Pavé tactile/point

Similar Questions

• Pavé tactile Lenovo G510 help please

  Hi all

  Recently got a new laptop - Lenovo G510, 4700 i7, 12 GB ram, 500 GB SSD, new installation of 8.1 and all updated with the latest Windows/lenovo drivers. (add more RAM and new SSD myself - but the problem I was always present on the previous hard disk of 1 TB).

  All right, fast and I am happy with the exception of one thing annoying reallly I spent hours trying to find a solution to 95% for = the touchpad!

  When I scroll down on the touchpad... it... the page / screen scrolls upward!
  I refer to the edge of the right side of the touchpad with a finger.

  On any laptop I've had there was a setting where I can check/uncheck an option of scrolling so I can put it as I want - but this Lenovo uses Synaptics Touchpad v7.5 drivers and I can't find such a setting on the finger of a scrolling tab.

  I uninstalled the drivers simply use the windows drivers, but it gives no option, no scrolling and a jerky cursor = no good.

  I tried the Synaptics W7 drivers and it's all as well as the current 8.1 drivers.

  Drivers Lenovo Web site page there are 3 riders: W7 and W8, W8.1 - I tried all.

  I'm lost! I can't find a way to do such a thing simple... I want to be able to do is scroll down like I did for years and see the page down scrolling in the same direction!

  I posted this on another forum too and not had a solution yet, sent either support from Lenovo and no response.

  I know it's only a trivial thing and I should and could get used to it eventually... but I don't want to - my OCD won't let me - I want to establish this exactly how I have implemented any other computer laptop I have ever used.

  Oh and yes I have google and google and google!

  I watched a lot of solutions for the other similar/same problem, but they all seem to point to momentum/Elantech drivers but this laptop G510 only uses the Synaptics.

  If I'm stuck with it? I would be very grateful if anyone can think of any hack / / workaround solution, thank you.

  Dan.

  Can try again you? (re-upload)

• MacBook Pro 13 beginning 2015 Trackpad problem

  My Macbook Pro 13 beginning 2015 Track-pad has a problem, pavé tactile-jumping and clicking on and open programs and create folders and open the settings with a click me.

  This article will help you If your pointer is nervous when you use a trackpad, Magic Trackpad, Magic Mouse - Apple Support

• the movement of the unusual cursor while typing in ms word

  While typing in ms word, cursor suddenly moves to another location and start typing there. Therefore, I need to see my monitor hit every time as I type. In addition, it makes my slow typing because of spending a lot of time to return the cursor to the original postion. He bathering me. I went to the section mouse of the heart for the edition Control Panel to change the pointer option. It don't did not help me.
  I use windows vista home Edition. I have MS Word 2007.
  Thanking you in advance for the help

  Hey,.

  If the Touchpad is too sensitive and even the slightest brush of the hand or sleeve (wrists) causes the laptop thinking that you "click the mouse". This makes the insertion point jump to where ever the cursor is being located. What you need to do is to go into the setup for the Touchpad and disable the mouse click simulation or change the sensitivity of much lower. that is, if you go to control panel, mouse, you should be able to change the sensitivity of the touchpad or disable the function 'click '. Or if you have an attached external mouse then just turn it off. Reduce the sensitivity option low and verify if you are able to work with Word normally.

  Insert a USB mouse and check if you are facing the issue. If it works great, I recommend you contact your pavement tactile manufacturer for additional support.

  Kind regards

  Yama - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Y500 two-finger-tap touchpad not working not

  Hi I bought my Y500 a few happy days with her and there are in general. However, one day the two le deux-doigt-tap (par clic droit) sur le pave tactile - finger - tap (by right-clicking) on the touchpad stopped working. Here is a description.

  Everything else as far as I know, including the two fingers scrolling and the tap of a finger, etc. work well, but the tap two fingers stopped working even though it worked fine for a few days. I have a suspicious as to what caused it, but I'm not entirely sure. In any case, I think that it is probably a bug and probably software. One day I went into 'control panel'-> 'mouse'-> 'device settings'-> 'settings... '. "->"Scrolling"->"two fingers to scroll"->"enable cabotage. I played with the cabotage for awhile and soon off again because I don't really like it. However, that's when I noticed that my tap two fingers stopped working. I have double checked that 'control panel'-> 'mouse'-> 'device settings'-> 'settings... '. "->" by clicking on "->" click two fingers "is set on" secondary click (context menu, drag special) ", but the click two fingers still doesn't work, even after a reboot. I downloaded the latest driver (version 16.2.18.0) and it still doesn't work. I uninstalled the driver and installed it again and it still does not work. Now, I like to use the touchpad, but really hate to live without tap with two fingers for a right-click. Please help me with this, I thank you in anticipation.

  It seems to me a solution, but I don't know exactly why he has solved the problem. It seems that the problem might be that while the Synaptics touchpad device is a PS/2 device, it keeps software interference (of some sort) by being recognized as a SMB (System management bus) device. Which solved the problem for me was to go to 'device manager'-> 'system devices', locate "Synaptics SMB driver", and either disable it or remove it. The two-finger-tap touchpad must begin to work immediately.

• 13 x 2 Pavilion: pavilion 2 x keyboard suddenly stops working

  Suddenly, my keyboard doesn't work after a cold start. The touchpad still works so I am able to move the slider autour, but none of the keys on keyboard activity. All about the Tablet seems to work from a tactile point of view. Reading another post on this forum suggested to uninstall HP System Event Utility, then reinstall using the link provided in the solution. However, the installation was interrupted due to the incompatibility with my system.

  I've recently upgraded the operating system of Win8.1 to Win10, but returned to the time where I ran out of memory on my 64 GB ssd. I did a week ago and everything worked fine except that it seems to take more time to do a cold start or restart. Not sure if this is related or not.

  HI @cyrm,

  Welcome to the HP Forums!

  This is a wonderful place to find answers and information!

  You have the best experience in the HP forum, I would like to draw your attention to the Guide of the HP Forums.

  Learn how to post and more

  I understand that your keyboard does not respond.  Why did you move to Windows 10 but returned to 8.1 of Windows due to lack of space on your SSD 64 GB.  Now your (virtual) keyboard edge works very well so you are able to navigate, but the physical keyboard does not respond.

  Have you checked the connections during the docking of the keyboard to make sure that they are aligned and course?

  After return to 8.1 Windows do you have all your Windows updates?

  Did you run HP Support Assistant for HP updates?

  When it is connected if you check device manager is the recognized keyboard and if so is there any mistake about it?

  If you connect an external keyboard work?

  Here are two links that should help you.

  HP - computer keyboard laptops laptop troubleshooting (Windows 8)

  HP Notebook PC - detection of hardware failures (Windows, 10, 8)

  If it must be a hardware problem, please contact HP support for service options.

  Contact HP to Contact HP Support assistance

  Please click the thumbs up below to say thank you for the answer.

  If this helped you solve your problem, please choose the solution provided in order to help others.

  Good luck!

• Impossible to use the DVI - D port with cable DVI - D Pav 500-100 a to HP W2207 monitor

  I have a new standard of factory Pav 500-100a without mods.  HP w2207 monitor.

  Currently properly connect with VGA DVI - D port with the adapter supplied with the pc.  I have install Windows Update 8.1, put in my files from my old PC and everything was fine except the video is not very good.

  I got a formwork of cable DVD, but it's a DVI-I have the cable.  It took 5 minutes before windows comes up and then whenever the background picture changed in the theme which he suspended for a few seconds.  I read that I have a DVD-D need cable which i purchasd today.

  The package says it's a CL-DVI2M - DVI M/M 24 + 1 CABLE 2 M.  The tech in the store said that it is a good calbe and works perfectly.

  When connected and power until I get the hp and rolling points logo, then it turns off.

  I reconnect the cable VGA and all its beautiful - using the VGA to DVI.

  I ran msconfig and turned from secure boot - restarts and comes well in safe mode.  I set the resolution of 1280 x 800 and rebooted and reconnected the cable DVI - Virgin again.

  If I put the cable VGA back inside fine boots.  The monitor was given factory and seens the DVI connection but Windows remains empty. Also tried to start first with no cable - connect the DVI and the monitor remains in sleep - be able to reset the monitor and still a Virgin is also no connection DVO.

  I have fI switch with connected DVI I can get to the BIOS, and I see the HP logo and the points Win 8 starts.

  I don't know what else I can try.  I have no other usable with DVI video card

  Any ideas out there?

  Pls help - Steve

  Although I am an employee of HP, I speak for myself and not for HP.

  Yes, I rasthaus the monitor and cable of my older Compaq running xp and all fine on DVI.  The monitor and cable are fine.

  Since then, I've had a product in Australia specialist help.  Tried all the previous things, then initially went to check if the person had been doing the right thing - connected the VGA monitor with the supplied adapter DVI-d port - which has always worked well.

  Went to Device Manager o and removed the video card adapter. Powered off and then attached the monitor directly with DVI and it started late! Drviers reinstalled and updated and now I have nice crisp clear video appears.

  Something of the support person should apparently have - insead has asked me to wipe the hard drive and restore the factory system, replace the cables, buy a new monitor... was even asked to leave VGA mode and do not use DVI!

  Thank you for your help, Dave, its good to know that you are around to help us.

• HP Pav 1EA 15-ab219TX: download stops at 320Mo

  Hi all

  Recently I bought HP Pav 15 - ab219TX cell phone 1EA. Save this model is really good.

  But I noticed that in this cell, maximum I can download files of 320 MB size (or) it stops at 320 MB if the files are located in a larger size. (Please note there is that any problems with Torrentz download regardless of their size).

  I used different browsers as Firefox, Chrome, Safari, IE. Also, I used download managers such as Orbit, IDM, download mgr etc. But the question is always the same. Please someone help me know what exactly is the issue and helps me get this sort.

  Thnaks,

  Aashish

  AashishHP wrote:
  

  Thank you very much for the solution. After cleaning of temporary files and increase the space, the download is now stop at 640 MB instead of 320... (IE his double now).

  Something else I am missing out?

  You may need to get the browser support page and see where you can remove the buffer limit or increase it to allow you to download it. If at this point, it is no longer a matter of user hp but a browser you need to communicate with them on this subject.

• the arrow pointer is stuck

  The arrow pointer is stuck in the middle of my screen.  Everything worked very well this morning, and then the cursor quit moving.  Any thoughts on how to make it work again?  I have a laptop Lenovo G530 with a tactile mouse.

  Thank you.

  Dave

  Have you tried to see if it moves the pointer of the mouse?  If Yes, then the trackpad's damaged, defective, or turned off.

• "Greater than or equal to ' searches on pavement

  How can I implement a search "superior or equal to ' on the pavement?
  
  I created a Btree that allows keys duplicated like this (I'm using Python and pybsddb ):
  
  db_object = db. DB (DBE)
  db_object.set_flags (db. DB_DUP | DB. DB_DUPSORT)
  db_object. Open (define_primary_db_name (primary_db_name), None, db. DB_BTREE, db. DB_CREATE)
  
  The keys are a series of integers, which here is a partial list (before they are inserted into the Btree, they are converted to strings):
  
  ... 90700, 91500, 91900, 92500, 93159, 94500, 94700, 95300, 96400, 97779, 98600, 98900 99900, 100000, 101900...
  
  I would like to be able to question the Btree amount and get all values is greater than or equal to a specified amount.
  
  I wrote a function to open a cursor, point to the first value using DB_SET_RANGE, and then iterate (via DB_NEXT) until the end:
  
  def greater_than_equal_to (amount):
  AMT = int (amount)
  [data =]
  CUR = db_object.cursor)
  REC = cur.get (amount, db. DB_SET_RANGE)
  If rec:
  Data.Append(Rec[0])
  all REC:
  REC = cur.get (amount, db. DB_NEXT)
  If it's not rec:
  breaking
  If int(rec[0]) & gt; = amt:
  Data.Append(Rec[0])
  cur. Close()
  return data
  
  But when I tried, I got only some, not all, results that I wanted, like on this model:
  
  % greater_than_equal_to('91500')
  '91500', '91900', '92500', '93159', '94500 ', '94700', ' 95300', ' 96400 ', ' 97779', 98600', 98900', 99900'
  
  So, obviously, the requirement that the keys are strings has an impact on the results, since any key not starting not not by "9" is ignored by the cursor / call DB_SET_RANGE.
  
  Is there a way to get the cursor to look at the keys correctly (i.e., in the form of numbers) to make it work as I wish?

  Hello. Your analysis of the situation is correct, because your keys are stored as strings, functions of default comparison sorts 150000 before 9. In order to avoid a complete analysis of the database for your search, you will need to implement a custom comparer to tell BDB how to sort your data. You can find more information about it here:
  http://www.jcea.es/Programacion/pybsddb_doc/4.7.3/DB.html#set_bt_compare
  and here:
  http://www.Oracle.com/technology/documentation/Berkeley-DB/DB/api_c/db_set_bt_compare.html

  If all your keys are numeric, the comparison function must be simple, convert the two values and return leftKey less to rightKey. If your keys are not purely digital, design a correct comparison function will be much more difficult.

  Ben Schmeckpeper

• Power point

  Is there an outlet, especially for iMac computers or do you have to buy a Microsoft Power Point program which is compatible?

  Yes, there is a PowerPoint for Mac available from Microsoft.

• Just updated to Sierra and updated Pages at the same time. Now when I try to select a line of text I find myself with an insertion point where I stopped by selecting

  Today, I updated for Sierra and updated to the latest version of the Pages. Now I find that I am more able to select a line of text. When I try to do, I find myself with an insertion point where I stopped by selecting, but nothing is selected. This is a bug in the new version of pages or get my wrong settings?

  You use a Wacom tablet by chance?

  Solution: Press the shift key, just before stop selection. And Yes, that sounds like trouble in the Sierra.

• I'm looking for the third order intercept point

  How to find the point of interception of third order of my iphone 6? There is a sheet with all the technical specifications in relation to the my phone gsm modem. Thank you

  No, Apple does not publish or release this level of technical specifications to the public.  Since the 3rd order intercept is a purely mathematical concept for such low power as a smart phone device, I imagine that these kinds of data are unknown outside of Apple's own engineering group (or Foxconn I guess)?

• Point to the new terms of AGREEMENT?

  I've read and if all goes well digested the new conditions but could not find the usual point of AGREEMENT.   Sent an email too.   Cannot install latest iPad Apps - password for iTunes help refusal

  If iTunes does not accept your password, you may need to reset or. However that shouldn't happen without a valid reason. The button agree should be at the bottom of the window appearing in the terms.

  Did you try to connect on your ID Apple and then connect again?

• Software updated 2 days ago. He stuffed the speed up to a point, I had to borrow someone's HP to complete a task. Very disappointed

  I updated my software for macbook pro 2 days ago, which has been for his security etc.

  After the update my macbook snaps every minute and the speed it exceptionally slow to a point as I sit for 5-10 minutes waiting to open finder or safari to open. This update plush speed of my macbook. He now works at all. Display and all that remains is very good.

  I have an important assignment due this Friday, fortunately someone lent me their HP to complete my task.

  very sad and disappointed with this, Apple.

  Please provide a solution.

  Thank you

  kitss

  Download and view a report of Etrecheck:

  http://www.etresoft.com/etrecheck

  Ciao.