M40 Diagnostic tool - PC does not start

Similar Questions

• Satellite M40-129 BSOD and does not start correctly

  Hi again.

  I was working on my computer since my last question, but (almost) nothing has changed.
  The problem:
  My laptop is booting, but only on very rare occasions.
  What can happen:
  -l' screen stays black (almost 50% of cases)
  -L' splash screen (Toshiba - in touch with tomorrow) becomes visible and nothing happens then (40%)
  -Notepad starts "correctly" (10%)

  If the notebook starts correctly there are 2 options:
  1st: I try to start Windows: it crashes with a blue screen with the nice request an update of the BIOS.
  2nd: I boot SuSe Linux: EVERYTHING WORKS!

  I tried to update the BIOS the traditional way, although it is difficult to get it started it runs until shortly before the end and restart the computer.
  I don't see any confirmation screen as Im used to.

  What I assume, that the associated BIOS startup problem.

  I read a method for recovering the BIOS with a floppy disk, where you copy the BIOS. ROM disk and start the computer with the disc.
  My question is: is this also possible with a CD (have no floppy drive), if yes: how to proceed?

  I wanted to give a point of service of Toshiba, but if they can't fix it, I always have to pay 50 euros. I have to pay money to get my BIOS restored, but the service seems to be just a "-delivery service" the real point of service and I would like to speak with a qualified person, first :)

  > I read a method for recovering the BIOS with a floppy disk, where you copy the BIOS. ROM disk and start the computer with the disc.
  > My question is: is it possible with a CD (have no floppy drive), if yes: how to proceed?

  Hmm, you said that you have already received the traditional BIOS files from the ASP in your country. Then maybe you should take a look at this Toshiba document:

  [How update the BIOS on my Toshiba laptop and where can I get the latest version of the BIOS for my machine? | http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/faq.jsp?z=234&service=EU&from=faq_selection&CFID=B IOS & FID = TRO0000000b07]

• Windows 7. Diagnostic policy service does not start.

  Hello

  No Internet.

  Error 5 access denied.

  Need help ASAP please. .

  Hi Noel,

  Thanks for posting your query in Microsoft Community.

  Let me ask you;

  • You receive an error message?
  • What is the task that you try to start the DPS?

  From now on, I would suggest trying the following steps and check.

  Go to Start > search and type in cmd > click right on returned cmd.exe and select 'run as administrator' (click Yes to UAC prompt)

  Type the following commands one by one and press enter

  net localgroup administrators / add networkservice

  net localgroup administrators / add localservice

  Exit command prompt by typing exit and pressed enter or simply X out.

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• Vista does not start, fails to Startup Repair indicating that the version of the operating system is incompatible with Startup Repair tool

  I use a laptop Dell XPS M1330, under Vista Home Premium 32 Bit. The laptop froze, I tried to do a system restore, which did not work. Now the laptop goes into startup each time put on repair. A message window appears saying "Startup Repair cannot repair the computer automatically. Startup Repair window says "Startup Repair could not detect a problem. Diagnostics details say: Root cause found: the operating system version is incompatible with Startup Repair tool.

  I tried to use the Dell Factory Image Restore to restore the system, but it does not end. I get an error message instead. There is no details, it's just a small window with an X and the Word error.

  I also tried to use resettlement Dell DVD, but that doesn't seem to work either.

  Vista does not start at all, not in either safe mode.

  I just ran to the Dell Diagnostics tool, and that is to say that the integrity test of memory has failed... No idea how to solve this problem?

  I'm at a loss and helps woukld be appreciated.

  Hi James,

  Ø are you using the correct version of the Vista disc to run Startup Repair?

  I suggest to run the diagnostic tool memory WINRE mode and check if the memory (RAM) installed on the computer works fine.

  Follow the steps below to start the computer using the WINRE and run the memory diagnostic tool.

  A. Insert the Windows Vista installation disc.

  B. restart your computer.

  C. Si you are prompted, press any key to start Windows from the installation disc.

  Note: If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer. You may need to change your computer's BIOS settings. For more information, see BIOS: frequently asked questions.

  D. choose your language settings, and then click Next.

  E. click on repair your computer.

  F. Select the operating system you want to repair, and then click Next.

  G. in the menu system, SelectMemory diagnostic tool Recovery Options.

  Once scanning is complete, check to see if the problem is resolved.

  Access the link below to learn more about Windows recovery options in Windows Vista.

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-know-if-my-computer-has-a-memory-problem

  If you have several sticks of RAM installed on the computer, you can try to remove one of the RAM stick and check if it works very well. Also, you try to exchange the RAM sticks and check if one of the RAM is originally this issue and if it needs to be replaced.

  Note: If you are not aware of the evolution and swaping the stick of RAM on the computer, it is best to contact the computer manufacturer for help on this and you can do it at your own risk.

  You can also contact Dell support and check if you need to replace any hardware.

  I hope this helps. Let us know the results.

  Thank you and best regards,

   

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Photoshop CS3 does not start with popup indicating that "licensing for this product has stopped working" I tried uninstalling and reinstalling 3 times, including after you run CCCleaner tool.  Any help would be appreciated?

  Photoshop CS3 does not start with popup indicating that "licensing for this product has stopped working" I tried uninstalling and reinstalling 3 times, including after you run CCCleaner tool.  Any help would be appreciated?

  Same fixed.  At executed license repair tool, Adobe - Adobe licensing repair tool, and it fixed the problem.

• Lightroom CC (2015) does not start under win 10 of the programme. The diagnostic program announces that Lightroom is not compatible. I have installed several times and disconnected. LR does not start. Program of liver, but it does not work. How can I fix

  Lightroom CC (2015) does not start under win 10 program.
  Program diagnosis announcement only Lightroom is not compatible. J’ai installed several times and disconnected. LR does not start. Hepatic program, but it does not work. How do I correct?

  CHETNA Hello!
  It works again! Thank you and have a nice day!
  Snowy greetings from Finnish Lapland.

  Thank you

  Veikko Hamara

• Satellite A300 - rotates but does not start

  Hello

  I have a Satellite A300. I had several probems for the boot since 2 months ago: when I want to turn on my laptop, it turns on but the screen keeps black and it does not load the screen "Toshiba Leading Innovation". 'Satellite' (to the left of the mouse) light is on (it would go only about a second then to start and then turn off) and it will turn off.

  I try again for so many times with all the possibilities: without battery, only with the power adapter, two, but it does not start. I don't know what I can do. I always Hibernate my laptop because I'm afraid of can not start it the next day.

  Could you help me? If she cares: I had to buy a new battery (not original from Toshiba) because I had to change the original. No more changes to my laptop.

  Thank you very much and sorry for my English written: S

  Diego

  Hey Buddy,

  > I had to buy a new battery (not original from Toshiba) because I had to change the original. No more changes to my laptop.
  Of course, it s always advisable using Toshiba original spare parts only, but if you notice the same problem with AC adapter only it s not related to the new battery.

  Just to make a better diagnosis: If you have connected an external monitor? The internal display is perhaps the problem and doesn't turn on and it would be useful if you are testing the situation and an external monitor.

  But this noise as a hardware problem serious and in this case, you can wait to contact an authorized service provider. Technicians professional diagnostic tools to make an accurate diagnosis and to Exchange defective equipment parts.

• Satellite L500-164 does not start sometimes

  Heyas!

  For most laptop does not start on the first attempt. The Power LED lights up, the cooler and the HARD drive start (it looks that they rotate exactly once) and that's it. After a few seconds the laptop turns off again. There is no screen and the LED on the HARD drive also not would light up. If that happens, I start the laptop again and again. In most cases I need to start 2 - 3 times, but once I had to start 20 times until it worked.

  I also tried to start just with the power supply (I hope that's the right word for it, I'm German = D) and took the battery out of it, but the result was the same.

  But when the laptop finally started, it works without problem.

  Greetings,
  Daniel

  It is not easy to say what the problem is but it certainly is hardware related issue and your laptop must be verified by the authorized service partner Toshiba. With the help of diagnostic tools that they can find out why this happens.

  Here in this virtual world we can only speculate on the possible reasons.

• Envy of HP dv7t quad laptop: laptop does not start

  My laptop does not start I get the message.

  Computer does not start. "A required device is not connected or is not accessible.

  Error code: 0xc0000185

  Using diagnostic tools, I get these results:

  Quick check memory: failed

  Hard drive short DST CONTROL: WARNING

  I am "spent" for the rest of the diagnostic checks.

  Thank you

  khosrowbp

  Your hard drive is failing, fast (these things last forever). You need to replace as soon as POSSIBLE. If you have important data on what cannot be replaced I suggest you plug it into another computer as an external drive and pulling all the data you need it off.

  If you do not have the possibility to connect the drive directly on another PC, you can download a live Linux CD/USB.

  Step 1: Acquire a blank CD or USB. If you use a USB port, format it in FAT32.

  Step 2: Insert your chosen in your PC Backup media.

  Step 3: Download Unetbootin.

  Step 4: Select a distribution in the drop-down list. Just about anything will work, but for your application, I would recommend "Puppy Linux".

  Step 5: Select your media.

  Step 6: Once Unetbootin is complete, insert your media in the PC is installed on the corrupted hard drive.

  Step 7: Boot puppy. (You may need to select your Flash DRIVE or a CD in your BIOS)

  Step 8: The use of the included file manager, mount the hard drive and browse for the files you need. You can then save these on another DRIVE or a CD drive, or the internet.

• HP ENVY laptop - 15-k101nx: HP envy 15 does not start after failing to set up

  Failed to configure Windows (it took so long and shows no percentage) so I turned off my laptop, removed and unremoved battery and turned on it. The problem is it does not start and the screen is all black with little light on it.

  What I've done so far:

  -J' tried to restore the BIOS by following the instructions here say: http://support.hp.com/ee-en/document/c02693833 ; However, I still have the same problem after restoring the BIOS.

  -J' also tried a few hardware diagnostic test, he failed in the test of ' disk hard short dst check "and gave me chess and product IDS.
  -He also failed in the Startup Repair tool

  My laptop is still covered with warranty accdg here 'http://h10025.www1.hp.com/ewfrf/wc/weInput?lc=en&dlc=en&cc=us&tmp_weCountry=&tmp_weSerial=&tmp_wePro... '. but the characters upon receipt of my laptop is already melted aways since they are written on a thermal paper.

  BTW, I can always open the command prompt and the research on the C: drive and see my files, but don't know what to do whenever I used the chkdisk command, it asks me to do things I'm not familiar with.  I just heard that the chkdisk command solves the problem temporarily.
  
  What do you think are the alternatives and solutions to the problem of my laptop?

  Yes the hard drive needs to be replaced. Just call support and they will have it replaced for you under warranty.

• HP G72 laptop: HP G72 laptop does not start, error code of disk hard when you use HP Diagnostics

  I have a laptop G72 and it will start, but Windows 7 does not start. On using diagnostic tools in the start menu, my hard drive and my departure fail their tests, with both giving me this error code:

  UCUFWF-56C81D-XD003G-60WF03
  

  No idea what this means? Help is appreciated.

  Hello

  You are welcome

  Your computer is listed as coming with a 320 GB hard drive, but you can also easily install a 500 GB HARD drive if you want a little more space - the player on the following link is an example that would be perfect for your laptop.

  Hard drive 500 GB

  The procedure to replace the hard drive begins on Page 50 of your & Maintenance Guide.

  Once this is done, simply use your recovery DVD to reinstall the operating system on the new drive - this is described in the document of HP here.

  If you do not have your recovery discs, see if you can order a replacement set using the link below.

  Order HP recovery disks.

  If you have a problem with this link, order them directly from HP.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  Best regards

  DP - K

• I have a Toshiba Satellite A85 with XP Home Edition series. Windows does not start. At startup I get Toshiba logo then a black screenwith cursor upper left. Can I save it?

  Toshiba Satellite A85 Celeron with XP Home edition. Windows does not start. I have Toshiba logo screen, then it turns into a black screen with the upper left corner of the cursor. I have the recovery disk. Is it possible to record HD without re-formatting and losing all data?

  Thank you;

  Lobo77

  If you run the Toshiba recovery application, you will lose all your data.  As indicated in the warning, this application will restore the computer back to wherever it was when it was first delivered by the factory.

  Without other complementary diagnostic information, it is difficult to determine what is happening.  Pressing the key (do not hold) of F8 beginning immediately after that the sequence of power should bring you to the Advanced Boot Options menu.  Try again then press repeatedly the key rather than pressing on and now.

  The recovery CD Toshiba, you have probably does not allow a "repair installation".  Contact Toshiba to see if they will provide you with a suitable CD.

  Given the fact that you can get a useful place when you start with the Toshiba Recovery DVD, my guess is that the computer is OK but that the hard drive has failed - or maybe more likely - the startup information is damaged so that it does not start.  If you have access to a computer equipped with a burner, download and create a bootable Windows CD.

  There are a number of available bootable CD which include various recovery and diagnostic tools.  You'll have to do some research to find out how to use the tools.

  Ultimate Boot CD 4 Windows
  Ultimate Boot CD
  Hiren BootCD

  If you feel overwhelmed by the tools and I just want back the data, and then use the Toshiba Recovery DVD, make you a Knoppix CD and use this key to your data, preferably on a network connection.

  If all this sounds like too much for you - and there is no shame in admitting that--take the laptop for a good local computer repair shop (not a type BigBoxStoreUSA or rather GeekSquad) and ask them to check it out and make sure to recover your data before anything else.

• Windows XP does not start, no hard drive error

  I have windows XP installed on my hard drive of 160 GB WD Scorpio Blue PATA on a DELL Latitude D600. One day, I wake up and my laptop does not start. My computer starts up, leaves POST, but the hard drive does not start. He's right there. I try pressing the buttons but it starts a sound signal, so I have to turn it off. Normally, if there is no device that my computer can boot from it displays something along the lines, "no main boot device found. Press F1 to retry boot or F2 to enter the configuration utility. "but the screen does not show anything.
  I ran chkdisk and a number of other diagnostic tools on the hard drive, but nothing helped. I have Ubuntu on a USB key and with him, I can access the files on the hard drive - all files are intact, and I can read/write without problems. It just does not start.
  How would I go about fixing this? Any help is appreciated. It is the third hard drive that has failed inside my D600 (my second WD). I've had enough of this!

  Try to use the last good known Configuration:

  http://support.Microsoft.com/kb/307852

  and see if that clears things up to the top.

  Hope this helps

  Post back if necessary

  ____________________

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• does not start the last bars of microsoft, PAGE_FAULT_IN_NONPAGED_AREA windows vista system

  Please help send the laptop to repair costs more than the laptop... can I now an expensive paperweight? I remember well, here are the details:

  -bsod STOP: 0 x 00000050 (0xE967206E, 0 x 0, 00000002 00000000, 0X836A8510)

  -tried to restart, all options on F8 does not.

  -No installation disc available as it was only an upgrade to vista (tried the upgrade disc, didn't work)

  -recovery disk proven system of point of sale without success.

  -every time we it reboot go to the black screen with the bar where the green bars run on the side but always goes back to bsod.

  -System is an ACER EX4630-4126

  -BSOD popped up all while surfing internet

  -is the new software installed spybot s & d

  -can not run memtest because it does not start up vista

  -tried running the memory diagnostic tool but it shut down on me before completing the diagnosis

  Any help would be greatly appreciated. I'm not much of a person of the laymens terms computer wouldn't greatly appreciated. Thank you.

  Ainjel Hello,

  This occurs generally early in the boot process. For example, the problem may occur shortly after the splash screen appears, and you will see a black screen with a moving progress bar. Specifically, this problem occurs generally when the system tries to load the i8042prt.sys driver. The problem only occurs in certain hardware configurations.

  You need the installation disk so that you can try to perform a system restore which is the WinRE recovery environment and then once you are able to start, you can try to install the fix below:

  Error message when you start a Windows Vista-based computer: "STOP: 0 x 00000050 PAGE_FAULT_IN_NONPAGED_AREA".

  http://support.Microsoft.com/kb/939720

  Do a restore from WinRE system:

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  Kind regards

  Savan Microsoft technical support.

• I have Windows 7, my computer does not start. I did the Startup Repair and he won't fix it. I did the system configuration information

  I have Windows 7, my computer does not start. I did the Startup Repair and he won't fix it. I did the system configuration information. and that did not help. What to do now? The comment of Bios makes me fear that it could damage my computer forever. What should do? Help, please

  Hi Alan,

  Thanks for posting your query in Microsoft Community.

  I understand that the computer does not restart even after running Startup Repair and I will be happy to answer your query. I appreciate the efforts made to try to make it work. Let me ask you;

  • How do you run the Startup Repair?
  • Do you have Windows 7 repair disc?
  • Remember to no particular change in the computer before the show?
  • Have you plugged an external equipment, except the keyboard and mouse?
  • You are able to start the computer in safe mode?
  • What is the brand and model of the computer?

  Note: BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  There could be several reasons why he's not leaving including hardware as well. In addition, it could be because the master boot record (MBR) has been damaged. When you try to use the Startup Repair tool to repair the MBR, the Startup Repair tool indicates that no problem was found or it does not work yet.

  If you have any connected USB flash drive or other external devices connected to the computer, if you please, remove them and try to run the Startup Repair tool.

  If you haven't tried using Windows 7 repair disc, you can try the following:

  1. Insert the Windows 7 disc
  2. restart your computer
  3. When asked if you want to boot from your DVD player, do it.
  4. Select your language, click Next.
  5. click on repair your computer
  6. Select the operating system you want to repair.

  You can also perform the system restore by selecting the restore point when you think it worked very well. System Restore, choose advanced options using the disc.

  Important: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed after this date are deleted.

  I also recommend to contact the computer manufacturer to get the done diagnostic equipment.

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.