password problem double macOS Sierra

Similar Questions

• Problems with macOS Sierra?  This fix can help you.

  Hello world.

  I wanted to post a solution that I have developed due to some erratic behaviors that I lived with macOS Sierra (no sound, slow don't boot, sluggish performance,... etc.).  This problem all my problems:

  1. After the upgrade to Sierra, restart your system and reset the memory NVRAM and SMC
     1. Reset NVRAM - How to reset the NVRAM on your Mac - Apple Support
     2. Reset the SMC - reset the management system (SCM) controller on your Mac - Apple Support
  2. Start normally
  3. Restart
  4. Start in Recovery Mode (command + R) - on the recovery of OS X - Apple support
     1. Launch disk utility
        1. Click on your disk (should be above Macintosh HD)... .click on first aid and allowed to run
        2. Click on Macintosh HD... .click on first aid and allowed to run
        3. Quit the disk utility
     2. Launch of reinstall macOS and complete reinstall.  Be very patient.
  5. After reinstalling:
     1. Restart
     2. Reset the NVRAM new - How to reset the NVRAM on your Mac - Apple Support
     3. Reset the SMC again - reset the management system (SCM) controller on your Mac - Apple Support
     4. Start normally
     5. Restart
     6. Boot into Recovery Mode, once again (command + R) - On OS X Recovery - Apple Support
        1. Launch disk utility
           1. Click on your disk (should be above Macintosh HD)... .click on first aid and allowed to run
           2. Click on Macintosh HD... .click on first aid and allowed to run
           3. Quit the disk utility
        2. Exit the Recovery Mode and start normally

  Happy to help you with this,

  BrainSel

  I did disk first aid and tonight, tried to do a reinstall in Recovery Mode. I went into Recovery Mode, but nothing after that I said to reinstall Sierra (in fact he said that he would check if I was eligible, then I hit Continue, and nothing's happened over an hour when I left).  I also downloaded from the App Store, reinstalled Sierra and have exactly the same problems. But I'll try fortunately once again in a day or two after your specific guidelines, and it would be nice if it worked.  (I had all of your problems. Mine were the window of the mail attachment issues (opens and closes quickly or opens but not completely, so I can not upwards), network goes offline after I wake the computer from sleep, sleep sometimes takes three tests since the first time I try to sleep, he wakes up immediately.  But I'll give it a try and thanks to you and khati for the info.

• update problems since macOS Sierra to iMovie

  Hi everyone, I hope someone can help me out here because I'm starting to get really frustrated.

  I have a MacBook Pro and yesterday I upgraded to macOS Sierra and I regret it now because when I wanted to work with iMovie today he is more worked how it used to. I make youTube videos for a living and I'm already a day behind my schedule download because of this problem. Basically what is happening, it's only when I imported my video files to my SD card into iMovie files seemed normal, however when I put them in a project and began to play them I noticed that the color was distant, it almost looks like there is a misty overlay. At first I thought that maybe my DSLR camera has broken out and checked the files on the SD card (played files to QuickTime) but they seem quite normal and how they should look, iMovie for a reason any turns them... I have no idea how to solve this problem, because I'm not even sure what really is the problem. Can someone help me please?

  Hi, Anny,

  I don't know what is happening with the change of color in your timeline.   Whenever there is an upgrade of the operating system there always is the possibility of conflicts with specific applications until the bugs have been worked.  So, it is possible that your question is related to your recent update to OS Sierra - hard to say.  I'm not aware of anyone who still displays with your problem.

  Given that the problem appears only in your timeline, maybe media are complex and your computer is hard to deal with in the time line or keep in touch with your editing.

  You can see if the problem is linked project by creating a new project with the same or different media.   Is it possible to have a color filter activated inadvertently?  You can also try to reopen iMovie while maintaining the option and command keys and selecting Remove preferences.  Sometimes, it allows to launch iMovie in a different account, as your guest account, in which case there is a conflict with your current user account.  If none of the works above, you can try to create a new library on your boot drive or disk formatted Apple iMovie and see if your projects are working properly.   Another possibility is to restore your old operating system from Time Machine.

  In any case, I think that once the film is shared out he will play with his normal colors.  Try sharing file on your desktop to confirm that.   If he plays well, at least you'll be able to keep your schedule download then you want to solve your problem.

  Best,

  Rich

• Graphics problems in macOS Sierra on Macbook Pro

  I have a 13 "mid-2016 Macbook Pro (model MacbookPro 7.1 - 2.66 GHz/8 GB RAM) I've recently upgraded to Sierra. However, I noticed a slight increase in glitches since the upgrade - serious glitches. For example, the animation for arise Applications appears as two images, the majority of applications (including integrated) sparkle and on top of that, applications like Microsoft Remote Desktop and Parallels Pro 12 do not work right due to graphic problems (MS RD comes constantly creates an empty black window while in the analogies I was forced to power off the virtual machine dirty because all the options of the application itself that uses OS x) interface were flickering at which makes them unselectable).

  In fact, the graphics flickering and stuttering throughout what using Mac OS are quite widespread. Open a new window in Chrome, same thing. Same thing with Safari. Or iTunes.

  He got better with each subsequent reboot, but it is still pretty bad.

  Anyone else having this problem or have a resolution for this?

  He got better with each subsequent reboot, but it is still pretty bad.

  Keep rebooting until the problem is gone.

• IMAP Yahoo problem with macOS Sierra

  Salvation and for reading.

  After having upgraded to Mac OS Sierra, I got the following surprises:

  All my IMAP from Yahoo email account are not synchronized more when stocks are made on my mac.

  IE: if I delete an email on my iPhone, it is deleted on the mac aswell. If I delete an email on my mac, this email remains on the iPhone as no action has been taken.

  Of course, it's a big problem because I get tons of emails that I proceeded normally on my mac.

  Any help please?

  Tnxs

  In fact, I noticed that this happens with gmail as well - and all accounts except iCloud, which works properly...

• On macOS Sierra - Parallels Desktop 12 - error unable to load Parallels driver - error ID 352

  I have updated at 10.12 some weeks ago, with no problems.

  I used 10 Parallels and put Windows 7 access every day. My Mac software was 100% up-to-date.

  After a few weeks, I started Windows and Parallels showed the error "Failed to load the driver" and KB Parallels, I found that I may need to upgrade. As I was planning to upgrade anyway, I upgraded to Parallels 12 and got the same error.

  I contacted Parallels support - they responded with this:

  Failed to load Parallels driver. Problem ID: 352

  Cause

  The problem is in the bundle /System/Library/Extensions/IOPCIFamily.kext from Apple. In the bundle's info.plist is damaged due to some reasons.

  Resolution

  If please contact Apple Support team and send them system.log and corrupt /System/Library/Extensions/IOPCIFamily.kext/Info.plist.

  The person wrote that if Apple can't help, we will try to help "."

  Is anyone able to help please?

  Thank you.

  It is a user to user forum, not a team of Apple Support forum. In any event, it sounds like a problem of Parallels as it is unlikely that multiple versions of the operating system have defective or damaged kernel extensions.

  For what it's worth, I use Parallels 11 without problem on macOS Sierra to access Windows 2000, Windows XP, Windows XP64, Windows 7 and Windows 10 of virtual machines. I think you should go back to parallels Support. I've avoided Parallels 12 because of all the problems users are reporting

• MacBook Pro mid-2012 running hot (MacOS Sierra)

  Hello

  I have a MBP mid-2012 13 inch with 16 GB. of ram and a 500 GB. SSD

  I had it set up with boot camp and dualboot El Capitan and MS-Windows-10

  Everything is working, all the features and functions in the two operating systems.

  I was very pleased with this MBP.

  Recently, I put a new battery in it and upgraded to Mac OS Sierra.

  Since then the MBP runs hot.

  It heats up very quickly.

  Is this a common problem with macOS Sierra?

  Or do you think that the NEW battery maybe causing the MBP get HOT?

  I use an adapter to power 85 watts OEM.

  The battery seems to work fine.

  Several demons as mdworker are running to set up the Sierra which CPU load until adjustment ended.

  You can check with activity monitor.

• MacBook Pro (15 inch, end 2013) with MacOS Sierra 10.12: kernel_task maxing out CPU with external display

  I have a maxed out end 2013 the MacBook Pro Core i7 to 2.6 GHz, 16 GB of DDR3 RAM, 1 TB SSD, NVIDIA GeForce GT 750 M 2048 MB, Intel Iris Pro 1536 MB.

  Also, I have a DELL P2415Q Display 24 inches (3840 x 2160) using Thunderbolt, are involved through the headphone jack and use a USB for lightning to recharge my iPhone.

  I upgraded to macOS Sierra the day he is released and had no problems until this morning. I unplugged my external screen and speakers and used my laptop for about 15 minutes, the battery, and then returned to my office and plugged my Thunderbolt, rear speakers display in and my CPU shot at 100% and never came back down. My Mac is essentially useless because kernel_task is eating all my CPU and to prevent another asks to enter the CPU.

  I have since audited equipment - everything was fine, reset the NVRAM and I tried to erase IOPlatformPluginFamily.kext .plist files but I couldn't on my Mac (trying to follow this guide, started in Safe Mode and everything then went to try and find the file and my Mac just does not have it). When my external screen is plugged if I'm doing anything CPU intensive (videophone, opening of Chrome, etc.) then my kernel_task gets mad again, and the only way to move is to unplug my screen. Connect my iPhone to charge the tips also my kernel_task as well. I followed my internal temperatures, and nothing was out of the ordinary, to cold currently at about 140 °.

  At this point, it seems that any time that puts something on the charging system and increase the temperature internal internal components of my Mac kernel_task maxes my CPU, which brings my Mac to its knees.

  Any ideas how to fix? Is this just a major bug in 10.12?

  Hi, Trent L.

  Try this - problems with macOS Sierra? This fix can help you.

  He got rid of all my macOS strangeness of the Sierra.

  Hope this helps,

  -BrainSel

• MacOS Sierra not properly to access the Keychain for OpenSSL/SSH passwords

  Hello

  It seems to be a problem in the Sierra of MacOS on the passwords for SSH keys.

  I have my public/private key pair that is enabled for access to some linux servers, so I can't SSH in without inserting my password. After upgrading to Mac OS sierra, it seems that the keychain is no more long-term treatment/store/retrieve passphrases correctly.

  When first tried to open a session in one of my remote servers, asked me for the password, which seemed odd, so I thought that maybe the passwords were lost in the upgrade and changed the password manually by calling "ssh-keygen - f id_rsa Pei." Then I went to log in again, I asked the password and he entered, so I could connect to the server but then, apart from SSH telling me it has stored the password in the keychain, subsequent attempts to connect again always ask me the password.

  debug1: Next authentication method: publickey
  debug1: Offering RSA public key: /Users/xxxxx/.ssh/id_rsa.pub
  debug3: send_pubkey_test
  debug3: send packet: type 50
  debug2: we sent a publickey packet, wait for reply
  debug3: receive packet: type 60
  debug1: Server accepts key: pkalg ssh-rsa blen 535
  debug2: input_userauth_pk_ok: fp SHA256:/xxxxxxxxx/GM
  debug3: sign_and_send_pubkey: RSA SHA256:/xxxxxxxx/GM
  debug3: Search for item with query: {
      acct = "/Users/xxxxx/.ssh/id_rsa.pub";
      agrp = "com.apple.ssh.passphrases";
      class = genp;
      labl = "SSH: /Users/xxxxx/.ssh/id_rsa.pub";
      nleg = 1;
      "r_Data" = 1;
      svce = OpenSSH;
  }
  debug2: Passphrase not found in the keychain. Enter passphrase for key '/Users/xxxxx/.ssh/id_rsa.pub': debug2: no passphrase given, try next key
  debug1: Offering RSA public key: /Users/xxxxx/.ssh/id_rsa
  debug3: send_pubkey_test
  ...
  debug2: storing passphrase in keychain debug3: Search for existing item with query: {
      acct = "/Users/xxxxx/.ssh/id_rsa";
      agrp = "com.apple.ssh.passphrases";
      class = genp;
      labl = "SSH: /Users/xxxxx/.ssh/id_rsa";
      nleg = 1;
      "r_Ref" = 1;
      svce = OpenSSH;
  }
  debug3: Item already exists in the keychain, updating. debug3: send packet: type 50
  debug3: receive packet: type 52
  debug1: Authentication succeeded (publickey).
  

  Note how he is unable to find the password in the keychain (it is out of the attempts of the second and following), then he says it stores the password in the keychain, and then, he considers it and "updated" it. However, next attempt will not find the password in the keychain, so that the process will be repeated "ad nauseam".

  We are not allowed to discuss beta of Mac OS in public forums.

  When you register, you gave instructions for reporating problems.

  Please find this information and use it, so that developers can solve any problems you encounter.

• Unable to Scan to the computer after downloading macOS Sierra. Is this a software problem?

  How can I scan from HP Envy 4500 to computer after downloading macOS Sierra?

  Hello wdemetris,

  Thanks for asking for scanning helps here in the Apple Support communities. I understand how it is important to have access to your scanner and am happy to offer help for this.

  As a precaution, we always recommend that you have backups to make sure that all your data is safe. You can perform a backup using Time Machine and an external hard drive. Use this article to help make a backup of your Mac: use Time Machine to back up or restore your Mac.

  Then, in accordance with article help: printer and scanner for Sierra, El Capitan, Yosemite, and the Mavericks macOS software, the HP Envy 4500 e-all-in-one is supported for printing and scanning. The drivers must be installed, but if not, if it please go to the App Store and check the updates tab to see if there are updates for HP. If there is, please install.

  If you have only general questions about how to get your updated scanner in place or how to scan pictures, please check out these two articles: macOS Sierra: implement a scanner & macOS Sierra: scan images or documents. If everything is configured correctly and you still have problems scanning, please visit this help article: macOS Sierra: scanning troubleshooting.

  Thanks again and have a great rest of your day.

• Problems with mail after switching to macOS Sierra

  Hey all

  After having recently upgraded to macOS Sierra, I am unable to read my mail.

  I get the following error every time I check on "Get Mail".

  There may be a problem with the mail server or the network. Check the account settings "*" or try again.

  The server returned the error: Mail could not connect to the server 'pop1.tribcsp.com' using SSL on the default ports. Verify that this server supports SSL and that your account settings are correct.

  What does this error message mean and how can I solve this problem.

  Thank you

  Hi Michael,

  I see your message that you get an error in the mail indicating that there is a problem with the mail server or the network.  To help get this problem resolved, I suggest that you follow the steps below:
  

  If mail refers to a problem with the mail server, or the network

  Mail will say that it is impossible to connect due to a problem with the mail server or the network. For example, the message may refer to a connection that has expired, or too many simultaneous connections:

  

  If you are connected to the Internet, but the connection has expired, your email provider might be affected by a discontinuance of service. Contact them or see their status Web page to ensure that their e-mail service is online. Examples of status pages:

  • iCloud mail status
  • Gmail status
  • Status of Yahoo mail
  • Status of the AOL mail
  • Status of Outlook e-mail

  If the message indicates the number of simultaneous connections, too many of your devices is check your e-mail account at the same time. Quit Mail on one or more of your other devices.

  If you are still unable to send or receive e-mails

  1. Make sure that you have installed latest version of the Mac software updates, especially if the problem occurred immediately after the installation of a previous update.
  2. In OS X El Capitan or later version, you can see a status icon and the short error message in the upper right of the Mail window, under the search box. The message may indicate 'Network offline' or 'Connection failed', for example. Click the message to see more details on the issue.
     
  3. Check your connection to the Mail connection doctor. It might be able to say more on the issue.

  If you cannot send or receive e-mail on your Mac.

  Take care.

• Selection of e-mail under macOS Sierra problems

  An old problem reappeared in the new MacOS Sierra... I can't select the emails by sender or subject in the native Mail application... someone knows the solution? I closed all applications, I rebooted the computer... nothing changed...

  Please describe in more detail what you mean by . I can't select more emails by sender or subject in the native Mail application.

  It is clear to me what you describe.

• Using the function of scan macOS Sierra HP Officejet 7300 series network printer does not work; He had no problem with El Capitan...

  Printer HP Officejet 7300 network series that allows to work flawlessly with El Capitan does not work after the upgrade to Sierra.

  With macOS Sierra, when used as a network print service printer works fine however scan does not work. Programs like the Image Capture, HP Easy Scan etc does not see the printer. However, if the printer is directly connected to the Macbook Pro using the usb cable, a new printer is added to the list of printers (it shows print and scan functions while the printer network in the list shows only printing function) and the scanner works well with Image Capture, etc. If the usb cable is removed disconnects this printer in the list and there is no way to turn it on. I have the latest update for the printer installed from the App store. It looks like a driver issue, but I wonder if there is a work around for this problem...

  Open Preview.app. Under file in the menu bar, you see import of 'name of your scanner?

• Language on macOS Sierra switch problem

  I just upgraded to macOS Sierra and I have a problem with switching languages.

  I have both English and Russian, but I just need to do the Cmd + space to more than an hour to change language and when I do, I can get the American icon in the status bar, but the language is passed to the Russia and vice versa.

  Any thoughts on how to solve this problem?

  Is this another discussion help:

  input source indicator does not

• MBP (2012) having huge problems since Os Sierra update.

  Hello!

  While I own this Macbook pro (mid-2012) which worked like a charm until yesterday.

  I've updated to Mac Os Sierra 10.12 yesterday and since then, I had several problems, here is what happens:

  First, I could not boot up the laptop. Kept opening to a black screen with cursor (which I could move), it would not really start something else.

  I found that all I had to do was to enter the first letter of my name of user online, press ENTER, my password and enter again (while watching the black screen). It worked!

  Now, my problem is that I can't turn off the power without forcing. When I press on the Apple logo and the "closed" press I get the same screen black with a cursor, while the unit simply refuses to close actually. The only way to do this is to press the power button manual for several seconds.

  Things I've tried (which were not successful):

  Looked online and I tried many:
  -Reset "PRAM",

  -Launch utility disk first aid,

  Went to the chat service apple customer and executed:

  -Reset of the SRAM "',

  -Launch the disk utility first aid.

  Has been disconnected when I reset SRAM so I had to contact them again and carried out:

  -Start in safe mode.

  I was told of safe mode might actually trigger the update to finish and solve the problem, but it would not.

  Also, I cried a little, sigh a lot more than I should have lost faith. Those who do not work either.

  So here I am, looking for help! What can I do?

  Thank you very much!

  PS: Sorry for the errors, my mother tongue is french!

  Hi Foggylemming,

  I understand that, despite a good bit of troubleshooting and anxiety, your Mac has always questions close normally, given that you have updated to macOS Sierra. Fortunately, however, there is always hope!

  While the next step should not affect your data, however, now would be a good time to create a backup of your Mac (if you haven't already done so) so that you can be sure that your data is safe. One way to do that is built into your Mac (but requires an external hard drive) is Time Machine.
  Use Time Machine to back up or restore your Mac - set up Time Machine

  https://support.Apple.com/en-us/HT201250

  The next step would be to start your Mac from the built-in recovery drive (after forcing them to close again if necessary). To do this, hold the command and R keys until you see the utility window appears. From there, follow the steps below.
  

  OS X can be installed on the same version or an earlier version of Mac OS X, without deleting your data. You don't need to remove or disable the existing system first.

  1. Start of OS X Recovery now command-r immediately after start-up or that you restart your Mac. Release the keys when you see the Apple logo. Start-up is finished when you see the OS X Utilities window.
  2. Choose to reinstall OS X OS X Utilities window, and then follow the instructions on the screen.
  3. This installs the latest version of Mac OS X, which has already been installed on your Mac.

  How to reinstall OS X
  https://support.Apple.com/en-us/HT204904

  Kind regards.