Passing a value to the parameter variable
Here is a general example (all the code):_Global.XPosition = {function(whichMc:MovieClip,_xStart:Number,_xEnd:Number):Void}
new Tween (whichMc, "_x", Strong.easeOut, xStart, xEnd, 1, true);
}
function loadFunction(success:Boolean):Void {}
If (success) {}
var image01ClosedPosition:Number = this.firstChild.childNodes [0].attributes.imageChangeX;
hit01.onRollOver = function() {}
xPosition(img01,image01ClosedPosition,0);
}
}
In the XML file, the value in the fact that I'm pulling is - 29.
If I do a trace of imag01ClosedPosition, I get the correct value of-29.
If I change the call to the function to read xPosition(img01,-29,0); This also works
I can't make it work the way I have it above.
(I know that I failed a lot, but I wanted to give you an idea of the part that does not work.)
Thank you, kglad. I wondered about this. I thought that the setting of a variable data type: number, it would have been a number, but I never got an error in the debugger so I thought it was ok. I traced the data type and figured out it was actually a string and changed the following line which has transformed the string to an integer and does the job:
var image01ClosedPosition:Number = parseInt (RootNode1.attributes.imageChangeX);
Tags: Adobe Animate
Similar Questions
-
a problem in passing multiple values in the loop settings for
Hi all
I am facing a problem in passing multiple values in the loop settings for.
EX:
CREATE or REPLACE PROCEDURE (pr_id OUT NUMBER) HAVE
tab type is table of NUMBER;
TEMP_TAB TAB;
BEGIN
Select the COLLECT LOOSE pr temp_tab pr_id;
I'm in 1.TEMP_TAB. loop of COUNTING
PR_ID: = temp_tab (i);
end loop;
END TEST;
OUTPUT:-
pr_id = 234578
in the example above, I'm only a value as an out parameter. but I send you PR_ID of the loop.
why I don't get all the values that the parameters.please offer a solution for me.
Thank you my friend.More clarification, let's look at your code...
-- create a procedure and have a single numeric out variable CREATE OR REPLACE PROCEDURE TEST ( pr_id OUT NUMBER ) AS -- declare a type as an array of numbers type tab is table of NUMBER; -- declare a varianble of that array type TEMP_TAB TAB; BEGIN -- query all the values from the table into the array select pr_id BULK COLLECT INTO temp_tab from pr; -- loop through each value in the array for i in 1..TEMP_TAB.COUNT loop -- set the value of the single OUT parameter, OVERWRITING any previous value it has PR_ID := temp_tab(i); -- loop around to the next value end loop; -- end the procedure with the final value of PR_ID END TEST;
-
How to get the value of the parameter to form of oracle from the html page
Hello
I want to know that is it possible to grab the value of the parameter of the html page and display on my oracle ACTIVE form.
Kind regards
RazaPass the parameter in the HEART
as
hrtest/dev60cgi/ifcgi60.exe? Form=LOGIN_FORM_Para.FMX&width=1000&height=700&userid=123/123@test&otherparams=Pakistan=Allah ".
Set a: PARAMETER. PAKISTAN on form
and write after outbreak
BEGIN
If: PARAMETER. PAKISTAN = "ALLAH" then
message ('HO ALLAH AKBAR');
message ('HO ALLAH AKBAR');
message(:Parameter.) PAKISTAN | ("AKBAR HO');
message(:Parameter.) PAKISTAN | ("AKBAR HO');
on the other
message ("INSH' |: PARAMETER.") (PAKISTAN);
message ("INSH' |: PARAMETER.") (PAKISTAN);
end if;END;
Kind regards
Khurram Altaf
-
package Testen;
public class average
{
public double average (int zahlen)
{
System.out.println (Zahlen);
back numbers;
}
/**
*
@param args
*/
Public Shared Sub main (String [] args)
{
Average average = new Durchschnitt();
}
}
I would like to test a method with a parameter in JDeveloper10g
Where can I put in the value of the parameter "zahlen" before the race?
After running, I get the following messages:
[13: 55:04] successful compilation: 0 errors, 0 warnings.
Testen.Durchschnitt
Process has finished with exit code 0.Argh so bad with this Java code, I almost give up ;)
Please do not use average so many times (class name, method name, but not a constructor, the variable name).
package Testen; public class Durchschnitt { public double do(int zahlen) { System.out.println(zahlen); return zahlen; } /** * * @param args */ public static void main(String[] args) { Durchschnitt d= new Durchschnitt(); double retval = d.do(**put your value for zahlen here**) } }
but so many uses of Durchshnitt make it so difficult to understand what you really want to do.
John
-
Cannot get the value of the session variable (using row wise initialization).
Hi all
I have a scenario where I'm trying to get the value of the variable session of two columns.
Table of database consists of the name of USER, Country_Region, columns Country_SubRegion.
For example: ChadraKanth, Americas, America West is the data.
I wrote a Sql query in the block of session initialization:
Select "CR", Country_Region, Country_SubRegion
of row_wise_init
where USERID = ": the USER"
When I test the RPD code gives the result like this:
CR WesternAmerica of Americas.
In my report I have two columns, a region and an another subregion.
When I try to filter with the session variable "CR" for the column region his error giving: session variable is not initialized with
This is the default.
Question:
1. session variable is contains several values in the column?
2. how to filter the report on columns of region and sub region?
Please suggest me.
Kind regards
Chandra Khalil.
Hello
A session variable cannot store more than one column, 1 variable = 1 value (column 1), horizontal initialization allows to store several lines, multiple values in the same variable.
If to a user, you have several lines with multiple values, you need horizontal initialization, but it cannot store in the variable the value of the region and subregion.
-
Why can't I just show the value of the reference variable on name full column
Hello everyone,
I want to display the value of the reference variable as column name for one of my analysis on OBIEE. However, when I write, it does not show the value, it shows just as text;
VALUEOF ("rv_yesterday")
How can I show the value of it?
Can you help me please.
Kind regards
Dilek
Raja,
What is a date or a related data type in any variable of RPD - session or repository - will become a datetime. That's a given and you can play as much as you want with to_date, trunc, DATE (the way of the RPD), but will it be a datetime value. Period.
Only when she is cast to a string rather than one of the 'date' data types can get rid of the component "hour".
Edit: Sorry, I forgot to add: < dilek,="" that="" response="" is="" your="" answer="" as="" well,="" sorry.="" no="" "date="" without="" time="" component="" in="" proper="" data="" types."=""> >
-
Hello community, I have a problem when creating a function. The purpose of this function is to check the table of weather gave yesterday or not. We must check this on different tables on different sachems. We are creating a function with input variables.
CREATE OR REPLACE FUNCTION IN_SCHEMA.IS_YDAYDATA_TO_TABLE
(
in_schema IN VARCHAR2,
in_tablename IN VARCHAR2,
in_datefield IN VARCHAR2,
)
RETURNS INTEGER
AS
-Declaring variables
v_is_true INTEGER.
BEGIN
SELECT
CASE
WHEN MAX (in_datefield) = TRUNC(SYSDATE-1)
THEN 1
ON THE OTHER
0
END
IN
v_is_true
Of
in_schema.in_tablename
;
RETURN v_is_true;
END;
/
When creating, I got error: [error] ORA-00942 (44:19): PL/SQL: ORA-00942: table or view does not exist
How to use the values of the input variables on the table select statement names?
Hello
Here's a way you can use dynamic SQL statements for this task:
CREATE OR REPLACE FUNCTION IS_YDAYDATA_TO_TABLE
(
in_schema IN VARCHAR2,
in_tablename IN VARCHAR2,
in_datefield IN VARCHAR2,
in_first_date DATE DEFAULT SYSDATE - 1,.
in_last_date DATE by DEFAULT NULL
)
RETURNS INTEGER
AS
-IS_YDAYDATA_TO_TABLE returns 1 if in_schema.in_tablename.in_datefield
-contains all the dates in the in_first_date of the range through included in_last_date
- and it returns 0 if there is no such lines.
-If in_last_date is omitted, the search only the data on in_first_date.
-If in_first_date is omitted, it defaults to yesterday.
-Time parts of the in_first_date and in_last_date are ignored.
-Declaring variables
sql_txt VARCHAR2 (1000);
v_is_true INTEGER.
BEGIN
sql_txt: = 'SELECT COUNT (*).
|| 'FROM ' | in_schema | '.' || in_tablename
|| 'WHERE ' | in_datefield | ' > =: d1'
|| «AND» | in_datefield | '< > >
|| 'AND ROWNUM = 1';
dbms_output.put_line (sql_txt |) '= sql_txt in IS_YDAYDATA_TO_TABLE"); -For debugging
Sql_txt EXECUTE IMMEDIATE
IN v_is_true
With the HELP of TRUNC (in_first_date) - d1
TRUNC (NVL (in_last_date
in_first_date
)
) + 1 -- d2
;
RETURN v_is_true;
END is_ydaydata_to_table;
/
DISPLAY ERRORS
If you must use dynamic SQL statements, put all the SQL statement in a single string variable, such as sql_txt in the example above. In this way, you can easily see exactly what will be executed. Comment out the call to dbms_output under test is completed.
Try to write functions that will address not only the question that you have now, but similar questions that you may have in the future. For example, now that interest you only to the verification of the data of yesterday, but later, you might want to check another day or range of days. The above function combines the convenience of a function simple (looks like yesterday data if you don't tell him otherwise) with the power of a more complex function (you can use the same function to check any day or range of days).
-
Hello
In Data mining when I tried to insert some values into the parameter array. I get the error by trying to introduce TREE_TERM_MINPCT_MODE in the table.
The model who was on trial for create was decision tree.
BEGIN
INSERT INTO DT_CA_SETTINGS_TEST (SETTING_NAME, SETTING_VALUE) VALUES
(dbms_data_mining. TREE_TERM_MINPCT_MODE, to_char (1));
END;
Error report:
ORA-06550: line 3, column 22:
PLS-00302: component 'TREE_TERM_MINPCT_MODE' must be declared.
ORA-06550: line 3, column 22:
PL/SQL: ORA-00984: column not allowed here
ORA-06550: line 2, column 4:
PL/SQL: SQL statement ignored
06550 00000 - "line %s, column % s:\n%s".
* Cause: Usually a PL/SQL compilation error.
* Action:
Thank you
Srikanth.Hello
BEGIN
INSERT INTO DT_CA_SETTINGS_TEST (SETTING_NAME, SETTING_VALUE) VALUES
(dbms_data_mining. TREE_TERM_MINPCT_NŒUD,to_char (1));
END;
This isn't 'Mode' his 'NŒUD '.
Run now.
See you soon...
-
How to write the condition with the value of the parameter
Hello
I'm working on siebel BI publisher report. I am able to display the value of the parameter in the report.
Now, I wanted to do something logical based on the value of the parameter.
for example: If the user changes the value of the parameter then I have to call A submodel if user don't past not any value then it should not display A submodel
can someone tell me how to write that above logic?
If the parameter exists then MODEL of APPEAL one another do not call MODEL A
Kind regards
JAG
Dial a submodel
-
Display of a user name, but the sending in the value of the parameter username
Hello
I have a parameter named User and I need the column of user names from the drop-down list, but I need to send the value of username corrsponding to my settings. Please let me know if there is a way for this publisher of BI in.
Thank you
DYWhen you create a list of values for the parameter, your sql should have two columns in the select statement:
Select user_name as name, user_id ID
from table_nameName appears but user_id is returned. -Change the sql as required.
Create the User_ID parameter (let's say it's ID), then use the created list.
In your datamodel, you can filter by User_ID as: select * from table where user_id =: User_ID
Hope that helps.
Bipuser -
Getting the value of the parameter
Hello
I use Reports6i.
I have a parameterized report, say the parameter: P_nat, have the list of values as
The values are asSelect nat_code,nat_name from Nationality_Master;
in the query, I want the values like IND, PAK etc, so I take: P_nat.IND-Indian PAK- Pakisthani etc...
Report also I want to show the selected value of the parameter, but here, I want the values like Indian, Pakisthani etc... Take: P_nat gives only the code.
Is it possible to get the value?
Thank youHello
For a full description, create a user setting more (for ex: p_desc) and in the outbreak of the APRES-PARAMETRE-FORM reports, use the code below...SELECT nat_name INTO :p_desc FROM Nationality_Master WHERE nat_code = :p_nat;
and in the layout of your reports, use the P_DESC parameter to display the full description.
-Clément
-
Value of the session Variable does not get updates.
Hello
I have a Session variable, I am assigning it an initial value [3] during the loading of the page. But, during the drop value menu selection and the "submit" button hit, I update the value of the Session variable.
The update is unsuccessful and the session variable is preserved the initial value. Here's the code used to assign the value to the Session variable:
< ISdefined ("FORM.submit") cfif >
< cfset Session.numTasksDisplayed EQ #FORM.filter # >
< cfelse >
< cfset Session.numTasksDisplayed EQ 3 >
< / cfif >
When to use cfoutput after these instruction to check the value of the Session variable, its gives me the initial value of 3. Form.Filter is the value from the drop-down list menu option selected.
#FORM.filter # #Session.numTasksDisplayed # < cfoutput > < / cfoutput > < cfabort >
Any help is appreciated.
Thank you and best regards,
Vijayvijay77.First of all, you cannot use EQ with CFSET comparison operator. It should result in an error. If this is done on the bottom, there will be an error and nothing is set.
Also, are you sure that FORM. Offer exists during the validation of the form?
-Fernis
-
Passing DB values to the text based on the Select Value box
Hello
I'm very big thing back to the Oracle APEX. In my project, I have a requirement in which I need to pass different values for the corresponding text boxes on a different page based on the value I select in the item "Select Value".
I tried using processes calling for demand, but could not get the desired result.
Please suggest!Hello
Can you repeat your scenario on apex.oracle.com? It will be easier to fix it this way.
Kind regards
-
UDI-00014: invalid value for the parameter, "remap_tablespace".
Hi all
Windows 2003 Server
Oracle 10g
I'm doing a reorg, so I droped and recreated the schema. No w I want to import my datapump schema export, but it gives me an error:
UDI-00014: invalid value for the parameter, "remap_tablespace".
Here is my script:
Impdp patterns of name of user and password = siebel directory = dpdir dumpfile = logfile schema_exp.dmp = schema_imp.log remap_tablespace = SBL_DATA:SBL_DATA, SBL_INDEX:SBL_INDEX State 60
What I'm doing wrong, it makes me crazy, please help
Published by: user11211037 on December 6, 2009 00:54Syntax and Description
SCHEMAS = schema_name [,...]
If you have the IMP_FULL_DATABASE role, you can use this parameter to perform a schema mode import by specifying one single schema other than your own or a list of schemas to import. First, schemas were created (if they do not already exist), including the system and the role of subsidies, the history of password and so on. Then all the objects contained in the imported patterns. Unprivileged users can only specify their own schemas. In this case, no information about the schema definition is imported, only the objects it contains.
Hope you are clear.
Concerning
Asif Kabir-Mark your answer as correct/useful.
-
Need to display negative amounts, amounts positive based on the value of the parameter.
Hi all
I have a requirement in rdf as follows:
I have two or three lines of the SELECT statement. An amount column having both negative and and postivie values.
Based on the value of the parameter I need to take these records.
Say, if the value of the parameter = "Credit amount", then I have to choose the records, the amount column value is negative.
If the value of the parameter = "Debit amounts" then I have to choose the records, which the column value is positive.
If the parameter Value = "All", then I must take all records, including both positive and negative.
Please suggest how to achieve this scenario.
Thank you
AbdulIn your where clause to add the following
and ((& paramètre = "Débit" et montant > 0) or)
(& parameter = 'Crédit' and the amount<0)>0)>
(& parameter = 'All'))Hope that answers your question
Sandeep Gandhi
Independent consultant
513-325-9026.
Maybe you are looking for
-
Pavilion 11 x 2 PC convertible - display waking from sleep
Brand new Pavilion 11 x 2 PC - model # 11 - h010ca Out of the box, it was loaded with Windows 8. I did the Windows 8.1 update. After the Windows 8.1 update, screen brightness cannot be adjusted, but waking up from his sleep was very well. I downloade
-
Selection of a MIDI-controlled effect opens "Classic Electric Piano"
When I add a software Instrument track and select a MIDI-controlled effect on the menu drop-down: What I get is a "classic Electric Piano: parameter Any suggestions what might be the problem?
-
Hello I neither usb-6008 card driver installed nor-DAQmx device name 9.3.5, software is autamatically "Dev1", how can we I read the name of the other device automatically: for example, I need to connect new or usb-6009 and in my program I find this n
-
Support of aid which is included in my application was implemented using Visual Basic 6 and Version of HTML Help Workshop 4 (?). When the installer is run on Windows XP systems, the copy of the hhctrl.ocx file triggers an error message and the copy o
-
Need to design for hp computer hard drive mini 110
Hello I took my hp mini 110-3518cl itself today and they told me my disk was not hard and needs to be replaced. What type of hard drive do I buy? I tried already to the diagnostic system, but was unable to find information on hard disks. Product: XZ1