Pavilion 500 C60: Free disk space D

Similar Questions

• Pavilion 500 - C60: new office reads, "ERROR: no boot disk was detected or the disc has failed" at startup.

  Just bought Pavilion 500 - C60, running Windows 8.1 64-bit and am doing everything on old HP running Windows Vista Home Premium SP 2. Has not gone smoothly from one thing to another, but I think everything comes together. A couple of days, began to receive the error message at startup or, if I COULD do so that it starts would go for awhile and then would get an ERROR message, requiring restart. Usually after obtaining the error message several times, the computer would then initialize. Tonight, I couldn't override the error message for anything! When you press power button / stop, I hear (HD) running for a few seconds, everything is silent, and then the error message appears on the gray screen dark in white letters, BACK very and sinister looking! Any suggestions? Had the computer about two months and it has not been easy.

  Not good!  Check all the connectors and the hard drive to make sure that they are correctly wired in place. Make sure that your cable is not reversed.

  Contact the seller if still under warranty for repair.  This could be the hard drive or motherboard and the problem lies the only diagnosis from a repair facility.

• CARD READER USB FOR DESKTOP HP PAVILION 500 - C60?

  I have a new 500 - C60 HP Pavilion desktop computer, but the front card reader does not accept the largest flash Compact Flash (CF) card.  I have an old USB multi-card with four different card slots, which accepts the card see  Would this setting work satisfactorly?

  Thank you

  shamrock838

  Hello @shamrock838,

  I understand that your desktop HP Pavilion 500 - c60 PC does not support the biggest Compact Flash Memory Card and you are curious as to whether or not you can install an USB multicard Reader which accepts the memory card see First of all, you have reason 7 - in1 media card reader did it installed does not supported CF memory card, but it supports the following cards:

  • Digital safe™ (SD)
  • Secure Digital High Capacity (SDHC)
  • SDXC
  • Memory Stick
  • Memory Stick Select
  • Memory Stick PRO
  • Memory Stick MagicGate

  I don't see why you can't connect the 4 - in1 USB multicard reader you have. Until the operating system detects and installs, you should be fine.

  I hope that I have answered your question to your satisfaction. Thanks for posting on the HP Forums. Have a great day!

• Pavilion 500 - c60: product key

  If I chose to load Windows 7 Home OS on the 8.1 that sits on the newly purchased Pavilion 500 - c60 will be I had problems? AND if I choose to RELOAD 8.1 on the computer in the future how do I get the product key if as you say his anchored in the bios?

  Thanks for your replies. My reason for decommissioning is a requirement with my Autocad Architecture 2012 which does not work on windows 8.1. Stupid me! I should have looked into this before buying the computer. But I like the computer because it is a 64 bit with 8 GB of memory and I love the W8.1 too. Very compatible with my ph sound cell phone android. So until I can afford to upgrade my Autocad I'm stuck with Win7.

• Remove MSXML programs safely to free disk space.

  I have a Sony VIAO with windows XP. This is an old desktop computer and not my computer alone.  I try to free up disk space on my C drive and did the basics.  I'm looking to remove programs but I get a message that I don't have enough space to remove programs.  My question is under Add or remove programs, I show 6... Programs MSXML.  listed in this order... MSXML 4.0 (KB25672), MSXML 4.0 (KB927978, MSXML 4.0 (KB936181), MSXML 4.0 (KB954430), MSXML 4.0, (KB973688) MSXML 6.0 PARSER (KB933579).)  One of these can be removed?  Any suggestions on how to free up space in order to remove programs and not get the error message... "not enough disk space to remove programs.  I have an external drive that has LOTS of space.  Thanks for your time.

  I recommend that you do NOT remove any entry in Add / Remove programs that starts with k.  In fact, you should uncheck the "Show updates" box in Add or remove when you go there looking for things to uninstall to create more disk space.

  I have not watched all the items you list, but some (and I expect everything else) are critical security updates.

  There are a number of things you can do to - temporarily - free disk space.  The only real solution, however, is to get a bigger internal hard drive.   You can move the data to your external drive, but if it's the data that you use frequently, slower access times may annoy you.  Therefore, I do not recommend that you move your My Documents folder in its entirety on the external drive, but you can certainly do this by following the related instructions.

  • You can run Disk Cleanup (start > run > cleanmgr > OK)
  • You can reduce the size allocated for the restoration of the system to about 1 GB (right click on desktop > properties > system restore > settings)
  • You can disable hibernation (if you don't use it) (right click on an empty spot on the desktop > properties > screen saver > power > Hibernate)
  • You can disable the indexing of the drive, which will also speed up your computer a bit (http://lifehacker.com/031440/turn-off-indexing-and-speed-up-windows-xp)
  • You can reduce the size of your Internet browser cache (depending on the browser that you use)

  But none of these answers you will earn really large amounts of space for very long.  The term solution time is a bigger hard drive.

  In the meantime, download and run JDiskReport, that will show you graphically what files take up more space and seem to so indicate what files you must move it to your external drive.  If you want to move an application, you will need to uninstall and then reinstall it specifying your external drive as the installation location.  You can not simply move the files.

• Free disk space on the C partition

  Separated from this thread.

  I am also having the same problem.  I am running Vista Home Premium SP2.  I was getting close to complete on my drive C (13% free space). I was shocked to see how quickly it filled up, almost as if he did it by himself.  I was downloading a lot so I had no idea how it happened.  I ran each program cleaning and each antivirus that I had to try to make room.  I cleaned up program files deleted a bunch of audio and video files, and it does not seem to do much more of a difference.  I shut down the computer for the night and is returned to him the next morning.  I ran and bought a few flash drives to transfer files more and when I booted up I checked the hard drive and it was back to 48% free space (as it was before).  I have no idea what happened, but so far, it seems to be fixed...?   one of the cleansers I ran also ccleaner.

  Free disk space
  Last updated 18/01/2014
   

  Content

  • To see how much space you have used and free
  • To see where the files are too much space
  • Disk Cleanup
  • System restore
  • Fix the basket
  • Fix temporary Internet files
  • Delete files in the system and the folder Temp of Service Profiles
  • Check the size of the swap file
  • Disable the hibernation
  • Compact the Windows databases use various
  • Delete the files updated by the Service Pack
  • Move your Documents
  • Remove saved files created by Photo Gallery
  • Which extends the size of the disk
  • Compress files
  • Turn off the low disk space warnings
  • Boost disk cleanup
   

  To see how much space you have used and free

  Start - All Programs - Accessories- Click with the right button on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

  For the system drive

  WMIC volume where (DriveLetter = '% lecteur_systeme %') are legend, capacity, freespace List

  For all readers

  WMIC volume get/all, freespace, the ability, the legend

  If you want to store this info on your desktop

  WMIC /append:"%userprofile%\desktop\Free on disk space" volume get Caption, freespace format:htable

  To open double click on Free Disk Space on your desk or type

  Start "" "%userprofile%\desktop\Free report.HTML of disk space.

  Then come back here after cleaning and repeat these commands to see the difference.

  If for any reason, the wmic command does not work, use these two commands. Both take a lot of time.

  % Lecteur_systeme % - one defrag

  or

  dir %systemdrive%\*.*/a/s

   
  To see where the files are too much space
   
  It lists the number of files and the size of the folders on your drive. Each command is a subset, so you can run it better.
   
  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).
   
   
  Then configure the command prompt. Right-click on the tab of the titlebar - Properties - Layout command prompt - and enter 1000 screen buffer size height and 43 (or 50) to Window Dimensions height. Change the color (color tab) and the police (police tab), if you want.
   
  To see the size of the folders in Documents, excluding images, video, or music files.
   

  for /f "Skip = 2 tokens = 3 ' set doc = A %%A in ('Reg query"HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders"/v"Personal"")

   

  for /f "usebackq tokens = 2 * delims =" %i IN ("dir"% doc"/ a/s ^ |") "." findstr/i/v "\/"^|findstr/l/v "photos video" ') @echo %j & echo. "

   
  To see the size of the folders in the music.
   

  for /f "Skip = 2 tokens = 4" %A in ('Reg query "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders" /v 'My music' ") set Doc = A %

   

  for /f "usebackq tokens = 2 * delims =" %i IN ("dir"% doc"/ a/s ^ |") "." findstr/i/v "-/"') @echo %j & echo. "."

   

  To see the size of the image files.

   

  for /f "Skip = 2 tokens = 4" %A in (' Reg query "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders" "My pictures" /v ") set Doc = A %

   

  for /f "usebackq tokens = 2 * delims =" %i IN ("dir"% doc"/ a/s ^ |") "." findstr/i/v "-/"') @echo %j & echo. "."

   

  To see the size of the files in the video.

   

  for /f "Skip = 2 tokens = 4" %A in ('Reg query "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders" /v 'My videos' ") set Doc = A %

   

  for /f "usebackq tokens = 2 * delims =" %i IN ("dir"% doc"/ a/s ^ |") "." findstr/i/v "-/"') @echo %j & echo. "."

   

  To see the size of the files on the desktop.

   

  for /f "Skip = 2 tokens = 3 ' set doc = A %%A in ('Reg query"HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders"/v"Desktop"")

   

  for /f "usebackq tokens = 2 * delims =" %i IN ("dir"% doc"/ a/s ^ |") "." findstr/i/v "-/"') @echo %j & echo. "."

  To see the size of the files in the Windows folder.

   

  for /f "usebackq tokens = 2 * delims =" %i IN ("'%windir%' dir /a /s ^ |") "." findstr/i/v "-/"') @echo %j & echo. "."

   
  To see the size of the files in the Program Files folder.

   

  for /f "usebackq tokens = 2 * delims =" %i IN ("'%ProgramFiles%' dir /a /s ^ |") "." findstr/i/v "-/"') @echo %j & echo. "."

   

   

  Disk Cleanup
  To run Disk Cleanup, normal is to click with the right button on the drive in my computer (Start menu - computer), then Properties - general tab - Disk Cleanup button.
   
   
  Another way is menu Start - All Programs - Accessories - System - Disk Cleanup tools.
   
  Disk Cleanup can be started from the command line.
   

  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

   
  To make your primary drive.
   

  cleanmgr letter

   
  Choose which lead to do.
   

  Cleanmgr

   
  See the last section of this post to see how to performance of disk cleanup.

   System restore

  With disk cleanup displays above the Other Options tab. You can delete all but the last System Restore point and see if that is too much space.

  System Restore uses 15% of the space normally. Change click Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type Regedit and navigate to

  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\SystemRestore\cfg

  Double click on DiskPercent and click on decimal and change the value to the desired percentage,

  You can change the command prompt.

  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

  To see the size of the system restore folder.

  You don't normally have access to this folder. You will need to take possession, allow administrators to permission, then the size of the query.

  takeown /f "%systemdrive%\System Volume Information" / a r d y

  ICACLS "%systemdrive%\System Volume Information" / grant administrators: f, t, c, q

  dir "%systemdrive%\System Volume Information" / a/s

  To see the current percentage

  Reg query "HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\SystemRestore\cfg" /v DiskPercent

  It is in hexadecimal. The numbers are 0-9 and a-f. So 0xf is 15. 0x5 is 5, 0 x 9 is 9, 0xa is 10, 0 x 14 is 20.

  To set a different value.

  You can use decimal values to set. This affects 10% (in bold in the example and the last item in the line).

  Tracking Add "HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\SystemRestore\cfg" /v DiskPercent /t REG_DWORD /f /d 10

   
  To repair the system restore, file delete and restart the system restore.
    

  SC stop vss

  takeown /f "%systemdrive%\System Volume Information" / a r d y

  ICACLS "%systemdrive%\System Volume Information" / grant administrators: f, t, c, q

  e "%systemdrive%\System Volume Information" / q/s

  SC start vss

  Fix the basket

  Sometimes, files get lost in the trash. Remove the storage folders. It will be automatically re-created next time you delete a file or open the Recycle Bin. It will remove the trash and the files it contains for all users.

  Empty the trash.

  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

  To see the size of the files in the Recycle Bin

  It must have one or no files inside if you work. There should be a directory (folder) by user.

  dir % systemdrive%\$RECYCLE. BIN\ *. * /a /s

  To reset the trash

  e % systemdrive%\$RECYCLE. BIN/s/q

  Fix temporary Internet files

  Sometimes, files get lost in the temporary internet files folder. Delete the files. It will be automatically recreated the next time download you. It will remove the current user only.

  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

  To see the temporary internet files size empty files folder

  RunDll32.exe InetCpl.cpl, ClearMyTracksByProcess 8

  dir ' %userprofile%\AppData\Local\Microsoft\Windows\Temporary Internet Files\ *.» "*" '%userprofile%\AppData\Local\Microsoft\Internet Explorer\DOMStore\*.*' / a/s

  Then delete.

  Close Internet Explorer and the Explorer first. Some files may not remove at the moment, they can be deleted later.

  "%userprofile%\AppData\Local\Microsoft\Windows\Temporary Internet Files" del /s /q

  also the DOM store, similar to TIF.

  "%userprofile%\AppData\Local\Microsoft\Internet Explorer\DOMStore" del /s /q

  So to see the new size.

  dir ' %userprofile%\AppData\Local\Microsoft\Windows\Temporary Internet Files\ *.» "*" '%userprofile%\AppData\Local\Microsoft\Internet Explorer\DOMStore\*.*' / a/s

   
  To see the size of the cache, type the following
   

  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

   

  Reg query /v "Settings\5.0\Cache\Content Software" CacheLimit valid

  Use the calculator to convert hexadecimal into decimal. Start the Calculator (Start - All Programs - Accessories - calculator) and choose the menu display - scientific, then the menu display - Hex. Enter the value returned above. Menu display - decimal. To convert windows units divide by 1024 for kilobytes, divide by 1024 megabytes.
   
  Located between 50 MB and 250 MB. You can use decimal here. The unit is expressed in kilobytes. Here it is 250 megabytes (250 000 x 1024 bytes)
   

  Add tracking 'Software Settings\5.0\Cache\Content' v CacheLimit valid /t Reg_DWord /d 250000 f
  

    

  Delete files in the system and the folder Temp of Service Profiles

  The system temp folder is only used when no one connects. It is rarely used but never cleaned. Some services have their own temporary folder which is also cleaned.

  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

  To the list

  dir c:\windows\temp C:\Windows\ServiceProfiles\NetworkService\AppData\Local\Temp C:\Windows\ServiceProfiles\LocalService\AppData\Local\Temp/a/s

  To remove

  del C:\Windows\ServiceProfiles\NetworkService\AppData\Local\Temp\*.* C:\Windows\ServiceProfiles\LocalService\AppData\Local\Temp\*.* c:\windows\temp\*.*/s/f/q

  Check the size of the swap file

  As a rule generally you want to your swap file slightly larger than the amount of memory that you have. It develops automatically but spread automatically. If you use hungery memory programs as this video editing should be bigger. If too big you can reduce and rush of space can be moved to another drive.

  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

  To see what was your use

  WMIC pagefile get List

  To see the size of the file on disk

  dir /a c:\pagefile.sys

  To change the size or change the road see change the size of virtual memory in Start - Help and Support.

   

  Disable the hibernation

  The file shows up is the same size of installed memory. If this is not the case, turn off the computer in hibernation and save a lot of disk space.

  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

  To see if it is on

  If the file will be found. If off the file won't be there.

  dir %systemdrive%\hiberfil.sys /a

  To turn off

  powercfg-h off

  Make a u-turn

  powercfg-h on

  Compact the Windows databases use various

  You can compact the various databases that Windows uses. This is the Windows Update, Windows Search, and certificates of security, Windows Mail, Windows Contacts, Windows, Windows Live and Internet Explorer ver 10 applications calendar.

  Close Windows Mail and Internet Explorer. Wait a minute for Internet Explorer release locks of sound files.

  See how much space taking up type which is below and note the total size (because it scrolls away).

  Start - All Programs - Accessories- Click with the right button on command prompt and choose Run As Administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

  dir c:\*.edb c:\*.msmessagestore c:\WebCacheV*.dat c:\catdb/a/s

  Then at compact

  SC stop wuauserv

  stop bits SC

  SC stop wsearch

  SC stop cryptsvc

  for c:\ /r %A in (*.edb *.msmessagestore WebCacheV*.dat catdb *.) do esentutl.exe /p "%A" / o

  for c:\ /r %A in (*.edb *.msmessagestore WebCacheV*.dat catdb *.) do esentutl.exe /d "%A".

  SC start cryptsvc

  SC start wsearch

  SC start bits

  SC start wuauserv

  Then to delete some temporary files.

  del c:\*.integ.raw c:\TEMPDFRG*.edb/s

  To see the new size and compare it to the old size

  dir c:\*.edb c:\*.msmessagestore c:\WebCacheV*.dat c:\catdb/a/s

  If a program has a file open, you can use this procedure to find out which program.

  openfiles/local on

  Reset

  openfiles/query /v | findstr /i "WebCacheV [0-9] *------catdb \.edb \.msmessagestore .dat".

  Delete the files updated by the Service Pack

  See how much space taking up type which is below and note the total size (because it scrolls away). Also, note that the total is higher than it actually is.

  This will remove the ability to uninstall service packs.

  According to the service pack that Windows was provided with you can have both, one or none of these two files.

  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

  dir /a /s c:\Windows\WinSxS

  Then type

  Vsp1cln.exe

  COMPCLN.exe

  To see the new size and compare it to the old size

   

  c:\windows\WinSxS dir /a /s

  Move your Documents

  If you have another disk, you can move the documents folder to it.

  Click with the right button on your Documents (or pictures, etc.) Office, videos, Contacts,) the tab file - Properties - location - move.

   

  Delete the thumbnail and icon Caches

  These files can contain thumbnails or icons of files deleted a long time ago. The files will be recreated if necessary.

  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste). The desktop and the start menu will disappear briefly.

  To see the size

  dir "% userprofile%\AppData\Local\*.db" "% userprofile%\AppData\Local\Microsoft\Windows\Explorer\*.db" /a

  then remove

  Taskkill /im explorer.exe/f
  attrib - r s h '% userprofile%\AppData\Local\*.db '.
  attrib - r s h '% userprofile%\AppData\Local\Microsoft\Windows\Explorer\*.db '.
  del "% userprofile%\AppData\Local\*.db".
  del "% userprofile%\AppData\Local\Microsoft\Windows\Explorer\*.db".
  Explorer

  to check the new size

  dir "% userprofile%\AppData\Local\*.db" "% userprofile%\AppData\Local\Microsoft\Windows\Explorer\*.db" /a

   

  Remove saved files created by Photo Gallery

   

  Photo Gallery Windows makes a copy of any file that you are editing. Click Start - All Programs - Accessories - (or press the Windows key + R). Type

  Images of the hull: original

  Delete the ones you don't want.

  Which extends the size of the disk

  If all the space on the disk has not all been used it is possible to extend your drive.

  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

  DiskPart

  then type

  Select the c volume:

  Then type to see in size

  the list volume

  then (it will work if possible or not as appropriate)

  extend

  type to display the new size

  the list volume

  then type exit

  output

  If you want advice on the extension of the partition type the following and paste the result back

  DiskPart

  list disk

  the list volume

  Select disk 0

  partition from the list

  Select disk 1

  partition from the list

  output

  To copy the final text right click in the window - Mark , then select the text and press enter.
   

  Compress files

  There are two ways to compress files in windows. Zip files and built-in file compression. It's built-in file compression. For more information on compression type zip in Start - Help and Support .

  Photos, music and video are already compressed. They can get larger if Windows tries to compress it any further. Also usually a bad idea to compress system files.

  If you have files of worksheet they can very well be compressed. If you have files, installation files, they can also be good candidates. Web pages are also good candidates.

  In Windows Explorer, blue file names means Tablet (it is the file system compression not aka zip files compressed files). Green filename means Encrypted.

  To disable file names colored, in Explorer - Tools menu (Alt + T)- display tab and then clear the check box for Show encrypted or compressed NTFS in color .

  Windows compression, encryption and security to work for the most part by applying attributes to a folder and the files in the folder inherit the folder.

  If you have all the files appropriate for compression, find them in solution, made Explorer right click - Properties - general -Advanced button tab - Compress contents to save disk space. Choose to apply to all files and folders when asked.

  To use a command line to compress the files in the Favorites folder.

  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

  compact/c /s:"%userprofile%\Favorites." *

  Put in Favorites to compress files added

  compact/c /s:"%userprofile%\Favorites.

  To view the details of the compression of the Favorites folder

  Compact '% userprofile%\Favorites\*.* '.

   

   

  Turn off the low disk space warnings

  To disable the function to display the disk low space warnings.

  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

  Tracking Add "HKCU\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer" v "NoLowDiskSpaceChecks" /t REG_DWORD /d 1 f

  gpupdate/force

   

  Boost disk cleanup

  • Operation of disk cleanup
  • Schedule disk cleanup
  • Creating custom cleaners

  To see a list of products of cleaning disk cleanup.

  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

  @echo. & @echo list of cleaners&@echo = & FOR /F "usebackq tokens = 8 delims =-' %i IN ('reg query 'HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\VolumeCaches'") @echo %i

  
   List of cleaners
   ================
   Active Setup Temp Folders
   Content Indexer Cleaner
   Downloaded Program Files
   Hibernation File
   Internet Cache Files
   Memory Dump Files
   Microsoft_Event_Reporting_2.0_Temp_Files
   Offline Pages Files
   Old ChkDsk Files
   Previous Installations
   Recycle Bin
   Setup Log Files
   System error memory dump files
   System error minidump files
   Temporary Files
   Temporary Setup Files
   Temporary Sync Files
   Thumbnail Cache
   Upgrade Discarded Files
   Windows Error Reporting Archive Files
   Windows Error Reporting Queue Files
   Windows Error Reporting System Archive Files
   Windows Error Reporting System Queue Files
   WLX Thumbnail Cache
  

   

• What does the red exclamation point and which would prompt me to now have more free disk space?

  It was getting my full disk space. Up to 1.2 GB to 73 GB. I removed some unnecessary files and programs up to 4.6 GB. Last night my internet was running very slow and I got a message that says that my disk space is full. I went to the Explorer, who intends to seek more to remove offline. To my surprise, it showed that I have 38 GB of free space. At the same time however, some (not all) of my desktop icons now have a red exclamation mark on them. There are some that are shortcuts, jpg files and doc files. That means the red exclamation that tempt me to now have more free disk space?

  I would just be guessing really. He could have files, online backup was queued up. It may be something to do with the shadow copy of Volume. If I use cleaning disc with the option all users and delete restore Points and shadow copies on the tab "More options", I'll be back about 15 GB on a disc of similar size. The effect is only temporary, until they accumulate again.

  http://Windows.Microsoft.com/en-us/Windows-Vista/delete-files-using-disk-cleanup

• Why Windows 7 displays an incorrect amount of free disk space / used on my DVD - RW drive?

  Why Windows 7 displays an incorrect amount of free disk space / used on my DVD - RW drive?

  Windows 7 can show the incorrect amount of free and used space in serious DVD - RW or DVD + RW media properties.  After burning data on the disk, Windows 7 could show that there are 0 bytes of used space and free space available on the disk capacity.  In reality, the amount of used and free space on the disk is reversed.

• 16 GB of free disk space required to upgrade?

  I have a 80 GB drive partitioned and C: has 3 GB of spare, I would like to upgrade to windows 7, but it says I need 16 GB of free disk, Vista is already using 22 gb - if I upgrade to I win 6 GB or is windows really 38 GB because none of my partitions are that big. (E: a 22 GB of spare I put windows on both Partitions?).

  I tried to resize the two partitions by using disk management C: offers the possibility of reduction of the score but the expand option is grayed out.

  Windows 7 32-bit requires 16 GB of free disk space
  Windows 7 64-bit requires 20 GB of free space on the disk

  In fact, Windows 7 does not use that amount of space, but for the actual installation, Windows 7 will store some files temporarily to help with the installation. Disk space actually used by Windows varies from 6 to 10 GB, depending on the edition you are installing.

  You can try to free disk space by running disk clean up and remove old system restore points. You can also try clearing your temporary files directory:

  Click Start, type: folder
  Press ENTER, delete the contents of this folder.

  Additional details and instructions for the release of disk space:
  How to speed up your Windows 7 system:
  http://adacosta.spaces.live.com/blog/CNS! E8E5CC039D51E3DB! 40406.entry

  You should try to uninstall applications you do not use and move files you use for example videos, photos on an external hard drive, you could do temporarily, then restore them after the installation of Windows 7.

• How much free disk space is required to download Photoshop CS6

  How much free disk space is required to download Photshop CS6

  Archive download is about 1.2 GB.

  Mylenium

• free disk space

  Software called "Oracle 10 g" cannot say how much free disk space is available on the hard drives? Probably, it cannot be said that, but I have just re - ask here to be sure.

  An order can say that (how much free space on a disk)-such as the command df on Linux. This command can be used to Oracle software (for example called from PL/SQL script or by a DBMS_SCHEDULER job).

  So yes - Oracle s/w can report (indirectly) on the disk.

• ORA-00257 - a lot of free disk space

  I am trying to load approximately 14 GB of data, for a total of ~13.5 million records.
  The raw data are on 14GBs, and the table space is set to 30GBs, its all text data.
  The data are about 200 files of different site, ranging from 10 to 180 MBs.
  It's test data (real) I use to try to optimize my indexes and others before you start using the table for actual reports.
  A DBA, I am not able in databases and programming, I am, so please bare with me :)
  
  My approach is to use sqlldr on an Oracle 10 DB to load data into a table records_load, and then use a procedure essentially do an insert in the selection of records (...) (...) of records_load, in the records_load deletion.
  
  I've done a few sites one at a time, and they work fine, so I have 500,000 records in my table of records.
  But when I try to transfer the 13,000,000 whole records in the table of loading using the SP, it ends by crashes.
  
  If I connect to sqlplus to another window, I get
  ERROR:
  ORA-00257: archiver error. Connect internal only, until this just released.
  
  HOWEVER, what I find online tells me that the disc is full.
  Oracle is configured on a Windows Server, as follows:
  
  Total free walk
  Oracle-c (c :)) 50.0 go-go 39.3)
  Oracle-apps (e :)) 99.9 GO 91.2 GB)
  Oracle-logsA (f) 195 go-go 140
  Oracle-logsB (g) 83.5 83.3 go-go
  data-Oracle (h :)) 278 GO 150 GB)
  
  I stumbled upon this problem on so Friday and ran:
  RMAN > delete expired backup;
  and it "seemed" to solve the problem, which doesn't make much sense to me.
  
  So, I changed my PC a little today, to use a cursor and loop through each site and make the
  «* loop * insert records (...)» "selection (...) from records_load * where site = cur_row.site *, to remove at records_load * where site = cur_row.site."
  
  Now my db is blocked again, with a LOT of disk space.
  I don't really know what to do and would appreciate any suggestions?

  Free Flash Recovery Area (KB) 871.5

  Probably not enough free space to archive then redo log file

• Mobile library did not free disk space

  I got my Macbook GB 512 Pro flew a few weeks back and I bought a MacMini I have another laptop.

  The MacMini is only a 250G SSD and its already full.

  I have storage iCloud but everything still seems to want to live on my SSD.

  I moved the photo library (30G) of the SSD to a USB attached (formatted OSX extended) and naively expected to free up space when I deleted the original PL and emptied the Recycle Bin after you did.

  Unfortunately there were no releasing 30 g at all and I still have the same problem.

  My SSD Mac was / is also showing 20G of movies, all deleted or left the trashed SSD (and empty) - all this without release all space.

  I am unable to save or update my iPad Pro due to lack of space (about 10 G of free disk SSD) - The MacMini tells me that there is not enough space on the SSD drive.

  I is turned off and turned back on iCloud Photos and fact will restart but not luck. All my photos are safe in iCloud, so I don't really know what I have to do to free up space.

  Someone at - it ideas or experience similar issues?

  Thank you

  AJ

  For the other category in the display of information storage, see this support article. If the display appears to be inaccurate, try to rebuild the Spotlight index of the boot volume ("Macintosh HD", unless you have given it a different name.)

  Empty the trash if you don't have it already done. If you use iPhoto, emptying his trash internal everything first:

  ▹ iPhoto empty the trash

  In pictures:

  ▹ Show of the recently deleted ▹ file delete all

  Do the same thing in other applications like Aperture, with an internal feature of the trash. Then, restart the computer. Temporarily, which will free up space.

  According to the documentation from Apple, you need at least 9 GB of free space on the boot volume (as shown in the Infolog) for normal operation, not the mythical 10%, 15% or any percentage. You also need enough space to allow the growth of the data over. There is little or no advantage in terms of performance to get more free space than the minimum Apple recommends. Storage space you'll never use is wasted space.

  See this support article for some easy ways to free up storage space. A common waste of space is old backups iTunes to mobile devices. As shown in this support article, select the devices tab in the iTunes preferences window, select the backup that you want to remove and click on delete the backups. Keep at least a backup of each device you use yet.

  You can, if you wish, use a tool such OmniDiskSweeper (ODS) to explore the volume and discover what is take up space. You can also delete files with it, but not unless you don't know you know what you remove and that all data is stored safely. This means that you have several backups, not one. Note that the ODS only works with OS X 10.8 ("Mountain Lion") and later versions.

  IMPORTANT: This comment is neither a recommendation nor an endorsement of any third party software. You should always do your own research to determine if the unknown software is safe and useful. Don't take the word of anyone, including mine.

  Deletion of files inside a photo library or iTunes will damage the library. Such a library should be changed within the application that created it. It is the same for e-mail files.

  Go further than if the problem is not resolved by the steps above.

  ODS cannot see the whole file system when you run simply by double-clicking; He sees only the files that you have permission to read. To see everything, you must run it as root.

  Back up all the data now.

  Install the application in the Applications folder as usual. Quit it runs.

  Triple-click any where in the text line below on this page to select, then copy the selected text in the Clipboard by pressing Control-C key combination.

  security execute-with-privileges /A*/OmniDiskSweeper.app/*/M*/* 2>&-

  Launch the Terminal application integrated in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  Paste in the Terminal window by pressing command + V. You will be asked for your login password.

  The application window opens behind other open windows. When you scan a volume, the window will finally show all files in all folders, sorted by size. It may take a few minutes for the app to finish scanning.

  I do not recommend that you make a habit of doing. Do not delete anything as root. If something should be deleted, make sure you know what it is and how it got there, and then remove by safer alternatives. If in doubt, leave it alone or ask for advice.

  When you are finished with the app, he quit and also to leave Terminal.

• using time machine: I want to use time machine as a separate to free disk space storage drive

  Can I use time to free up disk space on my Imac?

  Writing an effective question of communities of Apple Support

  Time Machine is a backup software. If you mean that you're already using TM and you want to store other items on your backup disk, you can, but it is not a good idea and you will need to partition the drive. http://pondini.org/TM/3.html

• HP Pavilion 500-164 recovery disks came with instructions in Spanish, don't read not Spanish

  Good afternoon everyone.   I have a HP pavilion 500-164, barely a month and a hlaf old, which came in a kind of loop to the HP after a few minutes loading screen, a pink screen came up with a frown face alomng with a message that I have never read coiuld because his was too fast. I now have my recovery disks, but they sent the instuctions in Spanish. I do not read Spanish very well at all. I need to know if there is anythign iNeed know are to make this recovery instructions to tell me if I could read smoothly. I hope it's clear enough for yall to get what im saying lol.   Also if someone has a link to the instructions I have but in English please . Thank you for taking the time to read this and have a nice day.     (also can I just throw the disc and it will take care of itself?)  Don't want to screw up this high and still learning everything so if you have info anyu willo help I would very much apreciate. New Z'al

  You are the very welcome.

  You do not have an additional drive or in addition to disks 1-4, there is one labeled accordingly.

  Thus, you would have answered no to the question asking if you have an extra recovery disk.