Pavilion a6000n - change in diet

I'm changing the provision of prwer of the 250 W to 500W and I find that there is a connection of the power supply to the motherboard that the new power supply does not. Jose a small square 4 pin connection shaped just right of the CPU. This power supply can be used without this connection? I'm upgrading my video card to a Radeon HD6750 and the power supply will not quite manage it :-)

Hi blindmice,

According to the model 575 Logisys that you posted, the slot power connectors are included with the power supply.

If you do not have a P4 from the PSU connector, then maybe you have a connector P8 (8 pins) would have indicated a later revision level of the PSU.  If it's a P8, then it can be split or maybe you can try riding the P8, so that the pins 4 end of the connector on the power connector card mother ATX 4 pin.  You can always contact the manufacturer of power supply for confirmation.  You can also buy a P8 P4 adapter.

Tags: HP Desktops

Similar Questions

  • HP Pavilion a6000n desktop: adding false graphic RAM and freezes start.

    Well, I'm back with the same machine as the previous assignments.  I ordered the recovery of Surgeons of the computer disks and that they were unnecessary because the computer does not see any cd/dvd I have to install.  Finally gave up and ordered a Windows Vista recovery usb flash drive and installed the operating system.  I used it very well with the RAM minimum (1 GB).  I decided to upgrade the memory to use all 4 GB.  All four are recognized in the BIOS/Setup with the full 4 GB dispalyed.  The new brand of memory is Samsung.  Everything seems to be as it should.

    Here's the problem: the Windows splash screen appears with the scan progress bar and when it gets to the sixth pass it freezes as black and alternating vertical lines distorted graph color vertical lines appear.  It will remain so until I have shut down, because he has not answered all the keyboard commands.

    I removed two 1 GB modules and restarted without problem.  I've tried three, and he did nothing.  Swapped the output for the two 1gbs modules, I removed and they worked perfectly.  With four on board is the problem presented and only when windows is loading.

    I also tried safe mode.  All four ram modules work with the VGA drivers in safe mode without graphical distortions or freezes.

    I tried to restore the computer to an earlier time with the console of Windows Vista repair because he found from the problems and suggested this course of action.  When I did, he removed my Firefox browser.

    Has anyone seen this problem before or a solution?  Thank you for help.

    What follows is my computer information system:

    Name of the Microsoft® Windows Vista™ Home Premium operating system
    Version 6.0.6002 Service Pack 2 Build 6002
    Another Description of the OS is not available
    Manufacturer of operating system Microsoft Corporation
    Name of the system
    System manufacturer HP-Pavilion
    System model RX885AA-ABA a6000n
    System Type X 86-based PC
    Processor AMD Athlon (TM) 64 X 2 Dual Core Processor 4200 + 2200 Mhz, 2 Lossnay, 2 logical processors
    Version/Date Phoenix Technologies, LTD 5.13, 29/10/2007 BIOS
    SMBIOS Version 2.4
    Windows directory C:\Windows
    System directory C:\Windows\system32
    Boot Device \Device\HarddiskVolume1
    The local United States
    Hardware Abstraction Layer Version = "6.0.6002.18005".
    Username
    Daylight saving time from the centre of zone
    Physical memory (RAM) installed 2.00 GB
    1.87 GB total physical memory
    Available physical memory 775 MB
    Total virtual memory 3.99 GB
    2.49 GB available virtual memory
    Page file space 2.17 GB
    Paging file C:\pagefile.sys

    HP Pavilion a6000n specifications

    Before that I inform you of why 4 GB will not work, I will inform you of the steps, I took in coming to my conclusion.

    First of all, I found an old PCI VGA card and installed.  Then I started the installer and changed to display pci dashboard.  F10 save and exit.  I left Vista find the new hardware and drivers.  Power off and swapped the cable from the monitor with pci card.  Restarted.  Last good known Configuration.  Made to the desktop with large icons, display etc.  Power off.  Installed all four modules of memory of 1 GB.  The installer confirms the mms of 1 GB in all four banks.  Save and exit.  A frozen fourth passage on the starting Windows progress bar screen.  Display is now less than a hundred multicolored pixels (it looks like stars in the night sky) scattered across the screen with barely perceptible ms inside progress bar.  Killed power as no response to input devices.  Modules removed from DIMM0 DIMM2 (banks 1 and 3) and installed two 512 MB mms instead.  Power, entered installation.  Confirmed 1 GB, 512MB, 1 GB, 512MB in DIMM0-4 (banks 1-4).  Save and exit.

    Eureka!  Starts directly on the desktop with no complications.  Vista even automatically the Resolution 1600 x 900 display value.

    Power off.  Remove the PCI card.  Has changed from the monitor to the integrated connector cable.  Powered on the Setup where I changed the display on board.  Saved and get out.  Straight to the desktop.  All right.  Vista indicates on the installed 3,072 GB 3.0 GB.

    I had read a useless article on the HP Forum that said that HP had made disappear the memory alternative banks.  Thank you for that.  Thanks kaoutar to straighten me out on this.

    After studying the limits of memory on Windows os systems, I made a discovery.  Due to the limitations of physical or software address, Vista cannot use 4 GB RAM in the 32-bit operating system.  You must install os 64 bit where it can use 8 GB to 16 GB.

    Here are a few discussions of support, I found to cooberate my conclusion that 4 GB will not work on this computer, as this is with Vista 32 bit installed.

    Thanks for the reply and assistance EricoInstallation of Bank alternation of RAM modules corresponding coupled to the reduction of two of these 512 MB back is the solution.  It was an error of installation of equipment so many restrictions imposed by hardware and software manufacturers.  If I or anyone else, wants more RAM under Vista or 7, will need the 64-bit versions.

  • My HP Pavilion a6000n cpu upgrade

    I got this hp Pavilion a6000n friend and I basically rebuilt this computer, but I'm not sure what CPU I can go to. I've been watching this cpu for my computer. I am running windows 7 64 bit. This upgrade of the processor is possible for my computer?

    Edit: I also watched this cpu, if the other cpu is too powerful.

    Here are the specifications of your HP Pavilion a6000n desktop computer and its card mother M2N68 - LA (narrated). Based on these specifications, this model supports the following processors;

    Type of socket: AM2
    TDP: 89 watt
    Athlon 64 X 2 with Dual Core technology up to 5600 + (up to 89 watt)
    Athlon 64 4000 + less than
    Sempron less than 4000 +.

    Neither the processors you listed works on this computer.

    If you have any other questions, feel free to ask.

    Please click the 'Thumbs Up' white LAURELS to show your appreciation

  • HP Pavilion a6000n Phoenix Bios

    My 03/2007 Phoenix Bios is corrupted.

    My computer model: a600

    Product: rx885aa

    Manufacturer: ASUS

    name of the motherboard: M2N68 - LA

    Name card mother HP: narrated - GL8E

    Chip set: GeForce 6150SE apply 430

    Operating system: Windows Vista

    I asked the website of HP support for a download of the Phoenix bios, but wasn't able to find a download link.  Anyone know how I can get the Phoenix bios and provide a link for download.   Or is there a way someone can provide me with the bios, if they have it?  I need to Flash my bios with the original Phoenix bios with purchase of HP Pavilion a6000n desktop.  Any help will be greatly appreciated.

    The bios updated to the a6000n HP is available since 09/2007.  Since then, there must be dozens of people who made the update to the bios and have fried their PC. You'd think with so many people having problems, HP fired the update of the bios on his website... or at least to give some sort of warning.  I can see why HP has let the update of the bios in place however.  Those who have made the update and fried their PC still needs access to the exe file posted to extract the ROM to Flash their bios corrupt 513...

    In the interest of those who have the misfortune to do the update of the bios and the frying of their PC, take heart that their PC can be fixed.  I won't be able to make myself the fix until I have access to another PC.  But I'm pretty confident that the fix will work, because it has worked for others with the same HP computer.  The solution to the problem can be found in the material category of this forum under the thread "HP #a6000n bios checksum error after update bios.  It's a pain in buttocks for manually flashing bios corrupted, but it will be well worth the effort to get your PC up and running again.

    Just shame on HP for show lack of interest to its customers.

  • Device driver EP1 int unplugged, got this message after I changed my diet

    got this message after I changed my diet, made sure all connections are on any clue?

    only seen once via plug and play, after that he ceased to appear. except that all right

  • HP Pavilion A6000N Panel before wiring diagram

    I was fixing a friend out of warranty HP Pavilion A6000N desktop and had to replace the motherboard. I installed the Asus M2N68-AM Plus mobo which is very similar to the Council of M2N68 - LA used in the original. Only problem is that I still was able to find a diagram pinout for the reader of card usb/audio/power front panel so that I can return his pc to him. Any help with this would be greatly appreciated that I tried to stick to the closer the original as humaly possible specifications.

    Here is a link to the zipped Manual:

    http://freemanualonline.blogspot.com/2011/03/ASUS-M2N68-am-plus-manual-user-guide.html

  • HP Pavilion a6000n - improvement of the system. Need help with the decision and suggestions

    Hi all

    I have a HP Pavilion a6000n, spec even with this link , except that I have 3 GB of memory and Window Vista Home Premium 32-bit.

    I think to update some of my computer hardwares that can run more smooth in some games and to improve my gaming experience.

    I'm looking to replace the processor and graphics card.  At the present time, I have an AMD Athlon (TM) 64 X 2 Dual Core Processor 4200 + 2.2 and a NVIDIA Geforce 6150SE nforce 430.

    My price range is around $100-$200 for processor and graphics together.

    I looked at cela processor and graphics card

    They will make a big difference and improvement than what I have at the moment?   If this isn't the case, then can you guys give me some suggestions on the choice of the better ones out there?

    Thank you!

    You have only a 300w ATX PSU (Power Supply Unit), then you will need to update if you plan to install a good graphics card.  Check the manufacturers minimum power required for the card you decide on getting.  As for the CPU, it does not require the upgrade - the graphics card is what causes your performance problems (in the games).  I would like to spend more money on a power supply and graphics card and leave the CPU alon (so far )

    Message edited by Kalt on 05/12/2008 23:18
  • 550-142d Pavilion: the change of graphics card BIOS update

    Hello

    I have a Pavilliion 550 - 142d I want to update to provide a better gaming experience. The map pre-installed in the Pavilion is 730 GT that does not happen at the end of game.

    The graphics card, I intend to buy is the GTX950 or GTX 1060.

    I did the necessary research on upgrading the graphics card.  But I discovered only recently that I need update the BIOS when changing the GPU.

    What are the precautions or steps I have to take in what concerns the updated BIOS to support the new graphics card?

    I just finished replacing my PSU 550w successfully today. The only problem I encountered was that I didn't have a slim-SATA to power the built-in DVD player. I intend to get an adapter SATA slim finally.

    I will proceed to the graphics card vendor soon, please advise me on the supported BIOS I knew HP has an integrated program to monitor and update a driver accordingly. As such, I worry if the GPU card support is in place. Currently, I don't have any other NVIDIA program installed to update the GPU card.

    Thank you.

    Hello

    Thank you for your concerns.

    I raised my BIOS to version A0.13 (Dec 2015) and the latest version is A0.16 (August 2016).

    I need to update the BIOS before or after changing the component?

    As I predicted to change the GPU, my only question is if I have a correct display of the monitor if I were to run the update after the upgrade. Please notify.

    Thank you for your help.

    Concerning

  • Pavilion g6: change the processor in my laptop

    hp1840 map of mother (U3E1) I'll have my laptop with processor i3-2370, is it possible to change the processor that will be compatible on the motherboard? Please help me if and its a 2 GB graphic card radeon thus again slowing down work.

    Manufacturer Hewlett-Packard
    Model 1840 (U3E1)
    56.2 C version
    Intel chipset provider
    Sandy Bridge chipset model
    Chipset revision 09
    Southbridge Intel supplier
    Southbridge model HM76
    Southbridge revision 04
    56 ° C, temperature of the system
    BIOS
    Brand Insyde
    Version F.14
    Day 20/09/2012
    ICP data
    PCI slot
    Type of PCI slot
    Use of the available slot
    Data channels x 16
    Slot designation PCI Express Slot 1
    SMEs, hot-plug features
    Slot number 0
    PCI slot
    Type of PCI slot
    Use of the available slot
    Data channels x 1
    Slot designation PCI Express Slot 2
    Features 5V, 3.3V, SME
    Slot number 1

    The manual seems to tell us that you can install an i7-3632QM, which is a great leap from what you have. So and if I'm trying to get a second opinion from @erico so I do not send you to a dead end. But I'm sure you can.

  • 2192el Pavilion dv6: change the motherboard

    Hi all. In my book, there is a motherboard 3659 32.25. But I can change the motherboard? And if so which?

    k

    Hello

    Looking at the Maintenance & Service Guide ( Page 76 ), the Council only listed system is one that you have already - that is to say graphic with dedicated 1 GB memory.

    In general, even if there is a better option, at the time wherever you take into account the cost of the Commission, editing and "tattoo" the bios to make your oem windows remains on, it is usually cheaper to buy a new laptop with a better graphic option.

    Kind regards

    DP - K

  • Retired HP Pavilion a6000n PC and can not find the driver for Network Card card do? Download Driver?

    Gradient of the Visa OS came with the PC for XP.  Installed new HD and partitioned drive so there is no pass file.

    I found that it is management of network integrated 10/100 Base-T interface but cannot find the manufacturer to use it Web site.  In addition, been

    playback ChipSet might need drivers or upgrade?  Don't know that much about this, but enough to get in trouble if

    I'm not "coached" through it all.  Low grade was the Visa MS HP accompanying MS XP Professional.                               Need a link or help find the Driver for the network card.

    Thank you.

    Thank you very much... which seems to do the job for letting me use the network card.  Once I installed the chipset you me too, my IE was able to get the net.  The only thing that happened that I wonder about, what I choose to accept or not something RAID, which I accepted and it seems to work with one small annoying side affect: I can't get Windows Update to run.  I get this error: 0x8024400a and I spent literally hours looking for and trying different solutions, which none have worked. Do you think that there is something that would change this Nvidia software which would cause that?   I get out to the internet OK and can go to any web page.  It runs a bit slow, but I thought it might be because I'm using a newly installed Win XP and it has only 2 SP.  My next step in getting this thing to work was to run Windows Update and anti-virus stuff set.   Any way, thanks again for your help.

  • by turning on the computer the sound wav plays always the value by default even if I changed my diet and renamed it

    When you turn on the computer default wav sound still plays even if I changed the system and renamed it

    Hello

    1. which version of the windows operating system is installed in the computer?

    2. have you made any changes to the computer?

    Method 1:

    If you use windows vista and windows 7, I suggest you perform the clean boot and check.

    Place the computer in a clean boot state, then check if it helps. You can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135

    Note: After troubleshooting, make sure the computer to start as usual as mentioned in step 7 in the above article.

    Method 2:

    I also suggest you to see link and check.

    Change the sounds of the computer

    http://Windows.Microsoft.com/en-us/Windows7/change-computer-sounds

    http://Windows.Microsoft.com/en-us/Windows-Vista/change-computer-sounds

  • HP Pavilion a6000n: no need for replacement motherboard - it's the standard micro ATX?

    I want to upgrade this computer and get a new card mother and CPU. Currently there is a M2N68-LA/NARRATED-GL8E made by Asus for HP. No matter what micro ATX motherboard will work, or that it has an odd size or placement of screw hole or else incompatible?

    Thank you!

    In case anyone is interested, I picked up an ASRock 970 M Pro3 AM3 mATX Motherboard AMD and a 8-core processor from AMD FX 8320E. The motherboard was a little shorter than the origian, then the bottom screw holes align. But it is strong enough and it works fine.

    There, however, no place to plug in the SD card reader, or the front firewire. I do not use firewire, so this isn't a problem, but I'll miss the SD card reader. It's one thing that I forgot to check when looking for motherboards.

  • HP Pavilion p6290d: change to smaller capacity desktop hard drive using the recovery disks

    Currently my hard drive (750 GB) is having a problem. I have a spare hard drive (500 GB), I can replace the 750Go with the 500 GB hard drive using the recovery disks that I created when I got the pc?

    Hello:

    All I can say is that you have nothing to lose to give a try.

    500 GB could be sufficient to allow the recovery discs, you did to work.

  • Pavilion 15: Change the email preview and playback of the shutters on Windows 10

    I would like to reduce the size of the email preview pane and remove the screen when I read an email.

    @czman

    @banhien is correct - the standard display may depend on your application.

    The default e-mail application may not have an adjustable slider for the side of view files - the size of the view 'files' automatically adjusts the size of the overall mail, screen app.

    You can, if you wish, open an email and then push this single email in a window - then you can drag the divider between the two windows completely to the left (temporarily) close the main mail window and leave the email "single" on the screen.

    Example:

    When you see a post that will help you,

    Who inspires you, gives a cool idea,

    Or you learn something new.

    Click the 'Thumbs Up' on this post.

    My answer-click accept as Solution to help others find answers.

Maybe you are looking for

  • TextEdit cannot access his folder specific icloud

    Hello using my iPhone, iCloud Drive App folder show a lot of specific App, specifically "TextEdit" folder. using my iMac (CAPITAN) neitheir TextEdit or Finder view the folder "TextEdit"; TextEdit, using the menu Save under and by selecting the "iClou

  • Replacement wireless Mini-PCI on PLL10E NB100-12 s

    Greetings from Barcelona! My question is, if this would be the replacement rate card Wireless miniPCI possible for Wireless-N. I mean if the motherboard support this type of card. The map in question is (in Spanish): Link: [http://www.ciudadwireless.

  • HP 2000-2d29DX Notebook PC: intel rst service does not work

    Recently, I noticed the icon in the lower right of the screen showling the intel rst service does not work. In the past, I saw the icon, but it would correct themselves after a few minutes. A week ago I downloaded the Speedy PC Pro registry cleaner.

  • Equium U400 Windows Vista graphical glitch

    Hi all I ve recently purchased the above machine and I would have been very happy with it if it wasn't graphical glitch. It usually appears after a few minutes of work, and it blurs the colours, to look like twisted enough (IE background is for examp

  • Compaq presario cq62-219wm cpu update

    We have a laptop, compaq presario cq62-219wm. Intel celeron 900 to 2.2 ghz (800 mhz). Windows 7-64 bit o/s. y at - it a cpu I can go to for this laptop? the celeron is a w/single core wire I think. I would switch to a dual-core (at least) if possible