password lost, unable to connect to Windows

Similar Questions

• problem of bluetooth of Windows 8. Phone paired but unable to connect, says Windows phone in offline mode

  Problem of bluetooth of Windows 8. Phone paired but unable to connect, says Windows phone in offline mode

  Somasundaram Mohammed. Thank you for your help and maybe you will pass on the solution to all those in need. All that is necessary is to download Bluetooth Stack Toshiba 9.10 and run it. However be careful because version 9.0 of battery is not compatible. I have now my two Android phones connected.

  Thanks again

  John harney

• I lost my administrator password and you cannot connect to windows 7 - any help on each change or recover the password?

  How to recover the password lost for windows 7?

  How to recover the password lost for windows 7?

  While your application may very well be authentic, it could also be interpreted as a surreptitious attempt to bypass Windows security.

  The only recommended method to retrieve an administrative password is to login as another administrator account and reset the password to a known unknown. If the administrative passwords could be easily overcome, there would not be much point in them.

  It is in the terms of use and the Code of conduct of the responses of these forums to request or provide assistance to the cracking a password. Do not forget that you agreed to these and review if necessary.

  You can view the policy of Microsoft about lost or forgotten passwords (KB189126) for more information on what resources are available to you.

  The only advice I can offer you is either log - on another user with administrator privileges and reset your password to a new, use the password reset disk that you created when you set up your account, start guessing what the password could possibly be or reinstall Windows by default.

• Unable to connect from windows

  Here is a brief information on my config.

  I am running Oracle RAC on a node two. The two nodes are hosted on Oracle VM

  The system is 11 GR 2... Linux is Oracle 5 version 7

  Scan name isn't on the DNS, but a single entry in the host file

  the nodes are on the rise and work.

  crsctl res stat - give me the correct information.

  If I use the following

  tnsping rac of node1 and node2 windows command line it works

  I also entered the ip address of the rac-scan (scan name) the hosts file in windows that is in

  / Windows/system32/drivers/etc

  I am able to ping scan cars and it is the sponsor of the correct ip address

  I also installed the full version of the Oracle Client software on windows 7 and a free version of TOAD and also SQL Developer on Windows 7

  If I change the tns entry in the tnsnames.ora file on windows (win 7) and change this host name it works fine

  However if I change the entry to rac-scan, it does not

  Does not work - this involves the following

  Ping rac-scan (WORK)

  tnsping rac (work)

  sqlplus system / < password > @rac... How does not work

  If I replace rac-scan in the tnsnames.ora in the local machine (client - win 7)

  with rac31 (my host name) then only I am able to connect to sqlplus

  Hello

  You have an active firewall? If so, then try disabling the same and see if you are still unable to connect through scanning

  Also, what is the error you get when connecting via scan?

  Make sure that the next parameter is set to analyse:

  display the parameter remote_listener

  The above command should appear as follows

  SQL > show parameter remote_listener

  VALUE OF TYPE NAME

  ------------------------------------ ----------- ------------------------------

  remote_listener string rac-scan: 1521

  Kind regards

  Vautrin - Oracle

• Unable to connect on WIndows (Windows 7 Home Premium 64-bit)

  I have HP desk top (bought 3 years ago) with Windows 7 Home Premium.  Today, after the regular windows updates, my PC has rebooted and showed me to the login to the accounts screen 2 user (both are protected by Word).

  When I clicked on any of these accounts, he was asked to enter the password and tried to connect.  But he couldn't and showed me back to 2 accounts login screen user.

  I rebooted my system several times, but the situation is the same.

  Please help me solve this.

  Thank you best regards &,.

  Ludovic pokora

  Hi Ludovic,.

  Thanks for posting your query in Microsoft Community.

  We apologize for the inconvenience caused due to updates.

  I suggest that you want to run auto repair with installation media and see if it helps you repair system files or not. For the execution of the task, I suggest you to try the steps below and see if it helps.

  Method 1: When you use the recovery environment (Windows RE) to troubleshoot startup issues, first try the Startup Repair option in the System Recovery Options dialog box. If this does not resolve the problem, or if you have additional problems manually, use the Bootrec.exe tool.

  Because you cannot start the computer, you may need to create a bootable Windows installation media, and then do an auto repair, and if this does not help then you try to restore your computer to the previous date.

  Note: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  If you are using Windows 7 then the link provided below might help you to download and create installation media.

  Download Windows 7 Disk Images (ISO files)

  Method 2: If the problem persists, try to rebuild the BCD by using the Bootrec.exe tool. To run the Bootrec.exe tool, you must start Windows recovery environment (Windows RE) . To do this, follow these steps:

  1. Place the Windows 7 installation disc in the disc drive, and then start the computer.
  2. Press a key when you are prompted. Select a language, a time, a currency, a keyboard or an input method, and then click Next.
  3. Click repair your computer.
  4. Click the operating system you want to repair, and then click Next.
  5. In the System Recovery Options dialog box, click command prompt.
  6. Type Bootrec.exe, and then press ENTER.

  See the following link for more information:

  How to use the Bootrec.exe tool in the Windows recovery environment to troubleshoot and repair startup issues in Windows

  http://support.Microsoft.com/kb/927392

  Method 3: If after performing the above steps, you are able to start the computer and access the desktop then try to Uninstall KB3097877 update if it is installed, and then reinstall it.

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

• XP Media Center - unable to connect to Windows Update MSE fails with the error Code: 0X80072EFE

  OS: Windows XP Media Center: SP3, P4 3.20 Ghz, 1 GB of memory IE V8 processor

  I currently have problems to connect to Windows Update. I can't connect to the site at all and is the "this page cannot be displayed" whenever I try to open it. I diagnose the network connection and he came back with no problems found. I can download & install Microsoft Security Essentials, but I get error 0x80072EFE when I try to update. Note: MSE seems to update on its own, but not via the update button. I reset IE8 by default as well as the windows firewall and the IP (Winsockfix.exe) stack

  I also ran several different viruses, malware and Trojan scanners and all are own return. (AVG, Norton Security scan, MSE. I tried to run the scan to Microsoft Live, but the page froze when I tried to download it. It seems that any Microsoft Security site is blocked for some reason any. A Hijack log is available if needed?

  I had some browser redirect issues (I suspect the Virus), but it was very random and seems to have settled down. The main problem now is to get the update in the system and the MSE.

  Thank you

  TMcC

  Problem solved!

  Trojan:DOS / main Alureon.A in the MBR on the hard drive. Start into the recovery console and run FixMBR. It has detected the MBR was not correct and re-written the record. Windows Update now working as the MSE to date.

  I will me BEDTIME!

  Thank you guys for the entries.

  Tom

• Unable to connect with Windows 10 WNDA4100!

  I just upgraded to Windows 10 about 2 days ago and as soon as I upgraded my network WNDA4100 adapter stop working. The LED lights is no longer when it is plugged. I went to the website NETGEAR and downloaded the latest firmware that says it's compatible with Windows 10. After I installed the firmware, I go to Device Manager and click Properties in the adapter and I get this error message:

  Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)

  {Unable to load device driver}
  HS device driver could not be loaded.
  Error status is 0 x %x

  I tried to run the installation of the firmware in 8 of windows compatibility mode that has been suggested by others, but it never ends installation. It does not lock to the top, but nothing ever happens. NETGEAR is not willing to help me a little bit because it is longer than 90 days, blah blah. If anyone has the same problem, I would be very happy to help. I am currently using a very long ethernet cord running from my living room. Really, I don't want to have to buy another card and with windows 10 being so new, idk this new adapter would work even.

  I just updated to Windows 10 and had a similar problem (driver works, but could not connect at 5 GHz). I dug through some forums and found problems similar to mine (and maybe yours?).

  This link has a great miracle possible reason as to why you are facing this problem.
  http://answers.Microsoft.com/en-us/Windows/Forum/windows8_1-hardware/wnda4100-loses-5GHz-after-81-up...
  

  If you don't want to read through it, I will quote the details here:

• How to remove used passwords previously used to connect to Windows 8 of my computer's memory

  Can you please tell me how to remove the memory of my computer, I already used to log-in to Windows 8 that I would use again and the computer says I can't use old passwords password.

  With our thanks

  Hello

  Thank you for keeping us posted and I apologize for the delay in responding to you.

  If it's a live account, so I'd like you to click on this link and reset the password to the original.

  https://account.live.com/ResetPassword.aspx

  Once this is done, try and connection return to the computer by using the Microsoft Account.

  Note: Make sure that you have a stable internet connection.

  Back to us for any issues related to Windows in the future. We will be happy to help you.

• Question which relates to passwords on email and connection of Windows 8

  I don't want a password to connect to my e-mail and win8 to my laptop. How can I change one and not the other?

  You have a few options.

  1. Option #1. You can choose your Windows login to be a 4-digit PIN (similar to the way you have your cell phone unlock code).  If you want to do this, go to PC settings > accounts > Sign-in options.
  2. The #2. option You can disconnect your computer from your online account (so your Windows login becomes 'local' to how Windows 7 and before all used).  To do this, go to PC settings > accounts and then click 'disconnect' at the top.

     Note that you will be no longer able to use the App Store or connected applications like "Mail" touch-friendly application.  But if you were satisfied with Windows 7, this is probably not a concern for you.  You can still get all versions of Windows 7 programs (Mail, Photo Gallery, etc.) as part of the Windows Essentials Package and use as just before Windows 8 came.

  3. Option #3.  You can set Windows to auto login for you, so you never have to type any password/PIN at all.  Details on it here: http://cmdrkeene.com/auto-login-to-windows

• Unable to connect to Windows Update

  My desktop shows bar there are updates that must be installed, but I can't click the updates icon to start and it will not refresh automatically.

  I tried to go to the Windows Update Web site, but the website gets an error that IE cannot connect on the site (all other sites work fine).

  I'm on Windows XP SP3

  Thank you.

  0x80072efd ERROR_INTERNET_CANNOT_CONNECT connection to the server has failed.

  The most likely cause of the failure of the connection is also a resident malware, specifically, a horse of Trojan Agent2.BMYL. Apparently, AVG was not adequately protecting the system.
  You are using Internet Explorer, to see if the system can be analyzed here - Scanner of Protection Windows OneCare
  You can see that the malware also prevents OneCare Protection scan.

  If that's the case then you can try download, installation, update and scan withMalwarebytes Anti-malware (MBAM).
  Click on the button download the free version and Save MBAM.
  Suggest you start the system using the safe mode with networking, and then install and update MBAM -a description of the options course in Windows XP Startup Mode
  If it will not initially install, rename MBAM anything you care to and see if doing malware.

  If MBAM installs and updates, suggest you first do a quick scan of the system. When the scan is complete, you will be presented with a list of detected objects.
  If make sure that all the boxes are checked, and then click the Remove selected button. Restart the system if MBAM informs you that some objects may not be removed until the system has been restarted.

  Reboot the system to normal Windows mode and see if it can be updated now.
  IF it still can not, restart in SafeMode once more and do a full system analysis with MBAM.

  MowGreen Services update - consumer safety

• Unable to connect to Windows

  Just recently, I loaded Norton Antivirus.  After a sweep a reboot should resolve completely all the threats.  After the reboot, the first screen that appears is a Windows Log in screen I've ever used before.  I don't have a username or password.  Where am I supposed to get the usernames and passwords for something that I've never used it before.  Is it possible to go beyond this screen, so I can use my computer?  I am writing from a different computer that mine is not accessible.

  Try just pressing on enter on the login screen, the username will probably be there already, and maybe there is not a password.  If you can't get yet, you'll have to find anyone who installed windows on the machine and ask them what they put as username and password was most likely created during installation.

• Unable to connect a Windows Vista system to the wireless network.

  Hi my friend has vista on her laptop

  Hi my friend has vista on her computer hp laptop and try to connect to wireless, the router is the work that we already have a toshiba windows 7 and a computer hooked apple laptop but cannot get his hook up which can make? On a side note, the only way I could hang up was to disable the security on my router, but it's only one thing soberly.

  Hi my friend has vista on her computer hp laptop and try to connect to wireless, the router is the work that we already have a toshiba windows 7 and a computer hooked apple laptop but cannot get his hook up which can make? On a side note, the only way I could hang up was to disable the security on my router, but it's only one thing soberly.

  The methods and capabilities to connect wireless depend more material especially involved and software/drivers for the said material.  I could suggest your friend update that make drivers for hardware devices for their particular & model of wireless device and see if that helps to connect to your network.

• Unable to connect using Windows 7, Atheros and Linksys WRT300N wireless network adapter

  I recently bought 2 new laptops Acer running Windows 7. Each has an Atheros AR5B93 Wireless Network adapt installed.  In trying to establish a connection with a Linksys WRT300N wireless, I get an error saying that it was impossible to establish the connection.  Other computers on the wireless connection and the two machines work Windows 7 connects via Ethernet.  Please help solve.  Thank you.

  Hello

  If you have 3rd party security meet try to uninstall it and clean the system out of its residual process.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Primary DNS server lost, unable to connect to the internet

  I use an internet stick prepaid at home, even though on my screen, it showed that I had the internet connection that I could not connect to the internet than problem solver was told that he could not find the MAIN DNS SERVER?

  Hi Gregory,

   
   
  1. What is the brand and model of your internet USB Stick?
  2 have you made changes to your computer recently?
  3. you receive an error message?
   
  I suggest you to follow the steps and check if it helps.
   
   
  Method 1: Follow the link and check if that helps.
  How to troubleshoot network connectivity problems in Internet Explorer
   
   
  Method 2: Reset the sock of TCP/IP and check if this may help.
  How to reset the Protocol Internet (TCP/IP)
   
   
  Note: This link is applicable for Windows 7.

• Unable to connect to Windows error app store "could not be installed.

  * Original title: problem of Windows 8 Store

  I have Windows 8 in my pc. The app store windows works and showing all the tools and applications available. But when I click to install it, it displays a message on the top right of the screen indicating this-"XYZ could not be installed. On checking the details, it shows that "you are not connected to internet" while I'm.

  I installed all windows updates, there is no firewall does not block the store and I use a proxy server connection to connect to the internet. Many of my friends using the same proxy server access and use the windows store. Also I can't update Windows 8.1 that the store does not work. Please address the issue.

  Hi Shubham,

  I would like to inform you that the proxy server is not recommended to access the app Store of Windows because it does not work, disable proxy server try the following methods and then try to connect to the Windows store.

  Method 1: Disable the Proxy Server.

  1. open Internet Explorer.

  2. click on the gear in the top right of the Internet Explorer icon.

  3. click on Internet Options.

  4. now click on the Connections tab and click LAN settings.

  5. clear the use a proxy server for your LAN box.

  6. now try to connect to the Windows store and see if it works.

  Method 2: If the steps above has not resolved the problem, I suggest you to refer to the article below and perform troubleshooting.

  Why can't find or install the application on the Windows Store?
  http://Windows.Microsoft.com/en-CA/Windows-8/why-find-install-app-Windows-store

   
  The use of proxies authenticated with Windows 8

  http://support.Microsoft.com/kb/2778122/en-us

  Additional information:

  If no help to the steps above, please refer to the procedure described in the article below to re-register the App Store.

  http://blogs.msdn.com/b/notime/archive/2013/10/18/fix-store-app-in-Windows-8-1.aspx
  Hope this information can help, just reply to the State of the question for any other help.