Pavilion G7-1355dx: card network problem

Similar Questions

• Pavilion 1320ex g6: card wifi problem

  Hello world

  I have problems with my wireless card that I want to buy a new internet form that can you tell me please which is compatible with my laptop
  
  in fact, I found this one:
  http://www.aliexpress.com/item/for-HP-Broadcom-BCM4313-mini
  don't you think that it can work on my laptop?

  Thank you

  Hi @MuhammadAkkad,

  The best card is Realtek 8188BC8 802.11a/b/g/n 2 x 2 WiFi and Bluetooth 3.0 + HS Combo Adapter part # 602993-001. It covers most of the 2 x 2 (fast) of network types. It has bluetooth, so you can add bluetooth speakers.  A friends listen to music to computer anywere in the House, taking the speaker with her.

  Hope this helps

• ESXi 3.5 Update 4 on dc7800 - card NETWORK problem

  Here is my experience with ESXi 3.5 on HP dc7800 USB Flash Drive Upd.4 connecting...

  Just after the start, integrated NIC is not visible. If I insert adapter Intel PRO/1000 GT PCI I see two network cards, da'aboth of them work... If I remove PCI NIC, integrated NIC disappears...

  Any ideas for the workaround?

  I mind not with any of the oem.tgz file.  The script should ask about the change simple.map and at this time there, you can add PCI id for your device.

• HP Pavilion dv6-1355dx: laptop startup problems and lost product key

  My laptop is not starting. I get the message "device not found Boot. Please install the operating system on your hard disk "." I tried the steps listed on the HP website (step 1: Hard reset, step 2: restore default BIOS settings, step 3: hard disk Test, step 4: reconnect the hard drive, step 5: System Recovery), but the problem persists.

  Please guide me in the following things.
  1. What can be done to fix this? I got control of the laptop of one of the centres of local services. They said that there is a problem with the hard drive. I'll have to get the replaced disk. I have no other option?
  2. I bought my laptop in 2009. It came with Windows 7 Edition home premium. Now, I don't have a product key to reinstall the same copy of windows 7. Also, I am not able to connect to the laptop because of that I won't be able to retrieve the product key from your laptop. The sticker on the back of the laptop is not more readable. It hits the major options to retrieve the key. Is there another method by which I can retrieve the key? So far, I used to restore my computer laptop settings every time I need to format my laptop.

  3. the only thing I have with me are recovery disks (3 in total). These will be of any help in order to get the windows installed on the new hard drive? Other suggestions pls?

  Looks like a bad HDD. Your product key of WIn7 which carried out the sticker on the underside of your laptop. You must get the HP HP recovery or 3rd party disc to restore your system to the rear. And there's a good chance your HARD drive is bad and must be replaced.

  We also support hp user forum service not a HP.

  HP computers - get HP recovery disks or HP USB recovery disc
  Read this before ordering your recovery discs! (United States and Canada only)
  End of life office computer and computer laptop recovery sets

• Network of HP Pavilion G6-2244NR, usb, wireless problems after downgrade to Windows 7

  HP Pavilion G6-2244NR network problems.  Okay, so I have a G6-2244NR I had to downgrade to Windows 7 Pro 64 (SP1), due to software compatibility issues.  Install was initially conducted on UEFI, GPT, wiped 8 and started from scratch with Legacy support MBR.  Installation went perfectly well.  However, I start in 7 and I get the network icon showing a red X.  I then go into Manager and note that there is no network listed devices.  Instead, I have 8 devices listed under "Other devices" with yellow exclamations by each of them.  This includes the Bluetooth controller, the network, a PCI device controller, Ethernet controller, SM Bus controller, two USB controllers and an "unknown device".  Bluetooth ID is ven_1814 & dev 3298, Ethernet ID PCI\VEN_10EC & DEV_8136 and so on.  I downloaded the drivers on the wazoo.  I think that I have updated the chipset but know not so straight updates chipset (catalyst 12.6).  Still no luck.  Whenever I have try and install what I think are good drivers I get the error "device works not ' on the LAN card.  Can anyone help?

  A Wi - Fi connection

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=3688868&swItem=ob-111782-1&mode=4&IDX=1

  Ethernet

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=13&pfid=5&level=5&Conn=4&DownTypeID=3&GETDOWN=false

• HP Pavilion dv6 - 2173cl: card driver HP Pavilion dv6 - 2173cl Entertainment Notebook PC with windows 8.1 Sound

  After upgrade to windows 8 for windows 8.1 my laptop HP Pavilion dv6 - 2173cl has a problem with the card (no sound at all).  I went to HP.com but there is no driver for window 8.1 sound card.  What should I do now... Help, please...

  Hello:

  See if it works...

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-124012-1&cc=us&DLC=en&LC=en&OS=4158&product=6521360&sw_lang=

• Vista unidentified network problem

  My HP G60 laptop under vista home premium got an "unidentified network" problem and not able to get on the internet. I even tried to reinstall vista to factory default, still the same problem with my wireless router.

  Spec:

  -HP G60 laptop computer, running vista Home premium 32-bit, with 3 GB of RAM

  -Belkin router

  -I am able to connect via a fine wired line but with a Wi - Fi, it shows constantly 'unidentified network', even if I changed the Private mode in network and sharing Center.

  -J' tried the following: listed an SSID different router, reset the router by default, to reinstall vista, tried other mechanisms, such as specified in the forum, with no difference

  -When you configure the router, I have clone MAC of the laptop to the router to get the connection with Comcast, has done that with network cable connected, internet connection worked well after cloning.

  -no virus SW installed.

  Any suggestions on what might be the solution here? Thank you.

  Hello

  It seems that something is blocking the wireless to connect to the wireless router and to obtain a valid IP address.

  Maybe this can help.

  These steps and tell us where is the breaking point.

  Check the Device Manager for the wireless card valid entry.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  Check network connections to make sure that you have a network icon/entry wireless connection, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  ------------------

  The wireless card drivers much also install utility wireless of the seller.

  Make sure that if there are teas from Wireless Utility of seller does not work with the native Windows wireless utility (Service WLAN).

  ----------------

  Make sure you firewall No. preventing / blocks wireless components to join the network.

  Some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible set up the firewall correctly, otherwise totally uninstall and get rid of its remaining processes that permit the own local network traffic flow.

  If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  party like Hello and NetMagic 3rd network managers can block local traffic too.

  ---------------------------

  Stack TCP/IP work should look like.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  http://www.ezlan.NET/Win7/status-NIC.jpg

  Description is the data of the card making.

  The physical address is MAC of the card number.

  The xx must be a number between 0 and 255 (all xx even number).

  YY should be between 0 and 255

  ZZ should be between 0 and 255 (zz all the same number.)

  The date of the lease must be valid at the present time.

  * Note 1. IP that starts with 169.xxx.xxx.xxx isn't valid functional IP.

  * Note 2. There could be an IPv6 entries too. However, they are not functional for Internet or LAN traffic. They are necessary for Win 7 homegroup special configuration.

  ---------------------------------------------------

  A message in the small window that says connected wireless doesn't means that you are really a valid functional connection.

  Above everything is OK, you must be able to connect to the router.

  Connection to the router means that you can enter the IP of the router base in an address bar in one go, being able to connect and configure the router menus see.

  If it doesn't connect to the router, journal newspaper from any computer that can connect to the router wirelessly with a wire, disable wireless security, make sure that the wireless SSID broadcast is enabled and try to connect with no. wireless security.

  Enable security wireless after you eat to make a functional connection.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Here are two correct graphics for the Pavilion dv7-4270us cards:

  Here are two correct graphics for the Pavilion dv7-4270us cards: ATI Mobility Radeon 6370 AND AMD880G with ATI Mobility Radeon HD 4250?

  An overview chart problems and need to ensure.

  Well, after all the day I found my answer in a review of this laptop on amazon.  That is this HP forum.  I never get help here.

• ordered a pavilion with graphics card upgrade, upgrade used only 16-bit location

  ordered a pavilion with graphics card upgrade, upgrade used only 16-bit location. I want to connect a second monitor, can I use the parent connections card currently have coverage through them that say "do not remove"?

  Hello

  If you use an adapter, then you have the choice on the end to use the adapter based on the adapter that you use. Buy cable HDMI to DVI and save frustration adapter problems and possible.

• A Gemplus card driver problem

  Hello

  I need a help. I got a GemClub-memo card to work on. Whenever I connect it to my machine windows via a reader from SCM, it's show could not load the driver for card while the card reader is successfully launched. I am able to communicate the card properly via commands such as ScardTransmit, ScardStatus. My main questions are:

  1. during indexing through the map, map does not show the PIN code window.

  2. in the device driver page, it displays a YELLOW exclamation point in device driver page.

  Can you please help me solve this problem? Please let me know if I'm missing something

  Hi I_m_Ginnie,

  Thanks for posting the query on Microsoft Community.

  I'm sorry to know that you are unable to use the Gemplus card reader. Don't worry, will help you with the question.

  Try to run hardware store and check if it helps.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  If the problem persists, then update (where it is showing the exclamation point), the driver through Windows Update or the manufacturer's website and check if that helps.

  Update drivers in Windows 7:

  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win81tab1&V2H=win7tab5&V3H=winvistatab1&v4h=winxptab1

  For more information:

  Smart card troubleshooting guide

  https://TechNet.Microsoft.com/en-us/library/dd979536 (WS.10) .aspx

  I hope this helps to solve the issue. If the problem persists, get back to us. We will be happy to help you.

• PE2950 intermittent network problems

  Hey guys, I have a PE2950 running Windows 2008 R2. It's a (non-primary) domain controller and I'm having all sorts of problems with replication errors. I also have problems with DNS errors.

  When I log on the 2950 and run nslookup ifc.local, sometimes it comes complete with success immediately. Then if I run it again a few seconds later, it expires. I checked the reverse on both servers search areas and have the correct PTR records (it seems) and points NIC of each server to the other server, and then to his self for DNS. There are forwarders in DNS records, but not on the network card. I seem to have no problem with the PDC network (a 1950).

  It seems that my network problem is intermittent and can be hardware/driver related, but I'm not sure. One thing I found interesting is that if I try to activate IPV6 on the 2950's NIC, I receive an error message that says I need to install a network card in order to configure TCP/IP, but there is clearly a here and IP4 is set up very well.

  IPconfig shows also two cards tunnel I'm not familiar with. Clear that they are not used. I would like to disable some how?

  Here are the results of an ipconfig/all and nslookup example. Of course, when I went to this post, I couldn't nslookup to expire, but when he does I have server: UNKNOWN and IP address correct and therefore three lines of time-out.

  Thanks in advance for any help you can offer!

  Windows IP Configuration
  
     Host Name . . . . . . . . . . . . : IFCServer2
     Primary Dns Suffix  . . . . . . . : IFC.local
     Node Type . . . . . . . . . . . . : Hybrid
     IP Routing Enabled. . . . . . . . : No
     WINS Proxy Enabled. . . . . . . . : No
     DNS Suffix Search List. . . . . . : IFC.local
  
  Ethernet adapter Local Area Connection:
  
     Connection-specific DNS Suffix  . :
     Description . . . . . . . . . . . : Broadcom BCM5708C NetXtreme II GigE (NDIS VBD Client)
     Physical Address. . . . . . . . . : 00-1C-23-CF-7E-6E
     DHCP Enabled. . . . . . . . . . . : No
     Autoconfiguration Enabled . . . . : Yes
     IPv4 Address. . . . . . . . . . . : 192.168.2.11(Preferred)
     Subnet Mask . . . . . . . . . . . : 255.255.255.0
     Default Gateway . . . . . . . . . : 192.168.2.1
     DNS Servers . . . . . . . . . . . : 192.168.2.10
                                         192.168.2.11
     NetBIOS over Tcpip. . . . . . . . : Disabled
  
  Tunnel adapter isatap.{865DC311-438F-4420-9B23-0062AF1CFBE5}:
  
     Media State . . . . . . . . . . . : Media disconnected
     Connection-specific DNS Suffix  . :
     Description . . . . . . . . . . . : Microsoft ISATAP Adapter
     Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
     DHCP Enabled. . . . . . . . . . . : No
     Autoconfiguration Enabled . . . . : Yes
  
  Tunnel adapter Teredo Tunneling Pseudo-Interface:
  
     Media State . . . . . . . . . . . : Media disconnected
     Connection-specific DNS Suffix  . :
     Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
     Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
     DHCP Enabled. . . . . . . . . . . : No
     Autoconfiguration Enabled . . . . : Yes
  
  /////////////////////////////////////////////////////////////////////////////////////////////
  

  Server:  ifcserver1.ifc.local
  Address:  192.168.2.10
  
  Name:    ifc.local
  Addresses:  192.168.2.11
        192.168.2.10
  

  Is that what your firmware up-to-date?  There were several problems with these early s NICS that have been addressed through firmware updates and driver (drivers was with 2003... have not heard anything specific about 2008).  You need to update your BIOS and ESM before updated the firmware of the NETWORK adapter.

• ESXi network problem

  I have a strange problem of networking with ESXi, my infrastructure is described below:

  I'm under vCenter 5.5 on a VCSA (5.5.0 update 2d, Build 2442330). The environment is a mixture of ESXi 5.1 (especially U2) and 5.5U1a. We have 1 primary site with 5 sites all remote connected via GRE VPN tunnels, The VCSA is in the main site, each remote site has at least 1 ESXi server managed by the VCSA. Each remote site has independent internet so for each site, the basic router (which ends the GRE VPN) routes inside networks (essentially 10.0.0.0/8) through the tunnel and has a default route to the local firewall. ESXi boxes that are not configured with the router as the default gateway, none of the custom static routes have been added to ESXi.

  Two of my remote sites (a site has two servers ESXi, the other has a site) ESXi servers keep losing contact with vCenter. Nothing else on these networks is never a problem to talk to the main site, including talking to the VCSA. Three servers are different versions of 5.1. Here's what I've done for troubleshooting:

  1. ESXi can ping on virtually any host through the tunnel to the main site with the exception of the VCSA.
  2. I isolated my network management in ESXi to a physical NETWORK card and made a SPAN on the switch port, a capture of packets revealed that when the rattling of the VCSA ESXi put the packet on the wire with a destination MAC of the firewall. For all the other hosts on the main site of subnet ESXi sends the packet with a destination MAC address of the core router. Packet capture on ESXi itself (using tcpdump-uw) shows the same thing.
  3. The ARP tables on all hosts show correct MAC addresses for the router base and the firewall.
  4. Make a "vmkping - I vmk0 - N < core router > < VCSA >" succeeds (destination MAC is correct in this case).
  5. Add a static route to ESXi to the address of the VCSA force it to the top of base does not work, ESXi continues to send the packet to the Mac static routes these firewall have been removed after the failed test of workaround.
  6. Restart the host will solve the problem for a short time.

  Some info:

  These three server 1 is an IBM x 3300 M4 using Intel I350 GB network cards, the other two are R620s from Dell. The R620s each have 1 4-port Broadcom BCM5720-1 4 Intel 82580 ports. IPv6 has been disabled on all three hosts. Right now vmk0 is linked to an Intel NETWORK card on three servers, but barely I started to watch it, so I don't know if we saw the problem with vmk0 with a Broadcom.

  The Dells are inherited, so we have not done installs it but I reinstalled one of them yesterday (it was 5.1 U2 I reinstalled 5.1 U3) at the request of support for VMware. Support noted that the firmware and drivers were outdated and did not meet the HCL for those who have been updated when I reinstalled.

  IBM has been purchased and installed by our care last summer, firmware and drivers correspond to this LIST with the exception of the version of the BIOS that is a future release (it corresponds to the HCL for 5.5).

  I have a pension case, SR 15633456803. Initially, they tried to blame the network. Although it is clear to me that this is not a network problem, I put a case of Cisco in any way. Cisco has quickly threw the evidence I had gathered and made the same determination. The only way that this could be a network problem is with ProxyARP. ProxyARP is disabled on my firewalls, ESXi has correct ARP tables and when you talk to anything on the main network, in addition to the VCSA it sends the packet to the MAC address so clearly not a question of ProxyARP. At this point VMware said essentially that they are running out of ideas. I hope my reinstalled host stay online for more than a week, then I'll reinstall the other two hosts and call it a day if all goes well, but I'm preparing for the possibility that may not happen.

  We never seen anything like this or have any ideas?

  I understand the problem, ESXi does not correctly release the generated ICMP redirects. You can force the issue by restarting the vmk0 interface (or any port of kernel VM is your management interface) VMware KB: Internet control management protocol redirects, because a permanent fix I will disable ICMP redirects on my routers.

• Cannot download the software due to a network problem

  Hi all I'm on MacBook Pro (retina, 15 inches, end of 2013).
  I try to install Windows 10 with the version downloaded from the Microsoft Web site.
  I finished uploaded and am trying to use Boot Camp to install Windows 10.
  However, I faced a question and it is that he "cannot download the software due to a network problem".
  I'm stuck here for an hour and I can't find a solution.
  I did all right until now by the following online tutorial but it prevents me to continue.
  Any help will be appreciated.
  Thank you.

  It is a very common problem. To fix this, first try to start your Mac in safe mode by following these steps-> safe mode try if your Mac does not commissioning - Apple Support

  Then, restart your Mac as usual and try to download the Windows support software again.

• HP Pavilion g7-1355dx Notebook PC processor upgrade

  I have a HP Pavilion g7-1355dx Notebook PC with a processor AMD A6 - 3420 Mr. I want to switch to the Intel® Core™ i7-4790 K, Intel® Core™ i7 - 4790 S or Intel® Core™ processor i7-4790.

  1 are these processors intel compatible. with my system (motherboard, graphics, chipset)

  2. If 'yes', then where can I find DETAILED procedure and what other components would need to be changed?

  3. If 'no' then what processors are compatible and where can find a DETAILED procedure?

  Hello

  The processor is not welded. But you can't replace AMD to Intel. You must watch the sockets and chipsets.

  Thank you

• Pavilion dv6-1355dx: need to raid scsi driver

  Hi all.

  I have a laptop Pavilion Dv6-1355dx who originally Windows 7 above. I would like to downgrade to Windows XP 64 Bit and I need scsi-raid for hard disk driver.

  If you have a download link, could you please send to me.

  Thank you

  Hello:

  I have compressed upwards and attached storage controller drivers you need for your laptop below.

  You can read the link below the section of Intel, and then read the downloadable document for how to integrate all the drivers.

  http://h30434.www3.HP.com/T5/notebook-operating-system-and-recovery/SATA-drivers-for-XP-solution-on-0x0000007B-BSOD/m-p/114120/highlight/true#M17758