Streaks on scan by feeder

Similar Questions

• DeskJet 3835: Scanning Doc feeder does not

  Hi, I recently bought the above printer, abd despite it saying "automatic document feeder" on the box, when I try to scan a document, it scans only on self by dish/glass but usually feed the document in. It's very frustrating because I sometimes large documents to analyze and to place manually every page on the glasstop is extremely laborious. Please tell us how to get the ADF to work.

  Thank you.

  PS. I installed the latest drivers. (Full feature software and drivers)

  Hello

  Thanks for your comments.

  1A the user interface of your scanning similar to what was shown in the video?

  2. have you selected the source to be "Use when loading document feeder"?

  3. do you have a "ding" sound when you place the document into the document feeder?

  To let us know.

  Thank you.

• scan doc feeder perpendicular black strip.

  My HP Officejet Pro 8630 scans a black band perpendicular Sun BUT only in the doc feeder.  The band is not physically printed on the document when it is scanned.  Charger doc copy perfectly, and scanning flat is perfect.  How can I fix it?  Hope I just clean something.  Curious to know why the driver alone doc - it is not a scanner separated is - this?

  Hello and welcome to the HP support community!

  A black band that appears when the upper tray is used is often due to a tiny grain of dirt or paper that is stuck in the narrow window that is right outside the window flat.  The scanner, camera itself parks in this slot, while the paper feeds past.

  Look for the band to the edge of the bucket.  Use canned air to blow everything that can be stuck there.

  I had this case with my HP AIO printer before and found the answer here on the Forum!

  WyreNut

• 8500 a fail scan document feeder, even if the 'Original chargé' indicator is on

  My four-in-one is a HP Officejet Pro 8500 A910 Premium a

  My OS is Windows 7 64 bit.

  I use Adobe Acrobat to scan documents, and until recently, the process went well:

  1. Insert documents into the document feeder
  2. Printer sounds a chime, and touch screen says "charge Original."
  3. Click on 'Create document from the scanner' Acrobat software
  4. Pages are drawn from the feeder and scanned

  This is how it has ALWAYS worked, until recently.

  In the last few days, however, the process has changed. The first three steps above, are the same. However, step #4 is now:

  4. the pages in the document feeder are ignored

  (there is no sound indicating that the document feeder is enabled)

  and analysis follows the scanner flat glass

  Note that if I scan from an application that allows me to specify whether to use the flat glass OR the document feeder, the printer works properly. In other words, I can indicate that the documents are in the sandbox, and they are then drawn away and scanned.

  Note also that if I run a scan of the touch screen of the printer (rather than Adobe Acrobat), it works correctly.

  And finally, if in Acrobat, I said that the scanning process should show "native interface of the scanner" then I can specify "Document feeder" and the scan works properly.

  But until recently, I could get Acrobat "hide the native interface" and scans would work.

  It's like there is a "source of default document" in the scanner preferences somewhere, and the default value has been replaced by "flat." But if there is such a context, I was unable to find it.

  What help can offer you?

  Problem solved!

  HP support has determined that it was not a printer problem. They suspected a problem with Adobe Acrobat.

  With the help of Adobe Acrobat Tech support, I discovered a corrupted installation of Adobe Acrobat file inside on my computer. Removing and then reinstalling Adobe Acrobat has solved my problem.

• Scanning from feeder OfficeJet Pro 8500 has

  I tried to search several times but I can't seem to find anything that addresses this specifically.

  I'm trying to scan multiple pages on my OfficeJet 8500 a on a machine running XP.  I deally I would that they in a single file, but if not possible I can deal with that later.

  However, unlike other scanners XP, I used, there no option to select the tray as the source.  This doesn't seem to work when you try to scan directly from the printer.  Instead, I get a blank image scanned from the glass, and no paper is fed.  Documents (a stack of 9 or more) * are * inserted in the charger as they should be, as much as they are when I copy successfully all the time.

  Please tell me it is possible to do - it seems like a no-brainer.  What I am doing wrong?

  Well, it works now.  Don't know what I did differently, but there you go.

• Streaks on scanned Documents

  All pages that are analyzed (copies & probably faxes) have the same bright streak. Glass and other components are clean. This isn't a printing problem, self-test page is fine. Time for a new all-in-one printer?

  If you are considering the purchase of another printer, so I recommend giving HP Technical Support a call.

  HP technical support has a upgrade program by which you can get a newer refurbished model HP printer (of type for your current model or an upgrade serial), with a full factory warranty, at a discounted price compared to the new sale to retail.

  If you are in the USA / Canada region, then the number to dial is 1-800-474-6836.  If you are not in this region, click here to access the Global Support HP contact list.

• Multifunction Color LaserJet Pro 200: blue line when scanning from feeder not dish

  When I scan from the charger, I get a blue line that spans the length of the document. It does not happen when I scan from the tray. any suggestions on how to fix?

  Thank you

  Hi @Pichopop,

  Welcome to the Forums of HP Support! I read your post and see that you have found a blue line, during the analysis from the ADF. I will definitely do my best to help you. If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

  What is the name and the product number of your printer? How can I find my model number or product number?

  There are several models of Laserjet 200 series.

  Make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector) This ensures that the printer is full on and can help this situation. Poor power connections can cause problems of copy and scanning and rejection of the toner.

  Here is a document for the cleaning of the glass and Platinum. You will notice that there are two areas for the glass, one for the dish and the other is for the ADF.

  • Copies, faxes, or Scans have Vertical black and white lines to the exit.

  Do not take into account the model and the title. Proceed to step three: clean the glass and Platinum sweeping.

  Please let me know the results and if there is anything else I can help you. Thank you.

• streaks

  Hello, I have an officejet pro 8600 and the streaks of scan all colors when I try to scan a jpg. It doesn't happen when I print in pdf. Ive done the diagnosis of the print cartridge and it made no difference. Thank you

  Hello

  It happens when you scan or print a JPG file?

  What are the results once a copy of the device?

  If the same thing happens when you copy, you'll see a ny difference directly connect the power supply to a wall socket without bands of all power, extensions, or a surge protector?

• HP5740 all-in-one: HP5740 will not pull the paper on the charger or scan

  I can't get my printer to scan or feed paper either to the fax or scanning. Can ' t use the glass to analyze either. It goes through the process, but the screen continues to say "scanning" when he is not doing a thing. Ran the HP doctor 5 times less installed reinstalled, trendy unplugged. Nothing seems to work.

  Hi @kerasou,

  At this point, I'll recommend that contact HP for assistance. Because your printer is only two months, it will still be under warranty.

  Contact HP:

• Black line copy/scan number Officejet 7500 has

  OfficeJet 7500 has. When do face or scanning through feeding, copying or scanning has a vertical line from the top to the bottom, near the Center. When explorations or copies are made from the plateau, this line does not appear. We have cleaned the rollers and separator, but we always get this line in the middle. There is also no line when we print from the computer... Please advise as this is a brand new computer.

  Hello Ivrwm

  I hope that your trade goes well. If you have any other questions please post back.

• Scan of the Bundle chain by name

  I would like to take the output of "channel Scan and feed in a bundle by name.» There is no existing group so I wonder if I can use a constant of Cluster for the cluster of the entry. If so how the cluster constant is defined.

  My goal is to read strings ini file sections, split names and boundaries and put them in a cluster or array of clusters that can be stored as inhabitants of TestStand or FileGlobals.

  Thank you

  JVH

  jvh75021 wrote:

  There is no existing group so I wonder if I can use a constant of Cluster for the cluster of the entry. If so how the cluster constant is defined.

  There is something very common to do during initialization - group things upwards into a cluster and carry it around to use throughout the program, in sub - vi, etc.. I am happy that you are not only throw all in local or global sections!

  Yep, you will use just a constant Cluster across the first time it was packaged. Take this constant initial cluster, simply create your cluster of output known > constant. So to answer your question, the constant of cluster is defined by the known output.

  However, if this cluster ever changes during development and it will be , you are going to change every single cluster within sub - vi and an initial constant... or... you'll accompany Ben to advise and do a TypeDef!

• OfficeJet Pro 8600 N911a: Can print / copy in colour, but not black

  Last night, tried to make a copy of the Officejet directly black and got a page of black streaks almost completely dark.  Tried to copy the same document in color and got a nice copy.

  Today, I tried scanning a document from hp on my computer software.  Got the same streaks.  Scanned in color and got a good clear scan.

  It may be dirt on the glass which would affect color and black too, right?

  Grayscale printing is fine.

  How can I solve the problem?

  No worries on forget everything shuts off and turns back on.

  I saw the power of the printer and the new solve a lot of problems, but it's the first time I've seen do so solve the problem with black streaks.

  One thing that I would check if it happens again is to make sure that the printer is plugged directly into a wall outlet, not a surge protector. Copy and scan functions can behave a bit strange if the printer does not have enough power.

  I'm glad that you all fixed. If you need anything else please let me know, otherwise have a great day!

  If this solves your problem, then please help others find this post by clicking on accept as Solution on my post.

  If you appreciate my help, so please let others know by clicking on the icon below my post thumbs up.

• Useful general troubleshooting for printers papers.

  I thought I would take the time to compile a list of documents useful generic troubleshooting.  These documents do not have the specific steps for each printer, but they did not for most printers.  Remember that it is always better to use documents with specific steps for your printer, but these will do in a pinch.  Enjoy.

  Failure to scan

  http://support.HP.com/us-en/document/c00587971

  Fax error codes

  http://support.HP.com/us-en/document/buu02549#

  Noisy printing

  HP Deskjet printers - cleaning and care of the printer http://support.hp.com/us-en/document/bud09248

  HP all-in-one and the family of Fax products - all-in-one http://support.hp.com/us-en/document/buu01831 of cleaning

  Setting up scan to E-mail in Windows 7

  http://support.HP.com/us-en/document/c01796777

  Lines or streaks in scans

  http://support.HP.com/us-en/document/c01612462

  Multi-page power

  http://support.HP.com/us-en/document/c00190540

  Install another driver

  http://support.HP.com/us-en/document/c01796821

  Printer does not prevent the wireless settings

  http://support.HP.com/us-en/document/c02790693

  Printing blank pages

  http://support.HP.com/us-en/document/c01892627

  Printer has no power or does not meet a key

  http://support.HP.com/us-en/document/c01321436

  The product makes noise when printing

  HP Deskjet printers - cleaning and care of the printer http://support.hp.com/us-en/document/bud09248

  HP all-in-one and the family of Fax products - all-in-one http://support.hp.com/us-en/document/buu01831 of cleaning

  Ink system failure

  http://support.HP.com/us-en/document/c01458034

  These are all generic documents that I could find for now.  As I find more, I'll add it to the list.

  Hope these helps.

• 8500 A909G - Feeder causes black streaks on faxes/scans/print jobs... ONLY when you use the charger

  Charger cause black streaks on faxes/scans/print jobs... ONLY when using the charger... If I put something on the glass and printing fax/scan/or it... everything's fine... it was ONLY when I use the charger... did someone come up with a solution to this problem?  Looking at the other reports, it was NOT those that have been fixed... I hope that someone can help me solve this problem, as it was NOT a printer not expensive to buy...

  I'm sorry you have a problem with the vertical lines in the ADF.

  Try to clean with water and lint rollers. There is also a glass of small strip (rectangular) when you lift the lid. Also clean.

  Here is a link that can help you too.

  http://support.HP.com/us-en/document/c01618140

  Let me know if it helps.

• HP Officejet Pro 8600: Document feeder causing vertical lines in copying and scanning

  When I copy or scan via the document feeder I get two vertical lines on the copy or scan.  How can I fix it?

  Hello @aadmin, hope you are well!

  Thank you for becoming a member of the HP Forum. It's a great place to get help from the community, to get suggestions and find what has worked for others.

  I understand that you are facing problems while scanning / copying using the ADF. Please, try the following steps to resolve this problem.

  1. Make a blank copy using the ADF. Ideally, you should get a blank document with the two vertical lines.
  2. Keep the page out on your dish / the main scanner bed facing you.
  3. Follow the line or streak on the paper to the box on the ADF glass is the origin of the problem. Carefully clean the thin "strip of lid of scanner ADF white' and 'the band glass ADF Scanner' with a damp lint cloth.
  4. See the figure below. 3 is the glass Strip ADF & 2 is the white cover ADF scanner.

  

  These measures should be the case, I would like to know the results.

  See you soon

  Please click on 'acceptable' on the post that solves your problem to help others to find the solution. To show gratitude for my help, please click the 'Thumbs Up icon' below!