Password supervisor with Tecra S3
When you try to choose (with F12) a boot device different 1 hard drive (for example CD/DVD, USB, SD-Card key), the system starts the only construction-shaped hard drive. Trying to get into the BIOS (with ESC followed by F1), you can see just a tiny selection just in the 1st page of the BIOS.
All other information (e.g., priority/boot sequence) are not accessible. It is NOT defined a user password or a HARD drive password.
When you press the INSERT key before you turn on the laptop, it asks a supervisor password. Someone has obviously set it and I did. With the normal Toshiba Utilities (for example, "help") it is not possible to remove it, also the LPT-Port connector or the Boot disk (1 5 bytes of the 2nd amended sector) does not help.
What can solve this problem.
Thank you
Hey,.
First the supervisor password can only be removed from an official authorized service provider. T, you can remove yourself if you n t know.
In addition, the supervisor password is necessary to change some settings in the BIOS and it doesn t allow to boot from another device.
By the way: AFAIK ESC should allow access to the BIOS.
Here you can read:
[What is a BIOS supervisor password? | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=51]
Tags: Toshiba
Similar Questions
-
Qosmio X 500-reset of password supervisor HD
Hello
for some reason that I can't not find my supervisor password more and 3 attempts the laptop turns off and you can start all over again. I can set the HDD2 to HDD1 user password, so I am able to start windows, but I would like to remove all passwords from the hard drive.
1. is there a way to reset completely?
2 if I have the image of the hard drive to another, it copies the hard drive with her neck?Really, I don't know what I put as long as password supervisor... so any help is appreciated.
Concerning
EdBelgiumHello
Do you mean the HARD drive password or the supervisor password?
(1) the password disk HARD unknown cannot be deleted, and in this case, the HARD drive would be useless.
http://APS2.toshiba-tro.de/KB0/FAQ9401AR0000R01.htm
http://APS2.toshiba-tro.de/KB0/TSB6B01MC000CR01.htm(2) the supervisor password is NOT stored on the HARD drive. In this case the replacement of HARD drive won't help you. The unknown supervisor password can be removed by Toshiba service engineer only.
-
Need to remove the password on Toshiba Tecra A8 BIOS
Hello. Dear can Technical Support, you help me remove the password on Toshiba Tecra A8 BIOS?
Challenge Code = GH1PF-YLL2C-CKQVT-K2U75-JJF0K
You must send in a center of Service from Toshiba for password removal. There's no other way.
-
1 password works with version 6.0?
Before I have to download/install 6.0 I want to know if 1 password works with it. I am totally dependent on 1Password and will keep the v5 if necessary.
http://blog.agilebits.com/2011/08/the-new-1Password-extension-is-now-ready-for-Firefox-6/
-
No sound with Tecra A9 and Windows 7
Hello
I just installed Windows 7 on my Tecra A9 and now: no sound. I ' v installed all the latest drivers but nothing to do: no sound.
Does anyone have the same problem? And especially have solved?Thanks for your help.
PS: The mute off the coast of the working tools doesn't work with Tecra A9 (is there an update?)
Hello
> I've tried the mute off tool, but it is not compatible with Tecra A9
You need to install the VAP (Toshiba Value Package utility added) before using this tool!Check again!
-
Tecra M2 display is compatible with Tecra M5?
Hello
I have a Tecra M5 with a ladle monitor.
does anyone know if the monitor from an old M2 is compatible if I Exchange?Thanks in advance
Hello
To my knowledge the two models Tecra (M5 and M2) supports the 14.1 display.
The question is whether the cable screen M2 would be match with the M5 connectorsWell, it is not known to me but I think generally you likely would be compatible with Tecra M5 Tecra M2 display.
Greetings
-
Password entered with the fingerprints - HP protect tool/Password Manager
Hi all!
I use HP protect tools and Password Manager and password authentication Windows and fingerprint authentication. I have problems with fingerprint authentication.
When I try to enter the password automatically with the activation of the footprint of the password is not entered. The password is entered if I click on the Password Manager icon select fill in the data of logon and authentication with my Windows password. It never came with my fingerprint authentication (even if I get a green check mark on the icon so nect I drag my fingerprints).
I am administrator on my PC and have registered three fingers, I am trying to use for authentication. I'm really confused why Windows authentication, it works well, but the fingerprints does not have the password. I find no more errors that suggest the registration of fingerprints does not work.
I already used the password on another HP Manager but I never had this problem. The password has been entered always automatically when I spent my finger.
I use an EliteBook 8460p with Windows 7.
Looking forward to your help!
Kind regards
Pheoebe
This solved my problem!
-
Password Subvi with enter/return key control
Hi all, I am a self-taught user of LabVIEW. I hope that someone here can help me with this problem that's driving me crazy.
I'm doing a small password. Only by entering the correct password, a certain function is executed when running. My code was running without problem until I realized that by pressing the 'Return' key in the added password prompt a new line; as a result, the user is forced to use the OK button. I wanted to capture the return key so that it works as a "standard" password prompt
That's what makes me crazy: my code works perfectly if I single step it. If I run the code (CTRL + R) when I press 'Return' the password is not accepted. A probe tells me that the password is always empty in this case. If I use the OK button that everything works.
I've implemented my password Subvi with a small state machine, so that the OK button and the back button run to the same State. In the same way, I grab also ESC, to work as the button cancel, and works smoothly. I also use the feature to discard to abandon the return key so that my rope does not get a new unwanted additional line. I can't possibly think any race condition that can make my code only works when you browse it slowly, step by step.
I'm completely at a loss, and I hope that someone can help me! Thank you!
PS: I have included only the VI because the nature of the state machine I should post a bunch of screenshots. I can do it tomorrow if you need me.
Make a right click on the text field where you enter the password and select "update as you type"
Mike...
-
new to computer.put a password on my account don't you remember the password even with the owner of suspicion of computer im also the u only administor.thank
* original title - activate my password account.changed newspaper even cant account with suspicion am owner have only n *.
Hi Michelle,
You can read the following article and check.
Please see the following articles for more information:
Microsoft's strategy concerning lost or forgotten passwords
Keep secure passwords - Microsoft strategy on move the passwords
-
original title: administrator password
Verizon offer security update, but I need a password to accept. I don't remember password even with suspicion. How can I get a new password
If you're a Verizon with their helpdesk to get assistance with their password.
-
I bought a series of Forza Ups SL761. It came with a manual and I am trying to install it via the website and the system asks me the password. When I fill the password supplied with the manual there show me that the password is not correct. And I can't go any further.
Hi Henry,.
I suggest you to contact Forza Power Technology Support: http://www.forzaups.com/us/contacts/
You can also post this question in the Forza community: http://www.forzaups.com/us/blog/category/english/
Additional information.
Forza SL761 Ups series: http://www.forzaups.com/us/products/ups/sl-series/forza-smart-ups-sl-761110v#features
Thank you.
-
encryption method (password starting with 06)
Our company gave us a recommendation:
"Old DB link encrypted password: . Links the password of the Oracle databases are encrypted using THE (password starts with 05). This methord of encryption is known, and users can decrypt passwords using a simple SQL query. Please re-create the database links to use the new method of encryption (password starting with 06). »
What this means and how we can make this recommendation?
Hi Artem,
You can try to drop and recreate the database links after that make sure compatible parameter is set to the current
version and also this parameter sec_case_sensitive_logon = TRUE?
The old passwords version probably found with a sql like this:
Select name, host, username in sys.link$ where MAS as ' 05% ';
Greetings,
Damage ten Monkshood
-
After mainboard replace my HARD drive with password works on TECRA S11?
I hope that my local service center will replace my TECRA mainboard (later I'll tell why). Will my drive HARD with the password protection work and my files accessible encrypted fingerprints after a motherboard CPU replace?
Windows 7 Pro will start in after this 'upgrade' hand / replace?
(I have read the thread similar Tecra S5 topic, pls do not link which closed thread)Hello
Usually, the HARD drive password should work after the replacement of the motherboard.
The fact is that the HARD drive password is stored in a special area of the HARD drive and should not be an issue this motherboard has been replaced.I found this info in the knowledge base of Toshiba:
+ Password HDD TOSHIBA summary +.
http://APS2.toshiba-tro.de/KB0/TSB6B01MC000CR01.htm+ What is A HARD Word DRIVE? +
http://APS2.toshiba-tro.de/KB0/FAQ9202JG0000R01.htmI hope this helps!
-
How to set up the password for the supervisor on Tecra A4
Hello
I want to activate a password for bios we give access my tecra A4. (supervisor password)
But when I activate a password, it is for the start-up of the pc.
I want to warn the user base to reach the bios without activating a password at the start of the pc.
How can I do?
Thank you
Hello
If you want to set the password for the supervisor so you should do it in the utility supervisor password.
On my laptop, I found this utility in the assistance of Toshiba-> sure.
I presume that it s also on your A4.There, you can start the supervisor password tool. Here, you have to choose the option saved.
Please post if this works
-
Removal of password BIOS on Tecra M11 - 11 M
I have a Toshiba Tecra M11 - 11 M, which was blocked from password. I stripped the computer laptop and removed the BIOS during 10 min but the rest password battery still IE on the screen it still reads PASSWORD - *.
There is no way to get into the BIOS through a combination of keys.
There are no markings or letters on the motherboard whether ie: C35 - C36 or J12 - J13 out short which would in most cases to remove the password and allow access to the BIOS.The technicians out there with any ideas would be much appreciated.
Some people asking for help with a password of bios are not thieves but crazy just forgetful.As far as I know Toshiba uses several methods to remove BIOS password. On commercial machines like Tecra and Portege method is not the same as the Satellite models.
Remove battery BIOS works on desktop computers, but not on mobile machines.Mobile machinery must have better protection due to the fact that can be stolen easily and it is very important against a misuse.
> Some people asking for help with a password of bios are not thieves but crazy just forgetful.
S OK, but you can't wait this BIOS password removal method will be described on the public forum. Contact the nearest Toshiba service provider and they will do it for you. All you have to do is show an invoice validates and prove that you are the real owner of this Tecra machine.
Maybe you are looking for
-
About applescript syntax error
Code: my itermExec1() on itermExec1() say application iTerm2 Set newWindow to (create the window with the default 'yeongjun' value) end say end itermExec1 It is this script run the ' iterm 2'. (reference. ( https://iterm2.com/applescript.html) Why is
-
Code 57 Windows Update encountered an unknown error
I constantly receive the following error message when you try to install the Windows updated to filter junk e-mail in Microsoft Office Outlook 2007 (KB979895). "Code 57 Windows Update encountered an unknown error" Please send me an email to * address
-
I can't download the service pack 1 of windows vista.
Impossible to download service pack 1 for vista I can't download the service pack 1 of windows vista. I didn't bother with it so far because I now have a new router and I download to configure the router.
-
Received an error message "ActiveX runtime error '429' cannot create the object.
I got this error message after you install a site Web of Koyote Soft free audio converter. So now I'm unable to run/open this free audio converter. Help, please. Thank you
-
Complete security for the family by blocking programs after uninstall
Hello I tried to activate the control of application on my son's account to prevent it from playing games online before major exams. I activate the control application and checked the games'programs and only game programs.It appeared that she also bl