.0
LOCAL: NPRO
ORACLE_SID:
PATH: D:\ORACLE\NEPRODDB\9.2.0\APACHE\PERL\5.00503\BIN\MSWIN32-X86\;D:\ORACLE\NEPRODDB\9.2.0\BIN;D:\ORACLE\NEPRODDB\9.2.0\JRE\1.4.2\BIN;D:\ORACLE\NEPRODDB\9.2.0\JRE\1.4.2\BIN;... /JRE/1.3.1/bin;d:\oracle\neproddb\9.2.0\Apache\perl\5.00503\bin\MSWin32-x86\perl.exe; C:\mksnt\bin; C:\mksnt\bin\X11; C:\mksnt\mksnt; C:\Windows\System32; C:\WINDOWS; C:\WINDOWS\System32\Wbem;d:\oracle\neproddb\9.2.0\Bin; d:\oracle\neproddb\9.2.0\jre\1.4.2\bin;d:\oracle\neproddb\9.2.0\jre\1.4.2\bin
LD_LIBRARY_PATH: d:\oracle\neproddb\9.2.0\lib
ECHO is turned off.
ECHO is turned off.
The log information is written to
'd:\oracle\neproddb\9.2.0\appsutil\log\NPRO_hassan\addlnctl.txt '.
ECHO is turned off.
ECHO is turned off.
From process to listen NPRO...
ECHO is turned off.
LSNRCTL for 32-bit Windows: release 9.2.0.6.0 - Production on 7 March 2012 01:50:56
Copyright (c) 1991, 2002, Oracle Corporation. All rights reserved.
Connection to (ADDRESS = (PROTOCOL = IPC) (KEY = EXTPROCNPRO))
AMT-12541: TNS:no listener
AMT-12560: TNS:protocol adapter error
AMT-00511: no listener
32-bit Windows error: 2: no such file or directory
Connection to (ADDRESS = (PROTOCOL = TCP (Port = 1534))(Host=hassan.com))
AMT-12541: TNS:no listener
AMT-12560: TNS:protocol adapter error
AMT-00511: no listener
32-bit Windows error: 61: unknown error
LSNRCTL for 32-bit Windows: release 9.2.0.6.0 - Production on 7 March 2012 01:50:57
Copyright (c) 1991, 2002, Oracle Corporation. All rights reserved.
From tnslsnr: Please wait...
TNSLSNR for 32-bit Windows: release 9.2.0.6.0 - Production
NL-00280: creation of the journal of the d:\oracle\neproddb\9.2.0\network\log\npro.log stream error
NL-00278: could not open the log file
SNL-00016: snlfohd: error opening file
32-bit Windows error: 13: permission denied
Listening port could start. See the above error messages...
addlnctl.cmd out with status 3
.end std out.
.end err out.
Run CreateDB...
---------------------------------------------------------------
ADX database utility
---------------------------------------------------------------
getConnectionUsingAppsJDBCConnector()->
APPS_JDBC_URL = "null".
Try to get by using connection based SID connect descriptor
getConnection()->
sDbHost: hassan
sDbDomain: com
sDbPort: 1534
sDbSid: NPRO
sDbUser: APPS
Try to connect using SID...
getConnectionUsingSID()->
JDBC URL: jdbc:oracle:thin:@hassan.com:1534:NPRO
Exception occurred: java.sql.SQLException: IO exception: the network adapter could not establish the connection
Try to connect using SID as ServiceName
getConnectionUsingServiceName()->
URL JDBC: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=hassan.com)(PORT=1534))(CONNECT_DATA=(SERVICE_NAME=NPRO)))
Exception occurred: java.sql.SQLException: IO exception: the network adapter could not establish the connection
Try to connect using SID as ServiceName.DomainName
getConnectionUsingServiceName()->
URL JDBC: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=hassan.com)(PORT=1534))(CONNECT_DATA=(SERVICE_NAME=NPRO.com)))
Exception occurred: java.sql.SQLException: IO exception: the network adapter could not establish the connection
Connection could not be obtained; return null
Database utility - ADX finished-
ECHO is turned off.
ECHO is turned off.
Wednesday, March 7, 2012 01:51
ECHO is turned off.
ECHO is turned off.
Wednesday, March 7, 2012 01:51
NPRO_hassan.cmd exit with status 0
ECHO is turned off.
The environment settings are...
ECHO is turned off.
ORACLE_HOME: d:\oracle\neproddb\9.2.0
LOCAL: NPRO
ORACLE_SID:
PATH: D:\ORACLE\NEPRODDB\9.2.0\APACHE\PERL\5.00503\BIN\MSWIN32-X86\;D:\ORACLE\NEPRODDB\9.2.0\BIN;D:\ORACLE\NEPRODDB\9.2.0\JRE\1.4.2\BIN;D:\ORACLE\NEPRODDB\9.2.0\JRE\1.4.2\BIN;... /JRE/1.3.1/bin;d:\oracle\neproddb\9.2.0\Apache\perl\5.00503\bin\MSWin32-x86\perl.exe; C:\mksnt\bin; C:\mksnt\bin\X11; C:\mksnt\mksnt; C:\Windows\System32; C:\WINDOWS; C:\WINDOWS\System32\Wbem;d:\oracle\neproddb\9.2.0\Bin; d:\oracle\neproddb\9.2.0\jre\1.4.2\bin;d:\oracle\neproddb\9.2.0\jre\1.4.2\bin
LD_LIBRARY_PATH: d:\oracle\neproddb\9.2.0\lib
ECHO is turned off.
ECHO is turned off.
The log information is written to
'd:\oracle\neproddb\9.2.0\appsutil\log\NPRO_hassan\adcrdb_NPRO.txt '.
ECHO is turned off.
ECHO is turned off.
Creating the NPRO database control file...
ECHO is turned off.
SQL * more: release 9.2.0.6.0 - Production on Wed Mar 7 01:51:01 2012
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
ERROR:
ORA-12560: TNS:protocol adapter error
DIM-00010: SYSTEM\CurrentControlSet\Services\OracleService key does not exist
S/O-error: (OS 2) the system cannot find the file specified.
SQL * more: release 9.2.0.6.0 - Production on Wed Mar 7 01:51:42 2012
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
ERROR:
ORA-01031: insufficient privileges
ORA-01031: insufficient privileges
ERROR:
ORA-01031: insufficient privileges
ORA-01031: insufficient privileges
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
ORA-01012: not connected
ERROR:
ORA-01031: insufficient privileges
ORA-01031: insufficient privileges
SP2-0640: not connected
SP2-0641: "EXECUTE" requires the connection to the server
ORA-01031: insufficient privileges
ERROR:
ORA-01031: insufficient privileges
ORA-01031: insufficient privileges
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
SP2-0640: not connected
ECHO is turned off.
Error checking...
ECHO is turned off.
The database was not created successfully. Stopping the instance...
SQL * more: release 9.2.0.6.0 - Production on Wed Mar 7 01:51:52 2012
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
ERROR:
ORA-01031: insufficient privileges
adcrdb.cmd out with status 1
.end std out.
.end err out.
---------------------------------------------------------------
ADX database utility
---------------------------------------------------------------
getConnectionUsingAppsJDBCConnector()->
APPS_JDBC_URL = "null".
Try to get by using connection based SID connect descriptor
getConnection()->
sDbHost: hassan
sDbDomain: com
sDbPort: 1534
sDbSid: NPRO
sDbUser: APPS
Try to connect using SID...
getConnectionUsingSID()->
JDBC URL: jdbc:oracle:thin:@hassan.com:1534:NPRO
Exception occurred: java.sql.SQLException: IO exception: the network adapter could not establish the connection
Try to connect using SID as ServiceName
getConnectionUsingServiceName()->
URL JDBC: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=hassan.com)(PORT=1534))(CONNECT_DATA=(SERVICE_NAME=NPRO)))
Exception occurred: java.sql.SQLException: IO exception: the network adapter could not establish the connection
Try to connect using SID as ServiceName.DomainName
getConnectionUsingServiceName()->
URL JDBC: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=hassan.com)(PORT=1534))(CONNECT_DATA=(SERVICE_NAME=NPRO.com)))
Exception occurred: java.sql.SQLException: IO exception: the network adapter could not establish the connection
Connection could not be obtained; return null
Database utility - ADX finished-
RC-00118: an error occurred during the creation of database
Asked by oracle.apps.ad.clone.ApplyDatabase
StackTrace:
java.lang.Exception: control file creation failed
to oracle.apps.ad.clone.ApplyDatabase. < init > (ApplyDatabase.java:474)
to oracle.apps.ad.clone.ApplyDatabase. < init > (ApplyDatabase.java:319)
to oracle.apps.ad.clone.ApplyDatabase. < init > (ApplyDatabase.java:295)
to oracle.apps.ad.clone.ApplyDBTier. < init > (ApplyDBTier.java:154)
the impossible (Native Method)
at oracle.apps.ad.clone.util.CloneProcessor.run(CloneProcessor.java:68)
at java.lang.Thread.run (unknown Source)
==============================================================================================================================================================================================================================
Please help me with your advice
Thank you
HassanHi Hassan,.
Is there a way to determine which application is locked this port that I tried again with a different port number and always the same result
I don't have any other application or OracleAS application server running on the machine that supposedly can block a port.Do you have any product Oracle installed on the same computer? Please see the referenced above.
You can try with a different port pool (i.e. 1 instead of 0) and see if you get the same error or not.
In addition, see utility Portmon which can be downloaded from http://technet.microsoft.com/en-us/sysinternals/bb896644 for a list of ports that are used on the same machine.
Thank you
Hussein -
Installation error Oracle Applications E-Business Suite R12
Hello world
I have the error during the installation of Oracle Applications E-Business Suite R12 on Windows server 2003 R12
Please help me
This is the log file:
Treatment DriverFile = E:\Oracle R12\Oracle12_Source\Oracle12\stage12i\startCD\Disk1\rapidwiz\template\adriapps.drv
Running instantiation drivers for E:\Oracle R12\Oracle12_Source\Oracle12\stage12i\startCD\Disk1\rapidwiz\template\adriapps.drv
instantiate the file:
Source: E:\Oracle R12\Oracle12_Source\Oracle12\stage12i\startCD\Disk1\rapidwiz\template\adrunias.cmd
dest: E:\oracle\VIS\inst\apps\VIS_erp\temp\adrunias.cmd
backup: E:\oracle\VIS\inst\apps\VIS_erp\temp\adrunias.cmd to E:\oracle\VIS\apps\apps_st\appl\admin\VIS_erp\out\templbac\adrunias.cmd
instantiate the file:
Source: E:\Oracle R12\Oracle12_Source\Oracle12\stage12i\startCD\Disk1\rapidwiz\template\adrunat.cmd
dest: E:\oracle\VIS\inst\apps\VIS_erp\temp\adrunat.cmd
backup: E:\oracle\VIS\inst\apps\VIS_erp\temp\adrunat.cmd to E:\oracle\VIS\apps\apps_st\appl\admin\VIS_erp\out\templbac\adrunat.cmd
Step 0-5
Command: E:\oracle\VIS\inst\apps\VIS_erp\temp\adrunias.cmd
Step 3 of 5
Step 1 of 5
Command: E:\oracle\VIS\inst\apps\VIS_erp\temp\adrunat.cmd
Step 4 of 5
instantiate the file:
Source: E:\Oracle R12\Oracle12_Source\Oracle12\stage12i\startCD\Disk1\rapidwiz\etc\adxdbctx.tmp
dest: E:\oracle\VIS\db\tech_st\11.1.0\appsutil\VIS_erp.xml
instantiate the file:
Source: E:\oracle\VIS\db\tech_st\11.1.0\appsutil\VIS_erp.xml
dest: E:\oracle\VIS\db\tech_st\11.1.0\appsutil\VIS_erp.xml
instantiate the file:
Source: E:\oracle\VIS\db\tech_st\11.1.0\appsutil\VIS_erp.xml
dest: E:\oracle\VIS\db\tech_st\11.1.0\appsutil\VIS_erp.xml
instantiate the file:
Source: E:\Oracle R12\Oracle12_Source\Oracle12\stage12i\startCD\Disk1\rapidwiz\etc\adxmlctx.tmp
dest: E:\oracle\VIS\inst\apps\VIS_erp\appl\admin\VIS_erp.xml
instantiate the file:
Source: E:\oracle\VIS\inst\apps\VIS_erp\appl\admin\VIS_erp.xml
dest: E:\oracle\VIS\inst\apps\VIS_erp\appl\admin\VIS_erp.xml
instantiate the file:
Source: E:\oracle\VIS\inst\apps\VIS_erp\appl\admin\VIS_erp.xml
dest: E:\oracle\VIS\inst\apps\VIS_erp\appl\admin\VIS_erp.xml
instantiate the file:
Source: E:\Oracle R12\Oracle12_Source\Oracle12\stage12i\startCD\Disk1\rapidwiz\etc\adxdbctx.tmp
dest: E:\oracle\VIS\db\tech_st\11.1.0\appsutil\VIS_erp.xml
instantiate the file:
Source: E:\oracle\VIS\db\tech_st\11.1.0\appsutil\VIS_erp.xml
dest: E:\oracle\VIS\db\tech_st\11.1.0\appsutil\VIS_erp.xml
instantiate the file:
Source: E:\oracle\VIS\db\tech_st\11.1.0\appsutil\VIS_erp.xml
dest: E:\oracle\VIS\db\tech_st\11.1.0\appsutil\VIS_erp.xml
instantiate the file:
Source: E:\Oracle R12\Oracle12_Source\Oracle12\stage12i\startCD\Disk1\rapidwiz\etc\adxmlctx.tmp
dest: E:\oracle\VIS\inst\apps\VIS_erp\appl\admin\VIS_erp.xml
instantiate the file:
Source: E:\oracle\VIS\inst\apps\VIS_erp\appl\admin\VIS_erp.xml
dest: E:\oracle\VIS\inst\apps\VIS_erp\appl\admin\VIS_erp.xml
instantiate the file:
Source: E:\oracle\VIS\inst\apps\VIS_erp\appl\admin\VIS_erp.xml
dest: E:\oracle\VIS\inst\apps\VIS_erp\appl\admin\VIS_erp.xml
Availability of data
-----------------------
command: cmd.exe /c sqlplus E:\Oracle R12\Oracle12_Source\Oracle12\stage12i\startCD\Disk1\rapidwiz\bin\riwTDBup.cmd E:\oracle\VIS\db\tech_st\11.1.0\VIS_erp.cmd E:\Oracle R12\Oracle12_Source\Oracle12\stage12i\startCD\Disk1\rapidwiz\bin\riwTDBup.sql APPS/APPS
'E:\Oracle' is not recognized as an internal or external command
operable program or batch file.
RW-50011: error:-connection of database ORACLE_HOME test returned an error: 1
command: cmd.exe /c sqlplus E:\Oracle R12\Oracle12_Source\Oracle12\stage12i\startCD\Disk1\rapidwiz\bin\riwTDBup.cmd E:\oracle\VIS\inst\apps\VIS_erp\ora\10.1.2\VIS_erp.cmd E:\Oracle R12\Oracle12_Source\Oracle12\stage12i\startCD\Disk1\rapidwiz\bin\riwTDBup.sql APPS/APPS
'E:\Oracle' is not recognized as an internal or external command
operable program or batch file.
RW-50011: error:-connection Apps ORACLE_HOME test returned an error: 1
Download of the configuration
----------------------
Download the D:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\08030118\conf_VIS.txt config file
AppsConfig: "config.txt" download...
---------------------------------------------------------------
ADX database utility
---------------------------------------------------------------
getConnectionUsingAppsJDBCConnector()->
APPS_JDBC_URL = "null".
Try to get by using connection based SID connect descriptor
getConnection()->
sDbHost: erp
sDbDomain: erp
sDbPort: 1521
sDbSid: SCREW
sDbUser: APPS
Try to connect using SID...
getConnectionUsingSID()->
JDBC URL: jdbc:oracle:thin:@erp.erp:1521:VIS
Exception occurred: java.sql.SQLException: IO exception: the network adapter could not establish the connection
Try to connect using SID as ServiceName
getConnectionUsingServiceName()->
URL JDBC: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=erp.erp)(PORT=1521))(CONNECT_DATA=(SERVICE_NAME=VIS)))
Failed download of the config file to D:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\08030118\conf_VIS.txt
The environment file
------------------
RW-50016: error:-database's ORACLE_HOME environment file not created:
File = E:\oracle\VIS\db\tech_st\11.1.0\VIS_erp.env
RW-50016: error:-file environment ORACLE_HOME Apps was not created:
File = E:\oracle\VIS\inst\apps\VIS_erp\ora\10.1.3\VIS_erp.cmd
RW-50016: error:-iAS ORACLE_HOME environment file has not been created:
File = E:\oracle\VIS\inst\apps\VIS_erp\ora\10.1.2\VIS_erp.cmd
RW-50016: error:-environment APPL_TOP file not created:
File = E:\oracle\VIS\apps\apps_st\appl\VIS_erp.cmd
RW-50016: error:-ADOVARS of the environment file has not been created:
File = E:\oracle\VIS\apps\apps_st\appl\admin\adovars.cmd
RW-50016: error:-APPSCONFIG not created:
File = E:\oracle\VIS\apps\apps_st\appl\admin\adconfig.txt
DBC file
----------
RW-00023: error:-DBC file has not been created:
File = E:\oracle\VIS\inst\apps\VIS_erp\appl\fnd\12.0.0\secure\VIS.dbc
HTTP
------
check the URL = http://erp.erp:8000
RW-50015: error:-HTTP listener does not. The service may not be started on the port again. Please check the service and use the button try again.
Help page
-----------
check the URL = http://erp.erp:8000/OA_HTML/help
RW-50015: error:-Help Page does not. The service may not be started on the port again. Please check the service and use the button try again.
Virtual directory
-------------------
RW-50015: error:-Http virtual directory server is not responding. The service may not be started on the port again. Please check the service and use the button try again.
JSP
-----
check the URL = http://erp.erp:8000/OA_HTML/jtfTestCookie.jsp
RW-50015: error:-JSP does not. The service may not be started on the port again. Please check the service and use the button try again.
Login page
------------
RW-50015: error:-Login Page does not. The service may not be started on the port again. Please check the service and use the button try again.Treatment DriverFile = E:\Oracle R12\Oracle12_Source\Oracle12\stage12i\startCD\Disk1\rapidwiz\template\adriapps.drv
You cannot use spaces in file names, so I think that these errors are because you use a space in the name of the directory (Oracle R12) - Please change the name of the directory to another name without spaces (e.g. OracleR12) and retry the installation then.
Thank you
Hussein -
Hello
Am getting the following error when applying patches autoconfig.
$FND_TOP/patch/115/bin/txkprepatchcheck.pl
Perl not defined to the Oracle Applications environment. (Libraries not in the INCLUSION list T2K)
Make sure that automatic configuration was performed and found a source correctly your environment.
/U01/tech/appl/FND/11.5.0/patch/115/bin/txkprepatchcheck.pl line 131.
BEGIN failed--compilation missed the line 141 /u01/tech/appl/fnd/11.5.0/patch/115/bin/txkprepatchcheck.plFine.
(1) source the environment file
(2) make sure that 'APPLRGF' variable is set in the environment. If this isn't the case, set it to the same value as "APPLTMP".
(3) in the place where this patch was unzipped, patch_top/patchnumber/fnd/patch/115/bin.Run the utility as follows:
Platform command line
UNIX or Linux (must be a single line)
./txkprepatchcheck.pl-script = ValidateRollup-outfile = $APPLTMP/txkValidateRollup.html - appspass =do not FND_TOP/patch/115/bin
-
Oracle Application Server is Weblogic Server?
After almost 2 years of struggle, I was able to persuade our management move to IBM's websphere server Oracle servers. With the benefits that I have pointed out during the final debate, they agreed to choose Oracle as the future of our Bank. (We are currently using Oracle database 10g and Warehouse Builder, but not other products). The conclusion of the meeting Oracle Weblogic server was proposed to buy.
Reasons:
1. business assistance failed to implement our development environment to use JSF2.0 without any problem.
2 IBM cool a large sum of money for licenses of RAD (which is the only IDE that can be used to develop applications for server Websphere)
3. because they don't offer any express Edition (free) of these tools, we cannot move forward with R & d (we are limited)
1. as developer J is free and Netbeans also supports Weblogic server, we have no restrictions on the use of these tools in the IDE. (reduce costs)
2. given that Netbeans IDE is frequently updated with the latest technologies, we will not be limited to any version of technology or it is specified
3. personally, I think that Oracle community forum also much richer than IBM support has paid a pension from the company. (I had to wait almost 3 and 1/2 months to get the first response to a question about changing IBM has BEEN political 7 server class loader. "But I never waited on this community forum Oracle more than 5 minutes or a few browser refreshes to any of my questions).
Because of these reasons and more than a few reasons, our management decided to move to Oracle weblogic server. For now I'm the only Oracle fan in our Bank of sdf (Sri Lanka) THIS Department, I was struggling to make this decision for a long time. I introduced the Oracle tools such as developer SQL & maker of data to our team members and discouraged using any other tools from 3rd party (including cracked software, which we are not allowed to use). So now I'm happy because what I did was not for nothing and became successful, finally.
But I still haven't any idea if Oracle Application Server and Oracle Weblogic Server are the same or different servers. So please help me to get confirmed, and I appreciate if you can tell me what are the differences between these two (if these two names do not represent the same server).
Thank you.
Edited by: NIghtbeat on February 8, 2011 09:23Nightbeat,
Looks like you put a lot of work into your proposal.
In my opinion, I would stick with Oracle WebLogic Server because it's strategic server platform to proceed for JEE6. WebLogic 10.3.4.0 is compliant JEE5 but also supports most JEE6 specification of the API as a JPA 2.0, JSF 2.0 and JAX - RS 1.1 (not to mention executives like consistency 3.6 and Spring 3.0 - where the spring can be used instead of the Web Profile missing including EJB 3.1 Lite). SV which includes OC4J can support the latter with additional configuration except for details such as $proxy JEE6 level code injection.
Criticism issue I see is the container API dependency injection managed as JTA transactions and plant persistence JPA management in EJB session beans. OC4J that the DI engine has not been updated as the spring according to engine DI in WebLogic must be able handle the new JEE5 and JEE6 proxies for these objects.Oracle Fusion Middleware 11.1.1.4
http://download.Oracle.com/docs/CD/E17904_01/index.htmActivation of JPA 2.0
http://download.Oracle.com/docs/CD/E17904_01/Web.1111/e13720/using_toplink.htm#EJBAD1309When you start using the persistence API - you are welcome on the following forums as well.
TopLink/JPA
http://www.Eclipse.org/forums/index.php?t=thread&frm_id=111
http://dev.Eclipse.org/mhonarc/lists/EclipseLink-users/maillist.html/ Michael
-
Failure research Oracle Application Server when installing EM grid control
Not to seek the Oracle Application Server during the installation of 10.2.0.3 on Windows XP EM grid control.
I uninstalled the old database from Oracle 10 g and I have also remove all oracle related services and programs the services.msc and unregistry all related services of the registry Hkey. Now I install EM Grid Control with a new database.
I don't have any MetaLink account now.
Journal of G:\OracleHomes\agent10g\cfgtoollogs\configToolFailedCommands massage
The journal of C:\Program Files\Oracle\Inventory\logs\installActions2009-12-27_12-12-43 messages...Command: oracle.sysman.emcp.agent.AgentPlugIn
Thank you for the helpStarting Agent Command = oracle.sysman.emcp.agent.AgentPlugIn has failed Exception : java.lang.Exception: Management Agent Configuration Assistant is failed. The following failed messages are recorded: configureAgent: Search on a non-RAC system: Fail to search Oracle Application Server. Info: Configuration Assistant "Agent Configuration Assistant" is fail. ----------------------------------------------------------------------------- *** Starting OUICA *** Info: Created a new file G:\OracleHomes\agent10g\cfgtoollogs\configToolFailedCommands Info: Since the option is to overwrite the existing G:\OracleHomes\agent10g\cfgtoollogs\ configToolFailedCommands file, backing it up Info: The backed up file name is G:\OracleHomes\agent10g\cfgtoollogs\configToolFailed Commands.bak Warning: OUI-25031: Some Configuration Assistant is failed. We recommend you to retry Configuration Assistant. ...
Published by: junez on December 27, 2009 10:17Please visit the following link. I think that is the key question.
http://krsethur.WordPress.com/2006/06/13/uninstalling-Oracle-10G-manually-from-Windows-XP/
-
Business Publisher in Oracle Application Server
Hello
I'm looking to deploy the BPA business editor (10.1.3.4) on a 10.1.3.4 Oracle application server and I have very little instructions or documentation on how to undertake this task.
Installation of BPA and State Administration guides that you are using an Oracle Application Server is a supported configuration for the Publisher of Business with little or no information on how to do this!
I managed to deploy and configure, to the best of my knowledge, the businesspublisher.war as well as its sources of required data, changes DAO, etc..
I can access the interface of web Publisher Business and its shows no export existing currently.
I try to add the new Oracle based Publisher Business Server applications server to my Business Architect Editor (i.e., but it keeps failing to connect and BPA hangs until I have the strength that it ends!)
I see that the BPA repository host establishes a connection with the host business editor IDE oucederomsurlesecondport 17059 (the default port), but nothing else happens.
[oracle@***]$ netstat - a |] grep 17059
TCP 0 0 *: 17059 *: * LISTEN
TCP 111 0 host.domain:17059 host.domain.:2519 ESTABLISHED
I have undertaken a number of successful installation, deployment and exports BPA to Business Editor using TomCat on Windows, Linux and SUN, but have now ceased completely on how to undertake this on Oracle Application Server.
Can someone point me in the direction of any documentation or information on how to accomplish this task?
JohnThere is a document which provides the installation for OAS called Oracle + EPS + Suite + 10.pdf that was sent to us by Oracle.
Not sure where to find documentation in there, but it offers instructions for deploying the war to the United Nations. There are also some files that need to be configured so that it works as well.
I would like to upload on this ticket, but do not see anywere for that.
Let me know if you can't find it, and I can send it to you. [email protected]
-
Various problems related to the tests for Oracle Applications R12 PreInstall HCVE
Hello world
I am preparing a Linux machine for installation of Oracle Applications R12 and currently I have several problems with the HCVE tests that are part of the ANR ([Doc ID 250262.1| https://metalink.oracle.com/metalink/plsql/f?p=130:14:4000869102561861013:p14_database_id, p14_docid, p14_show_header, p14_show_help, p14_black_frame, p14_font:NOT, 250262.1, 1, 0, 0, helvetica]). Here are the first two problems:
1. when I run the RDA (. rda.pl t hcve) and select a test (in this case, "Oracle Database 11 g R1 (11.1.0) PreInstall (Linux AMD64)"), the script wonder of the JDK 'House '. Why the script asks if the installation process will install JDK? If I jump it (i.e. just press enter), the JDK test shows up as failed in the results. What should I put here?
2. the tests 'process limit' and 'Limit descriptors' fail both:
A00120 doesn't have a process boundary less 16384
A00130 FAILURE of lower limit to 65536 descriptors
I put these two values in /etc/security/limits.conf according to the instructions here: [Doc ID 761566.1| https://metalink2.oracle.com/metalink/plsql/f?p=130:14:4000869102561861013:p14_database_id, p14_docid, p14_show_header, p14_show_help, p14_black_frame, p14_font:NOT, 761566.1, 1, 1, 1, helvetica]
Here are the lines I added to limits.conf:
# To install Oracle (MetaLink Doc ID: 761566.1)
* hard nofile 65535
* soft nofile 4096
* nproc 16384 hard
* soft nproc 2047
Why so this test fails?
-KyleKyle,
You can submit feedback and send an email to Support of Oracle ([email protected]). The link 'Submit comments' is available in most of the documents of Metalink GDR (Diagnostics).
Kind regards
Hussein -
Safe to remove mcf for Oracle Application Adapter Properties?
Hi all
I want to delete properties from mcf in my application adapter Oracle (to connect to a business event), but I can't deploy the process more.
Can anyone help?
Jdev: 10.1.3.4.0.4270
SOA Suite: 10.1.3.4 on AIX 5.3
->
<! - these mcf properties are safe to remove. - >
< jca:address location = "jdbc/fmis' UIConnectionName = 'FMIS" UIOracleAppType = "WFBES" UIWfEventName = "xx.oracle.apps.ap.event.xmlRemit"
ManagedConnectionFactory = "oracle.tip.adapter.apps.AppsManagedConnectionFactory"
MCF. ConnectionString="jdbc:oracle:thin:@server1.test.com.au:1524:B2B1".
MCF. UserName = "apps".
MCF. Password = "7CC4D295E4DDDA919427B6716C0BDD1D" / >
-> to
< jca:address location = "jdbc/fmis' UIConnectionName = 'FMIS" UIOracleAppType = "WFBES" UIWfEventName = "xx.oracle.apps.ap.event.xmlRemit"
ManagedConnectionFactory = "oracle.tip.adapter.apps.AppsManagedConnectionFactory" / > "
-> Error message
BUILD FAILED
C:\projects\eProcurement\PAEBSToB2B\build.XML:78: A problem occurred when connecting to the server "server1.test.com.au" using the '7783' port: bpel_PAEBSToB2B_1.0.jar failed to deploy. Exception message is: ORABPEL-09903
Could not initialize the agent of activation.
An error occurred during initialization of a process enabling agent 'PAEBSToB2B', version "1.0".
Please ensure that the agents of activation are configured correctly in the bpel (bpel.xml) deployment descriptor.
oracle.tip.adapter.fw.agent.jca.JCAActivationAgent: ORABPEL-12517
AdapterFrameworkImpl::endpointActivation - Activation of endpoint error.
Resources adapter Oracle Applications adapter could not activate oracle.tip.adapter.apps.AppsWFBesQueueDequeueActivationSpec endpoint: {OpaqueSchema = false, DatabaseSchema = APPS, QueueName = WF_BPEL_Q, consumer = ORA_6os32h1m84r38di684rj2c1k61, MessageSelectorRule = tab.user_data.event_name = "xx.oracle.apps.ap.event.xmlRemit", AppsEventSchema = NO_SCHEMA} for the following reason: ORABPEL-00000
Error in creating the managed connection pool. Invalid connection Cache name. Must be a valid string and a single
Please correct the reported problem and redeploy the BPEL process.
at com.collaxa.cube.engine.core.BaseCubeProcess.startAllActivationAgents(BaseCubeProcess.java:428)
at com.collaxa.cube.engine.deployment.DeploymentManager.activateDefaultRevision(DeploymentManager.java:1733)
at com.collaxa.cube.engine.deployment.DeploymentManager.setDefaultRevision(DeploymentManager.java:1691)
at com.collaxa.cube.engine.deployment.DeploymentManager.deployProcess(DeploymentManager.java:950)
at com.collaxa.cube.engine.deployment.DeploymentManager.deploySuitcase(DeploymentManager.java:792)
at com.collaxa.cube.ejb.impl.BPELDomainManagerBean.deploySuitcase(BPELDomainManagerBean.java:455)
at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:79)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
at java.lang.reflect.Method.invoke(Method.java:618)
at com.evermind.server.ejb.interceptor.joinpoint.EJBJoinPointImpl.invoke(EJBJoinPointImpl.java:35)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
to com.evermind.server.ejb.interceptor.system.JAASInterceptor$ 1.run(JAASInterceptor.java:31)
at com.evermind.server.ThreadState.runAs(ThreadState.java:693)
at com.evermind.server.ejb.interceptor.system.JAASInterceptor.invoke(JAASInterceptor.java:34)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.TxRequiredInterceptor.invoke(TxRequiredInterceptor.java:50)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.InvocationContextPool.invoke(InvocationContextPool.java:55)
at com.evermind.server.ejb.StatelessSessionEJBObject.OC4J_invokeMethod(StatelessSessionEJBObject.java:87)
at DomainManagerBean_RemoteProxy_4bin6i8.deploySuitcase (unknown Source)
at com.oracle.bpel.client.BPELDomainHandle.deploySuitcase(BPELDomainHandle.java:319)
at com.oracle.bpel.client.BPELDomainHandle.deployProcess(BPELDomainHandle.java:341)
at deployHttpClientProcess. jspService(_deployHttpClientProcess.java:376)
at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:462)
at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:594)
at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:518)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64)
to oracle.security.jazn.oc4j.JAZNFilter$ 1.run(JAZNFilter.java:400)
at java.security.AccessController.doPrivileged(AccessController.java:279)
at javax.security.auth.Subject.doAsPrivileged(Subject.java:727)
at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:414)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:623)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:313)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:199)
to oracle.oc4j.network.ServerSocketReadHandler$ SafeRunnable.run (ServerSocketReadHandler.java:260)
to com.evermind.util.ReleasableResourcePooledExecutor$ MyWorker.run (ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:810)
Total time: 40 seconds
Kind regards
KerrMcf properties should be withdrawn as a best practice, regardless of the environment. Development is probably the environment more important to revome such that it will be this object that gets migrated as part of the lifecycle developmentn. As much as I know I've never seen a dependency on these parameters in JDev, so they can be dismissed at pleasure.
The question in dispute. Looking at your it looks that you have correctly entered your JNDI name in
You specified jdbc/fmis. This seems to be more than one data source name is not a jndi name. I expect to see something like eis/Apps/fmis.
This must be entered in your connection pool.
In EM-> oc4j_soa-> applications-> default-> Apps adapter.
This must match your JDeveloper entry. If you establish as common naming method, it should be no problem with the transfer between the developers code.
see you soon
James -
Oracle Application Testing Suite with Apex
Hello
I review the feasibility of the use of Oracle Application Testing Suite with Apex to test the features and scalability. I tried to test the navigation and the process but am unable to get accurate results. Is it possible to make a page fails if an ora error message appears on the screen.
I also tried to create a control test it is a logon has succeeded. If the operation is successful, the user is navigated to a page. I then adjust the code in the application to make the logon fails. I'm waiting for the result of demonstrated not in the script. No matter how hard I try, I can't get the results of success. Does anyone have an idea on how test Application Apex Oracle
Any help would be much appreciated
KeV"Insert a custom object of test."
What version do you use? -
capture the data of Internet users access to oracle application server
How to capture the details (for example, user, date & time of session id, ip address, etc) of all users (in home, vpn access, etc.) to access the oracle application server.Hello
If you use $ORACLE_HOME/webcache/newspapers you can view access logs because all traffic passes through...
concerning
Maybe you are looking for
-
iPhone bluetooth connectivity 7
I've recently upgraded to the iPhone 7 and have had problems of intermittent connectivity with Bluetooth pairing, especially in my vehicle (Kia Optima), but also sometimes with my bluetooth (Jawbone Jambox Big) speaker. With my iPhone 6s, I could alw
-
How can I make my officejet 6500 a print in black and white only?
I am trying to print documents, not photos, in black and white. The computer is a Macbook Air. I'm looking for the manual, and I don't see how to set up printing black and white document WITHOUT PRINTING FAST current of AIR. Thanks a lot for helpin
-
Satellite 2210CDT: hardware upgrade
Hello again! I'll update my Toshiba hadware a little... 1: 196 MB RAM upgrade - I bought SODIM 128 but How to put inside - do I have to unscrew everything laptop? 2: upgrade CD DVD: but can give me these details: How is it fixed and the size and what
-
Noticed that there is a 3rd account next to the mine, the administrator and my accounts of girls, UpdatusUser, that it is and what its use for is what interests me, and if I can delete it, I would like to know how.
-
Lightroom does not work after installation
Installed in Lightroom and it started. It does not work with the following messagesFirst "error when attempting to change modules."Second ' could not create the required folder: Users/timofeiesaulov/Library/Application Support/Adobe/Lightroom/Develop