Path pre 14 motion on the export problem

Similar Questions

• Lightroom CC (last) cannot change the export path

  When I try to change the export path, the "Import" dialog box appears in the background, and I can't change the path.  The only option is to choose to put the file in the original location in a subfolder.

  In the image as an attachment, you can see the export in the background box.  Most of the time that I have to cancel on the file path area "choose", because it does not meet the entry.  Everyone knows about this problem?

  

  Never seen before.

  You can try to reset the preferences: How to reset preferences in Lightroom?-the Lightroom Queen

• Problem with the export of moving images always

  Hello.

  I would like to create a sequence where the film is made of still images (photos in.) Format PSD, reminiscent of an old Polaroid pictures) added motion.

  Now the problem is that after having made and export (DV, both interlaced and progressive format) these images in motion somehow bounce or jump on the edges, especially the inner white edge. No matter if I turn on or off the option "optimize images.

  I have attached a short excerpt, but it shows what I mean.

  The file is 1MiB, 5s, progressive, compressed with XviD with quantifier constant = 2, resized to 640 x 480.

  But all these changes to the exported file does not matter what so ever. It's the same thing with the first export.

  What should you do to improve the fluidity and smoothness of the film?

  I use Premiere Pro 1.5.

  It was quite interesting...

  Thank you all for this cool chain of messages...

  The last thing I did, is just now, I copied the image of Don in photoshop and checked the dimensions and so on...

  Then I opened a new file of the same size and pasted my image of Dani in the same space...

  Then I made a blur of the edges where the images meet at the border almost white.

  Any at first even Curt settings and even exported in a way...

  The earlier image of Dani, I've done was of different dimensions (not gift copy of what I did this time) but was imported and exported similarly suggestion of Curt (how he did his test)

  It was: import dv ntsc 720 x 480 29.97, predefined default...

  Export failing media mp4 encoder

  so, what I discovered (I think) the dimensions of the image of the gift (and my copy using Dani) need to be scaled down in the video black it causes jumpy sort things.  My previous trial of Dani, where the image was not reduced almost at all, does not seem to jump.  Everything else I did the same thing, the blur of the edges and so on... The only variable I see is the image size and the amount of scaling to a nice size of the screen.

  These two products demonstrates, in my view.

• Problem in the export using the QUERY functionality

  Problem in the export using the QUERY functionality
  
  
  I'm trying to export some rows in a table using the query functionality
  and I have some errors... I'm using the syntax is
  
  system@orcl QUERY = scott.emp expdp: '"WHERE emp_no = 123455" '
  DIRECTORY = data_pump_dir DUMPFILE = data_pump.dmp
  LOGFILE = data_pump_12345.log INDEX = n
  
  Can someone tell me please the problem with that statement
  
  I also tried to use the simple export
  
  exp file system@orcl = orcl_export.dmp log = orcl_export.log
  tables = Scott.EMP index = QUERY = n------"WHERE emp_no\ = 123455\"
  
  and this error
  
  EXP-00008: ORACLE error 904
  ORA-00904: identify invalid
  
  My os is Solaris
  Please let me know what the problem

  Hello

  Try to create parfile and use that, otherwise, you will need to escape each clause correctly to run exp or expdp successfully.

  test.par

  tables=emp
  query="WHERE emp_no=123455"
  
  or
  tables=myobjects
  query="WHERE owner='SYS'"
  
  $> exp username/password parfile=test.par
  
  Export: Release 10.2.0.1.0 - Production on Thu Mar 19 10:17:48 2009
  
  Copyright (c) 1982, 2005, Oracle.  All rights reserved.
  
  Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
  With the Partitioning, OLAP and Data Mining Scoring Engine options
  Export done in WE8MSWIN1252 character set and AL16UTF16 NCHAR character set
  
  About to export specified tables via Conventional Path ...
  . . exporting table                      MYOBJECTS      22650 rows exported
  Export terminated successfully without warnings.
  

  Concerning

  Published by: OrionNet on March 19, 2009 10:21

• Dual Boot with windows XP Pro with 2 HARD drive, error on secondary windows install: "Windows did not start because of a configuration of the disk of the computer problem. Could not read the selected boot disk. Check boot path and disk hardware... »

  Hi, I recently bought a new Hitachi 1 TB internal hard drive. I wanted to do a clean install on the new drive (d), be able to dual boot my computer and leave my old 300 GB disk (C :) as the primary windows installation. After physically installing the new HARD drive, I noticed that "new hardware found" and the the brand name flashed in the bottom right corner. I thought I'd see the new hard drive in my computer, but I did not. I initialized the new HARD drive with the computer management window (right click on my computer - manage) and I also formatted in NTFS (I had to change my printer hard drive letter to assign the new HARD drive with the letter D, but I've made other changes after this step). Now, I could see and use in my main windows on the C: installation. I then installed a windows new copy XP pro with the installation CD I got for my C: but on the D: (Note: I have a Dell computer (and the Dell reinstallation CD) and my current version of windows has SP3 while the installation CD is only SP2) (I also reformatted my HARD drive during the installation of windows to NTFS)

  Now when I try to start on installing the new on my D: I get "Windows did not start because of a configuration of the disk of the computer problem. Could not read the selected boot disk. Check startup disk and hardware access path. "and another line saying to refer to manuals HARD drive and windows.

  My Boot.ini file at this time was:

  [boot loader]
  Timeout = 5
  default = multi (0) disk (0) rdisk (0) partition (2) \WINDOWS
  [operating systems]
  "multi (0) disk (0) rdisk (0) partition (2) \WINDOWS="Microsoft Windows XP Professional "/ noexecute = optin/fastdetect
  "signature (ac516a5c) disk (0) rdisk (0) partition (1) \WINDOWS="Microsoft Windows XP Professional own "/ noexecute = optin/fastdetect

  I looked towards the top of this help page, but for now I'm unlucky:

  http://support.Microsoft.com/kb/314477

  (The next steps I took by throwing from the Windows CD and go into the repair console)

  I tried to use the bootcfg /rebuild but the line to boot.ini for my secondary HARD drive still does not work.

  He gave me something like:

  [boot loader]
  Timeout = 5
  default = multi (0) disk (0) rdisk (0) partition (2) \WINDOWS
  [operating systems]
  "multi (0) disk (0) rdisk (0) partition (2) \WINDOWS="Microsoft Windows XP Professional "/ noexecute = optin/fastdetect
  "signature (ac516a5c) disk (0) rdisk (1) partition (1) \WINDOWS="Microsoft Windows XP Professional own "/ noexecute = optin/fastdetect

  I also tried to change the signature() to multi (0), but it did not work. (or try almost all possible permutations of disk() and rdisk() partition() 0 to 2).

  I also tried to use expand F(dvd-drive):\i386\ntkrnlmp(I_have_a_duo-core).ex_ D:\windows\system32\ntoskrnl.exe and a few other combinations, but I when I login as D:\windows simply, it fails to extend with a message like "could not develop" or C:\windows I get "restricted access".

  I have not yet tried CHKDSK/r, but since I did a clean install on a newly formatted drive... I don't think it would work.

  I've also marked the partition on the D: as active (in computer management), but it did not help me.

  I've done a first installation of windows repair, strangely, I couldn't fix this one... Still does not work...

  My default windows installation yet works very well & I see that windows has been installed on the D: but I'm ideas from how to operate the dual-boot, can someone throw me a BONE on what to do?

  Maybe try to do something with the Boot Manager (whatever it is?) Create a new partition and use it as a boot manager? I don't really want to do this, because if I made a mistake I will be unable to use my computer and dual boot should work without going through all this trouble... But I found this page: http://technet.microsoft.com/fr-fr/library/ee829686%28WS.10%29.aspx

  Could a clean install two HDD help? I hope I won't have to do...

  Someone has an idea?

  PS: I'm not such an advanced user so I need a solution step by step, thanks!

  Edit: I also noted that I can't see my new HARD drive in my BIOS... weird... SATA-0 is my old drive HARD 1 and 2 are my dvd 3-5 readers are 'off' and it doesn't seem to be anything that it is plugged in. I also have 4 bays for internal HARD disks. Now, 2 are busy.

  Edit2: I looked inside my case and enabled the good Sata in the Bios after a reboot it detected the drive correctly. Dual boot doesn't always work well... The fact that it was disable in the BIOS while I was installing the new HARD drive could change anything? Hmm...

  In case I wasn't clear enough: I had a windows XP Pro installed on my C:, bought a new hard drive and installed the same copy of windows on it (d). I think that should allow me to double boot between the two installs different. Even if for some reason I can't boot from one on my D:. Andrew, I do not understand why you so far physically disconnect the other drive, the point of the whole operation is to build a boot.ini file so that the BIOS knows that it y facilities 2 windows and you allow to choose (and not have conflicting problems between the 2 systems), someone correct me if I'm wrong? "Expand" the part of my first post made reference to one of the solutions provided by Microsoft in the first link that I have included in my previous post (but I can't seem to work).

  In addition, it is the procedure that I followed: http://www.ehow.com/how_5950826_boot-two-different-hard-drives.html

  (except I've had the first installation already done).

  Andrew "also, once a new hd is plugged on the pc & running, most of the BIOS will place (them) as 1st priority hd, set the BIOS to do this", you mean that by installing separately from windows on each unit when the other is not plugged in, I could choose what disk to start from defining their priority in the BIOS once they are all plugged back? It's too tedious (as I intend to move frequently between the 2 installs) and requires a computer to other users of the lack of computer knowledge. Unfortunately, it is not a viable option.

  EDIT: I DID IT! Hmmm... Well, I double checked in the recovery console, the path of the new HARD drive with the arc command Scan. Tried to start again with the MULTI (0) in my boot.ini and it worked... I also had my windows install CD in. Maybe that is why I could not start, windows needs the CD to complete the installation? Weird, I don't know what I did to the difficulty it... but hey, it works! Thanks for your ideas guys!

• Problem, try to install the exporter of Cascades in Photoshop

  Hi all

  Yesterday, I was using the export cascades plugin for Photoshop with no problems. Today, the plugin no longer works. o I tried to uninstalling and downloading from the Web dev site. Now when I try to install it I get an error saying: The Cascades exporter plugin has no valid Signature.

  Can you help me here.

  Thank you

  PS: I use Photoshop CS6, I know it's for CS5 but it worked yesterday.

  This problem has been resolved and the new version will be available for download next week.

• Problems with the export of

  Hello

  I had problems with the export feature in Photoshop 2015 CC. I think that the problems started some time around the most recent update, but it is possible it all started when I used the photo frame Script (filter > render > photo frame). I'm not sure. But as you'll see below, it is almost that the software attempts to create a setting when I try to export an image.

  In any case, when I try to use the export function, the image that appears in the dialog box is stretched and distorted.

  

  I can resize the box and the image will then appear normal, but then when I click on "Export all", the screen looks like this:

  

  The box save never actually appears. It's just a white box with a black column. It's almost as if the screen is not complete the drawing.

  And it seems that this problem starts even before I got to export in the form box. The beginning of Photoshop screen looks like this:

  

  The file names (which I have gray here) are not complete. They end up just with a white line that reaches out to the right of the screen.

  This has happened for at least a few weeks now. Stop smoking out and restarting does not help. I tried to reset my preferences and that did not help. I tried to delete the preferences file and it still happens.

  BTW, the Save for Web feature works very well.

  I work on a Mac with the following attributes:

  

  My Mac software is up to date, as well as Photoshop.

  Can someone help me understand what is happening and how to fix it?

  Thank you-

  Mary

  If you see a picture frame in the preview, but not in the exported file, I think that you have driver video card problems.

  If you go into Photoshop preferences > Performance and uncheck 'Use Graphics Processor', the problem goes away?

• Last night my 5 Lightroom suddenly seems to update. A shooting blue veined lgo ratings appeared on my screen and many of my settings have been changed. My problem now is that when I export an image on my drive C:, the exported image n

  Last night my 5 Lightroom suddenly seems to update. A shooting blue veined lgo ratings appeared on my screen and many of my settings have been changed. My problem now is that when I export an image on my C: drive, the exported image is no longer automatically appears in my Picasa files as it has for years. How can I fix this please?

  Hello

  Greetings!

  In the export dialog box change the export after option.

  

  Concerning

  Jitendra

• I can't export my files (raw, jpg, tiff, any). always a notification "the path of the exported file cannot contain special symbol '='. ' is displayed. Why? I don't know what is the path to the file. at least, file name is not special symbol.

  I can't export my files (raw, jpg, tiff, any). always a notification "the path of the exported file cannot contain special symbol '='. ' is displayed. Why? I don't know what is the path to the file. at least, file name is not special symbol.

  The path of the file is the full description where the file is located in the language of the operating system, including drive, directory and file name and extension.

  

  In the above example, the file path combines the two circled items-"E:\Webpix" and "BleedingHeart.JPG", the path to the file would be "E:\Webpix\BleedingHeart.JPG".  If you do not have an equal sign in the name of the file, you must have one in the folder or the equivalent.

• Export problems for the creation of insert script

  Version 3.0.04 Build HAND - 04.34
  
  Hello
  
  I'm trying to use SQL Developer to create an insert script for only a certain number of columns in a table, but it does not work for me. That's what I do;
  
  Step 1. View current table with the DATA tab
  Step 2. Right-click in one of the columns and choose 'export' in the menu dropdown.
  Step 3. Export Wizard - step 1 of 3 dialog allows me to choose the Format to INSERT and save it as a single file.
  Step 4. Export Wizard - step 2 of 3 in the column named "Columns" I change the symbol asterix at the columns I want in my export file, using the rocking on broad dialogue.
  Step 5. Wizard - step 3 of 3 hit finish Export
  
  Open my export file, and has a script to insert with all of the included columns, not what I wanted or determined through the wizard process.
  
  Is this a bug or I do something wrong?
  
  See you soon
  Ben
  
  Published by: benton on Sep 3, 2012 15:54

  >
  I downloaded and installed Version 3.2.09 build HAND - 09.30 the SQL Developer.

  The same problem occurs.
  >
  Try to "unload" in the navigation tree. Right click on the table and get him out of there, instead of from the data tab.

  Display the results.

• Problems with the export of PDF to TIFF (a PDF page export also several images in TIFF format)

  Using Acrobat X professional, I'm trying to convert a PDF to multiple page in multiple TIFF files - that is, each page of the PDF file is converted to a TIFF file (for example, a PDF file with 50 pages would cause 50 TIFF).

  I created a remedy so that I can possibly process batches of PDFs. My action in two stages:

  (1) flatten layers

  (2) export all images as TIFF

  -the files are exported to a folder on a network drive

  -file settings are: Monochrome = CCITT G4 / grayscale = LZW / color = LZW

  -color management: RGB = off / off = CMYK / grayscale = off

  -conversion: color space: determine automatically / resolution: 300 pixels/inch

  -extraction: exclude the lower images: no limit

  My PDF is searchable (OCR has been applied). I checked the file to see if it has all the layers - this isn't. The file was created with InDesign.

  Basically, once the action performed there are several exported for each page - TIFF files and when I open the TIFFs they are parts of each PDF page. For example, if a single PDF page has three images on it then three TIFFs are exported for each image instead of a TIFF that is identical to the single PDF page. Then, when I try to treat a PDF with 50 pages that I'm left with is a folder with 150 TIFF files (and not 50 TIFF files - a TIFF for each page of the PDF).

  Here is an example of how files are renamed due to export:

  • HD_08_Issue2_E_Page_02_Image_0001.tif
  • HD_08_Issue2_E_Page_02_Image_0002.tif
  • HD_08_Issue2_E_Page_02_Image_0003.tif
  • HD_08_Issue2_E_Page_02_Image_0004.tif
  • HD_08_Issue2_E_Page_02_Image_0005.tif

  I tried to use the action on a PDF file that had not been OCR'ed and I had no such problem. The only thing I can think is that it is the OCR which is the origin of each page of the file PDF to split into multiple images? The majority of the files that I need to convert PDF to TIFF had applied OCR.

  Any ideas? Thanks in advance!

  In a Save command, you can use the export to TIFF in the output Format.

• Export, incorporated the reboot problem video flv

  After export my project (as a MOV or SWF file), when I play the exported file, flv video, I have incorporated in the starts of timeline on every time that a motion tween starts in a separate layer. Why this is happening? I use CS6.

  Ah, thought of her. Totally my fault in reading in flash, the video freezes on its final framework, which was to the effect that I was intending, but export built-in FLV repeat apparently, so I just took a screenshot of the last image and put it in during the duration, I wanted the frame to remain frozen. Your suggestion actually led me to this achievement, thank you.

• export plugin: how to learn the path of the source of the exported files?

  Short version: an export plugin to determine the path of the source of an image that was exported as a copy in a temporary directory?  If so, how?

  Long version...

  I am a user SDK newbie, writing a plugin which implements multiple images to my own external program which them melts and produces one or more new images that the user probably wants to reimport into Lightroom.

  I have the plugin works OK with export to a temporary directory.

  Now I would like to add a feature in which my program gets access to the path of the folder to the original image, so that it can offer the user the ability to record images of result in the same directory.

  Is it possible for the export plugin get the source for an exported image path, say an object of rendering?

  Can also export plug-in information identical or similar, otherwise, for example by determining the path for the folder that is currently selected in the Lightroom Catalog?

  Thanks for your suggestions!

  -Rik

  I don't think that the metadata for source path are in the exported file.

  Once I manually coded the source path in the jpeg file to export, but I stopped doing that, now I just save some info I need as part of the ID "at a distance" (assuming that to publish the service).

  But maybe I misunderstood. I mean, when export the source path is readily available as rendition.photo:getRawMetadata ('path') - is that what you mean? (I thought before that you were speaking after export, possibly loooong after export...).

  Rob

• Export the sound problem

  On Win 7, I have a Cp CS6 project with 11 slides. Each slide contains audio. The audio files are in the library in the form:

  Audio text 1

  Audio text 2

  ...

  Audio text 11

  1.

  When I opened Audio-> Audio management and try to export audio from here (simple or all at the same time), it will appear a dialog box asking me to choose a folder. I chose an empty folder. Then a dialog box appears, asking whether to replace existing files (with options Yes / Yes to all / no / not at all). No matter what I want, nothing is exported. The folder is empty as before.

  2.

  Second option is to go to the library and export from there. If I select all the audio files 11 and right click and click Export, then choose an empty folder and export, the following files are in this folder after export. There are only 4 and strangely named.

  Text to Au.mp3

  Text to Au.wav

  Text to Aud.mp3

  Text to Aud.wav

  3.

  Third option is to select a single file in the library and export it. And this works as expected - it creates a mp3 or wav file. However, the export one is inconvenient because:

  (a) the window "export as" does not remember the folder previously chosen, so whenever it is necessary to choose the root folder

  (b) the window "export as" does not remember the mp3 format, so 2 pairs click every time

  Is there a method to make Captivate allows multiple audio export at the same time? Is this a problem with Captivate in general or only with my file or a workflow?

  I think that this question is on the same line as your other question TTS.

  What is happening on this project only? The error and export thing?

  Instead of the import library, try to copy with audio sldies to the other project and export of the other project?

  Certainly you can export several audio files of the library, is basically able to export to two forms of compression MP3 and WAV.

  and it is referred to as the audio text # (with number.)

  Thank you

  Anjaneai

• Export the CS3 problem

  I have a little problem with the export of hardware H.264. MP4 output. 2 Pass video bitrate. While 720 p resolution. and I get something like this: http://www.youtube.com/watch?v=amvrnT1zFthecan someone tell me what I am doing wrong? (I speak of formwork)

  PAL 25 fps, NTSC's 30 frames per second

  If your film is really PAL, you should use a setting of appropriate project