Pavilion 27N4Q57AA: card mother Crusher - crane 4g - 4g v

Similar Questions

• HP Pavilion s7210n card mother SATA compatibility

  Hello

  I have a question on a motherboard that is installed in a PC HP PAVILLION of Slimline s7210n, purchased in 2005.

  This is all the part # and other information that I could see on the motherboard:

  PTGV-LM
  N13219
  C58S198-00877-60-MBL3A2-A04

  The original hard drive is SATA 1 (1.5 Gb/s).  I would like to replace the original HDD with a SATA 2 (3 Gb/s) HARD drive.

  The motherboard has 2 entry SATA connections.  The connection that is not used is labeled "SATA 3" on Platinum motherboard.  I think that it is a 'SATA 2' port and model of PCB plate refers to the speed (3 Gb/s) since SATA 3 (6 Gb/s) is only available in 2009.

  This PC was purchased in 2005.

  A SATA 2 HARD drive will work with this motherboard?

  Hello:

  A SATA II HARD drive will work, but only at the speed of 1.5 transfer in this PC.

  That's all the 915 chipset can handle.

  The port numbers are only of numbers, not of speed of the sata drives.

  You plug certain devices into ports with some numbers.

  For example, you would plug the bootable hard drive into port 1, port 2, a DVD in the 3 port high school.

• HP pavilion a1330e card mother drivers for Windows XP 64 edition?

  I had to recharge the system and I still have errors on multimedia Audio Controller and SM bus driver. HP only supports drivers for XP to Vista to 7. Should I try another driver 64-bit vista or Windows 7?

  Hello LivvPowerplay.  I understand that you are trying to locate the Windows XP 64-bit drivers.
  
  
  
  Unfortunately, you are very unlikely to find the drivers for the 64 bit version of Windows.  64-bit Windows has never really taken off, and there is almost no support for it (from anyone, not only HP).  You will need to use 64-bit Windows Vista or Windows 7 operating systems.  I suggest Windows 7.
  
  
  
  If you have any questions let me know.  I wish you a nice day!

• the upgrade card mother DM3-Pavilion

  Hello

  My 4 year Pavilion dm3, recently died on me. It's a little elegant machine, I wanted to wear around and who was always OK for occasional daily tasks. For these reasons and others, I would at least try to replace the defective motherboard and revive.

  The model I bought is a dm3-1003tx exotic model (bought in Thailand, especially with a keyboard QWERTY/thai), with Intel SU7300 and discrete nVidia GeForce G 105 M graphics chip.

  Given that the original motherboard is not easy to find (PN 584079-001, only a couple of bids on ebay of the Japan), can someone tell me:

  -If it's OK to replace it with an another based SU7300 of motherboard (can be with or without the nvidia chip - I really don't need it).

  -or even better upgrade to a motherboard of SP9300 based to get a performance gain? If so, should I expect any change (it looks that the consumption of energy and the frequency of the buses are higher with the SP9300 then maybe RAM...?)

  Is there any tool available around compatible HP part numbers?

  Thank you

  No, there is not a matrix of cross, useful reference because it would be. I think that HP is simply too many different models and parts for someone to keep track of it all. HP Service is inspired by replacement with the same part number so their internal service people wouldn't even have much use for such a thing, just us end users.

  Motherboards have the processor soldered to the and there is only a single part number for the fan/radiator Intel stated so I would say that if you replace your motherboard with it:

  580663 001

  with the SP9300, you'll be able to reuse your fan/radiator. In the case where you don't have it here is the repair:

  Manual

  All models use the DDR2-800 memory and accept up to 8 GB. Different motherboards all seem to have the same ports and such and will have the same anchor points. You could even theoretically install a card mother AMD-based, but this would require to reinstall an operating system, and I wouldn't trade an Intel processor for an AMD processor in any case unless AMD have been much cheaper. A Committee from AMD would also require a different radiator, however.

  You can buy the SP9300 motherboard for $45 shipped on eBay:

  http://www.eBay.com/ITM/580663-001-HP-Compaq-motherboard-Pavilion-dm3-Intel-laptop-W-SP9300-CPU-581467-0-/400445142883?PT=motherboards&hash=item5d3c63f763

  The same seller also has the SU7300 for a few dollars less:

  http://www.eBay.com/ITM/584078-001-HP-dm3-1000-laptop-motherboard-w-Intel-SU7300-1-3GHz-CPU-/400600978029?PT=motherboards&hash=item5d45add26d

  I bought a little of this seller and it looks like they have a lot of them on the spot so must have dismantled a certain dm3s. Maybe if you call them they can steer you in a way or another based on real practical experience. I confess that I have the opportunity to work on this exact model.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• What card mother motherboard inside the Pavilion hpe h8xt with Ivy bridge

  You want to buy, but can't find any information on what motherboard that uses. Would love to see a pattern!

  @ Big_Dave

  Here is the card I found for the card mother HP OEM Pegatron IPMMB - FM (Formosa). The specifications indicate the decision-making is an Intel LGA 1155 (Socket-H2) and processors supported are;

  Intel Core i3-3xxxT (Ivy Bridge) Dual Core	256
  Intel Core i3-3xxx (Ivy Bridge) Dual Core	456
  Intel Core i5-3xxxT (Ivy Bridge) Dual Core	256
  Intel Core i5-3xxxT (Ivy Bridge) Quad Core	152
  Intel Core i5-3xxxS (Ivy Bridge) Quad Core	756
  Intel Core i5-3xxx (Ivy Bridge) Quad Core	676
  Intel Core i7-3xxx (Ivy Bridge) Quad Core	676
  Intel Core i7-3xxxK (Ivy Bridge) Quad Core	676
  Intel Core i3-2xxx (Sandy Bridge) Dual Core	756
  Intel Core i3-2xxxT (Sandy Bridge) Dual Core	256
  Intel Core i5-2xxx (Sandy Bridge) Quad Core	95W
  Intel Core i7-2xxx (Sandy Bridge) Quad Core	95W
  Dual-core Intel Pentium G6xx (Sandy Bridge)	756
  Dual-core Intel Pentium G6xxT (Sandy Bridge)	256
  Dual-core Intel Pentium G8xx (Sandy Bridge)	756

  and supported memory;

  Dual channel memory architecture
  Four DIMM DDR3 240-pin connectors

  Supports DIMM DDR3 modules

  PC3-10600 (1333 MHz)

  PC3-12800 (1600 MHz)

  Memory non - ECC, unbuffered

  Supports 1 GB, 2 GB and 4 GB DIMM

  Supports up to 4 GB on 32-bit systems

  Supports up to 16 GB on 64 - bit systems

  Frank

• Pavilion Elite 300Z: identification of card mother sata socket

  My card mother Aloe-GL8E has 6 sockets SATA of different colors - black, white, blue, yellow, red. What the colors mean on this forum, as I think they are all 3 GB/s? I want to add a second HDD - does matter which plug it goes in?

  The plugs are numbered from 1 to 6.  The boot order will follow in succession.

  I found a reference.  Can you check the color and number?

  Dark blue - disc 1

  White - disc 2

  Light blue - Disc 3

  Yellow - disc 4

  Red - disc 5

  Black - disc 6

• Pavilion A4316F Desktop with M2N78-(Violet6) card mother CPU Upgrade

  I looked at the HP Site before making the CPU to upgrade to purchase (http://support.hp.com/us-en/document/c01925562) my office.  I bought an AMD Phenom II x 4 processor clocked at 3.4 Ghz.  When I installed the CPU and try to start, I have a unknown, computer processor stop error.  From what I can tell on the HP site, this processor should work with this motherboard.  Any suggestions?

  Please provide the role other than whole or number of the plateau of the AMD processor for our review. Only 3.4 Ghz AMD Phenom II x 4 processors I know are the 125 watts Note: AMD Phenom II x 4 965 Black Edition and the140 watts Note: AMD Phenom II x 4 965 Black Edition. None of these processors are compatible with the Violet6 motherboard in your system. The card mother Violet6 is intended to be used with processors up to 95 watts. In addition, "Black Edition" CPUs have discovered clock multipliers to be used in overclocking, but does not support the Violet6 overclocking motherboard.

  Please consider these 95 watt AMD AM3 processors except CPU 'Phenom II X 6' and processors ' B #

• Pavilion Elite HPE580t: PEGATRON TRUCKEE card MOTHER. ROM FILE

  Windows 7 Ultimate 64

  Intel Core i7

  Card mother Pegatron IPMTB-TK

  Unfortunately, I bricked my pc when flashing the bios to v6.12. I'm trying to downgrade bios to 6.10 which worked well.  I can't load windows from the hard drive.  I started with success to BACK of USB and can run AFUDOS but I think that I don't have the right. File ROM.  How can I create a. ROM file since the .exe?  Or someone has it all. ROM prior to version 6 I could use? Or can I use a .bin to Flash file this motherboard.

  @coneybug

  Try F8 during startup and see if you can boot into safe mode.  If the default BIOS have changed as the <->RAID AHCI, then you may experience a blue screen.

• Drivers Windows 7 x 64 for the card mother Memphis-M

  Hello! I bought the HP Pavilion 500-164er with Linux operating system desktop PC.

  Still, I installed Windows 7 x 64 on this unit, but I couldn't find some drivers for the card mother Memphis-M.

  I need:

  Simple communication controller PCI Chipset, USB 3.0.

  Thank you and waiting for a response.

  Hello:

  You can use the W7 x 64 drivers and software of this model that has the same motherboard as yours.

  DO NOT USE ANY BIOS OR THE FIRMWARE OF THIS MODEL FILES

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063 & LC = on & CC = US & DLC = in & sw_lang = & Product = 7049404 #N543

  Chip set:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=CP-134596-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 7049404 & sw_lang =

  Comms Simple PCI:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=CP-134614-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 7049404 & sw_lang =

  USB 3:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=CP-134611-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 7049404 & sw_lang =

• HP Pavilion DV7 laptop: mother board &amp; cpu compatability

  I think to change the processor in my laptop Pavilion DV7 it ha a HP 516292-001 motherboard.  # High school is 7G09A1 TFC date is 2009-01-09 I want to know if an I7 processor is compatible, or what cpu would be compatible.

  Fatima can a CPU of the laptop upgraded, but it seems that canbe card mother especially.  Here's what I found on CPU support:

  Supported CPU: Intel Core 2 Quad Q9100, Q9000

• Can I switch to an Intel Pentium D 945 on a card mother Napa-GL8E?

  Hello, I have a HP Pavilion a6403w with an Intel Dual - Core processor E2160 (1.8 GHz) on a card mother Napa-GL8E. I would like to know if it is possible to switch to an Intel Pentium D 945 (3.4 GHz) on this motherboard. Before that everyone goes to the top and say no, I read a few post image Core 2 s running on this motherboard. And if an Intel Pentium D 945 would not work, what else would be a good upgrade for my PC? Thank you.

  (Edit: Opps, I posted this in the wrong forum.)

  Computer a6403w and Napa-GL8E pages care about motherboard;

  Type of socket: 775
  Motherboard supports the following processor upgrades
  Intel Core 2 Duo (Wolfsdale) E8xxx
  Core 2 Duo E6xxx until E6850 (Conroe)
  Pentium (Conroe) E2xxx series with Dual Core E2160 technology
  Core 2 Duo E4xxx (Conroe)
  Celeron 4xx series (Conroe) until Celeron 450

  Based on this information, the Pentium D 945 only is not supported on this platform. Referring to your "multiple posts reading" on quad-core Core 2 on the Napa, the information relates mainly to non - OEM versions (read no HP) of the Board of Directors. Sumsolstice mentions the internal docs showing micocode updated but does not purely and simply that it will work. The best processor would probably be the Core 2 Duo (Wolfsdale) E8xxx series.

  Frank

• The card mother MS-7184 (AmethystM) in my old HP PC takes in AHCI mode?

  First of all, thank you for taking the time to read my post!

  I recently bought an OCZ Aligity 4 256 GB SSD drive. I want to use the SSD as drive replacing the original hard drive in my old HP Pavilion Media Center TV m7334n desktop PC. Here is the link to my pc:

  http://h10025.www1.HP.com/ewfrf/wc/product?cc=us&LC=en&DLC=en&product=1821850

  I know that the motherboard identified on the Web site above for this model of PC is A8AE-(AmberineM), but the motherboard I have is MS-7184 (AmethystM), the specifications of the motherboard is here:

  http://support.HP.com/us-en/document/c00378480

  I updated the BIOS with the latest version (3.47, 03/03/2006) I can found on the HP website. In the BIOS, I can't find any info on the AHCI support. My questions are:

  1 - is the card mother MS-7184 (AmethystM) in my old HP Pavilion Media Center TV m7334n Desktop PC support AHCI mode?

  2. how to configure CMOS when I use the SSD as my main drive on the old HP computer?

  Note Please that I have aleady copy drive hard whole orginal on the new SSD and I started my computer on the new SSD. This works. I have another post questions on the recovery of the system on the SSD, the post is here:

  http://h30434.www3.HP.com/T5/desktop-operating-systems-e-g/system-recovery-doesn-t-work-on-cloned-SS...

  Thank you!

  You are the very welcome.

  I leave these settings at their default values.

  You have the SSD connected to sata port, and it must operate to the maximum 150 Mbps transfer speed, 133 or 100 no matter what readings are displayed, as would an IDE drive.

  The problem is that since there is no AHCI setting, the drive cannot enjoy the native command files or TOPPING.

  Aside from that, an SSD should be better that a standard SATA I mechanical drive or IDE hard drive.

  Even subjectively, you should 'see' a difference in sensitivity of disc, not you?

  Improved time, faster startup time for research, for example.

• Problem of card mother-suggestions

  I have a Desktop Pavilion p6310y and I lost my second mother. He has a Paragon M2N78 - motherboard and said that it is the only one that can be used on this computer. Does anyone know if there is another motherboard that can be used on this computer? It has a processor AMD 2.8 ghz and 6 GB of ram. I really want to buy a new computer, I just want to see if it can be resolved.

  For any help or suggestion would be appreciated.

  Bob

  Bob,

  Here are the specifications of your desktop HP Pavilion p6310y and its card mother M2N78-(Violet6). Please note that this model uses the 'VIOLET6' of the M2N78 - motherboard version and not several different version called M2N78 - LA. This model came from the factory with an AMD AM3 Athlon II X 4 630 and 6 GB memory DDR3.

  While you can replace the motherboard with a new one, Windows will become "not authentic" and you will need to purchase a new copy of Windows. Other problems that may arise,... include your recovery discs HP will no longer works, back plate I/O may not match, mounting motherboard can not align the studs, etc.. When installing a new copy of Windows, you will lose all 'value-added' original HP supplied with your computer software.

  If you're OK with every possible question of a motherboard out of factory usage, consider these cards mothers AMD AM3 + who is responsible for your AM3 Athlon II X 4 630 CPU and DDR3 memory.

  Please send Bravo

• HP Pavilion elite e9000 (mother of IPIEL-LA3) - updated bios for RAM w / 4 GB DDR?

  Hello

  I bought a computer (custom config) Pavilion elite e9000 of costco in 2009, so I've offended have an exact model in 31 configurations HP number has for this model in the software support.  He had 6 GB (3 x 2 GB) DDR3 ram on a motherboard with Intel Core 2 Quad CPU @2.5 GHz IPIEL-A3...  Bought with Vista, now under Windows 7 64-bit

  Trying to speed up the computer (vs upgrade) and from what I can tell, 4 GB of RAM chips are not compatible with the motherboard.

  Try to understand if a BIOS upgrade would work, but the card BIOS upgrade mother IPIEL-LA3 throws an error 253.

  Y at - it an update to software that I can do to allow me to update the RAM (like to go to 12-16 GB of my 6 today)?

  Here are the specifications and configurable options for your desktop HP Pavilion Elite e9110t. Here are the specs because that's card mother IPIEL-A3 (Eureka3). According to specifications, your system supports the following memory configurations;

  Four DDR3 DIMM sockets (240 pin)

  Supports DIMM DDR3 2 GB modules

  Supports dual channel memory architecture

  PC3-8500 1066 MHz

  PC3-6400 800 MHz

  Memory non - ECC, unbuffered

  Supports up to 8 GB on 64 bit computers

  Supports up to 4 GB on 32-bit computers

  4 GB DDR3 DIMMS are not supported by this system. It's usually because that material (chipset) does not support sizes larger than those listed. In rare cases the limitation may have been imposed by HP in the BIOS. The update of the BIOS address not to increase the size memory or questions. Error 253 means that the BIOS is not for your system or your system does not meet the minimum requirements of the update. If you want to install the update in safe, you must install it to Vista.

  BIOS update 'sp43102.exe' requires a Microsoft Windows Vista operating system installed.

  Exit the: 2009-08-03

  Version: 5.05

  Compatibility: Microsoft Windows Vista, Microsoft Windows Vista (64-bit)

  Fix/development:
  Resolves a problem with USB not detected mass storage devices.

  Updates the boot order to place the optical drive before the hard drive.

  Resolves a problem with memory cards UDMA Ultra Direct Memory Access () see the incorrectly in Windows.

  Updates vBIOS to address issues HDMI.

  Updates the strategy thermal processor.

  Fixes an issue with the BIOS fault recovery if the card reader is connected.

• Replacement card mother Qosmio G10

  After replacing the card mother a Qosmio G10-120 original Win Xp MCE with the official update (FC43S1 A5A001749010 P000454980 jury), some problems have arisen:

  1. second HARD drive internal no more seen.
  2. all buttons stop "standby/disable rebooting the computer" do not completely take effect (office closed way unexpected but manual power button continues to show the color blue and portable remains active).
  3. always on cooling fan.

  Upgrade the motherboard consisted of:

  1. creation of new channels DMI Council (in particular "Model name" field was set to "Qosmio G10").
  2. loading the CD-ROM TCN0000006 official update tool.
  3. no recovery BIOS or EC/KBC.

  Any idea?

  I m wondering how you did update the information in the DMI?
  As far as I know that the Toshiba authorised service provider is able to update information DMI as the model name, version number, etc. using utilities and special tools.

  I googled for the motherboard part number, you have deposited in your original thread, and it seems that this motherboard has been developed the Qosmio F15 series.
  So maybe his bad card mother