Pavilion elite e9110t windows 7 bluescreen crash

HP pavilion elite e9110t updated for win 7, I got 2 blue screen crashes today on goggle chrome with the following error codes

Signature of the problem:
Problem event name: BlueScreen
OS version: 6.1.7601.2.1.0.768.3
Locale ID: 1033

More information about the problem:
BCCode: d1
BCP1: B 00000000000000-0
BCP2: 0000000000000002
BCP3: 0000000000000000
BCP4: FFFFF88001770E9D
OS version: 6_1_7601
Service Pack: 1_0
Product: 768_1

What should I do?   I use chrome for this type.

Joey, I'm 66 years old.  Who says you can't teach an old dog new tricks.  More complicated these contraptions get more this type of problem occurs.  It seems to go in the territory.

Launch a game from a flash drive could certainly cause unique problems.  I've never tried, but each time that you connect a disk indirectly, this creates new circumstances.  I've been a player for many years.  I used a second drive to install my games, but decided to make more room in my case of medium-sized, so I removed the second disc.  This increases the air flow which is necessary for the high end games.

Good luck!

Tags: HP Desktops

Similar Questions

  • HP PAVILION ELITE D5200T - Windows 7?

    I have a HP PAVILION ELITE D5200T, which currently runs on Vista 64 - bit OS. Can it be upgraded to Windows 7? Are there compatibility issues I should know about?

    You should have no trouble at all, upgrade to or install Windows 7 on your desktop HP Pavilion Elite d5200t ATX CTO. Infact, HP has the drivers for Windows 7 on their "Software and downloads" page for your computer.

  • HP Pavilion Elite HPE: Windows Explorer can't see the folders/files

    My computer seems to have nuts. I have several times & suddenly (in minutes) began to receive messages "Windows Explorer is not responding", with choices such as "search solution and restart the program", "stop program", "wait." Also, it happened several times for Firefox.

    Right click on a folder on the desktop will block. In fact, who seemed to start the problem. I wanted to do a right-click & Delete a folder on the desktop.

    Can I use desktop shortcuts & open Office files, but I can't see the contents of the C drive, etc. Looks like it is filling when I click on "Computer", which will display all of the subfolders... a green bar moved from left to right at the top for more than an hour, but still no folders/files are displayed.

    It is now after midnight. I'll leave it as; non-stop. If all goes well, he rebuilds "pointers" or other & will be done by morning.

    Your computer is clean.

  • HP Pavilion elite e9000 (mother of IPIEL-LA3) - updated bios for RAM w / 4 GB DDR?

    Hello

    I bought a computer (custom config) Pavilion elite e9000 of costco in 2009, so I've offended have an exact model in 31 configurations HP number has for this model in the software support.  He had 6 GB (3 x 2 GB) DDR3 ram on a motherboard with Intel Core 2 Quad CPU @2.5 GHz IPIEL-A3...  Bought with Vista, now under Windows 7 64-bit

    Trying to speed up the computer (vs upgrade) and from what I can tell, 4 GB of RAM chips are not compatible with the motherboard.

    Try to understand if a BIOS upgrade would work, but the card BIOS upgrade mother IPIEL-LA3 throws an error 253.

    Y at - it an update to software that I can do to allow me to update the RAM (like to go to 12-16 GB of my 6 today)?

    Here are the specifications and configurable options for your desktop HP Pavilion Elite e9110t. Here are the specs because that's card mother IPIEL-A3 (Eureka3). According to specifications, your system supports the following memory configurations;

    Four DDR3 DIMM sockets (240 pin)

    Supports DIMM DDR3 2 GB modules

    Supports dual channel memory architecture

    PC3-8500 1066 MHz

    PC3-6400 800 MHz

    Memory non - ECC, unbuffered

    Supports up to 8 GB on 64 bit computers

    Supports up to 4 GB on 32-bit computers

    4 GB DDR3 DIMMS are not supported by this system. It's usually because that material (chipset) does not support sizes larger than those listed. In rare cases the limitation may have been imposed by HP in the BIOS. The update of the BIOS address not to increase the size memory or questions. Error 253 means that the BIOS is not for your system or your system does not meet the minimum requirements of the update. If you want to install the update in safe, you must install it to Vista.

    BIOS update 'sp43102.exe' requires a Microsoft Windows Vista operating system installed.

    Exit the: 2009-08-03

    Version: 5.05

    Compatibility: Microsoft Windows Vista, Microsoft Windows Vista (64-bit)

    Fix/development:
    Resolves a problem with USB not detected mass storage devices.

    Updates the boot order to place the optical drive before the hard drive.

    Resolves a problem with memory cards UDMA Ultra Direct Memory Access () see the incorrectly in Windows.

    Updates vBIOS to address issues HDMI.

    Updates the strategy thermal processor.

    Fixes an issue with the BIOS fault recovery if the card reader is connected.

  • Pavilion Elite HPE 450 t PC: desktop computer will not be updated for windows 7 64, Microsoft tried without success.

    I have a PC Pavilion Elite HPE 450 t, and a few months ago he ceased to accept automatic updates from Microsoft downloads.

    I tried to use the tools that Microsoft has nothing helped.

    Some time after, my Norton Security software security suite failed and wouldn't charge.  Norton failed to find a solution.  I guess it must do something with the heavy backlog of unloaded updates.

    ? Is it possible to load windows 10 on win 7?

    I got my PC tested for viruses, root kits and it is clean, but updates are still not loading.

    Honestly, I'd appreciate any help that you folk can provide.  Thanks in advance

    Leon R.

    Hi there @LROSZKOW,

    I hope you find your experience of positive Support Forum! It's a good place to find the help you need, other users, the HP experts and other members of the support staff. I understand that you have had problems with the updates of Windows and want to know if you can upgrade to Windows 10. I'm happy to help you with this.

    Reading the questions you have described in your current system that you cannot upgrade to Windows 10, using the normal method of free upgrade. Your system should have the option available from a previous update of Windows, as the free update is delivered via Windows update. If you have a Windows 7 or 8.1 product key, then you could do a clean install of Windows 10 and use this key to activate your Windows 10 free documents. Of course, you want to first make a backup of your data.

    Another option would be to try to load the original image from the desktop computer, and then try to update again by using Windows Update. This assumes you have a working recovery partition or recovery media. Computers HP - performing a recovery of system HP (Windows 7)  But to protect your data, you want to make a first backup as I mentioned.

    Please let me know if it works for you and if it does not solve your problem, please mark this message as a solution. Bravo would be appreciated as well.

  • HP Pavilion Elite HPE - 400z CTO: H - RS880 - Μatx Motherboard BIOS Update caused crash, to see a black screen now?

    I have a desktop HP Pavilion Elite HPE-400z running Windows 7 (64), my computer was working fine, however I thought that I needed to update the drivers and things from the HP website.

    The first thing I installed was the following: H - RS880 - Μatx Motherboard BIOS Update

    That restarted immediately frozen mouse on a black screen. When I turn on the computer the lights and the fan turns on but the screen remains black. Their is nothing wrong with the monitor, it's light is on, but when turn light it just says: "monitor going to sleep".

    I went through these troubleshooting pages: http://support.hp.com/us-en/product/HP-Pavilion-Elite-HPE-Desktop-PC-series/4269972/model/4300925/do...

    http://support.HP.com/us-en/product/HP-Pavilion-elite-HPE-400-desktop-PC-series/4269972/document/BPH...

    without success.

    Any other suggestions of what I could do to fix this?

    Hello

    Disconnect the PC and press and hold power for 30 seconds. Remove and replace the battery CMOS. It's a $4 item. Now let's see what happens. If no joy, then try the steps above once again.

    If your PC support has been changed or modified then put it back in its original state.

  • HP Pavilion Elete m94021: 64-bit Windows 7 keeps freezing without error on HP Pavilion Elite m94021 desktop PC

    Windows 7 64 bit continues to freeze without error on HP Pavilion Elite m94021 desktop PC.  He'll go sometimes for several hours without freezing it sometimes minutes. The problem seems to become more common.

    Thanks for the reply and information. I had read the document before and tried different options, including a resumption of systems.
    I brought the PC to a specialist, so far, they have not been able to find the problem. Would it be the Mo or graphics card?

  • Pavilion Elite m9340f: m9340f windows version upgrade from Vista 64

    I bought the Pavilion Elite m9340f in 2008, and the computer continues to work very well with the originally installed Vista 64-bit.

    I get notifications that both IE-9 that Google-Chrome 48.0.2564.103 m are no longer in charge and not working properly with many Web sites.

    I see a lot of people on the forums of the historical problems with Windows 7, 8 and 10 updates on the m9340f.  The HP support site clearly states that the m9340f has not been tested with Windows 8, and I don't see anything about HP confirming the test he m9340f with Windows 7 or 10.

    I am very careful about the updates of Windows does not properly with the hardware configuration of m9340f.  Can someone please give me some advice on the modernization of this machine for a version of windows that will allow me to have the features Google Chrome and IE, but will not do something elese to become non-functional.

    Thanks in advance,

    dberberick

    dberberick,

    The main reason I don't like the upgrade, is that the problems you had with the previous operating system tend to make their way in the new OS. You also have the previous residual files, which can cause problems.

    (1) what would be the result?

    If you haven't experienced or unfamiliar problems with Windows Vista, the upgrade to Windows 7 should be simple and without problems during migration.

    (2) what version of Windows 7?

    Unless you need functions of class Affairs (unique encryption, join a domain, etc.), it is not really a necessity for professionals.

    If you have any other questions, feel free to ask.

    Please click the White Star of KUDOS to show your appreciation

  • Pavilion Elite m9600t: OS reinstall for HD "Advanced format" on Windows Vista

    I have a HP Pavilion Elite m9600t desktop provided with Windows Vista. Recently my 640 GB Hitachi hard drive gone bad. I ordered a new one (Seagate 1 TB), installed and tried to reinstall the Vista operating system with the provided HP Vista recovery disks.

    During installation, the following message appeared: "installation of Windows could not configure windows to run on a hardware on this computer." I did research and found this happens on Vista with discs advanced formatting (AF). My new record is AF.

    I have read some threads on the forum of HP who say that you can always do the operating system installed, but you have to do by creating a new disc of installation with your product key, and then mix a partitioning in there. I'm confused on where to find the ISO files for Vista (64-bit SP1), as well as how to partition before installing the operating system, and which must be partitioned.

    I have a drive to upgrade Vista to Windows 7, but I can't use it until Vista is installed. Is there a way I can ignore the Vista installation process and move to Windows 7? Who could help me to avoid the issue of the AF.

    Thank you!

    Paul R

    Hello:

    You can check this link to know how to clean your drive of W7 upgrade installation.  I assume you have the W7 upgrade of the key product that will be necessary.

    http://helpdeskgeek.com/Windows-7/clean-install-Windows-7-using-an-upgrade-disc/

    Another thing you can try, is to format your new drive to NTFS MBR and get rid of the advanced formatting.

    You can use this disk management software and create a bootable CD, and if everything goes well after you format the disc as it was supposed to be for your PC, you can use the recovery discs if the clean install from a disk upgrade W7 does not (because of the problem of the AF).

    http://www.partitionwizard.com/free-partition-manager.html

    Tutorial on how to change from GPT to MBR...

    http://www.partitionwizard.com/help/initialize-to-MBR-disk.html#HOWTO

  • HP wireless keyboard from 2.4 GHz on the HP Pavilion Elite 083 Volume controls does not not in Windows 8

    I have a HP 2.4 GHz wireless keyboard on a desktop HP Pavilion Elite 083 UK:

    Model KG-08510 rev 1.1

    Product #ABU KZ256AA number

    Part number 505143-031

    .. Since the upgrade to Windows 8 Pro to Windows 7 Home Premium, I have problems with getting control of Volume +, - and disable keys on the keyboard to work reliably in Windows 8 Pro.

    In summary, the symptom is that when I start the PC from a start-up to cold which is a full power down of the State of the volume on the keyboard controls do not work.

    However, if I unplug and re - plug the USB wireless receiver that came the keyboard on the PC then on the keyboard volume controls begin to work again.

    I tried the following things to try to solve this problem:

    -Made a lot of new installation of Windows 8 i.e. reformatting the hard drive (no recovery) and fresh install Windows 8 on a blank hard drive.

    -Installation of Microsoft Windows all the updates available for the machine.

    -Manually install drivers wireless keyboard on the site of HP driver for my computer HP Pavilion Elite 083uk (this allows the screen display on to CapsLock and numlock which works reliably every time that I start).

    -Disable 'fast start up' in Windows 8 power settings

    -Using different USB ports on the back of the machine

    This question is re-producable each time and the keyboard volume buttons work fine even from boot cold when I was running Windows 7.

    I think that I have now found a solution / workaround to solve this case no matter who is interested.

    1. download and install the Microsoft "DevCon" tool that provides an interface to command line for Device Manager.

    Download and installation instructions are here:

    http://social.technet.Microsoft.com/wiki/contents/articles/182.how-to-obtain-the-current-version-of-device-console-utility-DevCon-exe.aspx

    2. create a Windows scheduled task with "highest privileges" that works on logon that issues the following command:

    DevCon restart 'HID\VID_03F0 & PID_0862 & REV_0105 & MI_01 & Col02'

    This restarts "HID-compliant consumer control device" that is listed in my device manager which is middle for the proper functioning of the volume control and mute buttons on the keyboard (keyboard functionality is via a separate driver which is not affected).

    NB. you need to replace ""HID\VID_03F0 & PID_0862 & REV_0105 & MI_01 & Col02"with whatever hardware ID is listed in the device for that Manager.»

    3. If the above does not work, then you must create a scheduled task to run a batch file with the following:

    DevCon disable 'HID\VID_03F0 & PID_0862 & REV_0105 & MI_01 & Col02'

    DevCon enable 'HID\VID_03F0 & PID_0862 & REV_0105 & MI_01 & Col02'

  • Example: Pavilion Elite m 9040: Solution Center HP for HP Photosmart C6280 all-in-one on Windows 7 Ultimate 64 bit

    Once I had the HP Solution Center. I would like to download again for a HP Photosmart C6280 all-in-one on Windows 7 Ultimate 64 bit but can not find the download. Anyone know where I can find and download? The computer is a HP Pavilion Elite m9040n PC.

    @JCL9

    Here you go...

    Your Web site Support Page printer - and full functionality Softaware for Windows 7:

    All-in-one printer, HP Photosmart C6280 range

    Help, information and examples:

    Install the full features software - printer

    When you see a post that will help you,

    Who inspires you, gives a cool idea,

    Or you learn something new.

    Click the 'Thumbs Up' on this post.

    My answer-click accept as Solution to help others find answers.

  • Windows will not install on the new drive for HP Pavilion Elite m9510f

    I have a HP Pavilion Elite m9510f operation with Windows Vista Home Premium 64 - bit SP1 and with a Seagate Barracuda 7200.11 HDD of 750 GB.

    The HARD drive broke down a few weeks ago and is unrecoverable.

    I bought Seagate 1 TB hard drive to replace the 750Go again and used the HP recovery discs provided by HP to wipe the disk and reinstall Windows on it.

    I can run all the recovery discs 3 without problem, the computer goes through its paces to reinstall Windows and all of a sudden, the computer stops and I get the message "installing Windows could not configure Windows to run on a hardware on this computer."

    What is happening with this?  I use a HARD drive with recovery disks provided by HP.

    HARD drive replacement need to be 750Go like the original?

    Any help would be appreciated

    Probably a problem with the hard drive being the new type of AF. Windows 7 with SP1 should work better than Vista... but your Vista key will not work with ISO download linked above.

  • HP Pavilion Elite HPE - 575 a desktop PC set up latest patch Windows 7 from Tuesday

    Hello

    My HP Pavilion Elite HPE - 575 a Desktop PC running Windows 7, 64 bit will not configure the last patch Tuesday, August 14, 2012 Windows. The computer seems if running all the updates correctly when stopping however the next time that you start it only configures approximately 30% before failing and then close to return to the previous state.

    Something has changed in the microsoft update that resolved itself after several days without doing me anything.

  • How to get the thumbnail pictures to show? I m using hp pavilion elite hpe with windows 7...

    My computer is a HP Pavilion Elite HPE. Windows 7 64-bit operating system. 16 GB OF RAM.

    My computer is unable to display thumbnail images of the photo files. If I want to see which image is behind the icon that I have to use another program to open and view the file photo... As I remember it was the problem from the beginning...

    All photo as PS and other programs show thumbnails in their browsers.

    Hello

    Here's something to check.

    Open windows control panel, open Folder Options, click the view tab and Remove the check mark next to "always show icons, never thumbnails".  Click on apply to save this change.

    Kind regards

    DP - K

  • USB ports do not respond after boot to Windows 7 - HP Pavilion Elite HPE

    I turned on a HP Pavilion Elite HPE this morning and none of the USB ports work under Windows 7.

    Mouse and USB keyboard work well in the BIOS Setup.  But after Windows starts, it is as if he found neither.

    I tried to start Windows in Safe Mode and last known good Configuration and the behavior is the same, the mouse and keyboard do not work even if they do it in the BIOS.

    I tried a different mouse and keyboard and Windows behavior is the same.

    Now, I would like to have active remote destop. Difficult to solve without an input device.

    I found a solution for Windows 7 x 64 failing to detect any USB device on all ports USB to a HP Pavilion Elite HPE-500f.

    After that backup, read and edit the registry remotely to run the utility of Microsoft Devcon registry run key, Devcon announce an error message 39 for USB hubs.  Enter 'Windows error 39 usb hub' in a search engine led me to the next web page that describes the resolution of the problem. I removed the UpperFilters also well described and restarted key and until then. -See more at: http://www.tricksguide.com/solve-device-manager-error-code-39-on-usb-controller.html

Maybe you are looking for