Pavilion 15-n205TX: Hotspot cannot be created in my laptop

Similar Questions

• recovery system cannot be created

  Recovery cannot be created

  What is next

• Satellite A100-998: Partition cannot be created with Paragon Partition Manager

  Tried to use Paragon Partition Manager 8.5 and at the request of partition received message "' new partition cannot be created without doubt all the main locations are occupied." " There are two partitions identified, logic (c) primary format 186GB and logical (*) primary unformatted 251 MB 2049,9 GB i.d. 0 x 88 linux partition 0free plain text table.

  I have not tried any operation since buying disk management. How can I get my space to put my newly acquired Vista? What effect deleting partition (*) will have.
  ]

  Hello

  I'll try to clarify the situation on your HARD drive. as far as I know your laptop comes with preinstalled a? Media Express Playera?. It's small? Linux-baseda? application and it is installed on the small unallocated partition (about 250 MB). Please leave it is.

  Partition is primary can be reduced by about 40%. Of these 40% you leave, you can install Vista OS. On this way, you will have two operating systems, and every time that you start your laptop starts a? Manager will ask you what OS you want to boot.

  When you start the installation of Vista installation program will ask you where the Vista must be installed. Choose please this second partition.

  Let us know the results.

• HP Pavilion 15-n205tx laptop: HP Pavilion 15-n205tx NotebookPC (ENERGY STAR).

  I want the driver for my laptop HP Pavilion 15-n205tx (ENERGY STAR) NotebookPC - .i want to install window 7 on my pc which already have everything in window 8.1 installation window 7 driver is required.please send me the link.

  Here it is:

  http://support.HP.com/us-en/product/HP-Pavilion-15-notebook-PC-series/6529948/model/6622561/drivers

  also

  Install HP Support Assistant that will automatically download and install updates/drivers:

  HPSA link:

  http://WWW8.HP.com/us/en/campaigns/hpsupportassistant/hpsupport.html

• FPGA Interface C API, error-63105, OR-RIO: C/C++ identifier is already in use and cannot be created.

  Hello

  Installation program:

  1 x the NI PCIe-7841R

  When I am trying to automatically generate a C++ API for my top FPGA VI using the FPGA Interface C API 12.0 I get the following error.

  Error-63105

  NOR-RIO:

  The "NiFpga_FPGATop_IndicatorBool_DMAFIFOtimeoutoccured" C/C++ identifier is already in use and cannot be created.

  Anyone know what this means? Is there some kind of limitation on the appellation of front interface controls?

  /Mola

  Problem solved.

  I had placed two flags with the same name on the front panel - by mistake. It builds the FPGA without errors, but the C API generator was not in favour of that.

  / Mola

• I upgraded my Vista Home premium to windows 7 ultimate, shortcuts on the desktop are not displayed, and can be created, or any folder cannot be created until the flash drive is reinserted

  during the upgradation he automatically took backup to an external flash drive, now every time I have to run has previously program I have to insert this flash drive.
  also all the shortcuts on the desktop are not displayed, and can be created, or any folder cannot be created so that the flash disk is reinserted

  Hi subhshy001,

  Welcome to the Microsoft Windows answers Forum community!

  Try this if you do not have

  Windows Explorer to create the folders and shortcuts in your document folder, drag and drop them on your desktop.

  If you have completed the steps and was not even useful,

  Follow these steps:

  Try to create a shortcut and sending it on the desktop.

  (1) open: Start Menu ,.
  (2) right-click: Internet Explorer icon .
  (3) select: send to > desktop (create shortcut).

  There should be a shortcut on the desktop .

  Make sure that the "show desktop icon" has a check against it

  OR

  Just click on the empty part of the desktop, choose new > then select the folder to create. Right click on this folder , select Rename it.

  If the steps above do not work then:

  You can scan your computer for malware.

  You can download, install and update anti-malware free of your favorite search engine and find malware.
  
  Important note: this response contains a reference to third party World Wide Web site. Microsoft provides this information as a convenience to you. Microsoft does not control these sites and no has not tested any software or information found on these sites; Therefore, Microsoft cannot make any approach to quality, security or the ability of a software or information that are there. There are the dangers inherent in the use of any software found on the Internet, and Microsoft cautions you to make sure that you completely understand the risk before retrieving any software from the Internet.

  If the scan comes back clean, so I recommend doing a System File Checker too l to analyze your OS system files.

  To help resolve this problem, use the tool (SFC.exe) System File Checker to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. open an elevated command prompt . To do this, click Start , click principally made programs , Accessories , right-click guest , and then click run as administrator .  If you are prompted for an administrator password or a confirmation, type the password, or click allow .
  2. type the following command and press ENTER: sfc/scannow (Yes there is a space after sfc) the sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions. This analysis do take some time to complete.

  Hope this information helped!

  Thank you, and in what concerns:

  Aziz Nadeem - Microsoft technical support.
  Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think.

• When I try to copy a file to an external device using Windows Explorer I get the following error message: "cannot copy. The directory or file cannot be created. »

  original title: could not copy files

  When I try to copy a file to an external device using Windows Explorer I get the following error message: "cannot copy.  The directory or file cannot be created. "I understand that I may have the physical limit of USB keys for the root directory.  How can I fix it?

  Hi GloriaZF,

  What is the size of your external hard drive and what is the available free space? Open my computer-> right click on the external hard drive-> properties. You will not be able to copy more data if the disk is full, or who have less space compared to the size of the file you are trying to copy.

  You need to remove the order data to make the space more. Deleted data from the device USB will be permanently deleted and will not be stored in your Inbox, so take care while eliminating unnecessary data.

  I hope this helps.

• Save failing - a snapshot cannot be created, disk space, error 0 x 80070070

  My automatic back keeps having failed, a snapshot cannot be created, not enough disk space, this is the message that appears error 0 x 80070070, I cleaned my computer as much as possible, but I still get this message, please help?

  What s the size of the HD and how much is free?

  You cannot delete the old fules and so whenever you perform a backup he'd fill the HD

• ad-hoc cannot be created

  Hello

  I want to do a special in windows 7 that I'm setting an ad hoc network profile after all he says "ad hoc cannot be created.

  Why is this?

  Hello

  Have you made changes on the computer before this problem?

  I suggest to run the network troubleshooter, and check the status of the issue.

  Using the troubleshooter from network in Windows 7.

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  You can also refer to:

  Set up a computer-to-computer (ad hoc) network.

  http://Windows.Microsoft.com/en-us/Windows7/set-up-a-computer-to-computer-ad-hoc-network

  Wi - Fi and in Windows network connection issues. http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• FDM - a script engine for the specified language cannot be created.

  Hello

  When I try to log into the application of FDM, I get the error message below. FDM - 11.1.1.3 application version. I restarted all services and tried to log in again. But getting same error message.  It was working fine before. Please could you help me solve the problem.

  "Error: an error occurred in the logging on the system." -A script engine for the specified language cannot be created. »

  Thank you

  Michel K

  Your vbscript.dll is corrupt. Replace with a good copy and register again via cmd regsvr32.

• Photoshop CS5 says me file cannot be created

  Help, please!

  I work on a Mac and using photoshop CS5.  Work with raw files I saved multiple pictures with no problem, but I'm now being told of file cannot be created.  Any advice would be much appreciated.  Thank you.

  First you ctrl-click on the thumbnail in the bridge.

  In the context menu, highlight, but do not click on the option "open in Camera Raw.  Do not move your mouse.

  Press on and press Cmd-Opt-shift

  Now you click on "Open in Camera Raw" to see the dialogue box reset

• Bridges, in starting to copy files from Adobe Camera RAW to jpeg or tif, error "the file cannot be created" - can all someone please advise? No Tech phone today?

  To all

  In Bridge, in starting to copy files from Adobe Camera RAW to jpeg or tif, error "the file cannot be created" - can all someone please advise? (No phone Tech Saturday?)

  Thanks for the quick responses today from anyone in the community,

  -Mark, Portland Oregon

  Please provide details: you are not trying to change the file type by changing just the extension, are you?  That won't work of course,

  Either you try to run some type of script?

  To change a file type, you have TO open the file in Photoshop and do save as.  That can be automated.

• cluvfy returns the "/tmp/" path does not exist and cannot be created on nodes

  Hello
  I'm installing Oracle RAC for SAP to AIX 5 L.
  After performing due diligence for the installation of cluster service, it returns the following message:
  "/Tmp/" path does not exist and cannot be created on nodes
  This meessage happens after checking access node and the phases of user equivalence.
  This is my complete log:
  pr_bd01/oramedia/clusterware/Disk1/cluvfy / > stage pre - crsinst - n pr_bd01, pr_bd02./runcluvfy.sh
  
  Conducting due diligence to install cluster services
  
  Audit accessibility of node...
  Verification of accessibility node from node 'pr_bd01 '.
  
  
  Verify the equivalence of the user...
  Check of user equivalence passed for user 'oracle '.
  
  ERROR:
  "/Tmp/" path does not exist and cannot be created on nodes:
  pr_bd01
  Audit will proceed to nodes:
  pr_bd02
  
  Check prior to the installation of cluster service failed on all nodes.
  
  The directory/tmp is a shared file system and oracle user can write and read
  User Oracle ID is the same in both nodes
  The dba group ID is the same in both nodes
  Oinstall GID is identical in the two nodes
  The primary group for the user Oracle is oinstall
  
  Where is my problem?
  
  Thank you
  
  Published by: user8114467 on 02/27/2009 07:17

  You can also run with - verbose flag - what is the difference between / tmp on 2 machines - define export CV_DESTLOC = /.

• Data source cannot be created: [MapperConfig] unable to add the source of card data.

  I get this error:
  * The data source cannot be created: [MapperConfig] unable to add the map data source.*
  
  While following step 2 of the installation Demo MapViewer tutorial.
  
  I have the BI server installed on a machine and to implement the demonstration on a data schema database RAC.
  
  I managed to configure the connection via OIC and TNS Planner,
  but now when I try to add, OracleAS MapViewer Admin, data MVDEMO source I get this error.
  
  I use:
  NAME mvdemo
  BASED ON: TNS is selected
  TNS name: ORCL_TAF
  User: mvdemo
  Password: mvdemo
  # Mappers: 3
  Max connections: 100
  
  Thank you
  Marco

  Hi Marco,.

  I had the same problem with the MapViewer and a RAC.

  You define your data source in the MapViewerConfig.xml? You will find this XML code under: j2ee/mapviewer/applications/mapviewer/web/WEB-INF/conf

  If so, you need to restart your OC4J Instance with the option "-userThreads. You can do this in the properties of the server administration/mapviewer/unter EnterpriseManager or with the opmn.

  So, I think, you have first to define your data source in the configuration file. Otherwise, it does not have with a CAR.

  I hope this helps.
  Andrea of CU

• cannt connect my hotspot SE iphone to my windows laptop 10

  cannt connect my hotspot SE iphone to my windows laptop 10
  can laptop can find hotspot sharing but when I type to connect, my iphone screen goes blue and white and after 2seconds he diconnects.
  Help me please
  TNX

  1. try to change the name of your phone so that your laptop creates a different profile for it. For the most part occurs when you change your hotspot password and it is not updated on your laptop.

  If your familiar with the settings in windows 10. You can go into the wifi settings and remove the profile created for your hotspot and then reconnect and re - enter the password.

  1. Click on the network icon in the lower right of your screen.
  2. Click on network settings.
  3. Click settings to manage a Wi - Fi connection.
  4. Under management of known networks, click the network that you want to remove.
  5. Don't forget click. Wireless network profile is deleted.

  It will be useful.