Pasted image does not appear when imported to HAVE it
Mac OS 10.4.11 - Acrobat CS4. I did an image contact sheet in Bridge that has been saved in PDF format. In Acrobat, I stuck another image (report of different sizes) and saved again. However, when I put the image in Illustrator the pasted image do not show, only the images of initial contact. It shows either at the level of the preview, but when the PDF file is opened, it is there. I tried to "flatten" but cannot find an option that works. See the attached file.
I leave that to the OP respond :), but I guess that Illustrator could be used to add captions and others.
Tags: Acrobat
Similar Questions
-
I have a picture on my slide and when I preview the slide is displayed correctly, when I hit F10 to get a glimpse of the next 5 sldies or publish the file that it is not. I imported audio on the slide not for an object. I wonder if this is important? Any help on this would be greatly appreciated.
Thank you...
Also check if the Visible checkbox was checked for this image on the Properties tab. If it is unchecked, check it.
-
report image does not appear when a certain background cordinate is exceeded
Hi all
I create reports of DIAdem using script functions. Since the update to tiara 2015 (I belive) there is a mistake that didn't happen before:
When I add a new Image to the State and lower coordinate is that below a certain value (~50...60) the image appears correctly. However if the lower coordinate exceeds this value the image will not be displayed (see the attached example script)
Thanks in advance
Christoph
Hi Christoph,
Properties of position change if changing the related properties.
For example, if you change the height of the image to 100%, up and down changes to 0% each.
If you change the background property to 60% as in the example script you, height + Top must be 40%.
I hope that this screenshot with your source code to understand the problem:
If the height or width property is zero, no picture!
I suggest not to define two properties for a dimension (for example Top and height or up and down).
If you set only one of the three properties, position of the image is not fully defined by the user, but by some default values of DIAdem.
Concerning
Christian
-
Pop - up screen to record images does not appear when you connect the camera
Original title: when I plug in my camera to download photos I don't have a pop up screen to ask me some questions were to save you more pictures. I want the pop up screen to come back.
Guest USB? Download the pictures?Hello
- Are you referring to the AutoPlay window that appears when you connect a device to the computer?
What is the number and the model of the camera?
In case you are referring to the Auto play option then try the troubleshooting steps provided in the link below to fix the problem.
Troubleshoot AutoPlay
http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-AutoPlay-problems
-
Bitmap image does not appear when other fields added
Hello
I have a VerticalFieldManager with a bitmap and a few fields (code below).
I add to an another VFM then call setBitmapField when the tile is
downloaded in another thread.The code below when the bitmap is set, the other fields, move to the
right to leave a space for the bitmap image, but the image bitmap is not visible.If I remove:
This.Add (this.authorField);
and code layout corresponding to sublayout, the bitmap fine watch.
What I am doing wrong?
---
class Item extends VerticalFieldManager { public BitmapField thumbField; public Bitmap image = null; private LabelField titleField; public LabelField authorField; public Item(ItemData item) { this.thumbField = new BitmapField(); this.titleField = new LabelField(item.title, FOCUSABLE); Font fnt = this.getFont().derive(Font.PLAIN, titleField.getFont().getHeight() - 1); this.titleField.setFont(fnt); this.authorField = new LabelField(item.author); Font fnt2 = this.getFont().derive(Font.PLAIN, authorField.getFont().getHeight() - 3); this.authorField.setFont(fnt2); this.add(this.thumbField); this.add(this.titleField); this.add(this.authorField); } public void setBitmapField(Bitmap _image) { this.image = _image; this.thumbField.setBitmap(_image); this.invalidate(); } protected void sublayout(int width, int height) { if (getFieldCount() > 0) { BitmapField _thumbField = (BitmapField)getField(0); layoutChild(_thumbField, _thumbField.getBitmapWidth(), _thumbField.getBitmapHeight()); setPositionChild(_thumbField, 0, 0); int thumbWidth = _thumbField.getWidth(); Field _titleField = getField(1); layoutChild(_titleField, width - thumbWidth, _titleField.getHeight()); setPositionChild(_titleField, thumbWidth + 5, 0); Field _authorField = getField(2); layoutChild(_authorField, width - thumbWidth, _authorField.getHeight()); setPositionChild(_authorField, thumbWidth + 5, _titleField.getHeight()); setExtent(width, _titleField.getHeight() + _authorField.getHeight() + 2); } } }
I have it! Had to extend Manager rather than VerticalFieldManager. Assumes that the optimization of the resources are so limited in-house as how fields can be arranged. Makes sense.
-
original title: Windows Update acts confused - kb955759 does not appear when I check the updates manually, but it appears with the yellow shield after you have enabled the automatic updates.
I just reset my CMOS settings, writing zeros for my hard drive, repartitioned, reformatted and used the recovery cd Gateway system to get my computer to Windows 98se - factory settings, except at the beginning of the recovery of the system, when it says "press any key for advanced options," I pressed a key and then I unchecked all the default (3rd party) applications including Norton and left only 2 checked: "Updated USB Hub" and "Windows Shutdown Supplement," while nothing has been installed, leaving only win98.
Then I used my disc XP Home (SP2) update. I, immediately after the upgrade to Windows XP, installed "Office XP with Frontpage, Developer Edition", then Norton 2012 before never connect to the internet.
Then, I connected to the internet and continuously update of Norton, before ever hitting the Windows Update page. The first thing I did then was to activate Windows, and then activate the office.
Then I hit the update of Windows "button" that says "get all your updates in one place... upgraded"Microsoft Update". I, then, just kept hitting the page update and restart, until I find the SP3. Then, I took a break, until the next day.
I have an ADSL broadband, with a Linksys EtherFast PCI card.
Then I got SP3, which installed without any problems.
So I just kept "microsoft continuous update" manually (and reboot), until there is no more updates - EXCEPT, I always uncheck Windows Malicious Software Removal Tool - which was the only screening at the final stop for the night. I think that I ticked the box "don't ask me about this update".
Then, in the morning, after you have enabled automatic updates, I noticed the yellow shield - Windows security icon (or whatever it's called), so I clicked on it and checked it was tellimg me was available [when I checked "Custom Install (advanced users)"]. What showed was 1 update - 955759 KB.
After the problem, already at the reformat (months and months), see the yellow shield telling me there are updates available, which were already installed (before rebooting), I checked manually on the internet with IE 8, pressing alt, "T", "U". There is no updated list. Then I checked through my history of update (twice), and KB955759 had not been installed.
My update setting is to let windows download ('important') updates, but let me choose when to install them.
What is the right - Windows Update (NO update important reporting) Site, or the yellow shield (reports [a] kb955759 [update])?
I can not yet confirm he is supposed to be an update for XP home kb955759, because I was unable to locate any detailed documentation on this 'thing' that protect the yellow safety seems to think is a significant update.Comment 1: To my rquest, a moderator merged your thread in the Sub-forum Win7 updates with your wire in the Sub-forum of updates of Windows XP 20 Feb-12, c. 07:50 UTC.
Comment 2: If you will not contact the MS Support on this issue?
~~~~~~~~~~~~~~~~~~~~~~~~~~
Just for the heck of it, I have disabled the automatic updates, cleared my browser cache, checked manually, updates from microsoft (windows) and found none (with the exception of software malware removal tool windows [which I have not installed]). Then, I turned the automatic updates on, and without even being connected to the internet, the yellow shield popped up with the kb955759 "update"...
Repost...
1. If you open Internet Explore (only!) to http://windowsupdate.microsoft.com and run a CUSTOM scan, KB955759 appears in results?... If so, you manage to install it and/or security updates available?
2 after no. 1 above [<>], is the 'yellow shield' icon appears in the Notification area (on the left of your clock)? .. and if yes, by clicking on the 'yellow shield' icon tells you that KB955759 or any other updates is ready-to-be-installed? .. .and if so, you manage to install it?
3 after doing 1 # & #2 above [<>], is KB955759 or any other updates offered as a ready-to-install update when you go off your computer? .. .and if so, you manage to install it?
... I guess that clearing the browser cache does not erase 'downloaded' updates.
Nope. If you want to clear the queue of the update...
OPTION A:
1. stop the automatic updates service:
Start > run > (type or copy/paste) services.msc > click OK
Double-click automatic updates > click stop
(Stopping the service will take a moment)2 remove the contents of the download folder:
Start > run > (type or copy/paste) %windir%\SoftwareDistribution > click OK
Open the download folder and delete its content
Close the window.3. start the automatic updates service:
Start > run > (type or copy/paste) services.msc > click OK
Double-click automatic updates > click Start
(Starting the service will take a moment)OPTION B:
1. open Internet Explorer (only!) to http://support.microsoft.com/kb/910336 [don't know the titles, etc..]
2. make disappear/close the Troubleshooter automatically pop up.
3 repaired 50202 in DEFAULT modes and AGGRESSIVE. [1]
4 reboot.
Does anyone know how to determine if software mailicious removal tool is installed on XP? [source ]
Check the located log file...
C:\Windows\Debug\ MRT. NEWSPAPER <> >
Related...
... This leaves us with the malicious software removal tool don't appear not.
I guess I'll have to leave "auto-update" (I often have less than 65 M of free memory left and do not have enough memory to msrt) and don't assume no other current error. [source; 17 Aug-11]
It's no wonder that you ended up having to do a clean install of Win98SE & then upgrade to Windows XP again!
================================================================
[1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not updates installed in Add/Remove Programs list. -
Status window component-fax fax Windows does not appear when sending or receiving
I can send and receive faxes using Microsoft fax in windows component, but fax status window does not appear when sending or receiving. How can I fix?
Assuming that long ago, that you have installed Service Pack 1 for Windows XP, your problem may be a badly configured third-party firewall. See http://service1.symantec.com/SUPPORT/nip.nsf/4a29389c214c78ea88256c75005f451a/713afacbd4135e0a88256c77007e526f?OpenDocument
Also take a look in the event viewer (start > run > eventvwr > OK) for errors or warnings related to the fax system. If you find one, double-click on it to open the event properties, and click on 2 pages below the up/down arrow icon to copy the events to the Clipboard. Then paste it in your response.
-
Can someone help me? PNG image does not appear on Dreamweaver cs6
Can someone help me? PNG image does not appear on Dreamweaver cs6,
Why its display with blue bg? his strange appearance... !!
Thanks for your reply...
Well, the problem was on the mode of the image. It is in gray scale, when it changed to RGB-image works fine...
Once again thank you!
-
Background image does not appear
I worked on my Web site recently, and in order to personalize it a bit more I added some background images to the cells. The problem is that the image does not appear in my browser. I tested background images of page too and nothing. It makes no sense. I select the cell, go to the properties panel, and then find a background image. Once I have select this one appears in dreamweaver, looking the way it is supposed to. After I downloaded the page, however, I check in my browsers, Mozilla Firefox and Internet Explorer, and the image is not there. All this shows is the background color of the cell or of the page, depending on the question of whether I make the background color of the transparent cell. I asked a few friends to view the page too to see if it is for them and they tell me that it is not for them either. Anyone know why this is happening? Oh I should mention I publish as an html file and I tried both .jpeg and .png file types. In addition, it's all in Dreamweaver 8. Any help would be greatly appreciated. Thanks in advance.Background ="... /... / move background2.jpg
can't go up two levels of folders from there...
Also should avoid spaces in the names of files and folders.
copy of a previous post on this topic:
the style sheet link and especially images that you have placed have paths such as
this:../gifs/ means go UP one folder level, then into the folder named ">
The problem: the home.html file is at the level of the root of the public
space web is not not to attend. So all these paths are distributed on the
downloaded pages.My guess her site definition is set to the wrong folder level in the
local and remote site.The way it should be is the local and remote should be defined in the folder
that contains home.html. Use the 'Folder of the Site Local' button to select the
good record and the "host directory" If the folder level must be
adjusted on the remote control (such as you land in a high level of private accommodation
folder when connecting with ftp and need to go to one site files
folder named "public_html" then type public_html directory of the host
the remote server info line)> The page is http://www.flash-vault.com/submissions.
> The background image is supposed to appear behind the five titles in the
> first column. It appears in dreamweaver and when I saw, but not after
> It is published.
> -
I'm trying to confirm private browsing works. At the moment, I have no way of knowing whether or not it is enabled. The purple mask, referred to in the help does not appear when selected. I should say in my privacy settings, I have never chosen "remember", for the story.
Hi willpublx, when you have selected never "remember history" in the privacy options so you are actually in 'permanent private browsing mode' and that there will be an extra mask icon to indicate that.
-
Open with does not appear when I click on a URL in Firefox on my desktop
Click right 'open with' does not appear when I click on a URL in Firefox on my desktop. The codec-c no longer works with 9 update of Firefox, so I would like to open with Internet Explorer instead until the Codec-C is compatible with Firefox again.
Add - ons:
- See-> https://addons.mozilla.org/en-US/firefox/addon/open-in-ie/
- See-> https://addons.mozilla.org/en-US/firefox/addon/open-with/
If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.
Not related to your question, but...
You may need to update some plug-ins. Check your plug-ins and update if necessary:
- Plugin check-> http://www.mozilla.org/en-US/plugincheck/
- Adobe Shockwave for Director Netscape plug-in: install (or update) the Shockwave with Firefox plugin
- Adobe PDF plugin for Firefox and Netscape: Installation/update Adobe Reader in Firefox
- Shockwave Flash (Adobe Flash or Flash): updated Flash in Firefox
- Next-generation Java plug-in for the Mozilla browser: install or update Java in Firefox
-
Hello everyone my CD Rom has stopped playing DVDs but plays the audio CD and CD-ROM. I tried to uninstall it without result. The box pop up for media player does not appear when I insert any kind of CD.
Hello
Try this:
http://support.Microsoft.com/kb/306318
b Eddie -
the Task Manager does not appear when right-clicking on the taskbar
The Task Manager does not appear when right-clicking on the taskbar
Hello
It appears when you press ctrl + shift + ESC? It seemed before? You are an administrator on this computer or is it a corporate system?
If he has suddenly ceased to be available, it's a good sign that you have picked up a virus or some kind of malware. Formal analysis in safe mode is your first line of defense.
Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org
-
My wireless router does not appear when I shoot to the top of my devices. It shows my fax, modem, scanner and a few others. But not my belkin wireless. And when I try to add it, the system can't find it. Please help
Belkin support for your model, for installation instructions.
Your router will not appear in the devices
-
Why the original image does not appear on my desktop and not Wo one?
Why the original image does not appear on my desktop and not Wo one?
I made adjustments to an image that shows himself such that adjusted with the symbols at the bottom right of the image.
I tried to drag and drop and he transferred the original image.The adjusted picture can be transferred and what I need to do or I do something wrong?
Thank you
Greg,
Claes has pretty much nailed. You will do well to spend time to learn how Lightroom works. He is not like most software that you've used before, and if you don't understand what it does and how it does, you stand a good chance of losing your images.
Try googling 'Lightroom tutorials' or 'get started in Lightroom. It's not rocket science, but it's different.
HAL
Maybe you are looking for
-
HP 61 ink cartridge: How can I get a refund or a replacement cartridge 61hp
message on the printer says not compatible. printer is hp deskjet 3510 and other 61 hp cartridges work. How to MAKE a refumd or a replacement
-
Pavilion 15 p-018tu: laptop HP with windows 10 stop problem
My HP laptop is Pavilion 15 p-018tu with windows pre-installed 8.1 unilingual. I've updated to windows 10 about a month ago. Now, my laptop is not properly blocking down. The screen goes black but the power button light turns on for a long time and i
-
Satellite R830-182 - cooling fan runs constantly
Hello I just bought the R830-182. The fan runs at 100% of the time, from that moment I start. Is it true, that I expect the fan on a laptop to kick when the CPU reaches a certain temperature? It's annoying because it's quite noisy. Also try running t
-
SP3 update ready to ask - confused on how to proceed
Hello - victory xp/sp2/I.E. 6 x /outlook express I see that SP3 is already downloaded on my computer and ready to install it when I visit ' windows update/express "... but also read the newsletter on the installation and her below has been recommende
-
Want 24: Audio channel for the HP Envy 24
I have two fancy 24 moitors with Beats audio. Is it possible that I can do the audio comes out of the speakers of two monitors? I connected the cable to THE supplied their place but that did nothing. Is it possible to do?