Pav-15 e060sx: upgrading RAM for pav-15 e060sx

Dear all,

I have e060sx pav-15 with 4 GB of DDr3 memory single Sun. The laptop have two memory slots. I want to know can I add one more 8 GB Sun to make 12?

What is the maximum RAM supported in this model where can I find the documentation?

Please help.

Kind regards




The maximum RAM upgrade of this unit is 8 GB. See page # 4 of Chapter 1 for more information

Tags: Notebooks

Similar Questions

  • Want to upgrade ram for my Lenovo ThinkPad T61 6463 - B45


    I want to upgrad ram for my Lenovo ThinkPad T61 6463 - B45 actually 4 GB (2 x 2 GB) instead of 8 GB (2 x 4 GB). I found some in my next computer store 4096 MB-DATA Value SO - DDR2 800 MHz. But I don't know if the PC2-6400 (800 MHz) would work in my notebook.

    Can someone confirm if these would work? Issue in this page , I found the following information:

    Yavuz, welcome to the forum,

    Looking at the specs you should be good to go, but have not personally tested, I can't be 100% sure.

    What really works, as I installed it in my T61p is Corsair VS4GSDS800D2 G.

  • HP DV4-1502TU: upgrading RAM for laptop HP DV4-1502TU

    I want to upgrade RAM 3 GB to 8GB for my laptop HP DV4-1502TU laptop. Please let me know if it can be upgraded to 8 GB and if yes let me know cost of 8 GB of RAM and where to get. I live in Mumbai, India.

    Thank you very much


    Hello @VaibhavDalavi,

    Thank you for visiting the HP Forums! A place where you can find solutions for your problems, with the help of the community!

    I read your post on the memory Modules and wanted to help you!

    According to your specifications, your laptop can support up to 8 GB.  For more information about prices and/or purchase, please contact HP support by phone.  Please use the following and create a folder for your question and contact HP. If you do not live in the United States / Canada, please click on the link below to get contact information for your region.

    Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution' , this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

    Have a great day!

  • Help upgrading RAM for Pavilion G7 A7A46UA

    I'm looking to get more RAM for my HP Pavillion G7. I searched spare parts with the number of my product (A7A46UA) and noted that the replacement part would be

    Module memory PC3-12800 4 GB, 1600 Mhz, 641369-001 (SHARED)

    Can anyone confirm or deny this?
    Here is a picture of my current RAM

    Thank you

    It's actually a very specialized type of memory called DDR3L low voltage (1.35 volts).

    It's the same thing:

  • Upgrading RAM for Pavilion dv6t - 3000 CTO Select Edition Entertainment Notebook

    Model Pavilion dv6t - 3000 CTO Select Edition, Prod #VXO69AV, Intel Core i5 - 450 M (2.4 GHz with 3 MB L3 Cache) with Turbo Boost up to 2.66 GHz, 160 GB Solid State Drive Flash Module, 1 GB ATI Mobility Radeon HD 5650 switchable graphics, Windows 7 Ultimate. I currently have the original 6 GB of ram that came on the HP laptop, which includes a stick of 4 GB and 2 GB key.

    I want to spend the maximum amount of ram and the ram for maximum performance (speed). Analysis of says I have 6 GB of ram and the maximum ram is 8 GB. He also says that I can buy one (or two) 4 GB DDR3 PC3-12800. CL = 11.    NON ECC unbuffered.     DDR3-1600.   1.35v. here is the link for the crucial scan and recommendations:

    Here is a link below for my maintenance SE dv6t and Service Guide, with memory on page 70. The service guide references DDR3 PC3-10600 clocked at 1333 MHz.

    Issues related to the:

    The Crucial scan seems to direct me to the memory of better and faster that is listed in the Service Guide. My laptop took advantage of this Crucial memory to operate at faster speeds than the memory, I have now? What latency (CL) cases? I saw sticks to new Egg with CL = 9 instead of this Crucial CL = 11. CL is important? What I have to buy two Crucial 4 GB sticks or I can I keep my original 4 GB stick and add a Crucial 4 GB stick for my 8GB? Is Crucial memory memory low density -something I've read elsewhere that I need? FWIW, a diagnostic analysis of Norton said that my current memory is syncing to 1067 ns.

    I have also these two links below for key USB PNY to a Best Buy nearby. The first stick of memory PNY seems to correspond to the Crucial memory card. Is - this low density memory PNY memory? And yet once, can I buy a single stick of 4 GB and add to my current 4 GB stick? This 4 GB PNY stick below which seems to fit the profile of Crucial scan is what I would buy if he tell you it's compatible, because I can buy it at a Best Buy near and easily return it if it does not work:

    And here is the link to a second best buy PNY 4 GB stick whose plug appear to be closest to the Service of Guide specifications, but this stick may not be low voltage and it has less maximum MHz:

    Thank you for your help and your recommendations!

    Hello.  I'll answer my own questions in the last post above.  Fortunately, HP expert Paul Tikanen resolved my questions in a thread with the following response.  Thank you, Mr. Tikkanen!

    "The faster the memory will run in your laptop is at 1066 Mhz, which is the speed of the FSB of the i5 - 450 M.


    So, my recommendation would be for you to buy a module of memory 4 GB DDR3 PC3 - 10600 (1333 MHz).

    Thus, even the 1333 MHz chip will only work at 1066 MHz.

    I had a lot of success with this configuration of brand and the memory chip.

    Regardless of the brand you download, make sure he's 8 the little black chips of memory on each side of the Board, not 4. ".

  • Help upgrading RAM for Satellite S50 - B - 15 p


    I have a Toshiba SATELLITE S50 - B - 15 p and want to upgrade the RAM. There are currently 8GB. I read that 16 GB can be installed

    Memory locations need two, one with 8 GB inside and a vacuum?
    If so what memory for I order, for example this one

    If this isn't the case, please advise.

    I am currently regularly maxing out the 8 GB of RAM with my use if necessary

    Thank you

    Message has been changed: links to commercial pages are not allowed

    You are right. Your laptop model can be improved up to 16 GB and you can use the modules of memory 2 x 8 GB with PA5104U-1M8G part number. According to mobile information a slot must be empty, you can add the second 8 GB of RAM.

  • Question about upgrading RAM for a Satellite A110-133

    The following ram would work on the laptop mentioned above?

    Kingston KVR533D2S4 / 2 G 2048 mb so-dimm, 200 pin

    Thank you.
    Any input would be appreciated


    This page might be useful for you:

    You need DDR2 533 MHz (PC2-4200) 200 - PIN SODIMM barrettes.

    But I doubt that the Kingston KVR533D2S4 / 2G 2048 mb would be fine because the A110 can be upgraded up to 2 GB, and in this case, you can only use 2 x 1 GB RAM modules

  • I'm confused about upgrading RAM for Satellite M40X-119


    I want to improve my ram... its 512MB now, but not enough, now use 468 MB, I farm programs unused backgorund, always 468 MB to help... I also have virtual memory settings. Using virtual memory, not good at all. On games share memory with graphics as chip RAM you have many know... It will count if I switch 1 GB of RAM to the memory expansion on the rear panel on my laptop? I don't know what RAM to upgrade, works DDR or DDR2? How many MHz? What pin?

    I have little time know what is the capacity of my memory expansion module to the back of my laptop?
    If I add DDR2 it'll work with other main ram which is under the keyboard area..... ?

    Thank you much for now :)


    You must use PC2700 DDR - RAM. DDR2 will not work in your notebook.
    Have a look here: oshibaShop = false & SelCategorie = 4700 & tab = 1 #1

    Good bye

  • HP ENVY Phoenix 810 - 370st: upgrading Ram for my HP ENVY Phoenix 810 - 370st

    I have 16GB in my HP ENVY Phoenix 810 - 370st, with room for another 16.

    I've been looking for affordable options to upgrade, but does not know how much pine should I get?

    It seems that the most common options are 240 and 204... or was a Dyslexic? Is there such a thing as 204?

    I need to know EXACTLY what kind of RAM works for my computer. Thanks to you all.


    The modules are 240 pins

    Specifications of the motherboard, IPIWB-PB (Pittsburgh2) | HP® Support

    • The four-channel memory architecture

  • HP 15z-af100: upgrading RAM for HP15z-af100

    When I bought the laptop he had options for upgrading the ram at 6 or 8 GB, but I thought that I have he would treat myself.

    The laptop in question is the: model # HP 15z-af100 , product #L9Q95AV   

    I found a few Web kingstons site but thought I would ask here on anything else I should know before ordering?

    I was going to go with a 1600 mhz , 8 GB kit (one dimm).  Kingston HX316LS9IB/8 is the stick that I would order.

    Shown here, 3rd from the top.

    IM also trying to find a sheet of manual and technical HP 15z-af100 user if you could point me in the right direction. The plant seems not the have not included :/

    Thank you very much!!

    The ram I bought with faster timings works very well.  Thank you.

  • Upgrading RAM for Compaq Presario Cq62-215dx laptop Pc

    Hi, I want to upgrade my ram to my laptop and was looking for help to find the best things of Rams. Im having trouble finding everything and do not want to spend my money on the wrong thing, any suggestions?

    Here are the specs of the laptop:

    MasterStone wrote:

    Hi, I want to upgrade my ram to my laptop and was looking for help to find the best things of Rams. Im having trouble finding everything and do not want to spend my money on the wrong thing, any suggestions?

    Here are the specs of the laptop:

    Screen size 15.6-inch 250 GB HDD Type number 802.11bgn Wireless USB 2.0 Ports 1 battery average life (in hours) 5 hours
  • Pavilion DV6: upgrading RAM for Pavilion DV6

    I'm looking to update my RAM and would appreciate any help in determining what to buy to upgrade my RAM full system. It is a product B5S11UA #ABA Pavilion DV6, totally stock number. I think that the vehicle currently has 6 GB of RAM. Thank you!


    It's a HP Pavilion dv6-7010us and Yes, it currently has 6 GB of RAM. It supports up to 16 GB in two locations (8GB) and accessible/extendable user. Please use the manual next (page 4) for work on the configuration of your need and go to page 51 to find a part # and how add/replace RAM

    Kind regards.

  • Upgrading RAM for E17 - E5 - 773 G - JA

    Hi guys,.

    So I recently bought a new laptop, thinking I'll upgrade them over time as I usually do with my gear. Apparently this isn't the best idea when you want (some?) laptops if you do not do your research. The laptop was offered for $600 instead of the usual $700 - $750, so I couldn't pass it.

    The particular problem with this laptop is: it is incredibly slow, thanks to both the standard hard drive and the meager 4 GB RAM... which is a shame, because it has a Core i5-6200U which should be pretty snappy.

    If he ends up by I can only improve the reader (it seems accessible, although that stuck in where no normal screwdriver went before) then so that it is, he will still for a large speed boost.

    The problem here lies in the fact I already bought the RAM and won't go back until I know that I can't upgrade the laptop myself, or at all - in case the memory is soldered on to 100%.

    For those who know what the computer laptop innards look like, when the tank is open until you will see 2 cables in the Middle as suicidal traps if you opened to the top of the enclosure too strong. Black flat cable seems vital and glued in place, so that the white/grey cable seems detachable. My thought is that there is a chance of memory banks being present on the underside of the motherboard... or they are welded, in which case my adventure ends.

    Of course I could have bought a laptop computer with more memory or a SSD already mounted in place. The idea was to stick it out 6-12 months, up to the largest size SSD come down in price and choose first update memory. Also my experiences with laptops is that they have a lower lock or the easily removable bottom plating that exposes the reader, the RAM module and a Wi - Fi connection. Lesson learned here.


    -The mobile individual has locations for DDR3L 1.35v memory modules or is existing memory soldered in place? I forgot something? So scalable, how can I remove the ribbons, especially the black ribbon, without damaging it?

    -Do not remove the back part of the lower shell cell phone? If it isn't, by unscrewing the motherboard will be a fight with tools that I currently have.

    -Did someone tried to replace the drive in the laptop and how did you go to this topic with removal of screws? I noticed at least 1 screw on the side that cannot be twisted unless you use some kind of tool to transfer 90 ° twist screw (don't know the name of it)

    -Not related to the topic: what would be the cloning tool better to actually clone the original disc work? I have heard some horror stories about the UEFI/BIOS can't see not the clone due to the identifiers of order and whatnot.

    Thank you!

    1600 DDR3L 1.35v, Max is 16 GB, 2 slots

    Acer memory reference numbers

    SODIMM 2 GB DDR3L 1600 ACR16D3LFS1KBG / 2G KN.2GB0G.045

    SODIMM 2 GB HMT425S6CFR6A-PB DDR3L 1.35V KN.2GB07.015

    SODIMM 4G ACR16D3LS1KNG / 4G DDR3L 1.35V KN.4GB0G.029

    SODIMM 4 GB DDR3L 1600 M471B5173EB0-YK0 KN.4GB07.023

    4G HMT451S6BFR8A-PB DDR3L 1.35V KN.4GB0B.034 SODIMM

    SODIMM 8G ACR16D3LS1KNG / 8G DDR3L 1.35V KN.8GB07.022

    The back of the laptop does not come off. The keyboard/palm rest detaches and the motherboard needs to be removed, because the memory is on the lower side.

    An SSD is easier even if you still have to remove the keyboard-based-wrists.

    You can replace the drive for an SSD, or you can install an SSD of m2.

    M.2 SSD Acer part numbers

    THE 128 GB SSD - M 6G RBU-SNS8100S3/128GDM.2 KN.1280L.011

    THE 128 GB SSD - M L8T-128L9G FW:H871201 6 G 228 KN.12807.010

    THE 256 GB SSD - M M.2 RBU-SNS8100S3/256GD 6G KN.2560L.010

    THE 256 GB SSD - M L8T-256L9G FW:H881201 6 G 228 KN.25607.010

    I use True Image HD in 2014 and it has never failed me.

  • Upgrading RAM for Dv6-3206AX? Maximum supported RAM

    Hi all

    I am in need to upgrade my memory of's laptop (DV6-3206AX). At the present time it is 4 GB and I thought to upgrade to 16 GB.

    The reason for this upgrade is, I work as a developer and use many technologies and software requiring a huge memory tell SharePoint, SQL Server, DMS systems. I tend to play with these technologies on my laptop and of course to learn and build solutions. Now 2013 SharePoint requires more memory, I would need to increase the memory of my laptop.

    My concern, I am not sure weather my laptop wouldn't support 16 GB or not? If so, then this high memoery would result in additional heating.

    Configuration of the laptop

    • AMD Phenom II N970 (4 c, 2.20 GHz/4 x 512 KB / 3.6GTs)
    • 4 GB RAM DDR3
    • DVD +/-RW double layer with LightScribe drive
    • 15.6-inch HD (1366 x 768) LED backlit BrightView
    • AMD Radeon HD 6550 (discreet, dedicated 1 GB)
    • 10/100/1000 LAN, 802.11 b/g/n WLAN
    • Dolby Digital Audio Advance with speakers Altec Lansing, Webcam, media card reader
    • 1 x HDMI, 1 x VGA, 3 x USB 2.0, 1 x USB/eSATA, 1 x RJ-45
    • AC adapter, battery, power cord
    • (Windows 7 Home Premium pre-installed) Windows 8 Professional upgrade.

    Any person who has knowledge or have already tried on similar systems, share your experience.

    Thanks in advance.



    You machine is not in the following list:

    Based on this, it supports ONLY 8 GB.

    A closer is:

    You can buy from them, or use the information to buy elsewhere.

    Good luck.

  • When upgrading RAM for HPE-350 t; 2GB or 4GB DIMMS?

    I am running a HPE-350 t with 6 GB (3x2GB) RAM with a connector DIMM 240 pin available. I am considering adding a DIMM 2 GB of RAM or a 4 GB DIMMS in the open location. My vendor of choice for the DIMM suggests part of the OEM of only 2 GB of RAM compared to the 4 GB option to ensure compatibility. However, I like to pop in a 4 GB RAM DIMM If and only if, my computer would be faster and more efficient than adding only a 2 GB DIMM with No compatibility issues. Note: I do not know why my provider does not list a part OEM 4 GB DIMM for HPE-350 t, but apparently it does not. (This model supports up to 16 GB of RAM configured as 4x4GB DIMM, a manufacturer OEM 4 GB DIMMS must be available somewhere). However, the fact seller enter a part comparable 4 GB that it lists as a PC3 - 10666 DDR3 - 1333 Mhz 240 pin DIMM I think that work pourraient very well.

    A corresponding 2GB DIMM module added to the #4 slot would cause #3-4 DIMM locations to work in dual mode? If so, that would give me a greater efficiency than the addition of 4 GB? I wouldn't mind saving some money, but if the 4 GB would give me more power to operate than the 2 GB, I'm willing to spend the extra money. Otherwise, I guess that just increased 2 GB would be OK, especially if this would produce #3-4 DIMM slots to work in dual mode and increase my performance system equal to, comparable or superior to the option to upgrade to 4 GB, thus saving me money (and headache as possible of the added 4 GB of RAM not working not not for any reason any) (, because it wouldn't be a matching pair to the 2 GB DIMM in the location #3)

    FYI, I'm currently running:

    Name of HP: Iona-GL8E Motherboard with PC3-10600 DDR3 - 1333 Mhz RAM (16 GB max memory of 4x4Go)

    Intel Core-i7-860 Quad-core CPU

    WIndows 7 Home Premium 64 - bit OS (supports up to 16 GB of RAM)

    BTW, my choice provider identified the RAM I need like PC3-10666 versus the PC3-10600 listed on my computer of packing slip and mother HP map features page. Do I need to worry about this? Is it a typing mistake, or are they compatible? If not, what online provider would you suggest for a fully compatible part?

    Any advice would be grealty appreciated.

    I don't think that you have really understood what I said.

    Be aware that when you add the 2 GB memory module if it is not in all respects identical to the other three modules you desktop Pc is probably not start Windows. It's the most critical thing of all to pay attention to if you do not like disappointments upgrade memory.

    Good luck.

Maybe you are looking for

  • shortcut icon

    . When I create a shortcut to a URL, how can I make firefox use the icon of this site, rather than the icon of firefox genaric?.

  • Musicas compradas no problema DAO game Google

    I bought musicas e albuns not Google games e elas vem em formato MP3 320 Kbps. Ao synchronise com o Itunes e Ipod Classic 160 GB, a most das best cortam os segundos finais. Geralmente quando falta 0:25 to 0:35 para acabar an ela corta age.

  • Anyway I can get rid of the need to enter the password in Windows 8.1 pro

    At the start of my system? It's a daily pain because I have to ask my tutor to kick it to me because I am disabled and that you do not have my voice recognition software running until I connected to the system, and of course I can't type so...

  • How to play MP4 file via Windows Media__ Type

    Hello I burned the songs on a dvd and they are in MP4 format. Windows Media does not recognize this file format. Is it possible to add this list of Windows Media format or will I have to install another player to play this file format. If I have to r

  • Cannot find valid printer URL to add a printer for windows machines

    To make it work fine in linux mint, I had no complaints there.  The problem is that I am installing this on a corporate network with a system operating heterogenious environment. Here's what Linux Mint uses to connect to the printer: [code] HP: / net