Pavilion DV6915NR - issue of Board/LCD system

Similar Questions

• downgrade a HP Pavilion DV6915NR

  Hello, want to install XP instead of Vista on my new machine (DV 6915NR). I found posts for DV6920, apply to my machine too?

  Thanks for any help...

  Thanks a lot for responding so quickly!

  Yes, I have an AMD turion X 2 TL-60, nvidia and Atheros chipset wireless.

  I just finished the recovery DVDs and I downloaded all the drivers recommended by HP:

  -NVidia nforce 630 drivers,.

  -NVidia GeForce 7150,

  -HP wireless assistant

  -Lightscribe drivers,

  MS - UAA

  -Conexant Audio 221.

  -Quick Launch buttons

  -Ricoh card reader

  -flashBIOS

  -.NET framework

  -Synaptics Touchpad.

  I put them on a USB key.

  Thank you very much for the link of the Jonas, it seems quite enough!

  I let you know the results...

  -----------------------------------------------------------------------------

  Pavilion DV6915NR, Vista SP1 (not for long), AMD Turion X 2 TL - 60 2.0 GHz, Nvidia GeForce 7150, 3BB RAM, 200 GB HD ST9200827AS.

• Pavilion g4: startup stops at UEFI "System information" screen

  I'm working on Pavilion laptop g4 a friend for which he asked me to do a fresh install of Win7 Home Premium.

  This is my first experience with the new EFI "bios" and it turns quite a steep learning curve!

  I am at a loss to understand why every attempt to restart stops on the "system information" screen (rather than new startup in Windows):

  

  I was able to successfully install Windows, but each causes to restart the sequence to stop at this same screen which makes it useless (for example) to perform a session support with a boot like TeamViewer tool that requires the computer to boot into Windows without supervision.

  I spent more than a week of research on this issue and have not found someone with a similar experience. Therefore, I hope that someone here can help provide the solution.

  If several sreen hats are needed, feel free to ask.

  Thanks in advance!

  It's unfortunate... I expected that someone would have solid information to provide that at least I pointed in a direction that I could continue my investigation.

  I don't care... I come back my friend g4 Pavilion this weekend since I was hanging on it hoping that I would be able to resolve the startup problem before doing so.

  So I'm marking THIS "resolved."

• New Pavilion laptop issues

  Hi Paul here.  It's my first post so bear with me. Enjoyed all the advice for the correct way to publish in the future.  I have a Pavilion DV6t-7000 2 month old laptop.  Assistant support HP recently updated Bios F.13 all was well with the update of the Bios.   My question is Hp quick launch won't launch by clicking on fingerprint reader or more.  Its icon is displayed in the system tray. Fingerprint reader works great for login password of the computer.  My DVD drawer opens also untimely sporatically.  DVD record/player works fine.  These issues seem to arise after the Bios Update.  All other computer functions work fine.  Have been in contact with HP support. no resolution.  Thank you Paul

  Hey Paulsuzuki,

  I assume you have Windows 7?

  If so did you install the new drivers for quick launch of the site under Software-Solutions?

  http://goo.GL/mTvLd

  Also, here is a document that could help you in the future.

  http://goo.GL/CL48x

  THX

• HP Pavilion dv2700 laptop displays the message "system CMOS checksum failed" every time you start

  

  Hi @all,

  I have a HP Pavilion dv2700 - kh933ea laptop computer #abv (it is a HP Pavilion dv2799ee Special Edition Entertainment Notebook PC to be exact) that displays the message "system CMOS checksum failed. Press F1 to continue"every time you start the system. My OS is Windows 7 / 32 bit.

  Then I updated my BIOS to version 2.4e, 01-dec-08 Phoenix (the SMBIOS version remained the same before 2.4), but the issue is not resolved. I have attached a screenshot for processor and BIOS versions.

  Can someone guide me on how to solve this problem?

  Thank you very much in advance.

  I don't see the screenshot of your post attachments. Please repost them.

  This error message means that WHAT BIOS is damaged. You will need to have the BIOS flashed in a mobile shop, repair a BIOS or an HP Service Center. Do a search online with Google or Bing repair for a BIOS.  If you keep trying to update the BIOS there will come a time where everything you have a black screen.

• HP Pavilion 11-k000nf: password administrator and system disabled.

  Hi all expert HP!

  Hi have pc HP pavilion 11-k000nf and me there administrator password has failed and I forgot...

  System off and me there numbers if [67451694]

  pliz help me thanks Expert HP you very much everything!

• Laptop HP Pavilion DV2000: install a new operating system on old laptop

  I have the laptop model is consistent with the provisions, it's old, I know.  It seems not to have an operating system.  How to install a new operating system without knowing which key?  It is said that it was Windows Vista.

  Is this a good version to go with?  Can I install a new?

  Hi @melba35,
  
  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!
  
  I stumbled upon your post on the laptop and wanted to help you! I looked into your problem on your computer HP Pavilion dv2000 CTO Notebook is compatible with Windows Vista 64-bit. Here is a linkto Microsoft to find product key most of the time it is on a sticker on the laptop.

  You can also order discs here.

  Please let me know how it goes.
  
  You can say thanks for trying to help, by clicking on the Thumbs Up below! .
  
  Thank you.

• HP Pavilion Slimline s5-1414 connection LCD monitor & projector problem

  I bought a HP Pavilion Slimline s5-1414 with Windows 8, for my church, which came standard with 2 DVI ports. I attach a LCD monitor to 1 Port and a projector to another. Start the computer and both screens remained blank. I disconnect me the projector, restart the computer and the monitor running normally. I then connect the projector in the other port and it works as expected. However, when I restart the poster blank rest until I have do as above. I also reset the BIOS to the default settings, and both screen and projector came fine. Yet once, when I restarted, same problem. I manually set the resolution for both devices. Problem remains - every time that I reboot, displays may not run until I disconnect the projector, reboot, and after successful reboot, reconnect the projector. Any suggestions?

  Thank you for running these tests and getting back to me. I think that it is prudent to exclude at this stage of material. I have two options for you to try.

  I would like you to reinstall the graphics driver.

  Press the Windows key + Q to bring up the search

  Type 'unit'

  Click on Device Manager

  Expand graphics cards

  Double-click Intel

  Click the driver tab and click the uninstall

  Restart the computer

  Windows will automatically detect the missing driver and reinstall it on reboot. Once you are in the start screen of Windows, shutdown, connect two screens (a screen and a projector or two monitors, anyway) the computer turn on and I would like to know what the results are.

  I would also try both screens set before to turn on/off mode safe. You may need to press and hold the ESC key lighting to get the option come up, instead of SHIFT F8 as set out in section. Take a look at this article to get the procedure start mode safe. Let me know what you find

• HP Pavilion 15: HP Pavilion 15 BIOS password rest (disabled system)

  I have a HP Pavilion 15 which gives me the 89245357 disabled system. I removed the Admin password, but I forgot to remove the PowerOn password

  Hello

  Enter 36123999

  Kind regards

  DP - K

• HP Pavilion 23-g013w: recovery of operating system, replace hard drive and memory now what?

  My hard drive stop working on my HP Pavilion 23-g013w all in one computer. I replaced it with a new 1 TB hard drive. I also installed new memory Crucial upgrade to 16 GB.   All new "hardware" is installed on the computer. When he came she said "Please install operating system on your pc" I ran to the verification of memory and the hard disk check and they both passed.

  I had this all in one at Wal-Mart 2 years ago and it did not come with the recovery disk or they were lost.

  Is there a way to connect with ethernet and download the software, I need?

  Otherwise, what is my next best option... .or not?

  Thank you.

  Thank you very much for the help.  I will continue to "hold" on the line...  Good day.

  Aaron

• HP pavilion DV7-4026TX: replacement of LCD for HP pavilion DV7-4026TX

  Hi guys,.

  As my lcd screen is not working properly (green is on the screen), I would like to order a replacement, but I discovered that there are 3 number of parts that are not suitable for my model (HP pavilion dv7-4026TX), that should be the right pair to order?

  605324-001, 605325-001 & 605327-001

  Any help would be appreciated!

  Thank you very much!

  Here is the Service Manual:

  Manual

  I actually see this:

  For use only with the HP Pavilion dv7 Notebook PC computer 40xx models 605337-001

  Therefore, it appears none of those you have listed is the right one.

  This is the one above on eBay:

  http://www.eBay.com/ITM/laptop-LCD-screen-for-HP-605337-001-17-3-WXGA-/171666956363?PT=LH_DefaultDomain_0 & Hash = item27f825e04b

  The smartest thing is to remove the old Panel before you buy a new. The part number of the manufacturer (Samsung, LG, etc) screen down from the back of the Panel and make sure that you understand how it connects and then store the Panel-based and not by part number of the manufacturer of the laptop. You will have a wider choice of products and you'll be sure of the compatibility and maybe even save a buck or two. Panels of the screen are a part of the product and the same panels will be used in many models of laptop by several manufacturers. If you really understand what you're doing you can use any display of the same type of resolution and the connection, but you must make sure that all the plugs are the same.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• system off: Pavilion dm4-1173cl laptop '69112228 off system '.

  Machine: HP Pavilion dm - 4 cl of 1173

  Problem: 'SYSTEM OFF 69112228 '.

  1.) had password on boot enabled.

  2.) on the startup, received message to enter the startup password ('enter the password administrator or power on password')

  3.) took 3 tries (keyboard not responding does not correctly) to type the 8 digits of start

  4.) when I typed in password on startup, I get the message "SYSTEM DISABLED 69112228.

  Now. . (a few days later) when I start the laptop, I get say message blue screen:

  'Enter password administrator or power on password' - but now the keyboard does not allow me to enter the password in the startup.

  Can anyone help please?

  SOS!

  Hello

  The only solution is to remove the CMOS/RTC of the device battery and wait 15mintues then reinsert on and check. Link given below for reference check 46 Chapter 4 removal and replacement procedures

  Manual link

• HP Pavilion dv6 Notebook PC: restore the system and drivers

  Hello. A few days ago I faced a bad experience with my laptop HP Pavilion dv6 Notebook PC. System crashed. At any time, I tried to turn it on, an error message appears and the system was blocked. The message was: FILE: \BOOT\BCD status 0xc000000f, asking for the disc of Windows 7 system running. But the system disk did not run at all. I checked the situation and found the hard drive with 6 partitions instead of 2. I found a named partition BOOT (X which was a replica of C:.)  When I tried to restore the system with the recovery disc, something has obtained control of the recovery disc, so that C: might not be formatted; nor was X:. Also, I tried to cancel the file in X: but disc was protected and does not allow changes. If only I could get my uninstalled hard drive and all partitions have been cleaned. I got my hard drive cleaned perfectly, but my recovery disk can be installed correctly. So, the system has not yet restored. My question is: what should I do to get my laptop with the system restore? any ideas?

  When you request support, please provide the number full name or product model of the HP computer in question. HP/Compaq made thousands of computer models. Without this information, it can be difficult, even impossible to help you solve your problem.

  The information requested above are at the bottom of your computer or inside the battery compartment. , Please do not include your serial number. Please enter the product/model information in the HP Online Support page for consumers , and/or post it here for our review.

  

  Based on the age on your computer, it could come from the factory with the scores 5 or more. It is common on newer computers that use UEFI and GPT partitions. "Windows 7 system disc", the computer asking wass is a Windows 7 repair disc or a Windows 7 installation disc. None of these discs come with your HP computer and must be downloaded or created in Windows.

   

  Start by using your HP recovery disk set (should be DVD 3 or more). Insert the #1 disc and restart your computer to start the process. Insert the remaining disks as requested, until the recovery is complete.

   

  If this does not work, and you can read the product key 25 character Microsoft Windows 7 on th COST Microsoft attached to your computer, see "How to install Windows 7 without the disc" for download Windows 7 SP1, create the Windows installation DVD and install Windows 7.  If you prefer to install Windows 7 from a USB Flash drive, please download the Windows 7 USB/DVD download tool to create a Windows 7 SP1 USB Flash Drive. After the installation of Windows by using this method, you will have is more HP or software customizations. You'll also need to identify and download the drivers for hardware devices that Windows 7 does not already provide drivers for.

  If you have any other questions, feel free to ask.

  Please click the White Star of KUDOS to show your appreciation

• HP Pavilion DV4000: BIOS password lock disabled System Code 10879

  Help!

  I have a laptop HP Pavilion DV4000, on what I'm trying to install Ubuntu.

  It seems that a lot of the devices (such as wireless card) has been disabled in the BIOS.

  The bios is password protected, and I can't get in.

  After trying 3 times, the bios screen responds with system disabled with code 10879.

  I tried a few other passwords, etc., but none of them worked.

  Thanks for your help!

  Hello

  Try to enter: trwpgqe

  or

  ekhte

  Kind regards

  DP - K

• Example: Pavilion 2000: how to bypass disable systems

  Portable power and nothing but black screen.  F10 tried power upwards and got the administrator password.  I have no password.  Three attempts and system 88023509 with disabilities. How can I get the pc to boot without password? HP Pavilion 2000-2b89WM

  @morgandale24

  Enter 37981529

  Kind regards

  DP - K