passing variables between CFSCRIPT and Javacript

Similar Questions

• Passing variables between LabVIEW and TestStand

  Hello

  I'm just learning how to use TestStand and although there are a multitude of resources available, I always find me at a loss on how to pass variables between TS and LV, leaving me to think that there is one fundamental thing that I'm missing which is likely, given that I have a weeks experience with LabVIEW and a days of experience with TestStand.

  I took a glance to the example of 'Clusters' to the Code Modules in TestStand examples (I use TS 2016 if it matters) because I thought it would be quite ideal for what I hope. In this case, I hope to be able to pass a string (a file path) to LabVIEW and VI power take this string and use it as part of an order for the Exec.VI system.  Then, I would be able to pass strings back to TestStand to show the user if an error occurred, but I thought I should get the first part of work.

  I guess my question is what do I have to wait to see in clusters to the example of the Modules of Code? The Watch window displays all defined variables premise on which has the ContainerOut in the Variables pane, but I don't see any kind of update on facades (VI1.vi and VI2.vi) LabVIEW code. Should I be?

  I looked at a few other discussions of the forum here and here, as well as the document of the basis of knowledge here, but could not recreate their solutions. It seems that the connector pane would be a viable way to go, but I'm not sure on how we create and use effectively. According to this document , it makes it seem like it should be simple enough to makes these terminals, but I am still missing a key step. I was able to follow all the steps on the knowledge base document and run the sequence, but then had no idea if it worked or not; I have the report show me the values of the variables I put, but I have no idea whether or not he actually did anything with the LabVIEW VI, or how I could see that.

  Please let me know if you need further information or clarifaction everything I ask.

  Thank you for your time,
  JColvin

  Digilent, a company of National Instruments

  If you want to enter values, you must create a vi for instance dialog box

  

  

  The OK button will allow new values to pass to the output terminals.

  A Cancel button will pass just the original through the output values without alteration. The VI will close when either the OK button or cancel were pressed.

  Concerning

  Ray

• How to pass variables between Labview and Teststand

  It is probably a trivial question, but I'm new to TestStand. All I'm doing is updated to a variable in Labview and then pass this value in a local variable Teststand. A simple test that VI is attached. I get no error and it seems correct, but when I followed the variable via TS watch display is not updated. Also I am not able to read the variable outside TS. It is probably a trivial thing, I'm doing wrong, but I'm stuck.

  Too bad, it was simple. Just need to add the context of sequence as input, then set it to ThisContext TS

• passing variables between the pop-up windows

  I'm moving one popup to the other variables. It works fien if I spend bvariable of main application as soon as I'm moving from variable popup to popup window it does not work here is what I am trying ro:

  That works fine

  hand. MXML

  private function launchMoreInfo (): void {}
  var win: view = PopUpManager.createPopUp (this, opinion, true) as point of view;
  //
  
  victory. AccountNum = list1.selectedItem.accountNum;
  Win.User = user;

  }

  But if I try to pass variables to the pop-up window, created from popup component, is not ' work

  View.MXML

  private function dsclientevents (): void {}
  var win2:view = PopUpManager.createPopUp (Thi, dsclienteventlog, true) like point of view;
  //
  
  win2. AccountNum = 'test ';

  }

  AccountNum is declared in dsclienteventlog.mxml

  Is it possible to pass variables between the pop-up windows?

  I would much apreciate your help

  Thank you

  Hi friend!

  I have faced this kind of problem and solved using 'Public static var '.

  Just, you declare a public static variable in your class Popup. Then you can directly set the value to this variable as,

  ClassName.StaticVariableName = value;

  In your case,.

  say PopUp2.mxml or PopUp2.as

  =======

  In the PopUp1 script:

  OnItemSelectionChange (event): void

  {

  PopUp2.m_iSelectedID = DatagridID.selectedItem.AccountID; It will change the value of this variable, even if the popup2 is open.

  your stuff here...

  }

  Try this, I hope this will help you.

  Thank you

  Merlina.

• pass variables between form

  Hello
  
  I use oracle forms 6i.
  How can I pass variables between Forms?
  Consider the scénarion of a login form.
  Once a user logged in successfully, a new form is displayed, where his name is to be displayed
  like '< user > welcome. '
  If name must be past form at the home page login form.
  
  Is this possible with Oracle?
  
  Adkins

  Adkins,

  For Global Variables just assign a value to that, and it's initialization. Or you can use

  DEFAULT_VALUE(NULL, 'GLOBAL.');
  

  Make sure that you assign the appropriate value to the global variable before opening the new form.

  And for the parameter, try.

  DECLARE
       Pl_Id PARAMLIST;
  BEGIN
       Pl_Id := GET_PARAMETER_LIST('tempdata');
       IF NOT ID_NULL(Pl_Id) THEN
            DESTROY_PARAMETER_LIST(Pl_Id);
       END IF;
        Pl_Id := CREATE_PARAMETER_LIST('tempdata');
        ADD_PARAMETER(Pl_Id, '', TEXT_PARAMETER, '');
        Open_form('', ACTIVATE, SESSION, Pl_Id);
  END;
  

  Kind regards

  Manu.

  If my answer or the answer to another person has been useful or appropriate, please mark accordingly

  Published by: Manu. April 14, 2010 09:16

• Passing variables between Forms

  Hi, I am currently working on a rock, paper, scissors project in my class oracle. I was wondering if an oracle form to pass variables between them. I created a login form, and I would once a user logs on to change his user name to one opponent text fields username in the form of game. Is it possible and in this case you may be able to show me an example of passing variables between Forms? Thank you

  You can use the Globals for this purpose. I mean in your login form when your will enter its correct information then and it press OK to the newspaper by so you can for example store their username in the GLOBAL variable

  :GLOBAL.USERNAME:=:FORM.FIELD_NAME;
  

  This global variable, you can access a form any of the current session.

  -Clément

• bbUI.js - passing variables between screens

  Hello

  I tried something using the framework bbUI.js and it seems to be pretty easy to use if it becomes more stable in future releases. But I could not find a way to set some global variables between screen-change (push and pop/back). Is it possible to define some vars on the bbUI init and use them on a screen to change the values and also back on the same screen to read values?

  Concerning

  Hello!

  Please search the forums before posting

  http://supportforums.BlackBerry.com/T5/Web-and-WebWorks-development/how-to-pass-params-to-the-next-s...

  See you soon

• pass variables between classes

  Hello! I'm new to flash actionscript and I make a small game right now. I thought to create separate movieclips for each level of play and their assigned separate classes is cleaner and easier to code.

  for example: -.

  level 1 - level1.as

  level 2 - level2.as

  Level3 - level3.as

  My problem is how to pass variables (such as health, score, etc.) to a higher level?

  Please help I'm stuck on this and I have searched a lot but couldn't get the right answer...

  Oh, and I use cs3 flash with actionscript 3.0

  I don't think you really understand what are classes and movieclips.

  MovieClips are display objects; your character, the enemy, elements, platforms< these="" will="" be="">

  Classes can be used to define new elements or extend those which already exist, such as an object or a MovieClip.

  For the purposes of making a game, I would separate levels of executives.

  do level 1 on a frame labeled "level 1".

  and level 2 on a frame labeled "level 2".

  variables will carry an image to the image.

  Use gotoAndStop (frame_label) to switch between levels

  * Make sure you use stop(); on the first image to prevent bike between the frames.

  * You can make the frames between each level that has the code "gotoAndStop(previous level)" to prevent people to hit 'play' on the swf file and the cycling through your levels.

  You can also search for SharedObjects as a method of storage of variables even after that the swf file is closed.

• Connect the large number of parameters and variables between Verstand and model of Labview

  We have an installer of dyno with a chassis PXI-E running Veristand 2014 and 2014, inertia. In order to strengthen the capabilities and timing of the Veristand, I would use models of Labview to perform tasks is not possible by Veristand and inertia. An example of this is to determine the maximum amount of a large number of thermocouples. VeriStand has a comparison function, but it compares two values at once. This makes long and rigid emissions. LabVIEW, on the other hand, has a function which words one to get the maximum items in a table in one step. I need to use Labview to 'send' the thermocouples of 50 or more to the Labview model. In addition to the variables that must be communicated between Veristand and Labview, I also need to present Labview with the threshold and setting parameters. Forums and user manuaIs understand that you must use the connector pane in Labview Veristand System Explorer mapping to expose the inports and isolated villages. The problem is that the part of Labview connector is limited to 27 I/O. How to overcome this limitation?

  BTW. I'm relatively new to Labview and Versitand.

  Thank you.

  Richard

  You can work around this limitation by putting your orders and clusters indicators. Then set the cluster to be required or recommended to indicate whether contained controls are entered or parameters, just normal.

  

• OOP - how to pass variables between the branches of the object, but not instances of VI

  I have a main VI where a thread object goes through some subVIs initialization and then branches off into several parallel loops. My understanding is that each branch becomes a separate instance of the object. Data is passed between the loops using global variables, wrapped in the accessors (I can change this if someone has a better approach - reducing to a minimum the memory and the CPU usage is very important).

  I need to have a large number of instances of the main VI running at the same time. What would be the best way to ensure that the data transmitted between the loops of one instance of VI do not interfere with the data transmitted between the loops of another instance of VI?

  Thank you for your understanding.

  Ah, you're right. Stupid mistake on my part. It's all working now. The corrected code is attached.

• How can I pass variables between the areas?

  So I have a SWF8 file as a player on one area (unsecured).  It loads and plays a SWF8 from another domain (secure).  So far so good.  Problem is, I need the player to send variables to files it's play that links in this SWF will be, in addition, a link.  I also need the player to receive orders from control of film in return.  There must be a rule or two that I am violating, because even if the file is read, everything depends on a variable is just dead.

  A note: the two files started as SWF6.  I understand that I can only make what I'm trying with SWF8, I went into the code and fixed case sensitive issues and made the conversion.

  Can I do this?  If so, how?  Is the script for the variables from another domain different somehow?

  Thanks in advance.

  You can use localconnection() for communication between the two.

  If sovereign wealth funds need to both send and receive data, using 2 instances of localconnection in each swf file.

• Passing variables between classes

  I think I'm doing this more difficult than it really is. I would like to pass a variable of a class to another, once a file has been loaded. Currently I have a ListLoader that querys a PHP/mySQL which returns the XML of the class. I would like to create another class that processes this XML but I don't know how he pass only after it is loaded. It's getter/setter methods, or am I missing something really simple (or something else entirely)?
  
  Here are the two classes, with that I fight.
  
  

  Because the ListLoader makes the loading and the panels there appear, the panels need to know when the XML is available. If the panels accessed the magazine to the list, they either need to keep control if their XML is loaded, or subscribe to the magazine as a listener. It is better for the charger inform services' (the signs) when to use the XML.

  Better yet, if signs are essentially "views", take the treatment on the XML panels and give him the charger, then pass the XML transformed like a string or an object, or whether you need. In this way, the charger is the 'supply' and not the display panel, and the two don't get merged.

  The next step is to put in another class - essentially a data model that stores everything that has need of a Panel, so you might have different versions of panels, all you have access to the same data model. This class would then become the "model", and the Panel becomes the "viewer". (do a search for 'model view controller' - it's a basic OOP structure that goes a long way to help you think about OBJECT oriented programming, even if you do do not match exactly).

• How to pass variables between scripts in OpenScript

  I have a script that calls two nested scripts. A single script creates an account number and the other script uses this account number.
  
  MainScript:
  RunScript: Script1-> 'account number '.
  RunScript: Script2 <-"account number".
  
  What would be the most effective way to pass a variable to the main script to the secondary ones. OpenScript there overall (or maybe environment) variable I could use?

  Hello

  You're right OpenScript variable will be visible from any script, note however that you will not see them in the list of proxy using the user interface, you need to change the name of the parameter and use the syntax of variables * {{nomvar}} * in any script.

  Concerning

  Alex

• How can I pass data between DIAdem and LabVIEW?

  Hello community,

  in fact I use a LabVIEW application to control a test system, collect data and store it in a file.

  DIAdem is executed (using ITOCommand) and then create a report (PDF).

  This works already.

  But also, I would like to receive a return value of tiara, a real number, as for example the register R1.

  No idea how can be achieved?

  Thank you!

  Espelkamper

  Declare records, variables in the script of tiara that store the calculated result. Read records in labview

• Variable between TestStand and Labview

  Hi all

  I'm looking to get a tutorial giving an example of use of TestStand Toolbox in Labview to communicate with TestStand.

  I'm just new to that sort of programming and even after having made the tutorial OR "in aid of TestStand.pdf', I don't how can exchange data.

  Thank you

  Vincent

  Hello

  In the pane adapter module, you must file a local TestSTand variable (or expression) in the colum value. Uncheck the box to check by default and remove attributes and it should work perfectly.

  Kind regards