Path MTU issue when VPNed in of ASA5510 8.0 (4)
I have a new ASA just configure VPN access like any other ASA I ever install.
The VPN client connects fine, obtains an IP address, is capable of devices of ping on the corporate network.
I compared it to the other ASA I installed that work. I don't see the problem.
3 things:
I can't make a ping to the ASA LAN interface when VPN'ed in.
When I do a mturoute.exe to an IP inside it shows only a MTU of 196 when I use Cisco VPN dialer.
When I use the client VPN Shrewsoft I can set the MTU to 1380. When I do a mturoute.exe to an IP inside it shows 1380.
I think because it is not responding to a Ping on the local network of the SAA, which does not have the path MTU discovery.
Any help would be appreciated.
Thank you
Bert
My apologies for repeated postings but that's what you need to do
From a Windows device use this: C:\ > ping-f-l packet_size_in_bytes destination_IP_address.
The -f option is used to specify that the package cannot be fragmented. The -l option is used to specify the length of the packet. First try this with a packet of 1500 size. For example, ping -f - l 1500 192.168.100. If the fragmentation is required but cannot be performed, you receive a message like this: packages need to be fragmented but DF parameter.
suspended f in my last post
# You can try your command prompt
ping f-l 1380
so he sends a ping of 1380 bytes
then you should see something like this, if it does not receive through
C:\Documents and Settings\jathaval > ping 4.2.2.2 f-l 1380
4.2.2.2 ping with 1380 bytes of data:
Packet needs to be fragmented but DF parameter.
Packet needs to be fragmented but DF parameter.
Packet needs to be fragmented but DF parameter.
Packet needs to be fragmented but DF parameter.
Tags: Cisco Security
Similar Questions
-
VPN IPSec L2L between IOS and PIX 6.3 - MTU issue?
The side of the remote control (customer) is behind the 6.3 (5) PIX. And the side of the head end (server) is 2911 IOS on 15.0.
The IPSec tunnel rises very well and passes traffic. However, there is a server which are not fully accessible. Note, it is mainly the web traffic.
Client initiates a connection to the http://server:8000. They receive a redirect to go to http://server:8000 / somepage.jspa. Package caps show the customer acknowledges the redirect with a SYN - ACK response, but then the connection just hangs. And no other packets are received in return. I noticed that the redirected page is a .jsp and other pages that work OK are not. I also noticed that some MTU and TCP MSS configurations on the side of the head that are in place for another GRE VPN tunnel with another site. So I got in the way of the fragmentation of packets. The side PIX has all the standard configurations of IPSec as well as default MTU on the interface of the inside and outside.
When the MTU is set manually on the client computer to 1400, the access to the works of http://server:8000 / somepage.jspa very well. So I need to tweak the settings of PIX. I tried to adjust the MTU size on and abroad the interface as well as the parameter "sysopt connection tcp - mss. I don't know what else to do here.
Here is a summary of the MTU settings on the head of line:
End of the head:
int tunnel0 (it's the GRE tunnel)
IP mtu 1420
source of tunnel G0/0
dest X.X.X.X
tunnel path-mtu-discovery
card crypto vpn 1
tunnel GRE Description
blah blah blah
card crypto vpn 2
Description IPSec tunnel
blah blah blah
int g0/0 (external interface)
no ip redirection
no ip unreachable
no ip proxy-arp
Check IP unicast reverse
NAT outside IP
IP virtual-reassembly
vpn crypto card
int g0/1 (this is the interface to the server in question)
no ip redirection
no ip unreachable
no ip proxy-arp
IP nat inside
IP virtual-reassembly
IP tcp adjust-mss 1452
HA, sorry my bad. Read the previous post wrong.
(Note: Yes, the SMS on the tunnel interface should be 40 bytes less than MTU).
Do not twist the MTU, not for TCP problems (not as the first step), it is safer to play with the MSS. MTU may depend on other things (OSPF for example).
Make a sweep of a ping with DF bit set with the size (from 1300 bytes for example). By doing this, you want to check what is the maximum size of the package, which you can test through the IPsec tunnel. Once you have this value consider - subtract 40 and this defined as value MSS of the LAN interface (and adjust the value of PIX if you can).
M.
-
Performance issues when coming out of sleep
I recently built a gaming PC. On Christmas day, I finished putting the thing together. It has an Intel i7-4790 CPU running Intel HD Graphics, 8 GB of Corsair Vengeance RAM, an Asus Z97 - A Mobo and a 2 terabyte Seagate HDD. I installed Windows and put everything in place. Then a week later, my MSI GTX 970 arrived in the mail.
So, I take the thing to sleep and decreases the performance of the whole thing. Videos YouTube stutter, simple as games fight of World of Tanks to run at its usual rate of 60 fps. To avoid this, I simply restart my comp and then it works fine. performance is back to normal.
A few weeks, Windows gave me a message on one of the Nvidia drivers causing performance issues when you wake up from sleep. I don't think a lot of it and rejected it. I'll try to reinstall all my Nvidia drivers. I uninstall the Intel HD graphics driver a few days ago and has not changed anything. I would appreciate an answer to this problem because I would like to continue to use the "sleep mode" because it consumes less energy and prolongs the life of my case of LED. Thank you!
In order to diagnose your problem, we need run Windows performance toolkit, the instructions that are in this wikiIf you have any questions do not hesitate to ask
Please run the trace when you encounter the problem -
Windows live mail issue when my wife deleted our email, we lost our files and folders
Windows live mail issue when my wife deleted our email, we lost our files and folders
Thank you for visiting the Microsoft answers community site.
The question you have posted is related to Windows Live Mail and would be better suited in the Windows Live Solution Center.
Please visit the link below to find a community that will support what ask you:
http://windowslivehelp.com/forums.aspx?ProductID=15
Cody C
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
IOS Firewall (CBAC) + Path MTU Discovery
I was reading just through the 12.2 T documentation CBAC and saw the section on the icmp inspection and how he wildcards outside IP because no matter what a leap could return it with the responses of time exceeded and inaccessible destination.
See that made me wonder if this was true for TCP as well, especially in situations that involve Path MTU Discovery. If an internal system initiates an outgoing TCP connection that is inspected by the FW IOS, an external host responds with an ICMP Fragmentation needed but DF Bit set to message, the router will consider this part of the session and send it to the host internal?
Thanks in advance.
-Mason
Mason,
ICMP by CBAC inspection does not include packets 'package-too-great. Therefore, you must explicitly allow these packages in your ACL for PMTUD to work that the router would not consider these packages to be part of the TCP session and drop them.
See the link below for the types of ICMP packets supported by CBAC.
http://www.Cisco.com/en/us/products/ps6350/products_configuration_guide_chapter09186a0080455b0d.html
HTH,
Sundar
-
Using the tunnel path mtu-search command
Hello world
Need to know why to use the tunnel-search path mtu command--if we have the GRE tunnels at both ends?
Also the same command can be used if we have GRE over IPSEC VPN?
Thank you
MAhesh
You can read the description here:
It forces unattainable sending should exceed US MTU, rather the fragmentation occurs.
And Yes, it applies to GRE over IPsec and is quite a good feature in most cases.
-
This program has known compatibility issues when I try to install sql server 2008 in windows 7 X 64
I use windows 7 (X 64), and when I try to install sql server 2008 I have this message & can not install it:
""
This program has known compatibility issues:
Check online to see if solutions available on the microsoft website ara, if we find solutions, windows will automatically display a Web site that lists the steps, you can take.
Program: Microsoft sql server 2008
Publisher: Microsoft
When the sql server Setup program is finished, you must apply the service pack of sql server 2008 1 (SP1) or a later service pack before you run sql server 2008 on this version of windows
Looking for online solutions run program cancel
""
And I check online for solutions & recommended program installation, but also the same message appear, so please help me, how can I fix
Hi DoudyEwais,
1. How do you try to install SQL server 2008 on the computer?
2. did you of recent changes on the computer?
I suggest that you try to install the program using compatibility mode by running the program compatibility issues
Make older programs in this version of Windows
http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows
List of known issues when you install SQL Server on Windows 7 or Windows Server 2008 R2
http://support.Microsoft.com/kb/955725
If the previous step fails, then after your query in the SQL server forums by using the link below.
SQL Server forums
http://social.msdn.Microsoft.com/forums/en/category/SQLServer/
-
Facing the issue when inserting data by region table
Dear all,
I have a region of the table which will be created initially five rows and im generating a sequence so that five lines simultaneously. First insertion was smooth without any issue.when I train for the second time, loading the page while it shows 10 records and then the third time, she displays 20 records in the table. He brings the existing record that is inserted into the table. Please get a solution to solve. The script below is my AM insert method
If (! vo.isPreparedForExecution ())
{
vo.executeQuery ();
}
VO. Last();
int fetchedrowcount = vo.getFetchedRowCount ();
System.out.println ("number of rows->" + vo.getFetchedRowCount ());
for (int i = 1; i < = fetchedrowcount; i ++) {}
vo.setMaxFetchSize (0);
VO. Last();
VO. Next();
Line OARow = (OARow) vo.createRow ();
vo.insertRow (row);
row.setNewRowState (Row.STATUS_INITIALIZED);
row.setAttribute ("ClTransId", getOADBTransaction () .getSequenceValue ("apps.xxhrq_chcklist_trans_s"));
}
Heepth,
The logic is simple.
When the page initially loads, it brings 5 lines in your outer join function, then your code create another 5 rows based on the fetchedRowCount which is 5. All together, it makes 10.
Second time when the page loads, the query returns (5 + 5) 10 rows and your code create another 10 rows based on the fetchedRowCount which is 10 this time. All together, it makes 20.
It is clear now?
Now go ahead and implement the solution I proposed. If all good, would you please close the thread by checking the useful and accurate answers. If you have questions let us know.
See you soon
AJ
-
new to InDesign 6 months I do a newspaper page layout every two weeks. This time, when I opened my model, set up for the next issue, when I typed "W" to display the grid, I have something I never saw elsewhere. ". The background was filled with a new grid of tiles rather than the void behind the newspaper that I'm used to seeing. I don't know what happened, but it seems that Adobe has tinkered once more with the program. The last time this happened, I lost the icon "cover the columns" at the top; now, it's a case of two steps to put the head-lines across more than one column. NOT useful.
There is probably a command or a term, I don't know that this right but my main question is why, when I did this dozens of times before, doing something different will come this time. (I know, without replica.)
I'd also appreciate comments that someone out there could offer re why now when I tap on InDesign, is there a slight pause before that something happens to the screen. What is my new Mac, or something to do with the program that I can fix it?
Thanks, Sacie
It looks like the grid of the document, which can be disabled in the view menu.
-
Licensing issues when I go to re - install on a new machine?
I had Illustrator CS5 installed on 2 machines (1 license). A machine that crashed, obviously before, I managed to uninstall officially. Did I meet licensing issues when I go to re - install on a new machine?
Yes, you are noit be able to activate the new installation until you disable the one you had. Uninstallation is not necessary but disabling is. You can contact Adobe support using cat and they can manage the deactivation of inaccessible installation.
Serial number and activation support (non - CC) chat
http://helpx.Adobe.com/x-productkb/global/Service1.html ( http://adobe.ly/1aYjbSC )
-
Hello
Why my path changes position when I paste (in a mask, or position,...)?
I use CS6 AE and AI CS6.
I opened a document IN AE and converted into forms and resized and repositionnes it.
Then I tried to copy and paste the path of the shape to a center of lens flare (to animate the stray light). And it worked, but this has changed a bit and the outside.
Thank you
Elele.
Solved! Video by Rick Gerard is here-> path mask or shape path - YouTube
-
Performance issues when you build a large crossroads
Hello
I have a performance issues when you build a large crossroads.
So here's my situation:
We use Discoverer Plus 10.1.2.45.46c
Database Oracle 9.2.0.6 on Windows 2003
OAS 10.1.0.3
1.5 GB of RAM on my PC
-J' planned a workbook with 1 single worksheet that takes 2 minutes to run. The table generated in the database to store the results from 19 columns and rows to about 225000 (I know that's a lot, but it is what the customer needs).
-When I opened the workbook, it takes about 2 hours to recover the data. The data is retrieved in groups of 1000 and at the beginning, the lines are read much faster than at the end. There are also 15 minutes more to build the crosstab. So overall, it takes 2 hours and 15 minutes for the crosstab display on my screen.
Can someone explain to me:
-Why does take so long?
-What can I do to improve the execution other than changing the application or displaying the results in a regular tab? Is there some setting that I can do on the database of the Oracle Application Server?
Note: I have reproduced the worksheet in a simple tab and demand it. The table generated in the DB to store the results is the same and it takes only 2-3 minutes to open this spreadsheet and extract all lines.
Thank you!
MaryHi Mary
If you have 225 000 lines in your basic spreadsheet, then it will take a lot of time to produce a crosstab. The reason is that Finder can not calculate how many buckets he needs until he has read all the data. I can almost guarantee that with 225 000 lines to read and manipulate that you are short of memory.You might be better suited someone create and populate a table with the results you need rather than try to get the discoverer to calculate values in crosstab on the fly. If the final result of the crosstab is a few lines of aggregated data, then this is what is right for your table. The advantage of using a table and a few SQL (or PL/SQL) is that you will not be using your local computer during the aggregation / sorting phase. Don't forget a crosstab also sort based on the values in the left columns, the columns you have aggregations (buckets) you will have and most necessary sort. Using a table, you can index or even partition the results that will make for a much faster recovery.
As a tip, recommend Oracle, confirmed by myself during the exhaustive tests, no do not build large paintings to double entry due to the performance of touch that you will have. The tables are much more efficient because you can pull back x lines at once. You can't do that with a crosstab and all values must be read before that whatever it is is displayed.
Does that help?
Concerning
Michael -
Office jet pro 8610: printhead issue when idle for a long time
I live half the year in Florida and the other half in North Carolina. I have the same printer model in both places. On the advice of technical support from HP, I remove the ink cartridges and put them in a bag before I left for the season. I just returned to my house from the North and had a problem with the printer/ink. It was resolved by HP by sending me a new print head, because this printer is still under warranty. But the next time it won't. I try to learn if there is a better way to deal with the issue of a printer sitting inactive for six months. Must I also drop and the bag to the top of the print head? Should I just take the cartridges back with me, so they will be used frequently? Is there a reason to think about letting the printhead to sit empty for months would cause a problem? ANY advice would be welcome, because I've always had problems upon returning to a unused printer. TIA!
Hey @sls2,
I see that you are worried about having your printhead replaced on your e-all-in-one Officejet 8610 printers if they have any questions after you have not used for several months. I can answer for you.
First of all, if the printer is no longer under warranty, they print head would not be replaced. It is a replaceable part, however you must buy the HP printhead if cartridges does not solve your problems. Here are some things that can be done:
Let the printers power when they are not in use. If printers are turned on, the printers can do the maintenance to keep the cartridges and ink system to dry more quickly. This can save your print heads. Of course, this does not work if there is no power when you are away.
Buy an extended warranty for printers. You can contact the HP Support by clicking here and filling out the form below and they can provide you with options of extended warranties and treat everything immediately. Please note that they will need serial number of the printer to record it all for you. You can also buy a warranty by visiting HP Shopping. When you follow this path, you will need to call the number included in the package of warranty and they will need serial number of the printer. Whatever it is, the printer should work when you buy the warranty.
Buy a HP Laserjet Printer. LaserJet printers use toner, which is a dry power rather than the wet ink. These printers may be left in storage for years, opened again and can always print. This would put an end to any concerns about the cartridges or the print heads. The disadvantages of these printers is that, unless you use a single black printer, the cost per page is superior for printing from the Officejet 8610. This path would make printing very expensive photographs, so this is something to be aware of the fi.
Buy a printer with a system of two-ink cartridge. HP printers with two ink cartridge systems have print heads integrated cartridges instead of the printer. This means that if the cartridge doesn't work over the cartridge can be replaced instead.
The downside of this is that your average cost per page to print would increase. You can compensate for this by subscribing to the printer for instant ink program and cancel your subscription until you change your location. You can learn more about the program by clicking on this link.
Please let me know if that answers your question, or if it solves your problems. If so, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.
-
Certificate issues when I try to use Remote Desktop connection
original title: certificate problemsI recently followed a remote office to an invalid certificate problem. The certificate indicates it of from Microsoft, but something shows it as being invalid and so I can't use it to 'renew or update the current certificate' when trying to connect remotely. My question... How should I do to edit the Group Policy (gpedit.whatever is the end!) when it is not loaded on Vista Home Premium? Whenever I search for the program, need me XP or Server 2003. Any help out there in the world of technology?
Thanks in advance!
JimA likely problem here is a name mismatch. For example, if the certificate was issued by a server named Server1.contoso.com, you type Server1 just this error message could appear. If this does not help, I suggest to look at the following: http://social.technet.microsoft.com/Forums/en-US/winserverTS/thread/a67193bd-f5a5-4aff-9a66-c02bb90b2e74
-
Whenever im trying to uninstall java its gives me the r erro "error application of transformations. Check that specified transform paths are valid.
Ive tried to install a different version but its saying that I need to uninstall the old version first. I can't find solutions to it.Help please! :)Hello
1. Once you get this error message?
2 are you getting this error when you use a particular program? (Specify the program)
3. have you made changes on the computer before this problem?
I suggest you run the fixit from Microsoft Fixit article and if it helps.
Solve problems with programs that cannot be installed or uninstalled:
http://support.Microsoft.com/mats/Program_Install_and_Uninstall/
If you experience this problem when you use the Microsoft Office program, then I suggest you to refer to the following Microsoft article and check if it helps.
"Error application of transformations. Check that specified transform paths are valid"error message when you run Office 2000 Setup: http://support.microsoft.com/kb/299699
Please provide us with more information, so that we could help you to solve the problem.
Maybe you are looking for
-
How can I share contacts and calendars between two Apple ID? Also my wife and share our music iTunes between our IDs?
-
What is said. Every time I open Firefox, Firefox tells me that all my addons are either incompatible with this version or it asks me to reinstall them or both. It's happened to all versions of Firefox, I tried. I'm going to install Firefox, then inst
-
Portege R500 - configure the parser on the Port Replicator
The system is Portege R500 with a port replicator Port MS Vista running. Port replicator has a Philips 19 "LCD monitor System has BEEN configured so that when the system was in the duplicator monitor 19 "inches would be active and system monitor is i
-
IPad can't drag, but screen work?
I have an air of the IPAD, which suddenly works quite weird. The children said: asked to hit a message/selection and then the screen stopped to respond. Or almost stopped. Can I use the screen, but not by scanning and scrolling, etc. works pinch. I c
-
I just got an iPad mini2, I can receive but can't send emails. I have an iPod and another iPad that work very well. Help!